#!/usr/bin/env python # -*- coding: utf-8 -*- ## @~chinese 设备类型定义 @~english Device Type Definition MV_UNKNOW_DEVICE = 0x00000000 ## @~chinese 未知设备类型，保留意义 @~english Unknown Device Type, Reserved MV_GIGE_DEVICE = 0x00000001 ## @~chinese GigE设备 @~english GigE Device MV_1394_DEVICE = 0x00000002 ## @~chinese 1394-a/b 设备 @~english 1394-a/b Device MV_USB_DEVICE = 0x00000004 ## @~chinese USB 设备 @~english USB Device MV_CAMERALINK_DEVICE = 0x00000008 ## @~chinese CameraLink设备 @~english CameraLink Device MV_VIR_GIGE_DEVICE = 0x00000010 ## @~chinese 虚拟GigE设备 @~english Virtual GigE Device MV_VIR_USB_DEVICE = 0x00000020 ## @~chinese 虚拟USB设备 @~english Virtual USB Device MV_GENTL_GIGE_DEVICE = 0x00000040 ## @~chinese 自研网卡下GigE设备 @~english GenTL GigE Device MV_GENTL_CAMERALINK_DEVICE = 0x00000080 ## @~chinese CameraLink设备 @~english GenTL CameraLink Device MV_GENTL_CXP_DEVICE = 0x00000100 ## @~chinese CoaXPress设备 @~english GenTL CoaXPress Device MV_GENTL_XOF_DEVICE = 0x00000200 ## @~chinese XoF设备 @~english GenTL XoF Device MV_GENTL_VIR_DEVICE = 0x00000800 ## @~chinese 虚拟采集卡下的设备，不支持虚拟GEV采集卡下的设备 @~english GenTL Virtual Device,not supports GenTL virtual GigE device ## @~chinese 采集卡类型 @~english Interface type MV_GIGE_INTERFACE = 0x00000001 ## @~chinese GigE Vision采集卡 @~english GigE Vision interface MV_CAMERALINK_INTERFACE = 0x00000004 ## @~chinese Camera Link采集卡 @~english Camera Link interface MV_CXP_INTERFACE = 0x00000008 ## @~chinese CoaXPress采集卡 @~english CoaXPress interface MV_XOF_INTERFACE = 0x00000010 ## @~chinese XoFLink采集卡 @~english XoFLink interface MV_VIR_INTERFACE = 0x00000020 ## @~chinese 虚拟采集卡 @~english Virtual interface MV_LC_INTERFACE = 0x00000040 ## @~chinese 光源控制卡 @~english Light Controller interface INFO_MAX_BUFFER_SIZE = 64 ## @~chinese 最大的数据信息大小 @~english Maximum data information size MV_MAX_TLS_NUM = 8 ## @~chinese 最多支持的传输层实例个数 @~english The maximum number of supported transport layer instances MV_MAX_DEVICE_NUM = 256 ## @~chinese 最大支持的设备个数 @~english The maximum number of supported devices MV_MAX_INTERFACE_NUM = 64 #< \~chinese 最大支持的采集卡数量 @~english The maximum number of Frame Grabber interface supported MV_MAX_SERIAL_PORT_NUM = 64 ## @~chinese 最大支持的串口数量 @~english The maximum number of serial port supported MV_MAX_GENTL_IF_NUM = 256 ## @~chinese 最大支持的GenTL数量 @~english The maximum number of GenTL supported MV_MAX_GENTL_DEV_NUM = 256 ## @~chinese 最大支持的GenTL设备数量 @~english The maximum number of GenTL devices supported ## @~chinese 设备的访问模式 @~english Device Access Mode ## @~chinese 独占权限，其他APP只允许读CCP寄存器 @~english Exclusive authority, other APP is only allowed to read the CCP register MV_ACCESS_Exclusive = 1 ## @~chinese 可以从5模式下抢占权限，然后以独占权限打开 @~english You can seize the authority from the 5 mode, and then open with exclusive authority MV_ACCESS_ExclusiveWithSwitch = 2 ## @~chinese 控制权限，其他APP允许读所有寄存器 @~english Control authority, allows other APP reading all registers MV_ACCESS_Control = 3 ## @~chinese 可以从5的模式下抢占权限，然后以控制权限打开 @~english You can seize the authority from the 5 mode, and then open with control authority MV_ACCESS_ControlWithSwitch = 4 ## @~chinese 以可被抢占的控制权限打开 @~english Open with seized control authority MV_ACCESS_ControlSwitchEnable = 5 ## @~chinese 可以从5的模式下抢占权限，然后以可被抢占的控制权限打开 @~english You can seize the authority from the 5 mode, and then open with seized control authority MV_ACCESS_ControlSwitchEnableWithKey = 6 ## @~chinese 读模式打开设备，适用于控制权限下 @~english Open with read mode and is available under control authority MV_ACCESS_Monitor = 7 ## @~chinese 信息类型 @~english Information Type MV_MATCH_TYPE_NET_DETECT = 0x00000001 ## @~chinese 网络流量和丢包信息 @~english Network traffic and packet loss information MV_MATCH_TYPE_USB_DETECT = 0x00000002 ## @~chinese host接收到来自U3V设备的字节总数 @~english The total number of bytes host received from U3V device ## @~chinese GigEVision IP配置 @~english GigEVision IP Configuration MV_IP_CFG_STATIC = 0x05000000 ## @~chinese 静态 @~english Static MV_IP_CFG_DHCP = 0x06000000 ## @~chinese DHCP @~english DHCP MV_IP_CFG_LLA = 0x04000000 ## @~chinese LLA @~english LLA ## @~chinese GigEVision网络传输模式 @~english GigEVision Net Transfer Mode MV_NET_TRANS_DRIVER = 0x00000001 ## @~chinese 驱动 @~english Driver MV_NET_TRANS_SOCKET = 0x00000002 ## @~chinese Socket @~english Socket ## @~chinese CameraLink波特率 @~english CameraLink Baud Rates (CLUINT32) MV_CAML_BAUDRATE_9600 = 0x00000001 ## @~chinese 9600 @~english 9600 MV_CAML_BAUDRATE_19200 = 0x00000002 ## @~chinese 19200 @~english 19200 MV_CAML_BAUDRATE_38400 = 0x00000004 ## @~chinese 38400 @~english 38400 MV_CAML_BAUDRATE_57600 = 0x00000008 ## @~chinese 57600 @~english 57600 MV_CAML_BAUDRATE_115200 = 0x00000010 ## @~chinese 115200 @~english 115200 MV_CAML_BAUDRATE_230400 = 0x00000020 ## @~chinese 230400 @~english 230400 MV_CAML_BAUDRATE_460800 = 0x00000040 ## @~chinese 460800 @~english 460800 MV_CAML_BAUDRATE_921600 = 0x00000080 ## @~chinese 921600 @~english 921600 MV_CAML_BAUDRATE_AUTOMAX = 0x40000000 ## @~chinese 最大值 @~english Auto Max ## @~chinese 异常消息类型 @~english Exception message type MV_EXCEPTION_DEV_DISCONNECT = 0x00008001 ## @~chinese 设备断开连接 @~english The device is disconnected MV_EXCEPTION_VERSION_CHECK = 0x00008002 ## @~chinese SDK与驱动版本不匹配 @~english SDK does not match the driver version MAX_EVENT_NAME_SIZE = 128 ## @~chinese 设备Event事件名称最大长度 @~english Max length of event name MV_MAX_NODE_NUM = 1024 ## @~chinese 最大节点个数 @~english Max Number of Nodes MV_MAX_NODE_NAME_LEN = 64 ## @~chinese 节点名称的最大长度 @~english Max Length of a Node Name MV_MAX_NODE_ERROR_NUM = 64 ## @~chinese 最大错误个数 @~english Max Number of Error MV_MAX_XML_SYMBOLIC_NUM = 64 ## @~chinese 最大XML符号数 @~english Max XML Symbolic Number MV_MAX_ENUM_SYMBOLIC_NUM = 256 ## @~chinese 最大枚举条目对应的符号数量 @~english Max Enum Entry Symbolic Number MV_MAX_SYMBOLIC_LEN = 64 ## @~chinese 最大枚举条目对应的符号长度 @~english Max Enum Entry Symbolic Number MV_MAX_SPLIT_NUM = 8 ## @~chinese 分时曝光时最多将源图像拆分的个数 @~english The maximum number of source image to be split in time-division exposure