#

yxFwq

2024-07-20 e95cc36944a886ccf63f90ccdf883aaf6ab81f90

 src/main/java/com/zy/core/thread/SiemensCrnThread.java

@@ -5,6 +5,7 @@
import HslCommunication.Profinet.Siemens.SiemensPLCS;
import HslCommunication.Profinet.Siemens.SiemensS7Net;
import com.alibaba.fastjson.JSON;
import com.core.common.Cools;
import com.core.common.DateUtils;
import com.core.common.SpringUtils;
import com.zy.asrs.entity.BasCrnOpt;
@@ -18,6 +19,7 @@
import com.zy.core.model.CrnSlave;
import com.zy.core.model.Task;
import com.zy.core.model.command.CrnCommand;
import com.zy.core.model.cpmmandParam.CrnCommandParam;
import com.zy.core.model.protocol.CrnProtocol;
import lombok.Data;
import lombok.extern.slf4j.Slf4j;
@@ -37,6 +39,17 @@
    private CrnSlave slave;
    private CrnProtocol crnProtocol;
    private boolean resetFlag = false;
    private boolean resetFlagTwo = false;

    public Long sign = System.currentTimeMillis();

    public boolean isRunning = true;

    /**
     * 堆垛机是否在回原点运动中标记
     */
    private boolean backHpFlag = false;
    private boolean backHpFlagTwo = false;

    public SiemensCrnThread(CrnSlave slave) {
        this.slave = slave;
@@ -46,7 +59,8 @@
    @SuppressWarnings("InfiniteLoopStatement")
    public void run() {
        this.connect();
        while (true) {
        sign = System.currentTimeMillis();
        while (isRunning) {
            try {
                int step = 1;
                Task task = MessageQueue.poll(SlaveType.Crn, slave.getId());
@@ -80,6 +94,32 @@
                        command.setDestinationPosZ((short)0);     // 目标库位层
                        write(command);
                        break;
                    // 写入数据
                    case 5:
                        write5((CrnCommand) task.getData());
                        break;
                    // 复位
                    case 6:
                        CrnCommand command2 = (CrnCommand) task.getData();
                        if (null == command2) {
                            command2 = new CrnCommand();
                        }
                        command2.setCrnNo(slave.getId()); // 堆垛机编号
                        command2.setTaskNo((short) 0); // 工作号
                        command2.setAckFinish((short) 1);  // 任务完成确认位
                        command2.setTaskMode(CrnTaskModeType.NONE); // 任务模式
                        command2.setSourcePosX((short)0);     // 源库位排
                        command2.setSourcePosY((short)0);     // 源库位列
                        command2.setSourcePosZ((short)0);     // 源库位层
                        command2.setDestinationPosX((short)0);     // 目标库位排
                        command2.setDestinationPosY((short)0);     // 目标库位列
                        command2.setDestinationPosZ((short)0);     // 目标库位层
                        write5(command2);
                        break;
                    // 双工位同时作业
                    case 9:
                        write9((CrnCommandParam) task.getData());
                        break;
                    default:
                        break;
                }
@@ -87,7 +127,45 @@
            } catch (Exception e) {
//                e.printStackTrace();
            }
//            System.out.println("第"+slave.getId()+"个堆垛机线程运行一轮："+(System.currentTimeMillis()-sign));
            sign = System.currentTimeMillis();
        }
    }

    /**
     * 初始化堆垛机状态
     */
    private void initCrn() {
        if (null == crnProtocol) {
            crnProtocol = new CrnProtocol();
        }
        crnProtocol.setMode((short) -1);
//        crnProtocol.setTaskNo((short)0);
        crnProtocol.setStatus((short)-1);
        crnProtocol.setStatusTwo((short)-1);
        crnProtocol.setBay((short)0);
        crnProtocol.setLevel((short)0);
        crnProtocol.setForkPos((short) -1);
        crnProtocol.setLiftPos((short) -1);
        crnProtocol.setWalkPos((short)0);
        crnProtocol.setLoaded((short)0);
        crnProtocol.setAlarm((short)0);
        crnProtocol.setxSpeed((short) 0);
        crnProtocol.setySpeed((short) 0);
        crnProtocol.setzSpeed((short) 0);
        crnProtocol.setxDistance((short) 0);
        crnProtocol.setyDistance((short) 0);
        crnProtocol.setxDuration((short) 0);
        crnProtocol.setyDuration((short) 0);

        // 根据实时信息更新数据库
        BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
        BasCrnp basCrnp = basCrnpService.selectById(slave.getId());
        basCrnp.setCrnSts((int)crnProtocol.getMode());
        basCrnp.setCrnStatusOne(-1);
        basCrnp.setCrnStatusTwo(-1);
        if (!basCrnpService.updateById(basCrnp)){
            log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
        }
    }

@@ -105,8 +183,9 @@
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】堆垛机plc连接失败！！！ ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("堆垛机plc连接失败！！！ ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            initCrn();
        }
        siemensNet.ConnectClose();
//        siemensNet.ConnectClose();
        return result;
    }

@@ -114,195 +193,588 @@
     * 读取状态
     */
    private void readStatus(){
        OperateResultExOne<byte[]> result = siemensNet.Read("DB11.2", (short) 104);
        if (result.IsSuccess) {
            if (null == crnProtocol) {
                crnProtocol = new CrnProtocol();
        try {
            OperateResultExOne<byte[]> result = new OperateResultExOne<byte[]>();
            if (slave.getId()>2 && slave.getId()<6){
                result = siemensNet.Read("DB101.0", (short) 66);
            } else {
                result = siemensNet.Read("DB101.0", (short) 56);
            }
            crnProtocol.setMode(siemensNet.getByteTransform().TransInt16(result.Content, 0));   // 2
            crnProtocol.setStatus(siemensNet.getByteTransform().TransInt16(result.Content, 2)); // 4
            crnProtocol.setTaskNo(siemensNet.getByteTransform().TransInt16(result.Content, 4)); // 6
            crnProtocol.setTaskFinish(siemensNet.getByteTransform().TransInt16(result.Content, 6)); // 8
            crnProtocol.setValid(siemensNet.getByteTransform().TransInt16(result.Content, 8));  // 10
            if (result.IsSuccess) {
                if (null == crnProtocol) {
                    crnProtocol = new CrnProtocol();
                    crnProtocol.setCrnNo(slave.getId());
                }
                crnProtocol.setMode(siemensNet.getByteTransform().TransInt16(result.Content, 0));
                crnProtocol.setTaskNo(siemensNet.getByteTransform().TransInt16(result.Content, 2));
                crnProtocol.setStatus(siemensNet.getByteTransform().TransInt16(result.Content, 4));
                crnProtocol.setBay(siemensNet.getByteTransform().TransInt16(result.Content, 6));
                crnProtocol.setLevel(siemensNet.getByteTransform().TransInt16(result.Content, 8));
                crnProtocol.setForkPos(siemensNet.getByteTransform().TransInt16(result.Content, 10));

            crnProtocol.setLevel(siemensNet.getByteTransform().TransInt16(result.Content, 14)); // 16
            crnProtocol.setBay(siemensNet.getByteTransform().TransInt16(result.Content, 16));   // 18
            crnProtocol.setRow(siemensNet.getByteTransform().TransInt16(result.Content, 18));   // 20
            crnProtocol.setLane(siemensNet.getByteTransform().TransInt16(result.Content, 20));  // 22
                if (slave.getId()<3 || slave.getId()>5){
                    crnProtocol.setLiftPos(siemensNet.getByteTransform().TransInt16(result.Content, 12));
                    crnProtocol.setWalkPos(siemensNet.getByteTransform().TransInt16(result.Content, 14));
                    crnProtocol.setLoaded(siemensNet.getByteTransform().TransInt16(result.Content, 16));
                    crnProtocol.setAlarm(siemensNet.getByteTransform().TransInt16(result.Content, 18));
                    crnProtocol.setTemp1(siemensNet.getByteTransform().TransInt16(result.Content, 20));
                    crnProtocol.setTemp2(siemensNet.getByteTransform().TransInt16(result.Content, 22));
                    crnProtocol.setTemp3(siemensNet.getByteTransform().TransInt16(result.Content, 24));
                    crnProtocol.setTemp4(siemensNet.getByteTransform().TransInt16(result.Content, 26));
                    crnProtocol.setxSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 28));
                    crnProtocol.setySpeed(siemensNet.getByteTransform().TransInt16(result.Content, 32));
                    crnProtocol.setzSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 36));
                    crnProtocol.setxDistance(siemensNet.getByteTransform().TransInt16(result.Content, 40));
                    crnProtocol.setyDistance(siemensNet.getByteTransform().TransInt16(result.Content, 44));
                    crnProtocol.setxDuration(siemensNet.getByteTransform().TransInt16(result.Content, 48));
                    crnProtocol.setyDuration(siemensNet.getByteTransform().TransInt16(result.Content, 52));
                } else {
                    crnProtocol.setLoaded(siemensNet.getByteTransform().TransInt16(result.Content, 12));

            crnProtocol.setAlarm1(siemensNet.getByteTransform().TransInt32(result.Content, 28));    // 30
            crnProtocol.setAlarm2(siemensNet.getByteTransform().TransInt32(result.Content, 32));    // 34
            crnProtocol.setAlarm3(siemensNet.getByteTransform().TransInt32(result.Content, 36));    // 38
            crnProtocol.setAlarm4(siemensNet.getByteTransform().TransInt32(result.Content, 40));    // 42
                    crnProtocol.setTaskNoTwo(siemensNet.getByteTransform().TransInt16(result.Content, 14));
                    crnProtocol.setStatusTwo(siemensNet.getByteTransform().TransInt16(result.Content, 16));
                    crnProtocol.setBayTwo(siemensNet.getByteTransform().TransInt16(result.Content, 18));
                    crnProtocol.setLevelTwo(siemensNet.getByteTransform().TransInt16(result.Content, 20));
                    crnProtocol.setForkPosTwo(siemensNet.getByteTransform().TransInt16(result.Content, 22));
                    crnProtocol.setLoadedTwo(siemensNet.getByteTransform().TransInt16(result.Content, 24));

            boolean[] bool1 = siemensNet.getByteTransform().TransBool(result.Content, 60, 1);    // 62
            crnProtocol.setConnStatus(bool1[0]);
            crnProtocol.setCorrection(bool1[3]);
            crnProtocol.setTuError(bool1[4]);
            crnProtocol.setNoneError(bool1[5]);
            crnProtocol.setStockError(bool1[6]);
            crnProtocol.setJobInvalid(bool1[7]);
            boolean[] bool2 = siemensNet.getByteTransform().TransBool(result.Content, 61, 1);    // 63
            crnProtocol.setIdle(bool2[0]);
            crnProtocol.setControl(bool2[1]);
            crnProtocol.setStopQuasi(bool2[2]);
            crnProtocol.setRunning(bool2[3]);
            crnProtocol.setFault(bool2[4]);
            crnProtocol.setForkHome(bool2[5]);
            crnProtocol.setForkSingleLeft(bool2[6]);
            crnProtocol.setForkSingleRight(bool2[7]);
            boolean[] bool3 = siemensNet.getByteTransform().TransBool(result.Content, 62, 1);    // 64
            crnProtocol.setForkDoubleLeft(bool3[0]);
            crnProtocol.setForkDoubleRight(bool3[1]);
            crnProtocol.setSingleHigh(bool3[2]);
            crnProtocol.setSingleLow(bool3[3]);
            crnProtocol.setDoubleHigh(bool3[4]);
            crnProtocol.setDoubleLow(bool3[5]);
            crnProtocol.setPlatformHigh(bool3[6]);
            crnProtocol.setPlatformLow(bool3[7]);
            boolean[] bool4 = siemensNet.getByteTransform().TransBool(result.Content, 64, 1);    // 66
            crnProtocol.setLoaded((short) (bool4[4]?1:0));  // 有物
                    crnProtocol.setWalkPos(siemensNet.getByteTransform().TransInt16(result.Content, 26));
                    crnProtocol.setWalkPosTwo(siemensNet.getByteTransform().TransInt16(result.Content, 28));

            // 速度
            crnProtocol.setXSpeed((float) siemensNet.getByteTransform().TransInt16(result.Content, 22));    // 24
            crnProtocol.setYSpeed((float) siemensNet.getByteTransform().TransInt16(result.Content, 24));    // 26
            crnProtocol.setZSpeed((float) siemensNet.getByteTransform().TransInt16(result.Content, 26));    // 28
            // 累计里程、时长
            crnProtocol.setXDuration((float) siemensNet.getByteTransform().TransInt32(result.Content, 88));    // 90
            crnProtocol.setYDistance((float) siemensNet.getByteTransform().TransInt32(result.Content, 92));    // 94
            crnProtocol.setXDuration((float) siemensNet.getByteTransform().TransInt32(result.Content, 96));    // 98
            crnProtocol.setYDuration((float) siemensNet.getByteTransform().TransInt32(result.Content, 100));    // 102
                    crnProtocol.setLiftPos(siemensNet.getByteTransform().TransInt16(result.Content, 30));
                    crnProtocol.setAlarm(siemensNet.getByteTransform().TransInt16(result.Content, 32));

            // 增强
            if (crnProtocol.getForkHome()) {
                crnProtocol.setForkPos(CrnForkPosType.HOME);
            }
            if (crnProtocol.getForkSingleLeft()) {
                crnProtocol.setForkPos(CrnForkPosType.LEFT);
            }
            if (crnProtocol.getForkSingleRight()) {
                crnProtocol.setForkPos(CrnForkPosType.RIGHT);
            }
            if (crnProtocol.getForkDoubleLeft()) {
                crnProtocol.setForkPos(CrnForkPosType._LEFT);
            }
            if (crnProtocol.getForkDoubleRight()) {
                crnProtocol.setForkPos(CrnForkPosType._RIGHT);
            }
            if (crnProtocol.getSingleHigh()) {
                crnProtocol.setLiftPos(CrnLiftPosType.UP);
            }
            if (crnProtocol.getSingleLow()) {
                crnProtocol.setLiftPos(CrnLiftPosType.DOWN);
            }
            if (crnProtocol.getDoubleHigh()) {
                crnProtocol.setLiftPos(CrnLiftPosType._UP);
            }
            if (crnProtocol.getDoubleLow()) {
                crnProtocol.setLiftPos(CrnLiftPosType._DOWN);
            }
            if (crnProtocol.getIdle()) {
                crnProtocol.setStatus(CrnStatusType.IDLE);
            }
                    crnProtocol.setxSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 34));
                    crnProtocol.setySpeed(siemensNet.getByteTransform().TransInt16(result.Content, 38));
                    crnProtocol.setzSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 42));
//                    crnProtocol.setzSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 42));

            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功",DateUtils.convert(new Date()), slave.getId()));
                    crnProtocol.setxDistance(siemensNet.getByteTransform().TransInt16(result.Content, 50));
                    crnProtocol.setyDistance(siemensNet.getByteTransform().TransInt16(result.Content, 54));
                    crnProtocol.setxDuration(siemensNet.getByteTransform().TransInt16(result.Content, 58));
                    crnProtocol.setyDuration(siemensNet.getByteTransform().TransInt16(result.Content, 62));
                }

            // 复位信号
            if (crnProtocol.getTaskFinish() == 1) {
                if (resetFlag) {
                    CrnCommand crnCommand = new CrnCommand();
                    crnCommand.setAckFinish((short)1);
                    if (write(crnCommand)) {
                        resetFlag = false;
                OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功",DateUtils.convert(new Date()), slave.getId()));

                // 复位信号
                if (!Cools.isEmpty(crnProtocol.getStatusType()) && (crnProtocol.getStatusType().equals(CrnStatusType.WAITING) || crnProtocol.getStatusType().equals(CrnStatusType.SEPARATE_WAITING))) {
                    log.error("-------------------------工位1-------------------------第一步、[堆垛机号：{}, 工作号：{}, 载货台:{}]==>> 状态为{}，等待确认！！",
                            slave.getId(),crnProtocol.getTaskNo(), crnProtocol.getLoaded()==1 ? "有物" : "无物",crnProtocol.getStatusType());
                    if (resetFlag) {
                        if(crnProtocol.getTaskNo()==9999){
                            backHpFlag = false;
                        }
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setAckFinish((short)1);
                        if (write(crnCommand)) {
                            resetFlag = false;
                        }
                    }

                }

                // 复位信号
                if (!Cools.isEmpty(crnProtocol.getStatusTypeTwo()) && (crnProtocol.getStatusTypeTwo().equals(CrnStatusType.WAITING) || crnProtocol.getStatusTypeTwo().equals(CrnStatusType.SEPARATE_WAITING))) {
                    log.error("-------------------------工位2-------------------------第一步、[堆垛机号：{}, 工作号：{}, 载货台:{}]==>> 状态为{}，等待确认！！",
                            slave.getId(),crnProtocol.getTaskNoTwo(), crnProtocol.getLoadedTwo()==1 ? "有物" : "无物",crnProtocol.getStatusTypeTwo());
                    if (resetFlagTwo) {
                        if(crnProtocol.getTaskNoTwo()==9999){
                            backHpFlagTwo = false;
                        }
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setAckFinish((short)1);
                        if (write5(crnCommand)) {
                            resetFlagTwo = false;
                        }
                    }
                }

                try {
                    // 根据实时信息更新数据库
                    BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
                    BasCrnp basCrnp = new BasCrnp();
                    basCrnp.setCrnNo(slave.getId());
                    basCrnp.setCrnSts((int)crnProtocol.getMode());
                    if (!basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                        log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
                    }
                } catch (Exception ignore){}

            } else {
                initCrn();
                OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
                log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            }
        } catch (Exception e) {
            e.printStackTrace();
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            initCrn();
        }
    }

            try {
                // 根据实时信息更新数据库
                BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
                BasCrnp basCrnp = new BasCrnp();
                basCrnp.setCrnNo(slave.getId());
                if (!basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                    log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
                }
            } catch (Exception ignore){}

        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
    private void convertRow(CrnCommand crnCommand) {
        if (crnCommand.getSourcePosX() != null && crnCommand.getSourcePosX() != 0) {
            crnCommand.setSourcePosX((short) (crnCommand.getSourcePosX() - ((slave.getId() - 1) * 4)));
        }
        if (crnCommand.getDestinationPosX() != null && crnCommand.getDestinationPosX() != 0) {
            crnCommand.setDestinationPosX((short) (crnCommand.getDestinationPosX() - ((slave.getId() - 1) * 4)));
        }
    }

    /**
     * 写入数据
     */
    private boolean write(CrnCommand command){
    private boolean write(CrnCommand command) throws InterruptedException {
        if (null == command) {
            log.error("堆垛机写入命令为空");
            return false;
        }
        if (command.getTaskNo() == 0) {
            command.setTaskNo((short) 9999);
        }
//        convertRow(command);
        command.setCrnNo(slave.getId());
        short[] array = new short[9];
        if (!command.getTaskModeType().equals(CrnTaskModeType.CLEAR)) {
            array[0] = 5;
        } else {
            array[0] = 7;
        }
        array[1] = command.getSourcePosZ();
        array[2] = command.getSourcePosY();
        short[] array = new short[10];
        array[0] = command.getAckFinish();
        array[1] = command.getTaskNo();
        array[2] = command.getTaskMode();
        array[3] = command.getSourcePosX();
        array[4] = command.getDestinationPosZ();
        array[5] = command.getDestinationPosY();
        array[4] = command.getSourcePosY();
        array[5] = command.getSourcePosZ();
        array[6] = command.getDestinationPosX();
        array[7] = command.getSourceStaNo();
        array[8] = command.getDestinationStaNo();
        // 作业信息
        OperateResult result = siemensNet.Write("DB1000.0", array);
        // 任务号
        OperateResult result1 = siemensNet.Write("DB1000.24", command.getTaskNo());
        // 结束位
        OperateResult result2 = siemensNet.Write("DB1000.28.1", true);
        // 日志记录
        try {
            if (command.getAckFinish() != 1) {
                BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
                BasCrnOpt basCrnOpt = new BasCrnOpt(
                        command.getTaskNo().intValue(),    // 任务号
                        command.getCrnNo(),    // 堆垛机[非空]
                        new Date(),    // 下发时间
                        command.getTaskModeType().toString(),    // 模式
                        command.getSourcePosX().intValue(),    // 源排
                        command.getSourcePosY().intValue(),    // 源列
                        command.getSourcePosZ().intValue(),    // 源层
                        null,    // 源站
                        command.getDestinationPosX().intValue(),    // 目标排
                        command.getDestinationPosY().intValue(),    // 目标列
                        command.getDestinationPosZ().intValue(),    // 目标层
                        null,    // 目标站
                        null,    // 响应结果
                        null,    // 修改时间
                        null    // 修改人员
                );
                bean.insert(basCrnOpt);
        array[7] = command.getDestinationPosY();
        array[8] = command.getDestinationPosZ();
//        array[9] = command.getSourceStaNo();
//        array[10] = command.getDestinationStaNo();
        array[9] = command.getCommand();
        OperateResult result18 = siemensNet.Write("DB100.18", (short)0);
        OperateResult result = siemensNet.Write("DB100.0", array);
        log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), array);



        //堆垛机任务写入后，回读一次，看是否成功
        Thread.sleep(200);
        int writeCount = 1;
        do {
            try{
                if(!result.IsSuccess){
                    log.error("写入堆垛机plc数据失败，重新下发任务  写入直接失败 ===>> [id:{}],{},[写入次数:{}]", slave.getId(), JSON.toJSONString(command),writeCount);
                    result = siemensNet.Write("DB100.0", array);
                    Thread.sleep(100);
                    writeCount++;
                    continue;
                }
                OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.0", (short) 24);
                if (resultRead.IsSuccess) {
                    CrnCommand one = new CrnCommand();
                    one.setTaskNo(siemensNet.getByteTransform().TransInt16(resultRead.Content, 2));
                    one.setTaskMode(siemensNet.getByteTransform().TransInt16(resultRead.Content, 4));
                    one.setSourcePosX(siemensNet.getByteTransform().TransInt16(resultRead.Content, 6));
                    one.setSourcePosY(siemensNet.getByteTransform().TransInt16(resultRead.Content, 8));
                    one.setSourcePosZ(siemensNet.getByteTransform().TransInt16(resultRead.Content, 10));
                    one.setDestinationPosX(siemensNet.getByteTransform().TransInt16(resultRead.Content, 12));
                    one.setDestinationPosY(siemensNet.getByteTransform().TransInt16(resultRead.Content, 14));
                    one.setDestinationPosZ(siemensNet.getByteTransform().TransInt16(resultRead.Content, 16));
                    if (!command.getTaskNo().equals(one.getTaskNo()) || !command.getTaskMode().equals(one.getTaskMode())
                            || !command.getSourcePosX().equals(one.getSourcePosX()) || !command.getSourcePosY().equals(one.getSourcePosY())
                            || !command.getSourcePosZ().equals(one.getSourcePosZ()) || !command.getDestinationPosX().equals(one.getDestinationPosX())
                            || !command.getDestinationPosY().equals(one.getDestinationPosY()) || !command.getDestinationPosZ().equals(one.getDestinationPosZ())
                    ){
                        try{
                            log.error("堆垛机命令地址写入后回读失败==>不一致[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSONString(command),JSON.toJSONString(one));
                        }catch (Exception e){
                            try{
                                log.error("日志打印失败：===>>参数one报错 [id:{}],{}", slave.getId(), JSON.toJSONString(command),JSON.toJSONString(resultRead));
                            }catch (Exception e1){
                                log.error("日志打印失败：===>> [id:{}],{}", slave.getId(), JSON.toJSONString(command));
                            }
                        }
                        try{
                            Thread.sleep(100);
                        }catch (Exception e){

                        }
                        log.error("写入堆垛机plc数据失败，重新下发任务  回读不一致 ===>> [id:{}],{},[写入次数:{}]", slave.getId(), JSON.toJSONString(command),writeCount);
                        result = siemensNet.Write("DB100.0", array);
                        writeCount++;
                        continue;
                    } else {
                        log.info("堆垛机命令地址写入后回读成功[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSONString(command),JSON.toJSONString(one));
                        break;
                    }
                }
            }catch (Exception e){
                log.error("堆垛机命令地址写入后回读出错,异常："+e);
            }
            writeCount++;
        } while (writeCount<6);

        if (command.getAckFinish() == 0) {
            short commandFinish = 1;
            Thread.sleep(100L);
            result = siemensNet.Write("DB100.18", commandFinish);
            int signFinish = 1;
            while (signFinish<5){
                OperateResultExOne<byte[]> result10018 = siemensNet.Read("DB100.18", (short) 2);
                short transInt16 = siemensNet.getByteTransform().TransInt16(result10018.Content, 0);
                if (transInt16 != commandFinish){
                    log.info("下发DB100.18  回读失败" + "commandFinish:"+commandFinish);
                    log.info("下发DB100.18  回读失败" + "array:"+ JSON.toJSONString(array));
                    result = siemensNet.Write("DB100.18", commandFinish);
                    signFinish++;
                }else {
                    log.info("下发DB100.18" + "commandFinish:"+commandFinish);
                    log.info("下发DB100.18" + "array:"+ JSON.toJSONString(array));
                    break;
                }
            }
        }

        try {
            // 日志记录
            BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
            BasCrnOpt basCrnOpt = new BasCrnOpt(
                    command.getTaskNo().intValue(),    // 任务号
                    command.getCrnNo(),    // 堆垛机[非空]
                    new Date(),    // 下发时间
                    command.getTaskModeType().toString(),    // 模式
                    command.getSourcePosX().intValue(),    // 源排
                    command.getSourcePosY().intValue(),    // 源列
                    command.getSourcePosZ().intValue(),    // 源层
                    null,    // 源站
                    command.getDestinationPosX().intValue(),    // 目标排
                    command.getDestinationPosY().intValue(),    // 目标列
                    command.getDestinationPosZ().intValue(),    // 目标层
                    null,    // 目标站
                    null,    // 响应结果
                    null,    // 修改时间
                    null    // 修改人员
            );
            bean.insert(basCrnOpt);
        } catch (Exception ignore) {}

        if (result.IsSuccess && result1.IsSuccess && result2.IsSuccess) {
        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSONString(command));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSONString(command)));
            return true;
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }

    /**
     * 写入数据  工位2
     */
    private boolean write5(CrnCommand command) throws InterruptedException {
        if (null == command) {
            log.error("堆垛机写入命令为空");
            return false;
        }
//        convertRow(command);
        command.setCrnNo(slave.getId());
        short[] array = new short[10];
        array[0] = command.getAckFinish();
        array[1] = command.getTaskNo();
        array[2] = command.getTaskMode();
        array[3] = command.getSourcePosX();
        array[4] = command.getSourcePosY();
        array[5] = command.getSourcePosZ();
        array[6] = command.getDestinationPosX();
        array[7] = command.getDestinationPosY();
        array[8] = command.getDestinationPosZ();
//        array[9] = command.getSourceStaNo();
//        array[10] = command.getDestinationStaNo();
        array[9] = command.getCommand();
        OperateResult result18 = siemensNet.Write("DB100.38", (short)0);
        OperateResult result = siemensNet.Write("DB100.20", array);
        log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), array);

        //堆垛机任务写入后，回读一次，看是否成功
        Thread.sleep(200);
        int writeCount = 1;
        do {
            try{
                if(!result.IsSuccess){
                    log.error("写入堆垛机plc数据失败，重新下发任务  写入直接失败 ===>> [id:{}],{},[写入次数:{}]", slave.getId(), JSON.toJSONString(command),writeCount);
                    result = siemensNet.Write("DB100.20", array);
                    Thread.sleep(100);
                    writeCount++;
                    continue;
                }
                OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.20", (short) 24);
                if (resultRead.IsSuccess) {
                    CrnCommand one = new CrnCommand();
                    one.setTaskNo(siemensNet.getByteTransform().TransInt16(resultRead.Content, 2));
                    one.setTaskMode(siemensNet.getByteTransform().TransInt16(resultRead.Content, 4));
                    one.setSourcePosX(siemensNet.getByteTransform().TransInt16(resultRead.Content, 6));
                    one.setSourcePosY(siemensNet.getByteTransform().TransInt16(resultRead.Content, 8));
                    one.setSourcePosZ(siemensNet.getByteTransform().TransInt16(resultRead.Content, 10));
                    one.setDestinationPosX(siemensNet.getByteTransform().TransInt16(resultRead.Content, 12));
                    one.setDestinationPosY(siemensNet.getByteTransform().TransInt16(resultRead.Content, 14));
                    one.setDestinationPosZ(siemensNet.getByteTransform().TransInt16(resultRead.Content, 16));
                    if (!command.getTaskNo().equals(one.getTaskNo()) || !command.getTaskMode().equals(one.getTaskMode())
                            || !command.getSourcePosX().equals(one.getSourcePosX()) || !command.getSourcePosY().equals(one.getSourcePosY())
                            || !command.getSourcePosZ().equals(one.getSourcePosZ()) || !command.getDestinationPosX().equals(one.getDestinationPosX())
                            || !command.getDestinationPosY().equals(one.getDestinationPosY()) || !command.getDestinationPosZ().equals(one.getDestinationPosZ())
                    ){
                        try{
                            log.error("堆垛机命令地址写入后回读失败==>不一致[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSONString(command),JSON.toJSONString(one));
                        }catch (Exception e){
                            try{
                                log.error("日志打印失败：===>>参数one报错 [id:{}],{}", slave.getId(), JSON.toJSONString(command),JSON.toJSONString(resultRead));
                            }catch (Exception e1){
                                log.error("日志打印失败：===>> [id:{}],{}", slave.getId(), JSON.toJSONString(command));
                            }
                        }
                        try{
                            Thread.sleep(100);
                        }catch (Exception e){

                        }
                        log.error("写入堆垛机plc数据失败，重新下发任务  回读不一致 ===>> [id:{}],{},[写入次数:{}]", slave.getId(), JSON.toJSONString(command),writeCount);
                        result = siemensNet.Write("DB100.20", array);
                        writeCount++;
                        continue;
                    } else {
                        log.info("堆垛机命令地址写入后回读成功[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSONString(command),JSON.toJSONString(one));
                        break;
                    }
                }
            }catch (Exception e){
                log.error("堆垛机命令地址写入后回读出错,异常："+e);
            }
            writeCount++;
        } while (writeCount<6);

        if (command.getAckFinish() == 0) {
            short commandFinish = 1;
            Thread.sleep(100L);
            result = siemensNet.Write("DB100.38", commandFinish);
            int signFinish = 1;
            while (signFinish<5){
                OperateResultExOne<byte[]> result10018 = siemensNet.Read("DB100.38", (short) 2);
                short transInt16 = siemensNet.getByteTransform().TransInt16(result10018.Content, 0);
                if (transInt16 != commandFinish){
                    log.info("下发DB100.38  回读失败" + "commandFinish:"+commandFinish);
                    log.info("下发DB100.38  回读失败" + "array:"+ JSON.toJSONString(array));
                    result = siemensNet.Write("DB100.38", commandFinish);
                    signFinish++;
                }else {
                    log.info("下发DB100.38" + "commandFinish:"+commandFinish);
                    log.info("下发DB100.38" + "array:"+ JSON.toJSONString(array));
                    break;
                }
            }
        }

        try {
            // 日志记录
            BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
            BasCrnOpt basCrnOpt = new BasCrnOpt(
                    command.getTaskNo().intValue(),    // 任务号
                    command.getCrnNo(),    // 堆垛机[非空]
                    new Date(),    // 下发时间
                    command.getTaskModeType().toString(),    // 模式
                    command.getSourcePosX().intValue(),    // 源排
                    command.getSourcePosY().intValue(),    // 源列
                    command.getSourcePosZ().intValue(),    // 源层
                    null,    // 源站
                    command.getDestinationPosX().intValue(),    // 目标排
                    command.getDestinationPosY().intValue(),    // 目标列
                    command.getDestinationPosZ().intValue(),    // 目标层
                    null,    // 目标站
                    null,    // 响应结果
                    null,    // 修改时间
                    null    // 修改人员
            );
            bean.insert(basCrnOpt);
        } catch (Exception ignore) {}

        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSONString(command));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSONString(command)));
            return true;
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }

    /**
     * 写入数据  双工位
     */
    private boolean write9(CrnCommandParam command) throws InterruptedException {
        if (null == command) {
            log.error("堆垛机写入命令为空");
            return false;
        }
        command.setCrnNo(slave.getId());
        short[] array = new short[22];
        array[0] = command.getAckFinish();
        array[1] = command.getTaskNo();
        array[2] = command.getTaskMode();
        array[3] = command.getSourcePosX();
        array[4] = command.getSourcePosY();
        array[5] = command.getSourcePosZ();
        array[6] = command.getDestinationPosX();
        array[7] = command.getDestinationPosY();
        array[8] = command.getDestinationPosZ();
        array[9] = command.getCommand();
        array[10] = command.getAckFinish2();
        array[11] = command.getTaskNo2();
        array[12] = command.getTaskMode2();
        array[13] = command.getSourcePosX2();
        array[14] = command.getSourcePosY2();
        array[15] = command.getSourcePosZ2();
        array[16] = command.getDestinationPosX2();
        array[17] = command.getDestinationPosY2();
        array[18] = command.getDestinationPosZ2();
        array[19] = command.getCommand();
        array[20] = (short)1;
        array[21] = (short)1;
        OperateResult result18 = siemensNet.Write("DB100.18", (short)0);
        OperateResult result38 = siemensNet.Write("DB100.38", (short)0);
        OperateResult result = siemensNet.Write("DB100.0", array);
//        OperateResult result = siemensNet.Write("DB100.20", array);
        log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), array);

        //堆垛机任务写入后，回读一次，看是否成功
        Thread.sleep(200);
        int writeCount = 1;
        do {
            try{
                if(!result.IsSuccess){
                    log.error("写入堆垛机plc数据失败，重新下发任务  写入直接失败 ===>> [id:{}],{},[写入次数:{}]", slave.getId(), JSON.toJSON(command),writeCount);
                    result = siemensNet.Write("DB100.0", array);
                    Thread.sleep(100);
                    writeCount++;
                    continue;
                }
                OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.0", (short) 40);
                if (resultRead.IsSuccess) {
                    CrnCommandParam one = new CrnCommandParam();
                    one.setTaskNo(siemensNet.getByteTransform().TransInt16(resultRead.Content, 2));
                    one.setTaskMode(siemensNet.getByteTransform().TransInt16(resultRead.Content, 4));
                    one.setSourcePosX(siemensNet.getByteTransform().TransInt16(resultRead.Content, 6));
                    one.setSourcePosY(siemensNet.getByteTransform().TransInt16(resultRead.Content, 8));
                    one.setSourcePosZ(siemensNet.getByteTransform().TransInt16(resultRead.Content, 10));
                    one.setDestinationPosX(siemensNet.getByteTransform().TransInt16(resultRead.Content, 12));
                    one.setDestinationPosY(siemensNet.getByteTransform().TransInt16(resultRead.Content, 14));
                    one.setDestinationPosZ(siemensNet.getByteTransform().TransInt16(resultRead.Content, 16));
                    one.setTaskNo2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 22));
                    one.setTaskMode2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 24));
                    one.setSourcePosX2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 26));
                    one.setSourcePosY2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 28));
                    one.setSourcePosZ2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 30));
                    one.setDestinationPosX2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 32));
                    one.setDestinationPosY2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 34));
                    one.setDestinationPosZ2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 36));
                    if (!command.getTaskNo().equals(one.getTaskNo()) || !command.getTaskMode().equals(one.getTaskMode())
                            || !command.getSourcePosX().equals(one.getSourcePosX()) || !command.getSourcePosY().equals(one.getSourcePosY())
                            || !command.getSourcePosZ().equals(one.getSourcePosZ()) || !command.getDestinationPosX().equals(one.getDestinationPosX())
                            || !command.getDestinationPosY().equals(one.getDestinationPosY()) || !command.getDestinationPosZ().equals(one.getDestinationPosZ())
                            ||
                            !command.getTaskNo2().equals(one.getTaskNo2()) || !command.getTaskMode2().equals(one.getTaskMode2())
                            || !command.getSourcePosX2().equals(one.getSourcePosX2()) || !command.getSourcePosY2().equals(one.getSourcePosY2())
                            || !command.getSourcePosZ2().equals(one.getSourcePosZ2()) || !command.getDestinationPosX2().equals(one.getDestinationPosX2())
                            || !command.getDestinationPosY2().equals(one.getDestinationPosY2()) || !command.getDestinationPosZ2().equals(one.getDestinationPosZ2())
                    ){
                        try{
                            log.error("堆垛机命令地址写入后回读失败==>不一致[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
                        }catch (Exception e){
                            try{
                                log.error("日志打印失败：===>>参数one报错 [id:{}],{}", slave.getId(), JSON.toJSON(command),JSON.toJSON(resultRead));
                            }catch (Exception e1){
                                log.error("日志打印失败：===>> [id:{}],{}", slave.getId(), JSON.toJSON(command));
                            }
                        }
                        try{
                            Thread.sleep(100);
                        }catch (Exception e){

                        }
                        log.error("写入堆垛机plc数据失败，重新下发任务  回读不一致 ===>> [id:{}],{},[写入次数:{}]", slave.getId(), JSON.toJSON(command),writeCount);
                        result = siemensNet.Write("DB100.0", array);
                        writeCount++;
                        continue;
                    } else {
                        log.info("堆垛机命令地址写入后回读成功[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
                        break;
                    }
                }
            }catch (Exception e){
                log.error("堆垛机命令地址写入后回读出错,异常："+e);
            }
            writeCount++;
        } while (writeCount<6);

        if (command.getAckFinish() == 0) {
            short commandFinish = 1;
            Thread.sleep(100L);
            result18 = siemensNet.Write("DB100.18", commandFinish);
            result38 = siemensNet.Write("DB100.38", commandFinish);
            int signFinish = 1;
            while (signFinish<5){
                OperateResultExOne<byte[]> result10018 = siemensNet.Read("DB100.18", (short) 2);
                OperateResultExOne<byte[]> result10038 = siemensNet.Read("DB100.38", (short) 2);
                short transInt1618 = siemensNet.getByteTransform().TransInt16(result10018.Content, 0);
                short transInt1638 = siemensNet.getByteTransform().TransInt16(result10038.Content, 0);
                if (transInt1618 != commandFinish || transInt1638 != commandFinish){
                    log.info("下发DB100.18/DB100.38  回读失败" + "commandFinish:"+commandFinish);
                    log.info("下发DB100.18/DB100.38  回读失败" + "array:"+ JSON.toJSONString(array));
                    result18 = siemensNet.Write("DB100.18", commandFinish);
                    result38 = siemensNet.Write("DB100.38", commandFinish);
                    signFinish++;
                }else {
                    log.info("下发DB100.18/DB100.38" + "commandFinish:"+commandFinish);
                    log.info("下发DB100.18/DB100.38" + "array:"+ JSON.toJSONString(array));
                    break;
                }
            }
        }

        try {
            // 日志记录
            BasCrnOptService bean = SpringUtils.getBean(BasCrnOptService.class);
            BasCrnOpt basCrnOpt = new BasCrnOpt(
                    command.getTaskNo().intValue(),    // 任务号
                    command.getCrnNo(),    // 堆垛机[非空]
                    new Date(),    // 下发时间
                    command.getTaskModeType().toString(),    // 模式
                    command.getSourcePosX().intValue(),    // 源排
                    command.getSourcePosY().intValue(),    // 源列
                    command.getSourcePosZ().intValue(),    // 源层
                    null,    // 源站
                    command.getDestinationPosX().intValue(),    // 目标排
                    command.getDestinationPosY().intValue(),    // 目标列
                    command.getDestinationPosZ().intValue(),    // 目标层
                    null,    // 目标站
                    null,    // 响应结果
                    null,    // 修改时间
                    null    // 修改人员
            );
            bean.insert(basCrnOpt);
        } catch (Exception ignore) {}

        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入堆垛机plc数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }


    @Override
    public void close() {
@@ -424,4 +896,9 @@

    }

    // 提供一个方法来停止线程
    public void requestStop() {
        isRunning = false;
    }

}