zy-wcs.git - Gitblit

			@@ -119,89 +119,90 @@
			* 入库站，根据条码扫描生成入库工作档，工作状态 2
			*/
			public void generateStoreWrkFile() {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getInSta()) {
			// 获取入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			Short workNo = staProtocol.getWorkNo();
			// 尺寸检测异常
			boolean back = false;
			String errMsg = "异常：";
			if (staProtocol.isFrontErr()) {
			errMsg = errMsg+"前超限；";
			back = true;
			}
			if (staProtocol.isBackErr()) {
			errMsg = errMsg+"后超限";
			back = true;
			}
			if (staProtocol.isHighErr()) {
			errMsg = errMsg+"高超限";
			back = true;
			}
			if (staProtocol.isLeftErr()) {
			errMsg = errMsg+"左超限";
			back = true;
			}
			if (staProtocol.isRightErr()) {
			errMsg = errMsg+"右超限";
			back = true;
			}
			if (staProtocol.isWeightErr()) {
			errMsg = errMsg+"超重";
			back = true;
			}
			if (staProtocol.isBarcodeErr()) {
			errMsg = errMsg+"扫码失败";
			back = true;
			}
			// 退回
			if (back) {
			// led 异常显示
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			if (ledThread != null) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errMsg));
			try {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getInSta()) {
			// 获取入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			continue;
			}

			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk() && (workNo == 0 \|\| (workNo >= 9990 && workNo <= 9999))
			) {

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
			if (barcodeThread == null) {
			Short workNo = staProtocol.getWorkNo();
			// 尺寸检测异常
			boolean back = false;
			String errMsg = "异常：";
			if (staProtocol.isFrontErr()) {
			errMsg = errMsg + "前超限；";
			back = true;
			}
			if (staProtocol.isBackErr()) {
			errMsg = errMsg + "后超限";
			back = true;
			}
			if (staProtocol.isHighErr()) {
			errMsg = errMsg + "高超限";
			back = true;
			}
			if (staProtocol.isLeftErr()) {
			errMsg = errMsg + "左超限";
			back = true;
			}
			if (staProtocol.isRightErr()) {
			errMsg = errMsg + "右超限";
			back = true;
			}
			if (staProtocol.isWeightErr()) {
			errMsg = errMsg + "超重";
			back = true;
			}
			if (staProtocol.isBarcodeErr()) {
			errMsg = errMsg + "扫码失败";
			back = true;
			}
			// 退回
			if (back) {
			// led 异常显示
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			if (ledThread != null) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errMsg));
			}
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {

			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk() && (workNo == 0 \|\| (workNo >= 9990 && workNo <= 9999))
			) {

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if (!Cools.isEmpty(barcode)) {
			// News.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode)\|\| "00000000".equals(barcode)) {
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode) \|\| "00000000".equals(barcode)) {
			// staProtocol.setWorkNo((short) 32002);
			// staProtocol.setStaNo(inSta.getBackSta().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

			// led 异常显示
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			// led 异常显示
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			}
			continue;
			}
			continue;
			}
			} else {
			} else {
			// staProtocol.setWorkNo((short) 32002);
			// staProtocol.setStaNo(inSta.getBackSta().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			@@ -213,42 +214,42 @@
			// String errorMsg = "扫码失败，请重试";
			// MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			// }
			continue;
			}
			continue;
			}

			// 过滤盘点/拣料/并板任务
			WrkMast wrkMast1 = wrkMastMapper.selectPickStepByBarcode(barcode);
			if (null != wrkMast1) {
			continue;
			}
			// 过滤盘点/拣料/并板任务
			WrkMast wrkMast1 = wrkMastMapper.selectPickStepByBarcode(barcode);
			if (null != wrkMast1) {
			continue;
			}

			// 判断重复工作档
			WrkMast wrkMast2 = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			if (wrkMast2 != null) {
			News.error("工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast2.getWrkNo());
			continue;
			}
			// 判断重复工作档
			WrkMast wrkMast2 = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			if (wrkMast2 != null) {
			News.error("工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast2.getWrkNo());
			continue;
			}

			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			SearchLocParam param = new SearchLocParam();
			param.setBarcode(barcode);
			param.setIoType(1);
			param.setSourceStaNo(inSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v2")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			Integer code = jsonObject.getInteger("code");
			if (code.equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			// plc 处理
			barcodeThread.setBarcode("");
			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			SearchLocParam param = new SearchLocParam();
			param.setBarcode(barcode);
			param.setIoType(1);
			param.setSourceStaNo(inSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v2")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			Integer code = jsonObject.getInteger("code");
			if (code.equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			// plc 处理
			barcodeThread.setBarcode("");
			// staProtocol.setWorkNo(dto.getWorkNo().shortValue());
			// staProtocol.setStaNo(dto.getStaNo().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			@@ -258,45 +259,50 @@
			// throw new CoolException("更新plc站点信息失败");
			// }

			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep11(inSta.getStaNo());
			if (wrkMast == null) { continue; }

			// 更新工作主档
			wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error("更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			}

			} else if (code == 500){
			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			ledThread.setLedMk(false);
			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep11(inSta.getStaNo());
			if (wrkMast == null) {
			continue;
			}
			}
			News.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v2", JSON.toJSONString(param), response);
			} else if (code == 700) {

			// 更新工作主档
			wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error("更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			}

			} else if (code == 500) {
			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			ledThread.setLedMk(false);
			}
			}
			News.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v2", JSON.toJSONString(param), response);
			} else if (code == 700) {
			// staProtocol.setWorkNo((short) 32002);
			// staProtocol.setRollback102(1);//102站回退信号
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(5, staProtocol));

			// led 异常显示
			if (ledThread != null) {
			String errorMsg = barcode + "托盘识别异常，请先进行组托！";
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			ledThread.setLedMk(false);
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = barcode + "托盘识别异常，请先进行组托！";
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			ledThread.setLedMk(false);
			}
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			}
			} catch (Exception e) {
			e.printStackTrace();
			}
			}