孚能

野心家

2023-06-13 eb5e61b0f85c78455caa4e0ba54245aff982ba3d

 src/main/java/com/zy/core/thread/SiemensCrnThread.java

@@ -38,6 +38,11 @@
    private CrnProtocol crnProtocol;
    private boolean resetFlag = false;

    /**
     * 堆垛机是否在回原点运动中标记
     */
    private boolean backHpFlag = false;

    public SiemensCrnThread(CrnSlave slave) {
        this.slave = slave;
    }
@@ -80,6 +85,14 @@
                        command.setDestinationPosZ((short)0);     // 目标库位层
                        write(command);
                        break;
                    case 4:
                        if(task.getData().equals("0")){
                            siemensNet.Write("DB100.276", (short)0);
                        }else {
                            siemensNet.Write("DB100.276", (short)1);
                        }

                        break;
                    default:
                        break;
                }
@@ -89,6 +102,32 @@
            }

        }
    }

    /**
     * 初始化堆垛机状态
     */
    private void initCrn() {
        if (null == crnProtocol) {
            crnProtocol = new CrnProtocol();
        }
        crnProtocol.setMode((short) -1);
//        crnProtocol.setTaskNo((short)0);
        crnProtocol.setStatus((short)-1);
        crnProtocol.setBay((short)0);
        crnProtocol.setLevel((short)0);
        crnProtocol.setForkPos((short) -1);
        crnProtocol.setLiftPos((short) -1);
        crnProtocol.setWalkPos((short)0);
        crnProtocol.setLoaded((short)0);
        crnProtocol.setAlarm((short)0);
        crnProtocol.setxSpeed((short) 0);
        crnProtocol.setySpeed((short) 0);
        crnProtocol.setzSpeed((short) 0);
        crnProtocol.setxDistance((short) 0);
        crnProtocol.setyDistance((short) 0);
        crnProtocol.setxDuration((short) 0);
        crnProtocol.setyDuration((short) 0);
    }

    @Override
@@ -105,8 +144,9 @@
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】堆垛机plc连接失败！！！ ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("堆垛机plc连接失败！！！ ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            initCrn();
        }
        siemensNet.ConnectClose();
//        siemensNet.ConnectClose();
        return result;
    }

@@ -114,203 +154,154 @@
     * 读取状态
     */
    private void readStatus(){
        OperateResultExOne<byte[]> result = siemensNet.Read("DB11.2", (short) 104);
        if (result.IsSuccess) {
            if (null == crnProtocol) {
                crnProtocol = new CrnProtocol();
            }
            crnProtocol.setMode(siemensNet.getByteTransform().TransInt16(result.Content, 0));   // 2
            crnProtocol.setStatus(siemensNet.getByteTransform().TransInt16(result.Content, 2)); // 4
            crnProtocol.setTaskNo(siemensNet.getByteTransform().TransInt16(result.Content, 4)); // 6
            crnProtocol.setTaskFinish(siemensNet.getByteTransform().TransInt16(result.Content, 6)); // 8
            crnProtocol.setValid(siemensNet.getByteTransform().TransInt16(result.Content, 8));  // 10
        try {
            OperateResultExOne<byte[]> result = siemensNet.Read("DB101.0", (short) 65);
            if (result.IsSuccess) {
                if (null == crnProtocol) {
                    crnProtocol = new CrnProtocol();
                }
                crnProtocol.setMode(siemensNet.getByteTransform().TransInt16(result.Content, 0));
                crnProtocol.setTaskNo(siemensNet.getByteTransform().TransInt16(result.Content, 2));
                crnProtocol.setStatus(siemensNet.getByteTransform().TransInt16(result.Content, 4));
                crnProtocol.setBay(siemensNet.getByteTransform().TransInt16(result.Content, 6));
                crnProtocol.setLevel(siemensNet.getByteTransform().TransInt16(result.Content, 8));
                crnProtocol.setForkPos(siemensNet.getByteTransform().TransInt16(result.Content, 10));
                crnProtocol.setLiftPos(siemensNet.getByteTransform().TransInt16(result.Content, 12));
                crnProtocol.setWalkPos(siemensNet.getByteTransform().TransInt16(result.Content, 14));
                crnProtocol.setLoaded(siemensNet.getByteTransform().TransInt16(result.Content, 16));
                crnProtocol.setAlarm(siemensNet.getByteTransform().TransInt16(result.Content, 18));
                crnProtocol.setTemp1(siemensNet.getByteTransform().TransInt16(result.Content, 20));
                crnProtocol.setTemp2(siemensNet.getByteTransform().TransInt16(result.Content, 22));
                crnProtocol.setTemp3(siemensNet.getByteTransform().TransInt16(result.Content, 24));
                crnProtocol.setTemp4(siemensNet.getByteTransform().TransInt16(result.Content, 26));
                crnProtocol.setxSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 28));
                crnProtocol.setySpeed(siemensNet.getByteTransform().TransInt16(result.Content, 32));
                crnProtocol.setzSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 36));
                crnProtocol.setxDistance(siemensNet.getByteTransform().TransInt16(result.Content, 40));
                crnProtocol.setyDistance(siemensNet.getByteTransform().TransInt16(result.Content, 44));
                crnProtocol.setxDuration(siemensNet.getByteTransform().TransInt16(result.Content, 48));
                crnProtocol.setyDuration(siemensNet.getByteTransform().TransInt16(result.Content, 52));
                crnProtocol.setBarcodeResult(siemensNet.getByteTransform().TransBool(result.Content, 56));
                crnProtocol.setBarcode(siemensNet.getByteTransform().TransString(result.Content, 58,6,"UTF-8"));

            crnProtocol.setLevel(siemensNet.getByteTransform().TransInt16(result.Content, 14)); // 16
            crnProtocol.setBay(siemensNet.getByteTransform().TransInt16(result.Content, 16));   // 18
            crnProtocol.setRow(siemensNet.getByteTransform().TransInt16(result.Content, 18));   // 20
            crnProtocol.setLane(siemensNet.getByteTransform().TransInt16(result.Content, 20));  // 22
                OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功",DateUtils.convert(new Date()), slave.getId()));

            crnProtocol.setAlarm1(siemensNet.getByteTransform().TransInt32(result.Content, 28));    // 30
            crnProtocol.setAlarm2(siemensNet.getByteTransform().TransInt32(result.Content, 32));    // 34
            crnProtocol.setAlarm3(siemensNet.getByteTransform().TransInt32(result.Content, 36));    // 38
            crnProtocol.setAlarm4(siemensNet.getByteTransform().TransInt32(result.Content, 40));    // 42

            boolean[] bool1 = siemensNet.getByteTransform().TransBool(result.Content, 60, 1);    // 62
            crnProtocol.setConnStatus(bool1[0]);
            crnProtocol.setCorrection(bool1[3]);
            crnProtocol.setTuError(bool1[4]);
            crnProtocol.setNoneError(bool1[5]);
            crnProtocol.setStockError(bool1[6]);
            crnProtocol.setJobInvalid(bool1[7]);
            boolean[] bool2 = siemensNet.getByteTransform().TransBool(result.Content, 61, 1);    // 63
            crnProtocol.setIdle(bool2[0]);
            crnProtocol.setControl(bool2[1]);
            crnProtocol.setStopQuasi(bool2[2]);
            crnProtocol.setRunning(bool2[3]);
            crnProtocol.setFault(bool2[4]);
            crnProtocol.setForkHome(bool2[5]);
            crnProtocol.setForkSingleLeft(bool2[6]);
            crnProtocol.setForkSingleRight(bool2[7]);
            boolean[] bool3 = siemensNet.getByteTransform().TransBool(result.Content, 62, 1);    // 64
            crnProtocol.setForkDoubleLeft(bool3[0]);
            crnProtocol.setForkDoubleRight(bool3[1]);
            crnProtocol.setSingleHigh(bool3[2]);
            crnProtocol.setSingleLow(bool3[3]);
            crnProtocol.setDoubleHigh(bool3[4]);
            crnProtocol.setDoubleLow(bool3[5]);
            crnProtocol.setPlatformHigh(bool3[6]);
            crnProtocol.setPlatformLow(bool3[7]);
            boolean[] bool4 = siemensNet.getByteTransform().TransBool(result.Content, 64, 1);    // 66
            crnProtocol.setLoaded((short) (bool4[4]?1:0));  // 有物

            // 速度
            crnProtocol.setXSpeed((float) siemensNet.getByteTransform().TransInt16(result.Content, 22));    // 24
            crnProtocol.setYSpeed((float) siemensNet.getByteTransform().TransInt16(result.Content, 24));    // 26
            crnProtocol.setZSpeed((float) siemensNet.getByteTransform().TransInt16(result.Content, 26));    // 28
            // 累计里程、时长
            crnProtocol.setXDistance((float) siemensNet.getByteTransform().TransInt32(result.Content, 88));    // 90
            crnProtocol.setYDistance((float) siemensNet.getByteTransform().TransInt32(result.Content, 92));    // 94
            crnProtocol.setXDuration((float) siemensNet.getByteTransform().TransInt32(result.Content, 96));    // 98
            crnProtocol.setYDuration((float) siemensNet.getByteTransform().TransInt32(result.Content, 100));    // 102

            // 增强
            if (crnProtocol.getForkHome()) {
                crnProtocol.setForkPos(CrnForkPosType.HOME);
            }
            if (crnProtocol.getForkSingleLeft()) {
                crnProtocol.setForkPos(CrnForkPosType.LEFT);
            }
            if (crnProtocol.getForkSingleRight()) {
                crnProtocol.setForkPos(CrnForkPosType.RIGHT);
            }
            if (crnProtocol.getForkDoubleLeft()) {
                crnProtocol.setForkPos(CrnForkPosType._LEFT);
            }
            if (crnProtocol.getForkDoubleRight()) {
                crnProtocol.setForkPos(CrnForkPosType._RIGHT);
            }
            if (crnProtocol.getSingleHigh()) {
                crnProtocol.setLiftPos(CrnLiftPosType.UP);
            }
            if (crnProtocol.getSingleLow()) {
                crnProtocol.setLiftPos(CrnLiftPosType.DOWN);
            }
            if (crnProtocol.getDoubleHigh()) {
                crnProtocol.setLiftPos(CrnLiftPosType._UP);
            }
            if (crnProtocol.getDoubleLow()) {
                crnProtocol.setLiftPos(CrnLiftPosType._DOWN);
            }
            if (crnProtocol.getIdle()) {
                crnProtocol.setStatus(CrnStatusType.IDLE);
            }

            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功",DateUtils.convert(new Date()), slave.getId()));

            // 复位信号
            if (crnProtocol.getTaskFinish() == 1) {
                if (resetFlag) {
                    CrnCommand crnCommand = new CrnCommand();
                    crnCommand.setAckFinish((short)1);
                    if (write(crnCommand)) {
                        resetFlag = false;
                // 复位信号
                if (crnProtocol.getStatusType().equals(CrnStatusType.WAITING)) {
                    if (resetFlag) {
                        if(crnProtocol.getTaskNo()==9999){
                            backHpFlag = false;
                        }
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setAckFinish((short)1);
                        if (write(crnCommand)) {
                            resetFlag = false;
                        }
                    }

                }

                try {
                    // 根据实时信息更新数据库
                    BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
                    BasCrnp basCrnp = new BasCrnp();
                    basCrnp.setCrnNo(slave.getId());
                    basCrnp.setCrnSts((int)crnProtocol.getMode());
                    if (!basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                        log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
                    }
                } catch (Exception ignore){}

            } else {
                initCrn();
                OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
                log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            }
        } catch (Exception e) {
            e.printStackTrace();
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            initCrn();
        }
    }

            try {
                // 根据实时信息更新数据库
                BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
                BasCrnp basCrnp = new BasCrnp();
                basCrnp.setCrnNo(slave.getId());
                if (!basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                    log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
                }
            } catch (Exception ignore){}

        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
    private void convertRow(CrnCommand crnCommand) {
        if (crnCommand.getSourcePosX() != null && crnCommand.getSourcePosX() != 0) {
            crnCommand.setSourcePosX((short) (crnCommand.getSourcePosX() - ((slave.getId() - 1) * 4)));
        }
        if (crnCommand.getDestinationPosX() != null && crnCommand.getDestinationPosX() != 0) {
            crnCommand.setDestinationPosX((short) (crnCommand.getDestinationPosX() - ((slave.getId() - 1) * 4)));
        }
    }

    /**
     * 写入数据
     */
    private boolean write(CrnCommand command){
    private boolean write(CrnCommand command) throws InterruptedException {
        if (null == command) {
            log.error("堆垛机写入命令为空");
            return false;
        }
        if (command.getTaskNo() == 0 && command.getAckFinish() == 0) {
            command.setTaskNo((short) 9999);
        }
        //convertRow(command);
        command.setCrnNo(slave.getId());
        short[] array = new short[9];
        if (command.getAckFinish() == 0) {
            array[0] = 5;
        } else {
            array[0] = 0;
        }
        array[1] = command.getSourcePosZ();
        array[2] = command.getSourcePosY();
        short[] array = new short[12];
        array[0] = command.getAckFinish();
        array[1] = command.getTaskNo();
        array[2] = command.getTaskMode();
        array[3] = command.getSourcePosX();
        array[4] = command.getDestinationPosZ();
        array[5] = command.getDestinationPosY();
        array[4] = command.getSourcePosY();
        array[5] = command.getSourcePosZ();
        array[6] = command.getDestinationPosX();
        array[7] = command.getSourceStaNo();
        array[8] = command.getDestinationStaNo();
        // 作业信息
        OperateResult result = siemensNet.Write("DB1000.0", array);
        // 任务号 + 完成位
        short[] array2 = new short[2];
        array2[0] = command.getTaskNo();
        array2[1] = command.getAckFinish();
        OperateResult result1 = siemensNet.Write("DB1000.24", array2);

        // 结束位
        array[7] = command.getDestinationPosY();
        array[8] = command.getDestinationPosZ();
        array[9] = command.getSourceStaNo();
        array[10] = command.getDestinationStaNo();
        array[11] = command.getCommand();
        OperateResult result = siemensNet.Write("DB100.0", array);
        if (command.getAckFinish() == 0){
            OperateResult result2 = siemensNet.Write("DB100.20", command.getBarcode());
        }
        if (command.getAckFinish() == 0) {
            OperateResult result2 = siemensNet.Write("DB1000.28.1", true);
            short commandFinish = 1;
            result = siemensNet.Write("DB100.18", commandFinish);
        }

        // 日志记录
        try {
            if (command.getAckFinish() != 1) {
                BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
                BasCrnOpt basCrnOpt = new BasCrnOpt(
                        command.getTaskNo().intValue(),    // 任务号
                        command.getCrnNo(),    // 堆垛机[非空]
                        new Date(),    // 下发时间
                        command.getTaskModeType().toString(),    // 模式
                        command.getSourcePosX().intValue(),    // 源排
                        command.getSourcePosY().intValue(),    // 源列
                        command.getSourcePosZ().intValue(),    // 源层
                        null,    // 源站
                        command.getDestinationPosX().intValue(),    // 目标排
                        command.getDestinationPosY().intValue(),    // 目标列
                        command.getDestinationPosZ().intValue(),    // 目标层
                        null,    // 目标站
                        null,    // 响应结果
                        null,    // 修改时间
                        null    // 修改人员
                );
                bean.insert(basCrnOpt);
            }
            // 日志记录
            BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
            BasCrnOpt basCrnOpt = new BasCrnOpt(
                    command.getTaskNo().intValue(),    // 任务号
                    command.getCrnNo(),    // 堆垛机[非空]
                    new Date(),    // 下发时间
                    command.getTaskModeType().toString(),    // 模式
                    command.getSourcePosX().intValue(),    // 源排
                    command.getSourcePosY().intValue(),    // 源列
                    command.getSourcePosZ().intValue(),    // 源层
                    null,    // 源站
                    command.getDestinationPosX().intValue(),    // 目标排
                    command.getDestinationPosY().intValue(),    // 目标列
                    command.getDestinationPosZ().intValue(),    // 目标层
                    null,    // 目标站
                    null,    // 响应结果
                    null,    // 修改时间
                    null    // 修改人员
            );
            bean.insert(basCrnOpt);
        } catch (Exception ignore) {}

        if (result.IsSuccess && result1.IsSuccess) {

        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }


    @Override
    public void close() {
        siemensNet.ConnectClose();