zy-wcs.git - Gitblit

			@@ -5,12 +5,8 @@
			import com.baomidou.mybatisplus.mapper.EntityWrapper;
			import com.baomidou.mybatisplus.mapper.Wrapper;
			import com.core.common.Cools;
			import com.core.common.DateUtils;
			import com.core.exception.CoolException;
			import com.zy.common.model.LocTypeDto;
			import com.zy.common.model.MatDto;
			import com.zy.common.model.SearchLocParam;
			import com.zy.common.model.StartupDto;
			import com.zy.common.model.*;
			import com.zy.common.service.CommonService;
			import com.zy.core.CrnThread;
			import com.zy.core.DevpThread;
			@@ -23,14 +19,11 @@
			import com.zy.core.model.Task;
			import com.zy.core.model.command.CrnCommand;
			import com.zy.core.model.command.LedCommand;
			import com.zy.core.model.command.RgvCommand;
			import com.zy.core.model.protocol.CrnProtocol;
			import com.zy.core.model.protocol.RgvProtocol;
			import com.zy.core.model.protocol.StaProtocol;
			import com.zy.core.properties.SlaveProperties;
			import com.zy.core.thread.BarcodeThread;
			import com.zy.core.thread.LedThread;
			import com.zy.core.thread.RgvThread;
			import com.zy.core.thread.SiemensDevpThread;
			import com.zy.entity.*;
			import com.zy.mapper.*;
			@@ -56,6 +49,43 @@
			public class MainServiceImpl {

			public static final long COMMAND_TIMEOUT = 5 * 1000;

			// 空拖出库站点，区分子母空托盘
			public static final Map<Integer,String> emptyPalletSiteMap = new HashMap<>();

			// 母托盘叠盘站点
			public static final List<Integer> stackingSite = new ArrayList<>();

			// rgv接驳站点
			public static final List<Integer> rgvConnectionSiteList = new ArrayList<>();

			// 工作档对应目标站点转换为rgv目标站点
			public static final Map<Integer,Integer> taskStaNoToRgvStaNoMap = new HashMap<>();

			// 罐装完成rgv接驳站点
			public static final List<Integer> canningLineRgvConnectionSiteList = new ArrayList<>();

			static {
			emptyPalletSiteMap.put(1002,"M");
			emptyPalletSiteMap.put(1020,"M");emptyPalletSiteMap.put(1035,"Z");

			stackingSite.add(1027);stackingSite.add(1020);

			rgvConnectionSiteList.add(1012);rgvConnectionSiteList.add(1006);rgvConnectionSiteList.add(1001);rgvConnectionSiteList.add(1018);
			rgvConnectionSiteList.add(1019);rgvConnectionSiteList.add(1041);rgvConnectionSiteList.add(1034);rgvConnectionSiteList.add(1033);
			rgvConnectionSiteList.add(1026);rgvConnectionSiteList.add(1022);rgvConnectionSiteList.add(1044);
			rgvConnectionSiteList.add(1083);rgvConnectionSiteList.add(1086);rgvConnectionSiteList.add(1089);rgvConnectionSiteList.add(1090);
			rgvConnectionSiteList.add(1105);rgvConnectionSiteList.add(1100);rgvConnectionSiteList.add(1097);rgvConnectionSiteList.add(1094);
			rgvConnectionSiteList.add(1091);

			taskStaNoToRgvStaNoMap.put(1050,1044);taskStaNoToRgvStaNoMap.put(1079,1044);taskStaNoToRgvStaNoMap.put(1065,1044);taskStaNoToRgvStaNoMap.put(1072,1044);taskStaNoToRgvStaNoMap.put(1093,1094);
			taskStaNoToRgvStaNoMap.put(1104,1100);taskStaNoToRgvStaNoMap.put(1102,1100);taskStaNoToRgvStaNoMap.put(1090,1090);taskStaNoToRgvStaNoMap.put(1002,1001);taskStaNoToRgvStaNoMap.put(1016,1018);
			taskStaNoToRgvStaNoMap.put(1020,1019);taskStaNoToRgvStaNoMap.put(1024,1022);taskStaNoToRgvStaNoMap.put(1035,1034);taskStaNoToRgvStaNoMap.put(1040,1033);taskStaNoToRgvStaNoMap.put(1043,1041);

			canningLineRgvConnectionSiteList.add(1083);canningLineRgvConnectionSiteList.add(1086);
			canningLineRgvConnectionSiteList.add(1089);

			}

			@Autowired
			private CommonService commonService;
			@@ -125,14 +155,7 @@
			// 尺寸检测异常
			boolean back = false;
			String errMsg = "";
			// if ((staProtocol.getSiteId() == 101 && devpThread.ioModeOf101 == IoModeType.PAKOUT_MODE)
			// \|\|(staProtocol.getSiteId() == 103 && devpThread.ioModeOf103 == IoModeType.PAKOUT_MODE)
			// \|\|(staProtocol.getSiteId() == 305 && devpThread.ioModeOf305 == IoModeType.PAKOUT_MODE)) {
			// errMsg = "当前为出库模式";
			// back = true;
			// }
			// if (!back && staProtocol.isFrontErr()) {
			if (staProtocol.isFrontErr()) {
			if (staProtocol.isFrontErr()) {
			errMsg = "前超限";
			back = true;
			}
			@@ -162,7 +185,6 @@
			}
			// 退回
			if (back) {
			// News.warn("扫码入库失败，{}入库站因{}异常，托盘已被退回", inSta.getStaNo(), errMsg);
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errMsg));

			if (!staProtocol.isLoading()){
			@@ -198,15 +220,15 @@
			continue;
			}
			// 判断重复工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			// if (wrkMast != null) {
			WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			if (wrkMast != null) {
			// News.error(methodName + ":工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast.getWrkNo());
			// if (ledThread != null) {
			// News.error(methodName + ":扫码失败，请重试");
			// MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, "工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={" + wrkMast.getWrkNo() + "}, 请手动取消已存在工作档"));
			// }
			// continue;
			// }
			continue;
			}
			WrkMast checkPick = wrkMastService.selectOne(new EntityWrapper<WrkMast>()
			.eq("barcode", barcode)
			.in("io_type", 107,103,57));
			@@ -221,17 +243,28 @@
			param.setIoType(1);
			param.setSourceStaNo(inSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			param.setLocArea(2);// 入空桶库标识
			param.setBucketType(staProtocol.getBucketType());
			param.setBucketCount(staProtocol.getBucketCount());
			param.setTailSupportFlag(staProtocol.isTailSupportFlag());
			param.setWantBucketFlag(devpThread.getWantBucketFlag());

			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			log.info("入库请求wms原始返回：" + response);
			JSONObject jsonObject = JSON.parseObject(response);
			log.info("组托wms返回：" + jsonObject);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			barcodeThread.setBarcode("");
			// 目标站点是直供罐装线
			if (dto.getStaNo() == 1079 \|\| dto.getStaNo() == 1065 \|\| dto.getStaNo() == 1072) {
			devpThread.getWantBucketFlag().remove(dto.getCrnNo()); // 移除输送线要桶信号
			staProtocol.setClearBucketSignal(dto.getCrnNo()); // 清除要桶信号标识
			}
			staProtocol.setWorkNo(dto.getWorkNo());
			staProtocol.setStaNo(RouteUtils.SouStaEnd(dto.getStaNo(),dto.getSourceStaNo()));
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			@@ -249,28 +282,21 @@
			staProtocol.setStaNo(inSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			//
			// if (ledThread != null) {
			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			}
			// }
			// News.error(methodName + ":请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}
			News.error(methodName + ":请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}


			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			}


			}
			}
			// News.infoNoLog(""+mark+" - 0"+" - 组托 ===》执行完成");

			}

			@@ -481,166 +507,6 @@
			// News.infoNoLog(""+mark+" - 0"+" - 拣料、并板、盘点再入库 ===》执行完成");
			}


			//盘点再入库
			public synchronized void stnToCrnStnPick2(){
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历拣料入库口
			for (DevpSlave.Sta pickSta : devp.getPickSta()) {
			// 获取拣料入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(pickSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk()
			// && staProtocol.getWorkNo() > 0
			&& staProtocol.isPakMk()){

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {
			// log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode)) {
			staProtocol.setWorkNo(wrkNo);
			staProtocol.setStaNo(pickSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

			// led 异常显示
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, pickSta.getLed(), new Task(3, errorMsg));
			}
			continue;
			}
			} else {
			staProtocol.setWorkNo(wrkNo);
			staProtocol.setStaNo(pickSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

			// led 异常显示
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, pickSta.getLed(), new Task(3, errorMsg));
			}
			continue;
			}

			WrkMast wrkMast = wrkMastMapper.selectPickStep2(barcode);
			if (wrkMast == null) {
			// 无盘点数据
			continue;
			}

			// 出库确认信号位
			// if ((Cools.isEmpty(wrkMast.getInvWh()) \|\| wrkMast.getInvWh().equals("N")) && wrkMast.getIoType() != 107) {
			// continue;
			// }
			// if ( wrkMast.getIoType() != 107 \|\| Cools.isEmpty(wrkMast.getStaNo())
			// \|\| Cools.isEmpty(wrkMast.getSourceStaNo())) {
			// continue;
			// }

			// 获取库位号
			try {
			LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>().eq("loc_no", wrkMast.getSourceLocNo()));
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			SearchLocParam param = new SearchLocParam();
			param.setBarcode(barcode);
			param.setIoType(107);
			param.setSourceStaNo(pickSta.getStaNo()); //作业站点
			if (!Cools.isEmpty(locMast)){
			param.setLocType1(locMast.getLocType1());
			}else {
			param.setLocType1(locTypeDto.getLocType1());
			}

			String response = "";
			log.info("入库作业站"+pickSta.getStaNo()+"盘点再入库任务请求WMS===>>参数：" + param);
			try {
			response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin2/loc/v1")
			.setJson(JSON.toJSONString(param))
			// .setTimeout(15, TimeUnit.SECONDS)
			.build()
			.doPost();
			} catch(Exception e){
			log.error("入库作业站"+pickSta.getStaNo()+"盘点再入库任务请求WMS===>>参数：" + param);
			log.error("stnToCrnStnPick2===>>盘点查库位入库接口失败", e);
			e.printStackTrace();
			continue;
			}
			log.info("入库作业站"+pickSta.getStaNo()+"盘点再入库任务请求WMS===>>参数：" + param);
			log.info("入库作业站"+pickSta.getStaNo()+"下发盘点再入库任务请求WMS返回结果===>>" + response);
			if(response.equals("")) {
			continue;
			}
			JSONObject jsonObject = JSON.parseObject(response);
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());
			Integer code = jsonObject.getInteger("code");
			if (code == 200) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			if (Cools.isEmpty(dto) \|\| Cools.isEmpty(dto.getStaNo())) {
			log.error("任务号"+wrkMast.getWrkNo()+"盘点再入库查询库位失败===>>" + jsonObject.toJSONString());
			} else {
			log.info("任务号"+wrkMast.getWrkNo()+"盘点再入库查询库位成功===>>" + jsonObject.toJSONString());
			try {
			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(wrkMast.getWrkNo());
			staProtocol.setStaNo((short)161);
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			ledThread.errorReset();
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}
			log.info("任务号"+wrkMast.getWrkNo()+"盘点再入库任务下发成功===>>" + staProtocol);
			} catch (Exception e) {
			log.error("盘点再入库失败===>>" + e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			} else {
			staProtocol.setWorkNo(wrkNo);
			staProtocol.setStaNo(pickSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, pickSta.getLed(), new Task(3, errorMsg));
			}
			}
			log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin2/loc/v1", JSON.toJSONString(param), response);
			}
			} catch (Exception e) {
			log.error("stnToCrnStnPick2===>>fail", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			}

			}

			}
			}

			/**
			* 堆垛机站出库到出库站
			*/
			@@ -678,42 +544,36 @@
			if (crnProtocol.modeType == CrnModeType.AUTO && crnProtocol.getTaskNo().equals(wrkMast.getWrkNo().shortValue())
			&& crnProtocol.statusType == CrnStatusType.WAITING
			&& crnProtocol.forkPosType == CrnForkPosType.HOME) {
			News.error("堆垛机出库完成 - 开始执行");

			// 命令下发区 --------------------------------------------------------------------------

			// 更新工作档状态为14失败

			// 下发站点信息

			if (wrkMast.getSourceStaNo() == 106 && wrkMast.getWrkSts() == 12L) {
			wrkMast.setWrkSts(16L);
			wrkMast.setCrnNo(1);
			if (wrkMast.getStaNo() == 107) {
			wrkMast.setSourceStaNo(107);
			} else if(wrkMast.getStaNo()==104) {
			wrkMast.setSourceStaNo(105);
			}
			staProtocol.setStaNo((short) 106);

			log.info("----------106移库标识---------");
			}else if(wrkMast.getSourceStaNo() == 105 && wrkMast.getWrkSts() == 16L) {
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			log.info("106移库完成，输送线发送105到104，源站为：" + staProtocol.getSiteId());
			wrkMast.setWrkSts(14L);
			}else {
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			wrkMast.setWrkSts(14L);
			}

			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			staProtocol.setWorkNo(wrkMast.getWrkNo());
			if (!MessageQueue.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol))) {
			continue;
			}
			wrkMast.setWrkSts(14L);
			wrkMast.setCrnEndTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) != 0) {
			// 空桶出库完成库位组任务
			if (wrkMast.getSourceStaNo() == 1056) {
			WrkMast wrkMast1 = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("source_sta_no", 1056).eq("wrk_sts", 12));
			if (wrkMast1 != null) {
			StaProtocol staProtocol1 = devpThread.getStation().get(1057);
			if (staProtocol1 != null) {
			staProtocol1 = staProtocol1.clone();
			staProtocol1.setStaNo(wrkMast1.getStaNo().shortValue());
			staProtocol1.setWorkNo(wrkMast1.getWrkNo());
			if (!MessageQueue.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol1))) {
			log.error("空桶出库完成库位组任务推送输送线命令队列失败");
			}
			wrkMast1.setWrkSts(14L);
			wrkMast1.setCrnEndTime(new Date());
			if (wrkMastMapper.updateById(wrkMast1) != 0) {
			}
			}
			}
			}
			// 复位堆垛机
			News.error("出库任务完成下发堆垛机复位", wrkMast.getWrkNo());
			log.info("出库任务完成下发堆垛机复位,任务号：{}",wrkMast.getWrkNo());
			crnThread.setResetFlag(true);
			} else {
			News.error(""+mark+" - 1"+" - 更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			@@ -734,6 +594,142 @@
			}

			/**
			* 空子托盘入库
			*/
			public synchronized void storeEmptyPlt() {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getEmptyInSta()) {
			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			// 尺寸检测异常
			boolean back = false;
			String errMsg = "";
			if (staProtocol.isFrontErr()) {
			errMsg = "前超限";
			back = true;
			}
			if (!back && staProtocol.isBackErr()) {
			errMsg = "后超限";
			back = true;
			}
			if (!back && staProtocol.isHighErr()) {
			errMsg = "高超限";
			back = true;
			}
			if (!back && staProtocol.isLeftErr()) {
			errMsg = "左超限";
			back = true;
			}
			if (!back && staProtocol.isRightErr()) {
			errMsg = "右超限";
			back = true;
			}
			if (!back && staProtocol.isWeightErr()) {
			errMsg = "超重";
			back = true;
			}
			if (!back && staProtocol.isBarcodeErr()) {
			errMsg = "扫码失败";
			back = true;
			}
			// 退回
			if (back) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errMsg));
			if (!staProtocol.isLoading()) {
			continue;
			}
			if (!staProtocol.isPakMk()) {
			continue;
			}
			staProtocol.setWorkNo(wrkNo);
			News.info("{}空托入库回退：{}，任务号：{}", inSta.getStaNo(), errMsg, wrkNo);
			staProtocol.setStaNo(inSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			log.error("输送线下发1：" + wrkNo + "," + inSta.getBackSta());
			return;
			}

			// 判断是否满足入库条件
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& staProtocol.isEmptyMk()
			&& staProtocol.isPakMk()) {
			if (Cools.isEmpty(barcode) \|\| "NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "00000000".equals(barcode)) {
			News.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			continue;
			}
			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			if (wrkMast != null) {
			continue;
			}
			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

			SearchLocParam param = new SearchLocParam();
			param.setBarcode(barcode);
			param.setIoType(10);
			param.setSourceStaNo(inSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			log.info("空子托盘入库请求wms原始返回：" + response);
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			barcodeThread.setBarcode("");
			staProtocol.setWorkNo(dto.getWorkNo());
			staProtocol.setStaNo(RouteUtils.SouStaEnd(dto.getStaNo(), dto.getSourceStaNo()));
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			log.error("输送线下发2：" + dto.getWorkNo() + "," + dto.getStaNo());
			if (!result) {
			News.error(":更新plc站点信息失败");
			throw new CoolException("更新plc站点信息失败");
			} else {
			ledThread.errorReset();
			}
			} else {
			staProtocol.setWorkNo(wrkNo);
			staProtocol.setStaNo(inSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			}
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			}
			}
			}

			/**
			* 入出库 ===>> 堆垛机入出库作业下发
			*/
			public synchronized void crnIoExecute(Integer mark) {
			@@ -750,11 +746,6 @@
			News.error(""+mark+" - 1"+" - {}号堆垛机尚未在数据库进行维护！", crn.getId());
			continue;
			}

			// //堆垛机回原点任务中
			// if(crnThread.isBackHpFlag()){
			// continue;
			// }

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO
			@@ -784,68 +775,8 @@
			}
			}
			// 库位移转
			//mark - 3 - ....
			this.locToLoc(crn, crnProtocol,mark);
			// this.crnRebackHp(crnProtocol, crnThread);

			}
			// News.infoNoLog(""+mark+" - 0"+" - 堆垛机入出库作业下发执行完成");
			}

			/**
			* 回原点，堆垛机没有执行中任务，设备存在入库任务时叫回原点
			*/
			public synchronized void crnRebackHp(CrnProtocol crnProtocol, CrnThread crnThread) {
			// for (CrnSlave crn : slaveProperties.getCrn()) {
			// // 获取堆垛机信息
			// CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			// CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			// if (crnProtocol == null) {
			// continue;
			// }
			// BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			// if (basCrnp == null) {
			// log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			// continue;
			// }
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if (crnProtocol.getBay() == 1 && crnProtocol.getLevel() == 1) {
			return;
			}

			// 已经存在吊车执行任务时，则过滤3,12
			if (wrkMastMapper.selectWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//堆垛机有执行中任务，过滤3,4,11,12
			if (wrkMastMapper.selectCrnWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//输送线没有入库任务，过滤2
			if (wrkMastMapper.selectDevWorking(crnProtocol.getCrnNo()) == null) {
			return;
			}
			News.info("堆垛机召回原点==>>" + crnProtocol.getCrnNo() + "号堆垛机有入库任务,召回原点");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式: 回原点
			crnCommand.setSourcePosX((short) 0); // 源库位排
			crnCommand.setSourcePosY((short) 0); // 源库位列
			crnCommand.setSourcePosZ((short) 0); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			News.error("堆垛机回原点命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			crnThread.setBackHpFlag(true);
			}
			// }
			}

			/**
			@@ -973,18 +904,6 @@
			News.error(""+mark+" - 1"+" - 16"+" - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {

			// long startTime = System.currentTimeMillis();
			// while ((System.currentTimeMillis() - startTime) < COMMAND_TIMEOUT) {
			//
			// if (true) {
			// break;
			// }
			//
			// try{
			// Thread.sleep(500);
			// }catch(Exception ignore){}
			// }

			// 修改工作档状态 2.设备上走 => 3.吊车入库中
			Date now = new Date();
			wrkMast.setWrkSts(3L);
			@@ -992,6 +911,21 @@
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 1"+" - 17"+" - 修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			// 如果是1049则有两个任务，需要把1050改成吊车入库中
			if (crnStn.getStaNo() == 1049) {
			BasDevp basDevp = basDevpService.selectById(1050);
			if (basDevp.getWrkNo() == 0) {
			log.error("取货点为1049，但是1050任务号为0");
			} else {
			WrkMast wrkMast1 = wrkMastMapper.selectById(basDevp.getWrkNo());
			wrkMast1.setWrkSts(3L);
			wrkMast1.setCrnStrTime(now);
			wrkMast1.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast1) == 0) {
			News.error(""+mark+" - 1"+" - 17"+" - 修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}
			}
			}
			}
			@@ -1006,9 +940,7 @@
			News.warnNoLog(""+mark+" - 2"+" - 0"+" - 堆垛机入出库作业下发：执行出库");
			for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// 获取工作状态为11（生成出库ID）的出库工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			List<WrkMast> wrkMasts = wrkMastMapper.selectPakOutStep11(slave.getId(), crnStn.getStaNo());
			// todo 限制出库到305的工作档，如果配置outModel不等于Y，则跳过
			for (WrkMast wrkMast : wrkMasts) {
			if (wrkMast == null) {
			continue;
			@@ -1030,41 +962,22 @@
			if (staProtocol == null) {
			News.infoNoLog(""+mark+" - 2"+" - 3"+" - 堆垛机出库站信息(staProtocol!=null继续执行,否则循环终止)：staProtocol="+staProtocol);
			break;
			// continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
			// if (wrkMast.getStaNo() == 204 && devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
			// News.infoNoLog(""+mark+" - 2"+" - 4"+" - 入出库模式（此处出库方法，出库模式继续=="+devpThread.ioModeOf2F);
			// continue;
			// }
			// 入出库模式判断
			// if ((staProtocol.getSiteId() == 101 && devpThread.ioModeOf101 != IoModeType.PAKOUT_MODE)
			// \|\| (staProtocol.getSiteId() == 103 && devpThread.ioModeOf103 != IoModeType.PAKOUT_MODE)
			// \|\| (staProtocol.getSiteId() == 305 && devpThread.ioModeOf305 != IoModeType.PAKOUT_MODE)) {
			// continue;
			// }

			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			News.error(""+mark+" - 2"+" - 5"+" - 出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			break;
			// continue;
			}
			// 107无物才能出，其他有转运架才能出
			boolean loading = (staProtocol.getSiteId() == 107) != staProtocol.isLoading();

			// 判断堆垛机出库站状态
			if (staProtocol.isAutoing() && loading && staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")
			&& staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// 命令下发区 --------------------------------------------------------------------------
			log.warn("堆垛机出库命令下发："+staProtocol.getWorkNo()+","+staProtocol.isOutEnable()+","+staProtocol.getSiteId());
			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			// continue;
			break;
			}

			@@ -1106,7 +1019,7 @@
			moveLocForDeepLoc(slave, shallowLoc,mark);
			}
			News.error("{}任务出库失败，浅库位堵塞！浅库位号:{}", wrkMast.getWrkNo(), shallowLocNo);
			continue;
			break;
			} else if (shallowLoc.getLocSts().equals("Q") \|\| shallowLoc.getLocSts().equals("S")) {
			News.warnNoLog(""+mark+" - 2"+" - 10"+" - // Q、S 库位状态={}",shallowLoc.getLocSts());
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			@@ -1120,11 +1033,39 @@
			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			break;
			// return;
			}
			// if(crnStn.getStaNo() == 105) {
			// continue;
			// }

			WrkMast wrkMast1 = null; // 库位任务对应另一个库位任务
			LocMast locMast = null; // 库位对应另一个库位
			// 空桶库出库需要两个库位一起出
			if(slave.getId() == 4) {
			Integer row = sourceSta.getRow1();
			// 获取对应库位
			String newLocNo = (row == 9 \|\| row == 11 ? String.valueOf(row + 1) : row == 10 ? "09" : "11") + sourceSta.getLocNo().substring(2);
			locMast = locMastService.selectById(newLocNo);
			if (locMast == null) {
			log.error("空桶出库寻找{}对应库位组库位号{}错误",sourceSta.getLocNo(),newLocNo);
			break;
			}
			if (locMast.getLocSts().equals("R")) {
			wrkMast1 = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("source_loc_no", newLocNo));
			} else if(locMast.getLocSts().equals("F")) {
			log.error("空桶出库寻找{}对应库位组库位号{}库位状态错误F",sourceSta.getLocNo(),newLocNo);
			break;
			}
			}
			if (wrkMast1 != null) {
			// 判断给堆垛机发生命令的源库位
			if (sourceSta.getRow1() == 10 \|\| sourceSta.getRow1() == 11) {
			// 交换库位和任务
			LocMast t1 = sourceSta;
			sourceSta = locMast;
			locMast = t1;
			WrkMast t2 = wrkMast1;
			wrkMast1 = wrkMast;
			wrkMast = t2;
			}
			}

			News.warnNoLog(""+mark+" - 2"+" - 12"+" - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}",wrkMast.getWrkNo().shortValue()
			,sourceSta.getRow1().shortValue(),sourceSta.getBay1().shortValue(),sourceSta.getLev1().shortValue()
			@@ -1154,6 +1095,15 @@
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 2"+" - 14"+" - 修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			// 修改空桶库对应库位任务状态
			if (wrkMast1 != null) {
			wrkMast1.setWrkSts(12L);
			wrkMast1.setCrnStrTime(now);
			wrkMast1.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast1) == 0) {
			News.error(""+mark+" - 2"+" - 14"+" - 修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}
			break;
			}
			}
			@@ -1161,123 +1111,6 @@
			}
			News.infoNoLog(""+mark+" - 2"+" - 0"+" - 堆垛机入出库作业下发：出库执行完毕");
			}

			// /**
			// * 出库 ===>> 库位到堆垛机站
			// */
			// public void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
			// for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// // 获取工作状态为11（生成出库ID）的出库工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			// if (wrkMast == null) {
			// continue;
			// }
			// // 工作档状态判断
			// if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null){
			// log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			// continue;
			// }
			// // 获取源库位信息
			// LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			// if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
			// log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			// continue;
			// }
			// // 获取堆垛机出库站信息
			// SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			// StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			// if (staProtocol == null) {
			// continue;
			// } else {
			// staProtocol = staProtocol.clone();
			// }
			//
			//// // 入出库模式判断
			//// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
			//
			//
			// // 查询站点详细信息
			// BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			// if (staDetl == null) {
			// log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			// continue;
			// }
			// // 判断堆垛机出库站状态
			// if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
			// && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// // 命令下发区 --------------------------------------------------------------------------
			//
			// // 堆垛机控制过滤
			// if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			// continue;
			// }
			//
			// // 双深库位且浅库位有货，则需先对浅库位进行库位移转
			// if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			// String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			// LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			// if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			// WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			// if (null == waitWrkMast) {
			// log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			// } else {
			// if(waitWrkMast.getWrkSts() == 11) {
			// waitWrkMast.setIoPri(15D);
			// waitWrkMast.setModiTime(new Date());
			// if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			// log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			// }
			// continue;
			// } else {
			//
			// }
			// }
			// } else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// // 此标记避免多次执行移库任务
			// if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())) {
			// wrkMast.setUpdMk("Y");
			// wrkMastMapper.updateById(wrkMast);
			// // 生成工作档、改变浅库位的源库/目标库库位状态、下发堆垛机命令（立马执行)
			// moveLocForDeepLoc(slave, shallowLoc);
			// }
			// log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
			// continue;
			// }
			// }
			//
			// // 已经存在吊车执行任务时，则过滤
			// if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			// return;
			// }
			//
			// // 1.堆垛机开始移动
			// CrnCommand crnCommand = new CrnCommand();
			// crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			// crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			// crnCommand.setAckFinish((short) 0); // 任务完成确认位
			// crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			// crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			// crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			// crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			// crnCommand.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			// crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			// crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			// if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			// log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			// } else {
			// // 修改工作档状态 11.生成出库ID => 12.吊车出库中
			// Date now = new Date();
			// wrkMast.setWrkSts(12L);
			// wrkMast.setCrnStrTime(now);
			// wrkMast.setModiTime(now);
			// if (wrkMastMapper.updateById(wrkMast) == 0) {
			// log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			// }
			// }
			// }
			// }
			// }

			/**
			* 库位移转
			@@ -1527,120 +1360,6 @@
			// News.infoNoLog(""+mark+" - 0"+" - 堆垛机异常信息记录执行完成");
			}


			// -------------------------------------------------------------------------------

			/**
			* 空栈板初始化入库,叉车入库站放货
			*/
			public synchronized void storeEmptyPlt(Integer mark) {

			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历空板入库口
			for (DevpSlave.Sta emptyInSta : devp.getEmptyInSta()) {
			// 获取空板入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(emptyInSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			LedThread ledThread = null;
			if (!Cools.isEmpty(emptyInSta.getLed())) {
			ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, emptyInSta.getLed());
			}

			if (!staProtocol.isLoading()){
			continue;
			}

			// 站点条件判断
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& staProtocol.isEmptyMk()
			&& staProtocol.isPakMk()
			&& (staProtocol.getWorkNo() !=0 && staProtocol.getWorkNo() > 9700)
			) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行：空栈板初始化入库,叉车入库站放货");

			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

			SearchLocParam param = new SearchLocParam();
			param.setIoType(10);
			param.setSourceStaNo(emptyInSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);

			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(dto.getWorkNo());
			staProtocol.setStaNo(staProtocol.getSiteId().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			log.error("输送线下发6："+dto.getWorkNo()+","+staProtocol.getSiteId());
			if (!result) {
			News.errorNoLog(""+mark+" - 1"+" - 更新plc站点信息失败");
			throw new CoolException("更新plc站点信息失败");
			}

			if (ledThread != null) {
			// 命令集合
			List<LedCommand> commands = new ArrayList<>();
			// 组装命令
			LedCommand ledCommand = new LedCommand();
			ledCommand.setWorkNo(dto.getWorkNo());
			ledCommand.setIoType(1);
			ledCommand.setTitle("全板入库");
			ledCommand.setLocNo(dto.getLocNo());
			ledCommand.setStaNo(dto.getStaNo());
			commands.add(ledCommand);
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(1, commands));
			// ledThread.errorReset();
			}
			} else {
			// staProtocol.setWorkNo(wrkNo++);
			// staProtocol.setStaNo(emptyInSta.getBackSta().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// if (!result) {
			// News.errorNoLog(""+mark+" - 2"+" - 更新plc站点信息失败");
			// throw new CoolException("更新plc站点信息失败");
			// }
			//
			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(3, errorMsg));
			}
			}
			// News.error(""+mark+" - 3"+" - 请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			} else {
			News.errorNoLog(""+mark+" - 4"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isAutoing()+"、可入信号：" + staProtocol.isInEnable()
			+"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
			+"、锁定标记"+ staProtocol.isPakMk());
			}
			}
			}
			// News.infoNoLog(""+mark+" - 0"+" - 空栈板初始化入库,叉车入库站放货执行完成");
			}

			/**
			* 出库 ===>> 工作档信息写入led显示器
			*/
			@@ -1795,82 +1514,6 @@
			}

			/**
			* 因双深库位阻塞，对浅库位进行移转（入库版)
			* tip：同步
			*/
			@Transactional
			public synchronized void moveLocForDeepLocPakin(CrnSlave crn, LocMast shallowLoc, WrkMast pakinWrkMast) {
			LocMast loc = locMastService.selectById(pakinWrkMast.getLocNo());

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			Date now = new Date();
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(now);
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(15D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setCtnNo("Y"); // 入库阻塞库位移转标记
			wrkMast.setAppeTime(now);
			wrkMast.setModiTime(now);
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(now);
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(now);
			wrkDetl.setModiTime(now);
			if (!wrkDetlService.insert(wrkDetl)) {
			throw new CoolException("保存工作档明细失败");
			}
			}
			}
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("S"); // S.入库预约，入库阻塞库位移转
			shallowLoc.setModiTime(now);
			if (!locMastService.updateById(shallowLoc)) {
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			}
			// // 修改目标库位状态
			// if (loc.getLocSts().equals("O")) {
			// loc.setLocSts("S"); // S.入库预约
			// loc.setModiTime(new Date());
			// if (!locMastService.updateById(loc)) {
			// throw new CoolException("更新目标库位状态失败");
			// }
			// } else {
			// throw new CoolException("移转失败");
			// }
			wrkMast.setLocNo(shallowLoc.getLocNo());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("修改阻塞入库任务失败");
			}
			}

			/**
			* 因双深库位阻塞，对浅库位进行移转（立即执行版)
			* tip：同步
			*/
			@@ -1882,7 +1525,7 @@
			LocMast loc = null;
			for (Integer row : rows) {
			if (Utils.isDeepLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType2());

			if (loc != null) {
			if (Utils.isDeepLoc(slaveProperties, loc.getLocNo())) {
			@@ -1901,7 +1544,7 @@
			if (null == loc) {
			for (Integer row : rows) {
			if (Utils.isShallowLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType2());

			if (null != loc) {//对应深库位非在库状态,不能移库
			String deepLoc = Utils.getDeepLoc(slaveProperties, loc.getLocNo());
			@@ -1920,308 +1563,81 @@

			if (null == loc) {
			News.error(""+mark+"moveLocForDeepLoc"+" - 1"+" - 双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			throw new CoolException("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			}
			// throw new CoolException("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			} else {

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 2"+" - 保存工作档失败");
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			if (!wrkDetlService.insert(wrkDetl)) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 3"+" - 保存工作档明细失败");
			throw new CoolException("保存工作档明细失败");
			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getLocSts().equals("F") ? "Y" : "N"); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 2" + " - 保存工作档失败");
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			if (!wrkDetlService.insert(wrkDetl)) {
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 3" + " - 保存工作档明细失败");
			throw new CoolException("保存工作档明细失败");
			}
			}
			}
			}
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("R"); // R.出库预约
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 4"+" - 更新源库位状态失败");
			throw new CoolException("更新源库位状态失败");
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("R"); // R.出库预约
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)) {
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 4" + " - 更新源库位状态失败");
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 5" + " - 源库位出库失败");
			throw new CoolException("源库位出库失败");
			}
			} else {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 5"+" - 源库位出库失败");
			throw new CoolException("源库位出库失败");
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 6"+" - 更新目标库位状态失败");
			throw new CoolException("更新目标库位状态失败");
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 6" + " - 更新目标库位状态失败");
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 7" + " - 移转失败");
			throw new CoolException("移转失败");
			}
			} else {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 7"+" - 移转失败");
			throw new CoolException("移转失败");
			}
			} catch (Exception e) {
			News.error(""+mark+"moveLocForDeepLoc"+" - 8"+" - 双深库位阻塞，对浅库位进行移转失败", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}

			/**
			* 堆垛机演示 ===>> 库位移转
			*/
			public synchronized void crnDemoOfLocMove1() {
			try {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			if (!crn.getDemo()) {
			continue;
			} // 必须为演示状态

			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			continue;
			}

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取移库工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
			if (null != wrkMast) {
			continue;
			}

			LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
			LocMast loc = locMastService.queryDemoLoc(crn.getId());
			if (null == sourceLoc \|\| null == loc) {
			continue;
			}

			String sourceLocNo = sourceLoc.getLocNo();
			String locNo = loc.getLocNo();

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(sourceLocNo); // 源库位
			wrkMast.setLocNo(locNo); // 目标库位
			wrkMast.setFullPlt("N"); // 满板：Y
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			// List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", sourceLocNo));
			// for (LocDetl locDetl : locDetls) {
			// WrkDetl wrkDetl = new WrkDetl();
			// wrkDetl.setWrkNo(workNo);
			// wrkDetl.setIoTime(new Date());
			// wrkDetl.setAnfme(locDetl.getAnfme());
			// VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			// wrkDetl.setAppeTime(new Date());
			// wrkDetl.setModiTime(new Date());
			// if (!wrkDetlService.insert(wrkDetl)) {
			// throw new CoolException("保存工作档明细失败");
			// }
			// }
			// 修改源库位状态
			if (sourceLoc.getLocSts().equals("D")) {
			sourceLoc.setLocSts("R"); // R.出库预约
			sourceLoc.setModiTime(new Date());
			if (!locMastService.updateById(sourceLoc)) {
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			throw new CoolException("移转失败");
			}

			}
			}
			} catch (Exception e) {
			News.error("堆垛机演示 ===>> 库位移转失败", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}

			/**
			* 堆垛机命令下发后，异步修改工作档状态
			*/
			public synchronized void crnIoWrkMast() {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			continue;
			}
			Date now = new Date();
			// 堆垛机正在运行
			if (crnProtocol.getStatusType() != CrnStatusType.IDLE && crnProtocol.getTaskNo() != 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取工作档
			WrkMast wrkMast = wrkMastMapper.selectById(crnProtocol.getTaskNo());
			if (wrkMast == null) {
			continue;
			}
			// 入库
			if (wrkMast.getWrkSts() == 1 \|\| wrkMast.getWrkSts() == 2) {
			News.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			// 修改工作档状态 2.设备上走 => 3.吊车入库中
			wrkMast.setWrkSts(3L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			News.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			}
			// 出库、移库
			if (wrkMast.getWrkSts() == 11) {
			News.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			News.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			}


			}

			}
			}

			/**
			* 入出库模式切换函数
			*/
			public synchronized void ioConvert() {
			try {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			Integer[] staNos;
			if (devp.getId() == 1) {
			staNos = new Integer[]{101, 103};
			}else {
			staNos = new Integer[]{305};
			}
			for (Integer staNo : staNos) {
			WrkMast pakout = wrkMastMapper.selectWorkingPakout(staNo);
			switch (staNo) {
			case 101://1F
			if (pakout != null) {
			if (devpThread.ioModeOf101 != IoModeType.PAKOUT_MODE) {
			// 出库切换中
			devpThread.ioModeOf101 = IoModeType.PAKOUT_BOOTING;
			WrkMast pakin = wrkMastMapper.selectWorkingPakin(staNo);
			if (pakin == null) {
			// 出库模式
			devpThread.ioModeOf101 = IoModeType.PAKOUT_MODE;
			}
			}
			} else {
			// 入库模式
			devpThread.ioModeOf101 = IoModeType.PAKIN_MODE;
			}
			break;
			case 103://1F
			if (pakout != null) {
			if (devpThread.ioModeOf103 != IoModeType.PAKOUT_MODE) {
			// 出库切换中
			devpThread.ioModeOf103 = IoModeType.PAKOUT_BOOTING;
			WrkMast pakin = wrkMastMapper.selectWorkingPakin(staNo);
			if (pakin == null) {
			// 出库模式
			devpThread.ioModeOf103 = IoModeType.PAKOUT_MODE;
			}
			}
			} else {
			// 入库模式
			devpThread.ioModeOf103 = IoModeType.PAKIN_MODE;
			}
			break;
			case 305://1F
			if (pakout != null) {
			if (devpThread.ioModeOf305 != IoModeType.PAKOUT_MODE) {
			// 出库切换中
			devpThread.ioModeOf305 = IoModeType.PAKOUT_BOOTING;
			WrkMast pakin = wrkMastMapper.selectWorkingPakin(staNo);
			if (pakin == null) {
			// 出库模式
			devpThread.ioModeOf305 = IoModeType.PAKOUT_MODE;
			}
			}
			} else {
			// 入库模式
			devpThread.ioModeOf305 = IoModeType.PAKIN_MODE;
			}
			break;
			}
			}

			}

			} catch (Exception e) {
			e.printStackTrace();
			}


			}

			/**
			@@ -2245,901 +1661,209 @@
			// News.infoNoLog(""+mark+" - 0"+" - outOfDevp执行完成");
			}


			public synchronized void autoEmptyOut() {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			List<Integer> list = new ArrayList<>();
			list.add(101);list.add(112);
			Map<Integer,Integer> map = new HashMap<>();
			map.put(101,102);map.put(112,111);
			for (Integer site:list){
			WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("sta_no", map.get(site)));
			if (!Cools.isEmpty(wrkMast)){
			continue;
			}
			//如果站点可出禁用，则不生成空盘出库任务
			StaProtocol staProtocol = devpThread.getStation().get(site);
			/**
			* 生成空子/母托盘出库任务
			*/
			public synchronized void generateEmptyPalletStoreWrk() {
			Integer devpId = 1;
			for (Map.Entry<Integer, String> entry : emptyPalletSiteMap.entrySet()) {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devpId);
			StaProtocol staProtocol = devpThread.getStation().get(entry.getKey());
			if (staProtocol == null) {
			return;
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing() //自动
			&& !staProtocol.isLoading() //无物
			&& staProtocol.isOutEnable() //可出信号
			&& staProtocol.getWorkNo() == 0
			) {
			WrkMast pakoutEmpty = wrkMastMapper.selectPakoutEmpty(site);
			if (null != pakoutEmpty) {
			return;

			// 自动&无物&可出
			if (staProtocol.isAutoing() && !staProtocol.isLoading() && staProtocol.isOutEnable()) {
			// 判断是否已经生成任务
			if (wrkMastService.selectList(new EntityWrapper<WrkMast>().in("io_type", 111,112).eq("sta_no", entry.getKey())).size() > 0) {
			log.warn("{}站点已经存在空板出库任务", entry.getKey());
			continue;
			}
			Short loctype1 = 1;
			if (site == 101){
			loctype1 = 2;
			}
			LocTypeDto locTypeDto = new LocTypeDto(loctype1, (short) 1, (short) 1);
			locTypeDto.setSiteId(site);
			Map<String, String> map = new HashMap<>();
			map.put("site", String.valueOf(entry.getKey()));
			map.put("flag", entry.getValue());
			String response = "";
			try {
			String response = new HttpHandler.Builder()
			response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/auto/emptyOut/v1")
			.setJson(JSON.toJSONString(locTypeDto))
			.setJson(JSON.toJSONString(map))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			String data = jsonObject.get("data").toString();
			News.info((String) jsonObject.get("msg")+","+data);
			log.info("空托出库请求成功：请求参数{}，返回值:{}", map, response);
			} else {
			News.warnNoLog("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1","", response);
			log.error("空拖出库请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1", map, response);
			}
			} catch (Exception e) {
			log.error("空拖出库请求接口异常！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1", map, response);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			}

			}

			public synchronized void autoEmptyIn() {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			List<Integer> list = new ArrayList<>();
			list.add(153);list.add(157);
			for (Integer site:list){
			/**
			* 托盘到达rgv接驳站点，更改工作档状态为9.呼叫RGV，环穿程序调度rgv
			*/
			public synchronized void callRgv() {
			// 输送线plc编号
			Integer devpPlcId = 1;
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, devpPlcId);
			for (Integer site : rgvConnectionSiteList) {
			StaProtocol staProtocol = devpThread.getStation().get(site);
			if (staProtocol == null) {
			return;
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing() //自动
			&& staProtocol.isLoading() //有物
			&& staProtocol.isInEnable() //可入信号
			&& staProtocol.isPakMk()
			&& (staProtocol.getWorkNo() == 0 \|\| staProtocol.getWorkNo() > 9990) //工作号为0或者工作号是9991~9999（输送机留用）
			) {

			try {
			Short loctype1 = 1;
			if (site == 153){
			loctype1 = 2;
			}
			LocTypeDto locTypeDto = new LocTypeDto(loctype1, (short) 1, (short) 1);
			locTypeDto.setSiteId(site);

			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/auto/emptyIn/v1")
			.setJson(JSON.toJSONString(locTypeDto))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			News.info((String) jsonObject.get("msg"));
			staProtocol.setWorkNo(jsonObject.get("data").hashCode());
			staProtocol.setStaNo(site.shortValue());
			devpThread.setPakMk(site,false);
			MessageQueue.offer(SlaveType.Devp, 1, new Task(2, staProtocol));
			} else {
			News.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyIn/v1", JSON.toJSONString(locTypeDto), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.getWorkNo() != 0) {
			// 查询工作档
			WrkMast wrkMast = wrkMastMapper.selectByWrkNo(staProtocol.getWorkNo());
			if ((wrkMast.getWrkSts() == 2 \|\| wrkMast.getWrkSts() == 15) && wrkMast.getRgvNo() == null) {
			wrkMast.setRgvNo(0);
			wrkMast.setRgvSstaNo(site);
			wrkMast.setRgvDstaNo(taskStaNoToRgvStaNoMap.get(wrkMast.getStaNo()));
			wrkMast.setModiTime(new Date());
			wrkMastMapper.updateById(wrkMast);
			log.info("任务号：{}已到达rgv接驳位，准备呼叫rgv...", wrkMast.getWrkNo());
			}
			}

			}

			}

			/*
			* 小车地图更新更新锁
			* */
			public synchronized boolean rgvMapUpdate(BasRgvMap basRgvMapCurrent,Integer staStart,Integer staEnd,String sign){

			// List<Integer> integers = RouteUtils.RouteMapCurrentFar(basRgvMapCurrent.getNowRoute(),staStart,staEnd, basRgvMapCurrent.getLockStartRoute());
			//更新当前小车锁
			try{
			Integer farCurrentStaNo = RouteUtils.RouteIndexFarMas(basRgvMapCurrent.getNowRoute(), staStart, staEnd, basRgvMapCurrent.getLockStartRoute());//获取最远站点
			Integer fallMerge = RouteUtils.RouteIndexFarMas(basRgvMapCurrent.getRgvNo(), farCurrentStaNo); //获取合并干涉项
			basRgvMapCurrent.setLockEndRoute(fallMerge);
			Integer i = basRgvMapMapper.updateById(basRgvMapCurrent);
			// if (i>0){
			log.error("{}:==>{}:{}号车更新结束锁,{}",sign,new Date(),basRgvMapCurrent.getRgvNo(),JSON.toJSONString(basRgvMapCurrent));
			// }

			//更新另一台小车地图
			Integer rgvNoOther = basRgvMapCurrent.getRgvNoOther(basRgvMapCurrent.getRgvNo());
			BasRgvMap basRgvMapOther = basRgvMapMapper.selectById(rgvNoOther);
			List<Integer> integers = RouteUtils.RouteMapCurrentFar(fallMerge, basRgvMapCurrent.getLockStartRoute());
			Integer lockEndRoute = RouteUtils.RouteMapOtherFarStnNo(integers, basRgvMapCurrent.getLockStartRoute());//另一台小车可活动最远位置
			basRgvMapOther.setEndRoute(lockEndRoute);
			Integer i1 = basRgvMapMapper.updateById(basRgvMapOther);
			// if (i1>0){
			log.error("{}:==>{}:{}号车更新结束位置,{}",sign,new Date(),basRgvMapOther.getRgvNo(),JSON.toJSONString(basRgvMapOther));
			// }
			return true;
			}catch (Exception e){
			log.error("小车地图更新出错！");
			return false;
			}
			}

			/*
			* 刷新地图数据
			* */
			public synchronized void refreshRgvMap() {
			try{
			List<BasRgvMap> basRgvMaps = basRgvMapService.selectList(new EntityWrapper<>());
			for (BasRgvMap rgvSlave:basRgvMaps) {
			RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getRgvNo());
			RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			if (rgvProtocol == null) {
			continue;
			}else {
			rgvProtocol = rgvProtocol.clone();
			}
			BasRgv basRgv = basRgvService.selectById(rgvSlave.getRgvNo());
			if (basRgv == null) {
			log.error("{}号RGV尚未在数据库进行维护！2", rgvSlave.getRgvNo());
			continue;
			}

			// 只有当RGV空闲、自动,工位一无物//rgv可用
			if (rgvProtocol.getStatusType() == RgvStatusType.IDLE &&
			rgvProtocol.getModeType() == RgvModeType.AUTO
			&& rgvProtocol.getLoaded1()==0 //现场修改：叠盘机，不满都算无物，怎么判断需要跟电控对接
			&& (rgvProtocol.getTaskNo1()==0)
			&&rgvThread.isPakMk()
			) {
			BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());

			Integer rgvNoOther = basRgvMap.getRgvNoOther(rgvProtocol.getRgvNo());
			RgvThread rgvThreadOther = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvNoOther);
			RgvProtocol rgvProtocolOther = rgvThreadOther.getRgvProtocol();
			if (rgvProtocolOther == null) {
			continue;
			}else {
			rgvProtocolOther = rgvProtocolOther.clone();
			}
			if (rgvProtocolOther.getStatusType() == RgvStatusType.IDLE
			&& rgvProtocolOther.getModeType() == RgvModeType.AUTO
			&& rgvProtocolOther.getLoaded1()==0
			&& (rgvProtocolOther.getTaskNo1()==0)
			&&rgvThreadOther.isPakMk()
			){
			//对工作档进行判断
			basRgvMap.setNowRoute(rgvProtocol.getRgvPosI());
			if (rgvProtocol.getTaskNo1() >0 && rgvProtocol.getTaskNo1()<=9000){
			WrkMastSta wrkMastSta = wrkMastStaMapper.selectByWrkNo(rgvProtocol.getTaskNo1().intValue());
			rgvMapUpdate(basRgvMap, wrkMastSta.getStaStart(), wrkMastSta.getStaEnd(),"2366");
			}else if (rgvProtocol.getTaskNo1() == 0){
			rgvMapUpdate(basRgvMap,basRgvMap.getStartRoute(),basRgvMap.getStartRoute(),"2366");
			}

			}



			}
			}
			}catch (Exception e){
			log.error("4109行执行小车初始化任务下发失败");
			log.error("4109行"+e);
			}
			}


			/**
			* 完成小车任务
			* 母托盘叠满自动入库
			*/
			public synchronized void rgvCompleteWrkMastSta() {
			try{
			for (DevpSlave devp : slaveProperties.getDevp()) {
			List<BasRgvMap> basRgvMaps = basRgvMapService.selectList(new EntityWrapper<>());
			for (BasRgvMap rgvSlave:basRgvMaps) {
			RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getRgvNo());
			RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			if (rgvProtocol == null) {
			public synchronized void autoEmptyIn() {

			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历空板入库口
			for (Integer site : stackingSite) {
			// 获取空板入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(site);
			if (staProtocol == null) {
			continue;
			}else {
			rgvProtocol = rgvProtocol.clone();
			} else {
			staProtocol = staProtocol.clone();
			}
			BasRgv basRgv = basRgvService.selectById(rgvSlave.getRgvNo());
			if (basRgv == null) {
			log.error("{}号RGV尚未在数据库进行维护！3", rgvSlave.getRgvNo());

			if (!staProtocol.isLoading()){
			continue;
			}

			// 只有当RGV等待WCS确认、自动
			if ((rgvProtocol.getStatusType1() == RgvStatusType.WAITING \|\| rgvProtocol.getStatusType1()==RgvStatusType.FETCHWAITING)
			&& rgvProtocol.getModeType() == RgvModeType.AUTO
			&& (rgvProtocol.getStatusType() == RgvStatusType.WORKING1)
			){
			log.info("{}号小车等待wcs确认，状态{}，参数{}",rgvProtocol.getRgvNo(),rgvProtocol.getStatusType(),rgvProtocol);
			if (rgvProtocol.getTaskNo1()!=0){
			if (rgvProtocol.getTaskNo1()==32222){
			boolean rgvComplete = rgvComplete(rgvProtocol.getRgvNo());
			if (!rgvComplete){
			log.error("小车复位失败，小车号{}！",rgvProtocol.getRgvNo());
			}
			BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());
			basRgvMap.setNowRoute(rgvProtocol.getRgvPosI());
			rgvMapUpdate(basRgvMap,basRgvMap.getStartRoute(),basRgvMap.getStartRoute(),"2415");
			rgvThread.setPakMk(true);
			break;
			}
			WrkMastSta wrkMastSta = wrkMastStaMapper.selectByWrkNo(rgvProtocol.getTaskNo1().intValue());
			if (Cools.isEmpty(wrkMastSta) \|\| wrkMastSta.getWrkSts()!=1){
			log.error("未查到小车执行任务或者执行任务状态不符合！"+wrkMastSta);
			continue;
			}

			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(wrkMastSta.getStaEnd());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (!staProtocol.isAutoing() \|\| !staProtocol.isLoading()){
			continue;
			}
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(wrkMastSta.getWrkNo().intValue());
			if (!Cools.isEmpty(wrkMast)){
			if (!staProtocol.isPakMk()){
			continue;
			}
			// 下发站点信息
			staProtocol.setWorkNo(wrkMast.getWrkNo());
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			log.error("rgv任务完成给输送线下发命令："+wrkMast.getWrkNo()+","+wrkMast.getStaNo());
			if (!MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol))) {
			continue;
			}
			}else {
			log.error("rgv任务完成给输送线下发命令,但未查询到工作档");
			// 下发站点信息
			Map<Integer,Integer> map = new HashMap<>();
			map.put(101,102);map.put(112,111);
			map.put(100,100);
			staProtocol.setWorkNo(rgvProtocol.getTaskNo1().intValue());
			staProtocol.setStaNo(map.get(rgvProtocol.getRgvPosI()).shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			// log.error("rgv任务完成给输送线下发命令："+wrkMast.getWrkNo()+","+wrkMast.getStaNo());
			if (!MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol))) {
			continue;
			}
			}
			boolean rgvComplete = rgvComplete(rgvProtocol.getRgvNo());
			// boolean rgvComplete = true;
			if (!rgvComplete){
			log.error("小车复位失败，小车号{}！",rgvProtocol.getRgvNo());
			break;
			}
			WrkMast wrkMast1 = wrkMastService.selectByWrkNo(rgvProtocol.getTaskNo1().intValue());
			wrkMast1.setUpdMk("Y");

			wrkMastService.updateById(wrkMast1);

			wrkMastSta.setWrkSts(3);
			wrkMastStaMapper.updateById(wrkMastSta);
			BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());
			basRgvMap.setNowRoute(rgvProtocol.getRgvPosI());
			rgvMapUpdate(basRgvMap,basRgvMap.getStartRoute(),basRgvMap.getStartRoute(),"2471");
			rgvThread.setPakMk(true);
			}

			else {
			log.error("小车复位失败，小车号{},等待wcs确认但是没有工作号！",rgvProtocol.getRgvNo());
			}
			}
			}
			}
			}catch (Exception e){
			log.error("小车复位线程报错！"+e);
			}
			}
			/**
			* 执行小车搬运任务
			*/
			public synchronized void rgvRunWrkMastFullSta() {
			boolean wrkEnable = false;
			try{
			List<BasRgvMap> basRgvMaps = basRgvMapService.selectList(new EntityWrapper<>());
			for (BasRgvMap rgvSlave:basRgvMaps) {
			RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getRgvNo());
			RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			if (rgvProtocol == null) {
			continue;
			}else {
			rgvProtocol = rgvProtocol.clone();
			}
			BasRgv basRgv = basRgvService.selectById(rgvSlave.getRgvNo());
			if (basRgv == null) {
			log.error("{}号RGV尚未在数据库进行维护！4", rgvSlave.getRgvNo());
			continue;
			}

			// 只有当RGV空闲、自动,工位一无物//rgv可用
			if (rgvProtocol.getStatusType() == RgvStatusType.IDLE
			&& rgvProtocol.getModeType() == RgvModeType.AUTO
			&& rgvProtocol.getLoaded1()==0
			&& rgvProtocol.getTaskNo1() == 0
			// 站点条件判断
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& staProtocol.isEmptyMk()
			&& staProtocol.isPakMk()
			&& staProtocol.getWorkNo() == 0
			) {
			BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());
			if (basRgvMap == null) {
			log.error("{}号RGV尚未在数据库地图中进行维护！", rgvProtocol.getRgvNo());
			continue;
			}
			List<Integer> route = RouteUtils.getRoute(basRgvMap.getStartRoute(), basRgvMap.getEndRoute());
			basRgvMap.setNowRoute(rgvProtocol.getRgvPosI()); //更新小车当前位置站点号
			List<WrkMastSta> wrkMastStaList = wrkMastStaMapper.selectNoInterfereList(route, route);
			for (WrkMastSta wrkMastSta : wrkMastStaList){
			if (wrkMastSta.getType()!=0 \|\| wrkMastSta.getWrkType()!=3){//1:满版 3：取放
			continue;
			}
			boolean sign = rgvTakeFullAll(basRgvMap.getRgvNo(), wrkMastSta); //命令下发
			wrkEnable = true;
			if (sign){
			rgvThread.setPakMk(false);
			boolean signMap = rgvMapUpdate(basRgvMap, wrkMastSta.getStaStart(), wrkMastSta.getStaEnd(),"2526");
			if (signMap){
			Thread.sleep(300);
			wrkMastSta.setWrkSts(1);
			try{
			wrkMastStaMapper.updateById(wrkMastSta);
			return;
			}catch (Exception e){
			log.error("更新小车任务失败");
			}
			break;
			}else {
			log.error("3864行，货物搬运任务：工作号{}所属任务下发后地图同步失败",wrkMastSta.getWrkNo());

			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

			SearchLocParam param = new SearchLocParam();
			param.setIoType(10);
			param.setSourceStaNo(site);
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(dto.getWorkNo());
			staProtocol.setStaNo(staProtocol.getSiteId().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			log.error("输送线下发6："+dto.getWorkNo()+","+staProtocol.getSiteId());
			if (!result) {
			News.errorNoLog(""+" - 1"+" - 更新plc站点信息失败");
			throw new CoolException("更新plc站点信息失败");
			}
			} else {
			log.error("工作号{}所属任务下发失败",wrkMastSta.getWrkNo());
			News.error(" - 3"+" - 母托叠盘入库请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}
			break;
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			} else {
			News.errorNoLog(" - 母托叠盘入库站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isAutoing()+"、可入信号：" + staProtocol.isInEnable()
			+"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
			+"、锁定标记"+ staProtocol.isPakMk());
			}

			}
			if (!wrkEnable){
			rgvRunWrkMastEmptyStaAvoidance();
			}
			}catch (Exception e){
			log.error("3875行执行小车搬运任务下发失败");
			log.error("3875行"+e);
			}

			}

			/**
			* 执行小车搬运任务
			* 空桶罐装完成到达罐装线rgv口完成直供罐装线任务和空桶出库任务，创建成品桶入库任务
			*/
			// public synchronized void rgvRunWrkMastEmptyStaPut() {//放
			// try{
			// for (RgvSlave rgvSlave:slaveProperties.getRgv()) {
			// RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getId());
			// RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			// if (rgvProtocol == null) {
			// continue;
			// }
			// BasRgv basRgv = basRgvService.selectById(rgvSlave.getId());
			// if (basRgv == null) {
			// log.error("{}号RGV尚未在数据库进行维护！5", rgvSlave.getId());
			// continue;
			// }
			//
			// // 只有当RGV空闲、自动,工位二有物//rgv可用
			// if (rgvProtocol.getStatusType() == RgvStatusType.IDLE
			// && rgvProtocol.getModeType() == RgvModeType.AUTO
			// && rgvProtocol.getLoaded1()==1 //现场修改：叠盘机，不满都算无物，怎么判断需要跟电控对接
			// ) {
			// BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());
			// if (basRgvMap == null) {
			// log.error("{}号RGV尚未在数据库地图中进行维护！", rgvProtocol.getRgvNo());
			// continue;
			// }
			// basRgvMap.setNowRoute(rgvProtocol.getRgvPosI()); //更新小车当前位置站点号
			// List<Integer> route = RouteUtils.getRoute(basRgvMap.getStartRoute(), basRgvMap.getEndRoute());//获取活动范围
			// List<WrkMastSta> wrkMastStaList = wrkMastStaMapper.selectNoInterfereList(route, route);//查询可执行任务
			// for (WrkMastSta wrkMastSta : wrkMastStaList){
			// if (wrkMastSta.getType()!=2 \|\| (wrkMastSta.getWrkType()!=2 && wrkMastSta.getWrkType()!=4)){// 2:空板 2:放 4：拆盘
			// continue;
			// }
			// boolean sign = false;
			// if (wrkMastSta.getStaStart()==0 && wrkMastSta.getStaEnd()!=0){//放
			// sign = rgvPutEmpty(rgvProtocol.getRgvNo(),wrkMastSta);
			// }else {
			// continue;
			// }
			// if (sign){
			// boolean signMap = rgvMapUpdate(basRgvMap, basRgvMap.getStartRoute(), wrkMastSta.getStaEnd());
			// if (signMap){
			// wrkMastSta.setWrkSts(2);
			// try{
			// wrkMastStaMapper.updateById(wrkMastSta);
			// }catch (Exception e){
			// log.error("更新小车任务失败");
			// }
			// return;
			// }else {
			// log.error("3857行，货物搬运任务：工作号{}所属任务下发后地图同步失败",wrkMastSta.getWrkNo());
			// }
			// }else {
			// log.error("工作号{}所属任务下发失败",wrkMastSta.getWrkNo());
			// }
			// break;
			// }
			// }
			// }
			// }catch (Exception e){
			// log.error("3933行执行小车放空板任务下发失败");
			// log.error("3933行"+e);
			// }
			// }

			// public synchronized void rgvRunWrkMastEmptyStaTake() {//取
			// try{
			// for (RgvSlave rgvSlave:slaveProperties.getRgv()) {
			// RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getId());
			// RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			// if (rgvProtocol == null) {
			// continue;
			// }
			// BasRgv basRgv = basRgvService.selectById(rgvSlave.getId());
			// if (basRgv == null) {
			// log.error("{}号RGV尚未在数据库进行维护！6", rgvSlave.getId());
			// continue;
			// }
			//
			// // 只有当RGV空闲、自动,工位二无物//rgv可用
			// if (rgvProtocol.getStatusType() == RgvStatusType.IDLE
			// && rgvProtocol.getModeType() == RgvModeType.AUTO
			// && rgvProtocol.getLoaded1()==0 //现场修改：叠盘机，不满都算无物，怎么判断需要跟电控对接
			// ) {
			// BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());
			// if (basRgvMap == null) {
			// log.error("{}号RGV尚未在数据库地图中进行维护！", rgvProtocol.getRgvNo());
			// continue;
			// }
			// List<Integer> route = RouteUtils.getRoute(basRgvMap.getStartRoute(), basRgvMap.getEndRoute());
			// basRgvMap.setNowRoute(rgvProtocol.getRgvPosI()); //更新小车当前位置站点号
			// List<WrkMastSta> wrkMastStaList = wrkMastStaMapper.selectNoInterfereList(route, route);
			// for (WrkMastSta wrkMastSta : wrkMastStaList){
			// if (wrkMastSta.getType()!=2 \|\| wrkMastSta.getWrkType()!=1){// 2:空板 1:取
			// continue;
			// }
			// boolean sign = false;
			// if (wrkMastSta.getStaEnd()==0 && wrkMastSta.getStaStart()!=0){//取
			// sign = rgvTakeEmpty(rgvProtocol.getRgvNo(),wrkMastSta);
			// } else {
			// continue;
			// }
			// if (sign){
			// boolean signMap = rgvMapUpdate(basRgvMap, wrkMastSta.getStaStart(), basRgvMap.getStartRoute());
			// if (signMap){
			// wrkMastSta.setWrkSts(1);
			// try{
			// wrkMastStaMapper.updateById(wrkMastSta);
			// }catch (Exception e){
			// log.error("更新小车任务失败");
			// }
			// return;
			// }else {
			// log.error("3879行，货物搬运任务：工作号{}所属任务下发后地图同步失败",wrkMastSta.getWrkNo());
			// }
			// }else {
			// log.error("工作号{}所属任务下发失败",wrkMastSta.getWrkNo());
			// }
			// break;
			// }
			// }
			// }
			// }catch (Exception e){
			// log.error("3989行执行小车取空板任务下发失败");
			// log.error("3989行"+e);
			// }
			// }

			/*
			* 有任务但未执行此时需要调整小车位置
			* */
			public synchronized void rgvRunWrkMastEmptyStaAvoidance() {
			try{
			Integer integer = wrkMastStaMapper.selectAllWrkStsCount(null,0);//查询状态为0的任务
			if (integer==0){
			return;
			}
			List<BasRgvMap> basRgvMaps = basRgvMapService.selectList(new EntityWrapper<>());
			for (BasRgvMap rgvSlave:basRgvMaps) {
			RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getRgvNo());
			RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			if (rgvProtocol == null) {
			continue;
			}else {
			rgvProtocol = rgvProtocol.clone();
			}
			BasRgv basRgv = basRgvService.selectById(rgvSlave.getRgvNo());
			if (basRgv == null) {
			log.error("{}号RGV尚未在数据库进行维护！1", rgvSlave.getRgvNo());
			continue;
			}

			// 只有当RGV空闲、自动,工位一无物//rgv可用
			if (rgvProtocol.getStatusType() == RgvStatusType.IDLE
			&& rgvProtocol.getModeType() == RgvModeType.AUTO
			&& rgvProtocol.getLoaded1()==0 //现场修改：叠盘机，不满都算无物，怎么判断需要跟电控对接
			&& rgvProtocol.getTaskNo1()==0
			&& rgvProtocol.getStatusType1() == RgvStatusType.IDLE
			// && rgvProtocol.getTaskNo2()==0
			) {
			BasRgvMap basRgvMap = basRgvMapMapper.selectById(rgvProtocol.getRgvNo());
			if (rgvProtocol.getRgvPosI().equals(basRgvMap.getStartRoute())){
			continue;
			}
			// if (rgvProtocol.getRgvNo()==1 && rgvProtocol.getRgvPosI().equals(100)){
			// continue;
			// } else if (rgvProtocol.getRgvNo()==2 && rgvProtocol.getRgvPosI().equals(157) ){
			// continue;
			// }
			rgvAvoidanceXY(rgvProtocol.getRgvNo());
			rgvMapUpdate(basRgvMap,basRgvMap.getStartRoute(),basRgvMap.getStartRoute(),"2727");
			}
			}
			}catch (Exception e){
			log.error("4109行执行小车初始化任务下发失败");
			log.error("4109行"+e);
			}
			}

			/*
			* 小车XY移动避让
			* */
			public synchronized boolean rgvAvoidanceXY(Integer rgvId){
			BasRgvMap basRgvMap = basRgvMapService.selectByRgvNo(rgvId);
			if (basRgvMap.getStartRoute() == 100 \|\| basRgvMap.getStartRoute() == 101){
			try{

			// 命令下发区 --------------------------------------------------------------------------
			RgvCommand rgvCommand = new RgvCommand();
			rgvCommand.setRgvNo(rgvId); // RGV编号
			rgvCommand.setAckFinish1((short) 0); // 工位1任务完成确认位
			rgvCommand.setTaskNo1((short)32222); // 工位1工作号
			rgvCommand.setTaskMode1(RgvTaskModeType.X_MOVE); // 工位1任务模式: 回原点
			//basRgvMap.getLockStartRoute().shortValue()
			rgvCommand.setSourceStaNo1(basRgvMap.getStartRoute().shortValue());
			rgvCommand.setCommand((short) 1); //工位1任务确认
			if (!MessageQueue.offer(SlaveType.Rgv, rgvId, new Task(4, rgvCommand))) {
			//step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务 step=9，回原点 9999任务号
			log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			return false;
			} else {
			return true;
			}
			}catch (Exception e){
			return false;

			}
			}else {
			try{
			// 命令下发区 --------------------------------------------------------------------------
			RgvCommand rgvCommand = new RgvCommand();
			rgvCommand.setRgvNo(rgvId); // RGV编号
			rgvCommand.setAckFinish1((short) 0); // 工位1任务完成确认位
			rgvCommand.setTaskNo1((short)32222); // 工位1工作号
			rgvCommand.setTaskMode1(RgvTaskModeType.X_MOVE); // 工位1任务模式: 回原点
			//basRgvMap.getLockStartRoute().shortValue()
			rgvCommand.setSourceStaNo1(basRgvMap.getStartRoute().shortValue());
			rgvCommand.setCommand((short) 1); //工位1任务确认
			if (!MessageQueue.offer(SlaveType.Rgv, rgvId, new Task(4, rgvCommand))) {
			//step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务 step=9，回原点 9999任务号
			log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			return false;
			} else {
			return true;
			}
			}catch (Exception e){
			return false;

			}
			}
			}


			/*
			* 小车取货至工位任务
			* */
			public synchronized boolean rgvTakeFullAll(Integer rgvId,WrkMastSta wrkMastSta){
			try{
			// 命令下发区 --------------------------------------------------------------------------
			RgvCommand rgvCommand = new RgvCommand();
			rgvCommand.setRgvNo(rgvId); // RGV编号
			rgvCommand.setAckFinish1((short) 0); // 工位1任务完成确认位
			rgvCommand.setTaskNo1(wrkMastSta.getWrkNo().shortValue()); // 工位1工作号
			rgvCommand.setTaskMode1(RgvTaskModeType.FETCH_PUT); // 工位1任务模式: 取放货
			rgvCommand.setSourceStaNo1(wrkMastSta.getStaStart().shortValue()); //工位1起点
			rgvCommand.setDestinationStaNo1(wrkMastSta.getStaEnd().shortValue()); //工位1目标站点
			rgvCommand.setCommand((short) 1); //工位1任务确认
			if (!MessageQueue.offer(SlaveType.Rgv, rgvId, new Task(4, rgvCommand))) {
			//step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务
			log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			return false;
			} else {
			return true;
			}
			}catch (Exception e){
			return false;
			}
			}

			/*
			* 小车取货至工位任务
			* */
			// public synchronized boolean rgvTakeFull(Integer rgvId,WrkMastSta wrkMastSta){
			// try{
			// // 命令下发区 --------------------------------------------------------------------------
			// RgvCommand rgvCommand = new RgvCommand();
			// rgvCommand.setRgvNo(rgvId); // RGV编号
			// rgvCommand.setAckFinish1((short) 0); // 工位1任务完成确认位
			// rgvCommand.setTaskNo1(wrkMastSta.getWrkNo().shortValue()); // 工位1工作号
			// rgvCommand.setTaskMode1(RgvTaskModeType.FETCH); // 工位1任务模式: 取货
			// rgvCommand.setSourceStaNo1(wrkMastSta.getStaStart().shortValue()); //工位1起点
			// rgvCommand.setCommand((short) 1); //工位1任务确认
			// if (!MessageQueue.offer(SlaveType.Rgv, rgvId, new Task(4, rgvCommand))) {
			// //step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务
			// log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			// return false;
			// } else {
			// return true;
			// }
			// }catch (Exception e){
			// return false;
			// }
			// }

			/*
			* 小车放货至输送线任务
			* */
			// public synchronized boolean rgvPutFull(Integer rgvId,WrkMastSta wrkMastSta){
			// try{
			// // 命令下发区 --------------------------------------------------------------------------
			// RgvCommand rgvCommand = new RgvCommand();
			// rgvCommand.setRgvNo(rgvId); // RGV编号
			// rgvCommand.setAckFinish1((short) 0); // 工位1任务完成确认位
			// rgvCommand.setTaskNo1(wrkMastSta.getWrkNo().shortValue()); // 工位1工作号
			// rgvCommand.setTaskMode1(RgvTaskModeType.PUT); // 工位1任务模式: 放货
			// rgvCommand.setDestinationStaNo1(wrkMastSta.getStaEnd().shortValue()); //工位1目标站点
			// rgvCommand.setCommand((short) 1); //工位1任务确认
			// if (!MessageQueue.offer(SlaveType.Rgv, rgvId, new Task(4, rgvCommand))) {
			// //step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务
			// log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			// return false;
			// } else {
			// return true;
			// }
			// }catch (Exception e){
			// return false;
			// }
			// }

			/*
			* 小车取空板至工位任务
			* */
			// public synchronized boolean rgvTakeEmpty(Integer rgvId,WrkMastSta wrkMastSta){
			// try{
			// // 命令下发区 --------------------------------------------------------------------------
			// RgvCommand rgvCommand = new RgvCommand();
			// rgvCommand.setRgvNo(rgvId); // RGV编号
			// rgvCommand.setAckFinish2((short) 0); // 工位2任务完成确认位
			// rgvCommand.setTaskNo2(wrkMastSta.getWrkNo().shortValue()); // 工位2工作号
			// rgvCommand.setTaskMode2(RgvTaskModeType.FETCH); // 工位2任务模式: 取货
			// rgvCommand.setSourceStaNo2(wrkMastSta.getStaStart().shortValue()); //工位2起点
			// rgvCommand.setCommand((short) 2); //工位2任务确认
			// if (!MessageQueue.offer(SlaveType.Crn, rgvId, new Task(5, rgvCommand))) {
			// //step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务
			// log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			// return false;
			// } else {
			// return true;
			// }
			// }catch (Exception e){
			// return false;
			// }
			// }

			/*
			* 小车放空板至输送线任务
			* */
			// public synchronized boolean rgvPutEmpty(Integer rgvId,WrkMastSta wrkMastSta){
			// try{
			// // 命令下发区 --------------------------------------------------------------------------
			// RgvCommand rgvCommand = new RgvCommand();
			// rgvCommand.setRgvNo(rgvId); // RGV编号
			// rgvCommand.setAckFinish2((short) 0); // 工位2任务完成确认位
			// rgvCommand.setTaskNo2(wrkMastSta.getWrkNo().shortValue()); // 工位2工作号
			// rgvCommand.setTaskMode2(RgvTaskModeType.PUT); // 工位2任务模式: 放货
			// rgvCommand.setDestinationStaNo2(wrkMastSta.getStaEnd().shortValue()); //工位2目标站点
			// rgvCommand.setCommand((short) 2); //工位2任务确认
			// if (!MessageQueue.offer(SlaveType.Crn, rgvId, new Task(5, rgvCommand))) {
			// //step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务
			// log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvId, JSON.toJSON(rgvCommand));
			// return false;
			// } else {
			// return true;
			// }
			// }catch (Exception e){
			// return false;
			// }
			// }

			/*
			* 小车复位
			* */
			public synchronized boolean rgvComplete(Integer rgvId){
			try{
			// 命令下发区 --------------------------------------------------------------------------
			if (!MessageQueue.offer(SlaveType.Rgv, rgvId, new Task(3, new RgvCommand()))) {
			//step=2,工位1、2写任务； step=4，工位1写任务； step=5，工位2写任务
			log.error("RGV命令下发失败，RGV号={}",rgvId);
			return false;
			} else {
			log.info("RGV命令下发成功，RGV号={}",rgvId);
			return true;
			}
			}catch (Exception e){
			log.error("RGV命令下发失败，RGV号={}。异常："+e,rgvId);
			return false;
			}
			}

			public synchronized void autoMoveLoc() {
			WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("wrk_sts", 16L));
			if (wrkMast == null \|\| wrkMast.getStaNo() != 104 && wrkMast.getStaNo() != 107) {
			return;
			}
			// 判断源站点情况有任务号，有物，自动
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			StaProtocol staProtocol106 = devpThread.getStation().get(106);
			StaProtocol staProtocol105 = devpThread.getStation().get(105);
			StaProtocol staProtocol107 = devpThread.getStation().get(107);
			if (staProtocol106 == null) {
			return;
			} else {
			staProtocol106 = staProtocol106.clone();
			}
			if (staProtocol105 == null) {
			return;
			} else {
			staProtocol105 = staProtocol105.clone();
			}
			if (staProtocol107 == null) {
			return;
			} else {
			staProtocol107 = staProtocol107.clone();
			}

			if (wrkMast.getStaNo() == 104) {
			// 判断出库站点情况,可入，堆垛机可以取货，可出，堆垛机可以放货
			if (!staProtocol106.isInEnable() \|\| !staProtocol105.isOutEnable() \|\| !staProtocol105.isLoading()) {
			return;
			}
			} else if (wrkMast.getStaNo() == 107) {
			if (!staProtocol106.isInEnable() \|\| !staProtocol107.isOutEnable() \|\| staProtocol107.isLoading()) {
			return;
			}
			}

			// 获取堆垛机信息并判断是否可入出
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, 1);
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			return;
			}
			BasCrnp basCrnp = basCrnpService.selectById(1);
			if (!basCrnp.getInEnable().equals("Y") && !basCrnp.getOutEnable().equals("Y")) {
			return;
			}

			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			return;
			}

			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(1) != null) {
			return;
			}
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(1); // 堆垛机编号
			crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX((short) 3); // 源库位排
			crnCommand.setSourcePosY((short) 28); // 源库位列
			crnCommand.setSourcePosZ((short) 1); // 源库位层
			crnCommand.setDestinationPosX((short) 1); // 目标库位排
			crnCommand.setDestinationPosY((short) 28); // 目标库位列
			crnCommand.setDestinationPosZ((short) 1); // 目标库位层
			if(wrkMast.getStaNo() == 104) { // 目标站104，出到105位置
			crnCommand.setDestinationPosX((short) 2); // 目标库位排
			crnCommand.setDestinationPosY((short) 4); // 目标库位列
			crnCommand.setDestinationPosZ((short) 1); // 目标库位层
			}
			crnCommand.setCommand((short)1);
			crnCommand.setTraySize(true); //库位类型
			if (!MessageQueue.offer(SlaveType.Crn, 1, new Task(2, crnCommand))) {
			News.error("106移库1号堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			}
			// else {
			// wrkMast.setCrnNo(2);
			// wrkMastMapper.updateById(wrkMast);
			// }
			News.infoNoLog("106移库给1号堆垛机下发完成");
			}

			public synchronized void writePlc305() {
			BasDevp basDevp = basDevpService.selectOne(new EntityWrapper<BasDevp>().eq("dev_no", 305));
			if (basDevp.getWrkNo() != 0 && basDevp.getWrkNo() != 9999) {
			WrkMast wrkMast = wrkMastService.selectById(basDevp.getWrkNo());
			if(wrkMast != null && wrkMast.getWhsType() != null && wrkMast.getWhsType() == 2) {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			StaProtocol staProtocol305 = devpThread.getStation().get(305);
			if (!staProtocol305.getOpenAskDoor() && !staProtocol305.getIfOpenDoor()) { // 没请求打开
			// 请求打开
			if(!MessageQueue.offer(SlaveType.Devp, 1, new Task(3, 1))){
			log.error("请求开门失败");
			}
			}
			}
			}
			}
			public synchronized void readPlc305() {
			WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("wrk_sts", 16L));

			}

			public synchronized void invokingBase() {
			WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("wrk_sts", 1L).eq("io_type", 1)
			.eq("source_sta_no", 305));
			if (wrkMast != null) {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			StaProtocol staProtocol= devpThread.getStation().get(wrkMast.getStaNo());
			public synchronized void canningLineTaskFinish() {
			// 输送线plc编号
			Integer devpPlcId = 1;
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, devpPlcId);
			for (Integer site : canningLineRgvConnectionSiteList) {
			StaProtocol staProtocol = devpThread.getStation().get(site);
			if (staProtocol == null) {
			return;
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			if(staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.getWorkNo() == 0) {
			staProtocol.setWorkNo(wrkMast.getWrkNo());
			staProtocol.setStaNo(wrkMast.getSourceStaNo().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp,1, new Task(2, staProtocol));
			log.info("入库请求底座------");
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.getWorkNo() != 0) {
			// 查询工作档
			WrkMast wrkMast = wrkMastMapper.selectByWrkNo(staProtocol.getWorkNo());
			if (wrkMast.getIoType() != 1) {
			try {
			CanningLineInLocParam param = new CanningLineInLocParam();
			param.setWrkNo(wrkMast.getWrkNo());
			param.setSourceStaNo(site);

			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/CanningLine/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			log.info("罐装线入库请求wms原始返回：" + response);
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);
			staProtocol.setWorkNo(dto.getWorkNo());
			staProtocol.setStaNo(RouteUtils.SouStaEnd(dto.getStaNo(), dto.getSourceStaNo()));
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			// 这里下发命令后，输送线要把该站点可入信号去除
			boolean result = MessageQueue.offer(SlaveType.Devp, devpPlcId, new Task(2, staProtocol));
			if (result) {
			log.info("罐装线入库推送输送线命令成功：" + dto.getWorkNo() + "," + site + "," + dto.getStaNo());
			News.info("罐装线入库推送输送线命令成功：" + dto.getWorkNo() + "," + site + "," + dto.getStaNo());
			} else {
			log.error("罐装线入库推送输送线命令失败：" + dto.getWorkNo() + "," + site + "," + dto.getStaNo());
			News.error("罐装线入库推送输送线命令失败：" + dto.getWorkNo() + "," + site + "," + dto.getStaNo());
			throw new CoolException("罐装线入库推送输送线命令失败:" + site);
			}
			} else {
			log.error("罐装线入库请求接口异常，url:{}，request:{},response:{}", wmsUrl + "/rpc/pakin/CanningLine/loc/v1", JSON.toJSONString(param), response);
			News.error("罐装线入库请求接口异常！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/CanningLine/loc/v1", JSON.toJSONString(param), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			}
			}
			}