#

luxiaotao1123

2022-03-03 7d2c445d4d27bf6a16eed7634e3b5eb1212620eb

#

 src/main/java/com/zy/core/ServerBootstrap.java

@@ -6,6 +6,7 @@
import com.zy.core.model.CrnSlave;
import com.zy.core.model.DevpSlave;
import com.zy.core.model.LedSlave;
import com.zy.core.model.SteSlave;
import com.zy.core.properties.SlaveProperties;
import com.zy.core.thread.*;
import lombok.extern.slf4j.Slf4j;
@@ -68,6 +69,10 @@
        for (Slave car : slaveProperties.getCar()) {
            MessageQueue.init(SlaveType.Car, car);
        }
        // 初始化穿梭车mq
        for (Slave ste : slaveProperties.getSte()) {
            MessageQueue.init(SlaveType.Ste, ste);
        }
    }

    private void initThread(){
@@ -78,6 +83,13 @@
            new Thread((Runnable) crnThread).start();
            SlaveConnection.put(SlaveType.Crn, crn.getId(), crnThread);
        }
        // 初始化穿梭车线程
        log.info("初始化穿梭车线程...................................................");
        for (SteSlave crn : slaveProperties.getSte()) {
            SteThread steThread = new SteThread(crn);
            new Thread((Runnable) steThread).start();
            SlaveConnection.put(SlaveType.Ste, crn.getId(), steThread);
        }
        // 初始化输送线线程
        log.info("初始化输送线线程...................................................");
        for (DevpSlave devp : slaveProperties.getDevp()) {

 src/main/java/com/zy/core/cache/MessageQueue.java

@@ -17,6 +17,8 @@

    // 堆垛机mq交换机
    private static final Map<Integer, LinkedBlockingQueue<Task>> CRN_EXCHANGE = new ConcurrentHashMap<>();
    // 穿梭车mq交换机
    private static final Map<Integer, LinkedBlockingQueue<Task>> STE_EXCHANGE = new ConcurrentHashMap<>();
    // 输送线mq交换机
    private static final Map<Integer, ConcurrentLinkedQueue<Task>> DEVP_EXCHANGE = new ConcurrentHashMap<>();
    // 条码扫描仪mq交换机
@@ -35,6 +37,9 @@
        switch (type) {
            case Crn:
                CRN_EXCHANGE.put(slave.getId(), new LinkedBlockingQueue<>(1));
                break;
            case Ste:
                STE_EXCHANGE.put(slave.getId(), new LinkedBlockingQueue<>(1));
                break;
            case Devp:
                DEVP_EXCHANGE.put(slave.getId(), new ConcurrentLinkedQueue<>());
@@ -64,6 +69,8 @@
        switch (type) {
            case Crn:
                return CRN_EXCHANGE.get(id).offer(task);
            case Ste:
                return STE_EXCHANGE.get(id).offer(task);
            case Devp:
                return DEVP_EXCHANGE.get(id).offer(task);
            case Barcode:
@@ -87,6 +94,8 @@
        switch (type) {
            case Crn:
                return CRN_EXCHANGE.get(id).poll();
            case Ste:
                return STE_EXCHANGE.get(id).poll();
            case Devp:
                return DEVP_EXCHANGE.get(id).poll();
            case Barcode:
@@ -109,6 +118,8 @@
        switch (type) {
            case Crn:
                return CRN_EXCHANGE.get(id).peek();
            case Ste:
                return STE_EXCHANGE.get(id).peek();
            case Devp:
                return DEVP_EXCHANGE.get(id).peek();
            case Barcode:
@@ -129,6 +140,9 @@
            case Crn:
                CRN_EXCHANGE.get(id).clear();
                break;
            case Ste:
                STE_EXCHANGE.get(id).clear();
                break;
            case Devp:
                DEVP_EXCHANGE.get(id).clear();
                break;

 src/main/java/com/zy/core/enums/SlaveType.java

@@ -8,6 +8,7 @@
    Led,
    Scale,
    Car,
    Ste,
    ;

    public static SlaveType findInstance(String s){

 src/main/java/com/zy/core/model/SteSlave.java

New file
@@ -0,0 +1,49 @@
package com.zy.core.model;

import com.zy.core.Slave;
import lombok.Data;
import lombok.EqualsAndHashCode;

import java.util.ArrayList;
import java.util.List;

/**
 * Created by vincent on 2020/8/10
 */
@EqualsAndHashCode(callSuper = true)
@Data
public class SteSlave extends Slave {

    private Integer rack;

    private Integer slot;

    private Boolean demo;

    // 穿梭车入库站点
    private List<CrnStn> steInStn = new ArrayList<>();

    // 穿梭车出库站点
    private List<CrnStn> steOutStn = new ArrayList<>();

    @Data
    public static class CrnStn {

        // 输送线plc编号
        private Integer devpPlcId;

        // 穿梭车站点编号
        private Integer staNo;

        // 排
        private Integer row;

        // 列
        private Integer bay;

        // 层
        private Integer lev;

    }

}

 src/main/java/com/zy/core/model/protocol/SteProtocol.java

New file
@@ -0,0 +1,251 @@
package com.zy.core.model.protocol;

import com.zy.asrs.entity.BasCrnp;
import com.zy.core.enums.CrnForkPosType;
import com.zy.core.enums.CrnLiftPosType;
import com.zy.core.enums.CrnModeType;
import com.zy.core.enums.CrnStatusType;
import lombok.Data;

/**
 * Created by vincent on 2020/8/7
 */
@Data
public class SteProtocol {

    /**
     * 1 = 手动模式
     * 2 = 自动模式
     * 3 = 电脑模式
     */
    public Short mode;

    public CrnModeType modeType;

    /**
     * 1 = 急停
     */
    public Short eStop;

    /**
     * 异常码
     */
    public Short alarm;

    /**
     * 任务号
     */
    public Short taskNo = 0;

    /**
     * 堆垛机当前状态
     * 0：空闲，无任务
     * 1：取货定位中
     * 2：取货中
     * 3：取货完成，放货定位中
     * 4：放货中
     * 5：回原点中
     * 6：反原点
     * 7：库位移位
     * 90：任务完成等待WCS确认
     * 99：报警
     */
    public Short status;

    /**
     * 状态枚举
     */
    public CrnStatusType statusType;

    /**
     * 堆垛机当前列号
     */
    public Short bay;

    /**
     * 堆垛机当前层号
     */
    public Short level;

    /**
     * 当前货叉位置
     * 0 = 货叉原位
     * 1 = 货叉在左侧
     * 2 = 货叉在右侧
     */
    public Short forkPos;

    public CrnForkPosType forkPosType;

    /**
     * 当前载货台位置
     * 0 = 下定位
     * 1 = 上定位
     */
    public Short liftPos;

    public CrnLiftPosType liftPosType;

    /**
     * 走行在定位
     * 0 = 在定位
     * 1 = 不在定位
     */
    public Short walkPos;

    /**
     * 载货台有物
     */
    public Short loaded;

    private Short temp1;

    private CrnTemp1 crnTemp1;

    private Short temp2;

    private Short temp3;

    private Short temp4;

    /**
     * 异常1
     */
    private boolean[] error1;

    private CrnError1 crnError1;

    /**
     * 异常2
     */
    private boolean[] error2;

    private CrnError2 crnError2;

    /**
     * 异常3
     */
    private boolean[] error3;

    private CrnError3 crnError3;

    /**
     * 异常4
     */
    private boolean[] error4;

    private CrnError4 crnError4;

    /**
     * 异常5
     */
    private boolean[] error5;

    private CrnError5 crnError5;

    /**
     * 异常6
     */
    private boolean[] error6;

    private CrnError6 crnError6;

    /**
     * X行走线速度m/min
     */
    private Float xSpeed;

    /**
     * Y行走线速度m/min
     */
    private Float ySpeed;

    /**
     * Z行走线速度m/min
     */
    private Float zSpeed;

    /**
     * 堆垛机累计走行距离km
     */
    public Float xDistance;

    /**
     * 堆垛机累计升降距离km
     */
    public Float yDistance;

    /**
     * 堆垛机累计走行时长h
     */
    public Float xDuration;

    /**
     * 堆垛机累计升降时长h
     */
    public Float yDuration;

    public void setMode(Short mode) {
        this.mode = mode;
        this.modeType = CrnModeType.get(mode);
    }

    public void setMode(CrnModeType type) {
        this.modeType = type;
        this.mode = CrnModeType.get(type).id.shortValue();
    }

    public void setForkPos(Short forkPos) {
        this.forkPos = forkPos;
        this.forkPosType = CrnForkPosType.get(forkPos);
    }

    public void setForkPos(CrnForkPosType type) {
        this.forkPosType = type;
        this.forkPos = CrnForkPosType.get(type).id.shortValue();
    }

    public void setLiftPos(Short liftPos) {
        this.liftPos = liftPos;
        this.liftPosType = CrnLiftPosType.get(liftPos);
    }

    public void setLiftPos(CrnLiftPosType type) {
        this.liftPosType = type;
        this.liftPos = CrnLiftPosType.get(type).id.shortValue();
    }

    public void setStatus(Short status){
        this.status = status;
        this.statusType = CrnStatusType.get(status);
    }

    public void setStatus(CrnStatusType type){
        this.statusType = type;
        this.status = CrnStatusType.get(type).id.shortValue();
    }

    public Short getTemp1() {
        return temp1;
    }

    public void setTemp1(Short temp1) {
        this.temp1 = temp1;
    }

    /**
     * 最近一次入出库类型
     *       I:入库
     *       O:出库
     */
    private String lastIo = "I";


    public BasCrnp toSqlModel(BasCrnp basCrnp){
        if (alarm!=null) {
            basCrnp.setCrnErr(alarm.longValue());
        }
        basCrnp.setWrkNo(taskNo.intValue());
        return basCrnp;
    }
}

 src/main/java/com/zy/core/properties/SlaveProperties.java

@@ -4,6 +4,7 @@
import com.zy.core.model.CrnSlave;
import com.zy.core.model.DevpSlave;
import com.zy.core.model.LedSlave;
import com.zy.core.model.SteSlave;
import lombok.Data;
import org.springframework.boot.context.properties.ConfigurationProperties;
import org.springframework.context.annotation.Configuration;
@@ -27,6 +28,8 @@

    private List<CrnSlave> crn = new ArrayList<>();

    private List<SteSlave> ste = new ArrayList<>();

    private List<DevpSlave> devp = new ArrayList<>();

    private List<Slave> barcode = new ArrayList<>();

 src/main/java/com/zy/core/thread/SteThread.java

New file
@@ -0,0 +1,408 @@
package com.zy.core.thread;

import HslCommunication.Core.Types.OperateResult;
import HslCommunication.Core.Types.OperateResultExOne;
import HslCommunication.Profinet.Melsec.MelsecMcNet;
import com.alibaba.fastjson.JSON;
import com.core.common.DateUtils;
import com.core.common.SpringUtils;
import com.core.exception.CoolException;
import com.zy.asrs.entity.BasCrnOpt;
import com.zy.asrs.entity.BasCrnp;
import com.zy.asrs.service.BasCrnOptService;
import com.zy.asrs.service.BasCrnpService;
import com.zy.core.ThreadHandler;
import com.zy.core.cache.MessageQueue;
import com.zy.core.cache.OutputQueue;
import com.zy.core.enums.CrnStatusType;
import com.zy.core.enums.CrnTaskModeType;
import com.zy.core.enums.SlaveType;
import com.zy.core.model.CrnSlave;
import com.zy.core.model.SteSlave;
import com.zy.core.model.Task;
import com.zy.core.model.command.CrnCommand;
import com.zy.core.model.protocol.CrnProtocol;
import com.zy.core.model.protocol.SteProtocol;
import lombok.Data;
import lombok.extern.slf4j.Slf4j;

import java.text.MessageFormat;
import java.util.Date;

/**
 * shuttle 穿梭车线程
 * Created by vincent on 2020/8/4
 */
@Data
@Slf4j
public class SteThread implements Runnable, ThreadHandler {

    private MelsecMcNet melsecMcNet;
    private SteSlave slave;
    private SteProtocol steProtocol;
    private short heartBeatVal = 1;
    private boolean resetFlag = false;

    public SteThread(SteSlave slave) {
        this.slave = slave;
    }

    @Override
    @SuppressWarnings("InfiniteLoopStatement")
    public void run() {
        this.connect();
//        try {
//            Thread.sleep(2000);
//        } catch (InterruptedException e) {
//            e.printStackTrace();
//        }
        while (true) {
            try {
                int step = 1;
                Task task = MessageQueue.poll(SlaveType.Ste, slave.getId());
                if (task != null) {
                    step = task.getStep();
                }
                switch (step) {
                    // 读数据
                    case 1:
                        readStatus();
                        break;
                    // 写入数据
                    case 2:
                        write((CrnCommand) task.getData());
                        break;
                    // 复位
                    case 3:
                        CrnCommand command = (CrnCommand) task.getData();
                        if (null == command) {
                            command = new CrnCommand();
                        }
                        command.setCrnNo(slave.getId()); // 堆垛机编号
                        command.setTaskNo((short) 0); // 工作号
                        command.setAckFinish((short) 1);  // 任务完成确认位
                        command.setTaskMode(CrnTaskModeType.NONE); // 任务模式
                        command.setSourcePosX((short)0);     // 源库位排
                        command.setSourcePosY((short)0);     // 源库位列
                        command.setSourcePosZ((short)0);     // 源库位层
                        command.setDestinationPosX((short)0);     // 目标库位排
                        command.setDestinationPosY((short)0);     // 目标库位列
                        command.setDestinationPosZ((short)0);     // 目标库位层
                        write(command);
                        break;
                    default:
                        break;
                }
                // 心跳
                heartbeat();
                Thread.sleep(500);
            } catch (Exception e) {
                e.printStackTrace();
            }

        }
    }

    /**
     * 初始化堆垛机状态
     */
    private void initSte() {
        if (null == steProtocol) {
            steProtocol = new SteProtocol();
        }
        steProtocol.setMode((short) -1);
//        crnProtocol.setTaskNo((short)0);
        steProtocol.setStatus((short)-1);
        steProtocol.setBay((short)0);
        steProtocol.setLevel((short)0);
        steProtocol.setForkPos((short) -1);
        steProtocol.setLiftPos((short) -1);
        steProtocol.setWalkPos((short)0);
        steProtocol.setLoaded((short)0);
        steProtocol.setAlarm((short)0);
        steProtocol.setXSpeed(0F);
        steProtocol.setYSpeed(0F);
        steProtocol.setZSpeed(0F);
        steProtocol.setXDistance(0F);
        steProtocol.setYDistance(0F);
        steProtocol.setXDuration(0F);
        steProtocol.setYDuration(0F);
    }

    @Override
    public boolean connect() {
        boolean result = false;
        melsecMcNet = new MelsecMcNet(slave.getIp(), slave.getPort());
        OperateResult connect = melsecMcNet.ConnectServer();
        if(connect.IsSuccess){
            result = true;
            OutputQueue.CRN.offer(MessageFormat.format( "【{0}】堆垛机plc连接成功 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.info("堆垛机plc连接成功 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】堆垛机plc连接失败！！！ ===>> [id:{1}] [ip:{2}] [port:{3}] ", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("堆垛机plc连接失败！！！ ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            initSte();
        }
//        melsecMcNet.ConnectClose();
        return result;
    }

    /**
     * 读取状态
     */
    private void readStatus(){
        try {
//            if (this.slave.getId() == 1 && flag1.equals(0)) {
//                Thread.sleep(3000);
//                flag1=1;
//                System.out.println("===");
//            }
            OperateResultExOne<byte[]> result = melsecMcNet.Read("D20", (short) 70);
            if (result.IsSuccess) {
                if (null == crnProtocol) {
                    crnProtocol = new CrnProtocol();
                }
                crnProtocol.setMode(melsecMcNet.getByteTransform().TransInt16(result.Content, 0));
                crnProtocol.setTaskNo(melsecMcNet.getByteTransform().TransInt16(result.Content, 2));
                crnProtocol.setStatus(melsecMcNet.getByteTransform().TransInt16(result.Content, 4));
                crnProtocol.setBay(melsecMcNet.getByteTransform().TransInt16(result.Content, 6));
                crnProtocol.setLevel(melsecMcNet.getByteTransform().TransInt16(result.Content, 8));
                crnProtocol.setForkPos(melsecMcNet.getByteTransform().TransInt16(result.Content, 10));
                crnProtocol.setLiftPos(melsecMcNet.getByteTransform().TransInt16(result.Content, 12));
                crnProtocol.setWalkPos(melsecMcNet.getByteTransform().TransInt16(result.Content, 14));
                crnProtocol.setLoaded(melsecMcNet.getByteTransform().TransInt16(result.Content, 16));
                crnProtocol.setAlarm(melsecMcNet.getByteTransform().TransInt16(result.Content, 18));
                crnProtocol.setTemp1(melsecMcNet.getByteTransform().TransInt16(result.Content, 20));
                crnProtocol.setTemp2(melsecMcNet.getByteTransform().TransInt16(result.Content, 22));
                crnProtocol.setTemp3(melsecMcNet.getByteTransform().TransInt16(result.Content, 24));
                crnProtocol.setTemp4(melsecMcNet.getByteTransform().TransInt16(result.Content, 26));
                crnProtocol.setXSpeed(melsecMcNet.getByteTransform().TransSingle(result.Content, 28));
                crnProtocol.setYSpeed(melsecMcNet.getByteTransform().TransSingle(result.Content, 32));
                crnProtocol.setZSpeed(melsecMcNet.getByteTransform().TransSingle(result.Content, 36));
                crnProtocol.setXDistance(melsecMcNet.getByteTransform().TransSingle(result.Content, 40));
                crnProtocol.setYDistance(melsecMcNet.getByteTransform().TransSingle(result.Content, 44));
                crnProtocol.setXDuration(melsecMcNet.getByteTransform().TransSingle(result.Content, 48));
                crnProtocol.setYDuration(melsecMcNet.getByteTransform().TransSingle(result.Content, 52));

                OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功",DateUtils.convert(new Date()), slave.getId()));

                // 复位信号
                if (crnProtocol.getStatusType().equals(CrnStatusType.WAITING)) {
                    log.error("-------------------------------------------第一步、[堆垛机号：{}][工作号：{}]==>> 状态为90，等待确认！！",slave.getId(),crnProtocol.getTaskNo());
                    if (resetFlag) {
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setAckFinish((short)1);
                        if (write(crnCommand)) {
                            resetFlag = false;
                        }
                    }
                }


                // 根据实时信息更新数据库
                BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
                BasCrnp basCrnp = new BasCrnp();
                basCrnp.setCrnErr(crnProtocol.getAlarm()==null?0:crnProtocol.getAlarm().longValue());
                basCrnp.setCrnNo(slave.getId());
                if (!basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                    log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
                }

            } else {
                OutputQueue.CRN.offer(MessageFormat.format("【{0}】{1}堆垛机plc状态信息失败",DateUtils.convert(new Date()), slave.getId()));
                throw new CoolException(MessageFormat.format( "堆垛机plc状态信息失败 ===>> [id:{0}] [ip:{1}] [port:{2}]", slave.getId(), slave.getIp(), slave.getPort()));
            }
        } catch (Exception e) {
            e.printStackTrace();
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            initCrn();
        }

    }

    /**
     * 写入数据
     */
    private boolean write(CrnCommand command){
        if (null == command) {
            log.error("堆垛机写入命令为空");
            return false;
        }
        command.setCrnNo(slave.getId());
        short[] array = new short[10];
        array[0] = command.getAckFinish();
        array[1] = command.getTaskNo();
        array[2] = command.getTaskMode();
        array[3] = command.getSourcePosX();
        array[4] = command.getSourcePosY();
        array[5] = command.getSourcePosZ();
        array[6] = command.getDestinationPosX();
        array[7] = command.getDestinationPosY();
        array[8] = command.getDestinationPosZ();
        array[9] = command.getCommand();
        OperateResult result = melsecMcNet.Write("D0", array);

        if (command.getAckFinish() == 0) {
            short commandFinish = 1;
            result = melsecMcNet.Write("D9", commandFinish);
        }

        try {
            // 日志记录
            BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
            BasCrnOpt basCrnOpt = new BasCrnOpt(
                    command.getTaskNo().intValue(),    // 任务号
                    command.getCrnNo(),    // 堆垛机[非空]
                    new Date(),    // 下发时间
                    command.getTaskModeType().toString(),    // 模式
                    command.getSourcePosX().intValue(),    // 源排
                    command.getSourcePosY().intValue(),    // 源列
                    command.getSourcePosZ().intValue(),    // 源层
                    null,    // 源站
                    command.getDestinationPosX().intValue(),    // 目标排
                    command.getDestinationPosY().intValue(),    // 目标列
                    command.getDestinationPosZ().intValue(),    // 目标层
                    null,    // 目标站
                    null,    // 响应结果
                    null,    // 修改时间
                    null    // 修改人员
            );
            bean.insert(basCrnOpt);
        } catch (Exception ignore) {}

        if (result.IsSuccess) {
            log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }

    @Override
    public void close() {
        melsecMcNet.ConnectClose();
    }

    /**
     * 心跳
     */
    private void heartbeat(){
        if (heartBeatVal == 1) {
            heartBeatVal = 2;
        } else {
            heartBeatVal = 1;
        }
        OperateResult write = melsecMcNet.Write("D10", heartBeatVal);
        if (!write.IsSuccess) {
            log.error("输送线plc编号={} 心跳失败", slave.getId());
        }
    }


    /******************************************************************************************/
    /**************************************** 测试专用 *****************************************/
    /*****************************************************************************************/
    public static void main(String[] args) throws InterruptedException {
        CrnSlave slave = new CrnSlave();
        slave.setId(1);
        slave.setIp("192.168.3.39");
        slave.setPort(5015);
        slave.setRack(0);
        slave.setSlot(0);
        SteThread melsecCrnThread = new SteThread(slave);
        melsecCrnThread.connect();
        melsecCrnThread.readStatus();
        System.out.println(JSON.toJSONString(melsecCrnThread.crnProtocol));

        // 1.入库 源和目标都发
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.PAKIN); // 任务模式
//        command.setSourcePosX((short) 1);     // 源库位排
//        command.setSourcePosY((short) 0);     // 源库位列
//        command.setSourcePosZ((short) 1);     // 源库位层
//        command.setDestinationPosX((short) 2);     // 目标库位排
//        command.setDestinationPosY((short) 3);     // 目标库位列
//        command.setDestinationPosZ((short) 1);     // 目标库位层
//        crnThread.write(command);

        // 2.出库 源和目标都发
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.PAKOUT); // 任务模式
//        command.setSourcePosX((short) 2);     // 源库位排
//        command.setSourcePosY((short) 4);     // 源库位列
//        command.setSourcePosZ((short) 3);     // 源库位层
//        command.setDestinationPosX((short) 1);     // 目标库位排
//        command.setDestinationPosY((short) 0);     // 目标库位列
//        command.setDestinationPosZ((short) 1);     // 目标库位层
//        crnThread.write(command);


//        // 3.库位移转   源和目标都发 pass
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(slave.getId()); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
//        command.setSourcePosX((short)2);     // 源库位排
//        command.setSourcePosY((short)2);     // 源库位列
//        command.setSourcePosZ((short)3);     // 源库位层
//        command.setDestinationPosX((short)2);     // 目标库位排
//        command.setDestinationPosY((short)4);     // 目标库位列
//        command.setDestinationPosZ((short)4);     // 目标库位层
//        crnThread.write(command);

        // 4.站位移转   源和目标都发
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(slave.getId()); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.SITE_MOVE); // 任务模式:  库位移转
//        command.setSourcePosX((short)1);     // 源库位排
//        command.setSourcePosY((short)0);     // 源库位列
//        command.setSourcePosZ((short)1);     // 源库位层
//        command.setDestinationPosX((short)2);     // 目标库位排
//        command.setDestinationPosY((short)0);     // 目标库位列
//        command.setDestinationPosZ((short)1);     // 目标库位层
//        crnThread.write(command);

//        // 5.回原点  不用发   pass
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式
//        command.setSourcePosX((short) 0);     // 源库位排
//        command.setSourcePosY((short) 0);     // 源库位列
//        command.setSourcePosZ((short) 0);     // 源库位层
//        command.setDestinationPosX((short) 0);     // 目标库位排
//        command.setDestinationPosY((short) 0);     // 目标库位列
//        command.setDestinationPosZ((short) 0);     // 目标库位层
//        crnThread.write(command);


        // 只有出现指定异常才进行复位
//        if (crnThread.crnProtocol.getCrnError2().leftTakeNoneErr
//                || crnThread.crnProtocol.getCrnError2().rightTakeNoneErr
//                || crnThread.crnProtocol.getCrnError2().leftPutLoadErr
//                || crnThread.crnProtocol.getCrnError2().rightPutLoadErr) {
//            CrnCommand command = new CrnCommand();
//            command.setCrnNo(1); // 堆垛机编号
//            command.setAckFinish((short) 1);  // 任务完成确认位
//            command.setTaskMode(CrnTaskModeType.NONE); // 任务模式
//            Thread.sleep(3000L);
//            crnThread.write(command);
//        }

    }

}

 src/main/resources/application.yml

@@ -70,92 +70,27 @@
      row: 3
      bay: 1
      lev: 1
  # 堆垛机2
  crn[1]:
    id: 2
    ip: 10.10.10.13
  # 穿梭车1
  ste[0]:
    id: 1
    ip: 10.10.10.10
    port: 8888
    rack: 0
    slot: 0
    # 偏移量，当堆垛机站点列号=1时，偏移量=2
    offset: 2
    demo: false
    # 堆垛机入库站点
    crnInStn[0]:
    # 穿梭车入库站点
    steInStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 102
      row: 6
      staNo: 100
      row: 2
      bay: 1
      lev: 1
    # 堆垛机出库站点
    crnOutStn[0]:
    # 穿梭车出库站点
    steOutStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 103
      row: 7
      bay: 1
      lev: 1
  # 堆垛机3
  crn[2]:
    id: 3
    ip: 10.10.10.16
    port: 8888
    # 偏移量，当堆垛机站点列号=1时，偏移量=2
    offset: 2
    demo: false
    # 堆垛机入库站点
    crnInStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 104
      row: 10
      bay: 1
      lev: 1
    # 堆垛机出库站点
    crnOutStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 105
      row: 11
      bay: 1
      lev: 1
  # 堆垛机4
  crn[3]:
    id: 4
    ip: 10.10.10.19
    port: 8888
    # 偏移量，当堆垛机站点列号=1时，偏移量=2
    offset: 2
    demo: false
    # 堆垛机入库站点
    crnInStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 106
      row: 14
      bay: 1
      lev: 1
    # 堆垛机出库站点
    crnOutStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 107
      row: 15
      bay: 1
      lev: 1
  # 堆垛机5
  crn[4]:
    id: 5
    ip: 10.10.10.22
    port: 8888
    # 偏移量，当堆垛机站点列号=1时，偏移量=2
    offset: 2
    demo: false
    # 堆垛机入库站点
    crnInStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 108
      row: 18
      bay: 1
      lev: 1
    # 堆垛机出库站点
    crnOutStn[0]:
      devpPlcId: ${wcs-slave.devp[0].id}
      staNo: 109
      row: 19
      staNo: 101
      row: 3
      bay: 1
      lev: 1
  # 输送线
@@ -194,10 +129,3 @@
    port: 5005
    devpPlcId: ${wcs-slave.devp[0].id}
    staArr: 173
  # LED2
  led[1]:
    id: 2
    ip: 10.10.10.61
    port: 5005
    devpPlcId: ${wcs-slave.devp[0].id}
    staArr: 182