#

lsh

2022-10-12 f6decf71aa936d019a7732970744c6c33f5e6175

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -103,7 +103,7 @@
        for (DevpSlave devp : slaveProperties.getDevp()) {
            // 遍历入库口
            for (DevpSlave.Sta inSta : devp.getInSta()) {
//                inSta.setStaNo(102);
                inSta.setStaNo(102);
                // 获取条码扫描仪信息
                BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
                if (barcodeThread == null) {
@@ -167,7 +167,7 @@
                    try {

                        LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
//                        locTypeDto.setLocType1((short)1);
                        locTypeDto.setLocType1((short)1);
                        SearchLocParam param = new SearchLocParam();
                        param.setBarcode(barcode);
                        param.setIoType(1);
@@ -2001,20 +2001,40 @@
                                break;
                            case 3://完成测试信号
                                olsStatus = 3;
                                newStatus = 5;
                                newStatus = 4;
                                newSingle = 0;//测试完成，寄存器地址清零，3===>>0
                                break;
                            case 5://暂停信号
                                olsStatus = 5;//plc给出暂停信号
                                newStatus = 6;//WCS收到暂停信号后，更新testMast
                                olsStatus = 99;//plc给出暂停信号
                                newStatus = 0;//WCS收到暂停信号后，更新testMast
                                newSingle = 6;//暂停测试，寄存器地址，5===>>6
                                break;
                            case 7://紧急出库确认充电线已经拔出
                                olsStatus = 99;//plc给出暂停信号
                                newStatus = 0;//WCS收到暂停信号后，更新testMast
                                newSingle = 6;//暂停测试，寄存器地址，7===>>6
                                break;
                            case 8://解除暂停
                                olsStatus = 99;
                                newStatus = 0;
                                newSingle = 0;//测试复核，寄存器地址，8===>>0
                                break;
                            case 11://入库前判断充电线是否放好
                                olsStatus = 99;
                                newStatus = 0;
                                newSingle = 11;//
                                break;
                            case 12://充电线放好
                                olsStatus = 99;
                                newStatus = 0;
                                newSingle = 0;//测试复核，寄存器地址，12===>>0
                                break;
                        }

                        TestMast testMast = testMastService.selectOne(new EntityWrapper<TestMast>()
                                .eq("channel",(i+1)).eq("status",olsStatus));//查找原来的状态
                        if(null != testMast &&
                                (devpThread.startSignal[i] == 1 || devpThread.startSignal[i] == 3 || devpThread.startSignal[i] == 5)){
                                (devpThread.startSignal[i] == 1 || devpThread.startSignal[i] == 3)){
                            testMast.setStatus(newStatus);
                            testMast.setModiTime(new Date());
                            if(!testMastService.update(testMast,new EntityWrapper<TestMast>()
@@ -2024,15 +2044,98 @@
                            //复位PLC信号，借用输送站点实体类
                            StaProtocol staProtocol = new StaProtocol();
                            staProtocol.setSiteId(i*2);//寄存器地址
                            staProtocol.setStaNo((short)newSingle);//修改PLC寄存器地址值,从1改为2
                            staProtocol.setStaNo(newSingle);//修改PLC寄存器地址值,1==>2或3==>0,5==>6
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(3, staProtocol));
                            if(!result){
                                throw new CoolException("更新测试信号失败===>>" + i);
                                log.error("更新测试信号失败===>>[channel:{},locNo:{},barcode:{}]", i+1, testMast.getLocNo(), testMast.getBarcode());
//                                throw new CoolException("更新测试信号失败===>>" + i);
                            } else {
                                devpThread.startSignal[i] = newSingle;
                            }
                        }

                        }else if (devpThread.startSignal[i] == 5){
                            SearchLocParam param = new SearchLocParam();
                            param.setBarcode(i+1+"");
                            String response = new HttpHandler.Builder()
                                    .setUri(wmsUrl)
                                    .setPath("/mobile/test/suspend/auth")
                                    .setJson(JSON.toJSONString(param))
                                    .build()
                                    .doPost();
                            JSONObject jsonObject = JSON.parseObject(response);
                            if (jsonObject.getInteger("code").equals(200)) {
                                //复位PLC信号，借用输送站点实体类
                                StaProtocol staProtocol = new StaProtocol();
                                staProtocol.setSiteId(i*2);//寄存器地址
                                staProtocol.setStaNo(newSingle);//修改PLC寄存器地址值,5==>6
                                boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(3, staProtocol));
                                if(!result){
                                    log.error("暂停测试失败===>>["+i+1+"]号通道");
//                                throw new CoolException("更新测试信号失败===>>" + i);
                                } else {
                                    devpThread.startSignal[i] = newSingle;
                                }
                            } else {
                                log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl+"/mobile/test/suspend/auth", JSON.toJSONString(param), response);
                            }
                        }else if (devpThread.startSignal[i] == 7){
                            LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
                                    .eq("channel",(i+1)));
                            if (locMast.getLocSts().equals("F")){
                                locMast.setPackStatus(7); //7.紧急出库
                                locMastService.update(locMast,new EntityWrapper<LocMast>()
                                        .eq("channel",(i+1)));
                            }
                            //复位PLC信号，借用输送站点实体类
                            StaProtocol staProtocol = new StaProtocol();
                            staProtocol.setSiteId(i*2);//寄存器地址
                            staProtocol.setStaNo(newSingle);//修改PLC寄存器地址值,7==>6
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(3, staProtocol));
                            if(!result){
                                log.error("更新库位紧急出库信号失败===>>[channel:{},locNo:{},barcode:{}]", i+1, locMast.getLocNo(), locMast.getBarcode());
//                                throw new CoolException("更新测试信号失败===>>" + i);
                            } else {
                                devpThread.startSignal[i] = newSingle;
                            }
                        }else if (devpThread.startSignal[i] == 8){
                            //复位PLC信号，借用输送站点实体类
                            StaProtocol staProtocol = new StaProtocol();
                            staProtocol.setSiteId(i*2);//寄存器地址
                            staProtocol.setStaNo(newSingle);//修改PLC寄存器地址值,8==>0
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(3, staProtocol));
                            if(!result){
//                                log.error("更新库位紧急出库信号失败===>>[channel:{},locNo:{},barcode:{}]", i+1, locMast.getLocNo(), locMast.getBarcode());
//                                throw new CoolException("更新测试信号失败===>>" + i);
                            } else {
                                devpThread.startSignal[i] = newSingle;
                            }
                        }else if (devpThread.startSignal[i] == 11){
                            LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
                                    .eq("channel",(i+1)));
                            if (locMast.getLocSts().equals("O")){
                                locMast.setLocSts("X");
                                locMastService.update(locMast,new EntityWrapper<LocMast>()
                                        .eq("channel",(i+1)));
                            }
                        }else if (devpThread.startSignal[i] == 12){
                            LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
                                    .eq("channel",(i+1)));
                            if (locMast.getLocSts().equals("X")){
                                locMast.setLocSts("O");
                                locMastService.update(locMast,new EntityWrapper<LocMast>()
                                        .eq("channel",(i+1)));
                            }
                            //复位PLC信号，借用输送站点实体类
                            StaProtocol staProtocol = new StaProtocol();
                            staProtocol.setSiteId(i*2);//寄存器地址
                            staProtocol.setStaNo(newSingle);//修改PLC寄存器地址值,12==>0
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(3, staProtocol));
                            if(!result){
//                                log.error("更新库位紧急出库信号失败===>>[channel:{},locNo:{},barcode:{}]", i+1, locMast.getLocNo(), locMast.getBarcode());
//                                throw new CoolException("更新测试信号失败===>>" + i);
                            } else {
                                devpThread.startSignal[i] = newSingle;
                            }
                        }else { }
                    }

                }