#

luxiaotao1123

2022-10-25 e8b1c6a2bda0d156fae26c4b365d2e3b90e10016

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -641,7 +641,7 @@
                    }
                }
                // 库位移转
//                this.locToLoc(crn, crnProtocol);
                this.locToLoc(crn, crnProtocol);
                // 演示任务
                this.steMoveDemo(crn, crnProtocol);
            }
@@ -695,18 +695,6 @@
            }

            // 检测是否存在出库任务
//            WrkMast pakoutWrkMast = wrkMastMapper.selectPakout(slave.getId(), null);
//            if (null != pakoutWrkMast) {
//                if ((pakoutWrkMast.getIoType() == 103 || pakoutWrkMast.getIoType() == 104 || pakoutWrkMast.getIoType() == 107)
//                        && pakoutWrkMast.getWrkSts() == 17
//                        && basDevpService.selectByWrkNo(pakoutWrkMast.getWrkNo()) != null
//                ) {
//
//                } else {
//                    log.error("{}入库任务无法作业，因存在出库中任务!", wrkMast.getWrkNo());
//                    continue;
//                }
//            }
            if (null != wrkMastMapper.selectPakout(slave.getId(), null)) {
                log.error("{}入库任务无法作业，因存在出库中任务!", wrkMast.getWrkNo());
                continue;
@@ -716,6 +704,7 @@
            wrkMast.setIoPri((double) 9999);
            wrkMastMapper.updateById(wrkMast);

            // 判断是否为穿梭库
            if (!locMastService.isShuttle(wrkMast.getLocNo())) {

                // 非穿梭库入库 【 堆垛机直接入库 】
@@ -734,17 +723,17 @@
                        switch (shallowLoc.getLocSts()) {
                            case "P":
                            case "R": {
                                WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                                if (null == waitWrkMast || (waitWrkMast.getIoType() == 101 && waitWrkMast.getWrkSts() >= 14L)) {
                                WrkMast waitWrkMast = wrkMastMapper.selectBySourceLocNo(shallowLocNo);
                                if (null == waitWrkMast) {
                                    log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
                                } else {
                                    waitWrkMast.setIoPri(15D);
                                    waitWrkMast.setModiTime(new Date());
                                    if (wrkMastMapper.updateById(waitWrkMast) == 0) {
                                        log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
                                    }
                                    //20220719 Add，如果浅库位状态为P/R，工作状态为14/15,说明浅库位已经空了，可以执行入库任务
                                    if (waitWrkMast.getWrkSts() < 14L) {
                                    if (waitWrkMast.getWrkSts() < 17) {
                                        waitWrkMast.setIoPri(20D);
                                        waitWrkMast.setModiTime(new Date());
                                        if (wrkMastMapper.updateById(waitWrkMast) == 0) {
                                            log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
                                        }
                                        //20220719 Add，如果浅库位状态为P/R，工作状态为14/15,说明浅库位已经空了，可以执行入库任务
                                        continue;
                                    }
                                }
@@ -755,15 +744,15 @@
                                // 此标记避免多次执行移库任务
                                if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())) {
                                    wrkMast.setUpdMk("Y");
                                    wrkMast.setIoPri(14D);
                                    wrkMast.setIoPri(20D);
                                    wrkMastMapper.updateById(wrkMast);
                                    // 生成工作档、改变浅库位的源库/目标库 库位状态、下发堆垛机命令（立马执行)
                                    moveLocForDeepLoc(slave, shallowLoc);
                                }
                                continue;
                            case "Q": {
                                WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                                if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
                                WrkMast waitWrkMast = wrkMastMapper.selectBySourceLocNo(shallowLocNo);
                                if (null != waitWrkMast && waitWrkMast.getWrkSts() == 9) {
                                    continue;
                                }
                                break;
@@ -799,7 +788,7 @@
                }
            } else {
                // 目标库位 ===>> 最外层库位
                if (locMastService.isOutMost(wrkMast.getLocNo())) {
                if (locMastService.isOutMost(wrkMast.getLocNo(), true)) {
                    // 判断小车是否在最外层库位，如果是则搬走，如果不是，则直接堆垛机入库
                    Integer steNo = this.hasCar(wrkMast.getLocNo());
                    // 有小车
@@ -891,7 +880,7 @@
                                crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
                                crnCommand.setSourcePosY(crnStn.getBay().shortValue());     // 源库位列
                                crnCommand.setSourcePosZ(crnStn.getLev().shortValue());     // 源库位层
                                crnCommand.setDestinationPosX(Utils.getGroupRow(locMast.getLocNo()).shortValue());     // 目标库位排
                                crnCommand.setDestinationPosX(Utils.getGroupRow(locMast.getLocNo(), true).shortValue());     // 目标库位排
                                crnCommand.setDestinationPosY(locMast.getBay1().shortValue());     // 目标库位列
                                crnCommand.setDestinationPosZ(locMast.getLev1().shortValue());     // 目标库位层
                                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
@@ -989,14 +978,49 @@
                wrkMast.setIoPri((double) 9999);
                wrkMastMapper.updateById(wrkMast);

                // 最外层库位，直接堆垛机出库
                if (locMastService.isOutMost(wrkMast.getSourceLocNo())) {
                // 判断是否为穿梭库
                if (!locMastService.isShuttle(wrkMast.getLocNo())) {

                    // 双深库位且浅库位有货，则需先对浅库位进行库位移转
                    if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
                        String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
                        LocMast shallowLoc = locMastService.selectById(shallowLocNo);
                        // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用 直接搬！
                        if (shallowLoc.getLocSts().equals("P") || shallowLoc.getLocSts().equals("R")) {
                            WrkMast waitWrkMast = wrkMastMapper.selectBySourceLocNo(shallowLocNo);
                            if (null == waitWrkMast) {
                                log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
                            } else {
                                if(waitWrkMast.getWrkSts() == 11) {
                                    waitWrkMast.setIoPri(15D);
                                    waitWrkMast.setModiTime(new Date());
                                    if (wrkMastMapper.updateById(waitWrkMast) == 0) {
                                        log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
                                    }
                                    continue;
                                } else {

                                }
                            }
                        } else if (shallowLoc.getLocSts().equals("F") || shallowLoc.getLocSts().equals("D")) {
                            // 此标记避免多次执行移库任务
                            if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())) {
                                wrkMast.setUpdMk("Y");
                                wrkMastMapper.updateById(wrkMast);
                                // 生成工作档、改变浅库位的源库/目标库 库位状态、下发堆垛机命令（立马执行)
                                moveLocForDeepLoc(slave, shallowLoc);
                            }
                            log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
                            continue;
                        }
                    }

                    // 已经存在吊车执行任务时，则过滤
                    if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                        continue;
                    }

                    // 堆垛机出库 命令下发区 --------------------------------------------------------------------------
                    // 1.堆垛机开始移动
                    CrnCommand crnCommand = new CrnCommand();
                    crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                    crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
@@ -1005,9 +1029,9 @@
                    crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
                    crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                    crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                    crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                    crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                    crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
//                crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
//                crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
//                crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                    if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                        log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                    } else {
@@ -1019,112 +1043,132 @@
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            log.error("修改工作档状态 11.生成出库ID => 16.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                        }
                        return true;
                        break;
                    }
                // 不是最外层库位，需要使用穿梭车搬运后，再堆垛机出库

                } else {
                    // 当前组库位是否有穿梭车
                    Integer steNo = this.hasCarOfIdle(wrkMast.getSourceLocNo());
                    // 有小车
                    if (steNo != null) {
                        if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {

                            // 给穿梭车下发命令 让其将货物挪至堆垛机搬运点
                            SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                            SteProtocol steProtocol = steThread.getSteProtocol();
                            if (steProtocol == null) { continue; }
                            if (steProtocol.isIdle()) {
                    // 最外层库位，直接堆垛机出库
                    if (locMastService.isOutMost(wrkMast.getSourceLocNo(), false)) {
                        // 已经存在吊车执行任务时，则过滤
                        if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                            continue;
                        }

                                // 命令下发区 --------------------------------------------------------------------------
                                SteCommand steCommand = new SteCommand();
                                steCommand.setSteNo(steNo); // 穿梭车编号
                                steCommand.setTaskNo(wrkMast.getWrkNo()); // 工作号
                                steCommand.setTaskMode(SteTaskModeType.findOutByLoc(wrkMast.getSourceLocNo())); // 任务模式:  去近点 等待堆垛机叉取
                        // 堆垛机出库 命令下发区 --------------------------------------------------------------------------
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                        crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                        crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                        crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                        crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
                        crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                        crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                        crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                        crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                        crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                        if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                            log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                        } else {
                            // 修改工作档状态 11.生成出库ID => 16.吊车出库中
                            Date now = new Date();
                            wrkMast.setWrkSts(16L);
                            wrkMast.setCrnStrTime(now);
                            wrkMast.setModiTime(now);
                            if (wrkMastMapper.updateById(wrkMast) == 0) {
                                log.error("修改工作档状态 11.生成出库ID => 16.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                            }
                            return true;
                        }
                        // 不是最外层库位，需要使用穿梭车搬运后，再堆垛机出库
                    } else {
                        // 当前组库位是否有穿梭车
                        Integer steNo = this.hasCarOfIdle(wrkMast.getSourceLocNo());
                        // 有小车
                        if (steNo != null) {
                            if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {

                                steCommand.setRow(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());
                                steCommand.setBay(steProtocol.getBay());
                                steCommand.setLev(steProtocol.getLev());
                                // 给穿梭车下发命令 让其将货物挪至堆垛机搬运点
                                SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                                SteProtocol steProtocol = steThread.getSteProtocol();
                                if (steProtocol == null) { continue; }
                                if (steProtocol.isIdle()) {

                                if (!MessageQueue.offer(SlaveType.Ste, steNo, new Task(2, steCommand))) {
                                    log.error("穿梭车命令下发失败，穿梭车号={}，任务数据={}", steNo, JSON.toJSON(steCommand));
                                } else {
                                    // 修改工作档状态 11.生成出库ID => 14.小车搬出库
                                    Date now = new Date();
                                    wrkMast.setWrkSts(14L);
                                    wrkMast.setSteNo(steNo);
                                    wrkMast.setCrnStrTime(now);
                                    wrkMast.setModiTime(now);
                                    if (wrkMastMapper.updateById(wrkMast) == 0) {
                                        log.error("修改工作档状态 11.生成出库ID => 14.小车搬出库 失败！！，工作号={}", wrkMast.getWrkNo());
                                    // 命令下发区 --------------------------------------------------------------------------
                                    SteCommand steCommand = new SteCommand();
                                    steCommand.setSteNo(steNo); // 穿梭车编号
                                    steCommand.setTaskNo(wrkMast.getWrkNo()); // 工作号
                                    steCommand.setTaskMode(SteTaskModeType.findOutByLoc(wrkMast.getSourceLocNo())); // 任务模式:  去近点 等待堆垛机叉取

                                    steCommand.setRow(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());
                                    steCommand.setBay(steProtocol.getBay());
                                    steCommand.setLev(steProtocol.getLev());

                                    if (!MessageQueue.offer(SlaveType.Ste, steNo, new Task(2, steCommand))) {
                                        log.error("穿梭车命令下发失败，穿梭车号={}，任务数据={}", steNo, JSON.toJSON(steCommand));
                                    } else {
                                        // 修改工作档状态 11.生成出库ID => 14.小车搬出库
                                        Date now = new Date();
                                        wrkMast.setWrkSts(14L);
                                        wrkMast.setSteNo(steNo);
                                        wrkMast.setCrnStrTime(now);
                                        wrkMast.setModiTime(now);
                                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                                            log.error("修改工作档状态 11.生成出库ID => 14.小车搬出库 失败！！，工作号={}", wrkMast.getWrkNo());
                                        }
                                    }
                                }
                            }
                        }
                        if (wrkMast.getWrkSts() == 15L) {
                            // 已经存在吊车执行任务时，则过滤
                            if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                                continue;
                            }

                            // 堆垛机出库 命令下发区 --------------------------------------------------------------------------
                            CrnCommand crnCommand = new CrnCommand();
                            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                            crnCommand.setSourcePosX(Utils.getGroupRow(sourceSta.getRow1()).shortValue());     // 源库位排
                            crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                            crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                            crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                            crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                            crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                            if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                                log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                            } else {
                                // 修改工作档状态 15.等待吊车 => 16.吊车出库中
                                Date now = new Date();
                                wrkMast.setWrkSts(16L);
                                wrkMast.setCrnStrTime(now);
                                wrkMast.setModiTime(now);
                                if (wrkMastMapper.updateById(wrkMast) == 0) {
                                    log.error("修改工作档状态 15.等待吊车 => 16.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                            if (wrkMast.getWrkSts() == 15L) {
                                // 已经存在吊车执行任务时，则过滤
                                if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                                    continue;
                                }
                                return true;
                            }
                        }

                    // 没有小车
                    } else {
                        if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {
                            // 寻找最近的小车
                            SteThread steThread = queryIdleCar(wrkMast);
                            if (steThread != null) {
                                // 没有其他任务
//                                boolean hasPakout = true;
//                                WrkMast pakoutWrkMast = wrkMastMapper.selectPakout(slave.getId(), steNo);
//                                if (null != pakoutWrkMast) {
//                                    if ((pakoutWrkMast.getIoType() == 103 || pakoutWrkMast.getIoType() == 104 || pakoutWrkMast.getIoType() == 107)
//                                            && pakoutWrkMast.getWrkSts() == 17
//                                            && basDevpService.selectByWrkNo(pakoutWrkMast.getWrkNo()) != null
//                                    ) {
//                                        hasPakout = false;
//                                    }
//                                } else {
//                                    hasPakout = false;
//                                }
//                                if (!hasPakout) {
//                                    // 让小车等待搬运待续
//                                    this.letCarBeReady(wrkMast, steThread.getSlave().getId(), wrkMast.getSourceLocNo());
//                                }
                                if (null == wrkMastMapper.selectPakout(slave.getId(), steNo)) {
                                    // 让小车等待搬运待续
                                    this.letCarBeReady(wrkMast, steThread.getSlave().getId(), wrkMast.getSourceLocNo());
                                // 堆垛机出库 命令下发区 --------------------------------------------------------------------------
                                CrnCommand crnCommand = new CrnCommand();
                                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                                crnCommand.setSourcePosX(Utils.getGroupRow(sourceSta.getRow1()).shortValue());     // 源库位排
                                crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                                crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                                crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                                crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                                crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                                    log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                                } else {
                                    // 修改工作档状态 15.等待吊车 => 16.吊车出库中
                                    Date now = new Date();
                                    wrkMast.setWrkSts(16L);
                                    wrkMast.setCrnStrTime(now);
                                    wrkMast.setModiTime(now);
                                    if (wrkMastMapper.updateById(wrkMast) == 0) {
                                        log.error("修改工作档状态 15.等待吊车 => 16.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                                    }
                                    return true;
                                }
                            }
                        }
                        // 堆垛机搬运小车
                        if (wrkMast.getWrkSts() == 12L) {
                            this.carMoveIn(wrkMast, wrkMast.getSteNo(), crnProtocol);

                            // 没有小车
                        } else {
                            if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {
                                // 寻找最近的小车
                                SteThread steThread = queryIdleCar(wrkMast);
                                if (steThread != null) {
                                    // 没有其他任务
                                    if (null == wrkMastMapper.selectPakout(slave.getId(), steNo)) {
                                        // 让小车等待搬运待续
                                        this.letCarBeReady(wrkMast, steThread.getSlave().getId(), wrkMast.getSourceLocNo());
                                    }
                                }
                            }
                            // 堆垛机搬运小车
                            if (wrkMast.getWrkSts() == 12L) {
                                this.carMoveIn(wrkMast, wrkMast.getSteNo(), crnProtocol);
                            }
                        }
                    }
                }
@@ -1179,251 +1223,31 @@
        wrkMast.setIoPri((double) 9999);
        wrkMastMapper.updateById(wrkMast);

        // 源库位 ===>> 最外层库位
        if (locMastService.isOutMost(wrkMast.getSourceLocNo())) {
            // 目标库位 ===>> 最外层库位
            if (locMastService.isOutMost(wrkMast.getLocNo())) {
                // todo:luxiaotao 判断目标库位是否存在小车，如果存在，则搬走小车

                // 命令下发区 --------------------------------------------------------------------------
                CrnCommand crnCommand = new CrnCommand();
                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                crnCommand.setSourcePosX(sourceLoc.getRow1().shortValue());     // 源库位排
                crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
                crnCommand.setSourcePosZ(sourceLoc.getLev1().shortValue());     // 源库位层
                crnCommand.setDestinationPosX(loc.getRow1().shortValue());     // 目标库位排
                crnCommand.setDestinationPosY(loc.getBay1().shortValue());     // 目标库位列
                crnCommand.setDestinationPosZ(loc.getLev1().shortValue());     // 目标库位层
                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                    log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                } else {
                    // 修改工作档状态 11.生成出库ID => 16.吊车出库中
                    Date now = new Date();
                    wrkMast.setWrkSts(16L);
                    wrkMast.setCrnStrTime(now);
                    wrkMast.setModiTime(now);
                    if (wrkMastMapper.updateById(wrkMast) == 0) {
                        log.error("【库位移转】 修改工作档状态 11.生成出库ID => 12.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                    }
                }
            } else {
                Integer steNo = this.hasCarOfIdle(wrkMast.getLocNo());
                // 有小车
                if (steNo != null) {
                    // 小车行走到堆垛机待搬移点
                    if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {
                        // 标记移库当前流程
                        wrkMast.setMk("I");
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            log.error("标记移库当前流程 I 失败！！，工作号={}", wrkMast.getWrkNo());
                        }
                        this.letCarBeWaiting(wrkMast, steNo, wrkMast.getLocNo());
                    }
                    // 堆垛机将货放至小车上 6.小车待入  ===>> 7.吊车入库中
                    if (wrkMast.getWrkSts() == 6L) {
                        // 小车处于空闲
                        SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                        SteProtocol steProtocol = steThread.getSteProtocol();
                        if (steProtocol == null) { return; }
                        if (steProtocol.isIdle()) {

                            // 已经存在吊车执行任务时，则过滤
                            if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                                return;
                            }
                            // 堆垛机入库 命令下发区 --------------------------------------------------------------------------
                            CrnCommand crnCommand = new CrnCommand();
                            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                            crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                            crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
                            crnCommand.setSourcePosZ(sourceLoc.getLev1().shortValue());     // 源库位层
                            crnCommand.setDestinationPosX(Utils.getGroupRow(loc.getRow1()).shortValue());     // 目标库位排
                            crnCommand.setDestinationPosY(loc.getBay1().shortValue());     // 目标库位列
                            crnCommand.setDestinationPosZ(loc.getLev1().shortValue());     // 目标库位层
                            if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                                log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                            } else {
                                // 修改工作档状态  6.小车待入 ===>> 7.吊车入库中
                                Date now = new Date();
                                wrkMast.setWrkSts(7L);
                                wrkMast.setCrnStrTime(now);
                                wrkMast.setModiTime(now);
                                if (wrkMastMapper.updateById(wrkMast) == 0) {
                                    log.error("修改工作档状态 3.小车待搬/6.小车待入 => 7.吊车入库中 失败！！，工作号={}", wrkMast.getWrkNo());
                                }
                            }
                        }
                    }
                } else {
                    if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {
                        // 寻找当前堆垛机对应的小车
                        SteThread steThread = queryIdleCar(wrkMast);
                        if (steThread != null) {
                            // 标记移库当前流程
                            wrkMast.setMk("I");
                            if (wrkMastMapper.updateById(wrkMast) == 0) {
                                log.error("标记移库当前流程 I 失败！！，工作号={}", wrkMast.getWrkNo());
                            }
                            // 让小车等待搬运待续
                            this.letCarBeReady(wrkMast, steThread.getSlave().getId(), wrkMast.getLocNo());
                        }
                    }
                    // 堆垛机搬运小车
                    if (wrkMast.getWrkSts() == 3L) {
                        this.carMoveIn(wrkMast, wrkMast.getSteNo(), crnProtocol);
                    }
                }
            }

        // 命令下发区 --------------------------------------------------------------------------
        CrnCommand crnCommand = new CrnCommand();
        crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
        crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
        crnCommand.setAckFinish((short) 0);  // 任务完成确认位
        crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
        crnCommand.setSourcePosX(sourceLoc.getRow1().shortValue());     // 源库位排
        crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
        crnCommand.setSourcePosZ(sourceLoc.getLev1().shortValue());     // 源库位层
        crnCommand.setDestinationPosX(loc.getRow1().shortValue());     // 目标库位排
        crnCommand.setDestinationPosY(loc.getBay1().shortValue());     // 目标库位列
        crnCommand.setDestinationPosZ(loc.getLev1().shortValue());     // 目标库位层
        if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
            log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
        } else {

            // 当前组库位是否有穿梭车
            Integer steNo = this.hasCarOfIdle(wrkMast.getSourceLocNo());
            // 有小车
            if (steNo != null) {
                if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {

                    // 给穿梭车下发命令 让其将货物挪至堆垛机搬运点
                    SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                    SteProtocol steProtocol = steThread.getSteProtocol();
                    if (steProtocol == null) { return; }
                    if (steProtocol.isIdle()) {

                        // 命令下发区 --------------------------------------------------------------------------
                        SteCommand steCommand = new SteCommand();
                        steCommand.setSteNo(steNo); // 穿梭车编号
                        steCommand.setTaskNo(wrkMast.getWrkNo()); // 工作号
                        steCommand.setTaskMode(SteTaskModeType.findOutByLoc(wrkMast.getSourceLocNo())); // 任务模式:  去近点 等待堆垛机叉取

                        steCommand.setRow(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());
                        steCommand.setBay(steProtocol.getBay());
                        steCommand.setLev(steProtocol.getLev());

                        if (!MessageQueue.offer(SlaveType.Ste, steNo, new Task(2, steCommand))) {
                            log.error("穿梭车命令下发失败，穿梭车号={}，任务数据={}", steNo, JSON.toJSON(steCommand));
                        } else {
                            // 修改工作档状态 11.生成出库ID => 14.小车搬出库
                            Date now = new Date();
                            wrkMast.setWrkSts(14L);
                            wrkMast.setSteNo(steNo);
                            wrkMast.setCrnStrTime(now);
                            wrkMast.setModiTime(now);
                            if (wrkMastMapper.updateById(wrkMast) == 0) {
                                log.error("修改工作档状态 11.生成出库ID => 14.小车搬出库 失败！！，工作号={}", wrkMast.getWrkNo());
                            }
                        }
                    }
                }
                if (wrkMast.getWrkSts() == 15L) {
                    // 已经存在吊车执行任务时，则过滤
                    if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                        return;
                    }

                    // 目标库位 ===>> 最外层库位
                    if (locMastService.isOutMost(wrkMast.getLocNo())) {
                        // 堆垛机出库 命令下发区 --------------------------------------------------------------------------
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                        crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                        crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                        crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                        crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                        crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
                        crnCommand.setSourcePosZ(sourceLoc.getLev1().shortValue());     // 源库位层
                        crnCommand.setDestinationPosX(Utils.getGroupRow(loc.getRow1()).shortValue());     // 目标库位排
                        crnCommand.setDestinationPosY(loc.getBay1().shortValue());     // 目标库位列
                        crnCommand.setDestinationPosZ(loc.getLev1().shortValue());     // 目标库位层
                        if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                            log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                        } else {
                            // 修改工作档状态 15.等待吊车 => 16.吊车出库中
                            Date now = new Date();
                            wrkMast.setWrkSts(16L);
                            wrkMast.setCrnStrTime(now);
                            wrkMast.setModiTime(now);
                            if (wrkMastMapper.updateById(wrkMast) == 0) {
                                log.error("修改工作档状态 15.等待吊车 => 16.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                            }
//                            wrkMastMapper.setSteEmpty(wrkMast.getWrkNo());
                        }
                    } else {

                        // 把货搬到临时存放货位 todo:luxiaotao


                        // 小车行走到堆垛机待搬移点
                        if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {
                            this.letCarBeWaiting(wrkMast, steNo, wrkMast.getLocNo());
                        }
                        // 堆垛机将货放至小车上 6.小车待入  ===>> 7.吊车入库中
                        if (wrkMast.getWrkSts() == 6L) {
                            // 小车处于空闲
                            SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                            SteProtocol steProtocol = steThread.getSteProtocol();
                            if (steProtocol == null) { return; }
                            if (steProtocol.isIdle()) {

                                // 已经存在吊车执行任务时，则过滤
                                if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                                    return;
                                }
                                // 堆垛机入库 命令下发区 --------------------------------------------------------------------------
                                CrnCommand crnCommand = new CrnCommand();
                                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                                crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                                crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
                                crnCommand.setSourcePosZ(sourceLoc.getLev1().shortValue());     // 源库位层
                                crnCommand.setDestinationPosX(Utils.getGroupRow(loc.getRow1()).shortValue());     // 目标库位排
                                crnCommand.setDestinationPosY(loc.getBay1().shortValue());     // 目标库位列
                                crnCommand.setDestinationPosZ(loc.getLev1().shortValue());     // 目标库位层
                                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                                    log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                                } else {
                                    // 修改工作档状态  6.小车待入 ===>> 7.吊车入库中
                                    Date now = new Date();
                                    wrkMast.setWrkSts(7L);
                                    wrkMast.setCrnStrTime(now);
                                    wrkMast.setModiTime(now);
                                    if (wrkMastMapper.updateById(wrkMast) == 0) {
                                        log.error("修改工作档状态 3.小车待搬/6.小车待入 => 7.吊车入库中 失败！！，工作号={}", wrkMast.getWrkNo());
                                    }
                                }
                            }
                        }

                    }

                }
            } else {
                if (wrkMast.getWrkSts() == 11L && wrkMast.getSteNo() == null) {
                    // 寻找最近的小车
                    SteThread steThread = queryIdleCar(wrkMast);
                    if (steThread != null) {
                        // 标记移库当前流程
                        wrkMast.setMk("O");
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            log.error("标记移库当前流程 I 失败！！，工作号={}", wrkMast.getWrkNo());
                        }
                        // 让小车等待搬运待续
                        this.letCarBeReady(wrkMast, steThread.getSlave().getId(), wrkMast.getSourceLocNo());
                    }
                }
                // 堆垛机搬运小车
                if (wrkMast.getWrkSts() == 12L) {
                    this.carMoveIn(wrkMast, wrkMast.getSteNo(), crnProtocol);
                }
            // 修改工作档状态 11.生成出库ID => 16.吊车出库中
            Date now = new Date();
            wrkMast.setWrkSts(16L);
            wrkMast.setCrnStrTime(now);
            wrkMast.setModiTime(now);
            if (wrkMastMapper.updateById(wrkMast) == 0) {
                log.error("【库位移转】 修改工作档状态 11.生成出库ID => 16.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
            }
        }

    }

    /**
@@ -1526,7 +1350,7 @@
        SteCommand steCommand = new SteCommand();
        steCommand.setSteNo(steNo); // 穿梭车编号
        steCommand.setTaskNo(wrkCharge.getWrkNo()); // 工作号
        steCommand.setTaskMode(SteTaskModeType.findOriginByLoc(steProtocol.getRow())); // 任务模式:  去近点 等待堆垛机叉取
        steCommand.setTaskMode(SteTaskModeType.findOriginByLoc(steProtocol.getRow().intValue())); // 任务模式:  去近点 等待堆垛机叉取

        steCommand.setRow(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());
        steCommand.setBay(steProtocol.getBay());
@@ -1799,8 +1623,7 @@
                if (wrkMast.getIoType() != 11) {
                    // 入库 ==>> 货物搬入库
                    if (wrkMast.getWrkSts() == 7){
                        // 判断是否需要小车入库
                        if (locMastService.isOutMost(wrkMast.getLocNo())) {
                        if (!locMastService.isShuttle(wrkMast.getLocNo())) {
                            // ==> 9.入库完成
                            wrkMast.setWrkSts(9L);
                            Date now = new Date();
@@ -1814,35 +1637,51 @@
                                log.error("修改工作档状态 7.吊车入库中 => 9.入库完成 失败！！，工作号={}", wrkMast.getWrkNo());
                            }
                        } else {
                            // 给穿梭车下发命令
                            Integer steNo = wrkMast.getSteNo();
                            SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                            SteProtocol steProtocol = steThread.getSteProtocol();
                            if (steProtocol == null) { continue; }
                            if (steProtocol.isIdle()) {
                                // 命令下发区 --------------------------------------------------------------------------
                                SteCommand steCommand = new SteCommand();
                                steCommand.setSteNo(steNo); // 穿梭车编号
                                steCommand.setTaskNo(wrkMast.getWrkNo()); // 工作号
                                steCommand.setTaskMode(SteTaskModeType.findInByLoc(wrkMast.getLocNo())); // 任务模式: 搬入库
                                if (!MessageQueue.offer(SlaveType.Ste, steNo, new Task(2, steCommand))) {
                                    log.error("穿梭车命令下发失败，穿梭车号={}，任务数据={}", steNo, JSON.toJSON(steCommand));
                            // 判断是否需要小车入库
                            if (locMastService.isOutMost(wrkMast.getLocNo())) {
                                // ==> 9.入库完成
                                wrkMast.setWrkSts(9L);
                                Date now = new Date();
                                wrkMast.setCrnEndTime(now);
                                wrkMast.setModiTime(now);
                                // 修改成功后复位堆垛机
                                if (wrkMastMapper.updateById(wrkMast) > 0) {
                                    // 堆垛机复位
                                    crnThread.setResetFlag(true);
                                } else {
                                    // 修改工作档状态 7.吊车入库中 => 8.小车搬入库
                                    wrkMast.setWrkSts(8L);
                                    Date now = new Date();
                                    wrkMast.setCrnEndTime(now);
                                    wrkMast.setModiTime(now);
                                    if (wrkMastMapper.updateById(wrkMast) > 0) {
                                        // 堆垛机复位
                                        crnThread.setResetFlag(true);
                                    log.error("修改工作档状态 7.吊车入库中 => 9.入库完成 失败！！，工作号={}", wrkMast.getWrkNo());
                                }
                            } else {
                                // 给穿梭车下发命令
                                Integer steNo = wrkMast.getSteNo();
                                SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, steNo);
                                SteProtocol steProtocol = steThread.getSteProtocol();
                                if (steProtocol == null) { continue; }
                                if (steProtocol.isIdle()) {
                                    // 命令下发区 --------------------------------------------------------------------------
                                    SteCommand steCommand = new SteCommand();
                                    steCommand.setSteNo(steNo); // 穿梭车编号
                                    steCommand.setTaskNo(wrkMast.getWrkNo()); // 工作号
                                    steCommand.setTaskMode(SteTaskModeType.findInByLoc(wrkMast.getLocNo())); // 任务模式: 搬入库
                                    if (!MessageQueue.offer(SlaveType.Ste, steNo, new Task(2, steCommand))) {
                                        log.error("穿梭车命令下发失败，穿梭车号={}，任务数据={}", steNo, JSON.toJSON(steCommand));
                                    } else {
                                        log.error("修改工作档状态 7.吊车入库中 => 8.小车搬入库 失败！！，工作号={}", wrkMast.getWrkNo());
                                        // 修改工作档状态 7.吊车入库中 => 8.小车搬入库
                                        wrkMast.setWrkSts(8L);
                                        Date now = new Date();
                                        wrkMast.setCrnEndTime(now);
                                        wrkMast.setModiTime(now);
                                        if (wrkMastMapper.updateById(wrkMast) > 0) {
                                            // 堆垛机复位
                                            crnThread.setResetFlag(true);
                                        } else {
                                            log.error("修改工作档状态 7.吊车入库中 => 8.小车搬入库 失败！！，工作号={}", wrkMast.getWrkNo());
                                        }
                                    }
                                }
                            }
                        }
                        // 入库 ===>> 迁入小车 完成
                    // 入库 ===>> 迁入小车 完成
                    } else if (wrkMast.getWrkSts() == 4) {
                        // 4.迁入小车 ==> 6.小车待入
                        wrkMast.setWrkSts(6L);
@@ -2970,7 +2809,7 @@
                SteCommand steCommand = new SteCommand();
                steCommand.setSteNo(steNo); // 穿梭车编号
                steCommand.setTaskNo(wrkCharge.getWrkNo()); // 工作号
                SteTaskModeType originByLoc = SteTaskModeType.findOriginByLoc(steProtocol.getRow());
                SteTaskModeType originByLoc = SteTaskModeType.findOriginByLoc(steProtocol.getRow().intValue());
                if (originByLoc.equals(SteTaskModeType.GO_ORIGIN)) {
                    originByLoc = SteTaskModeType.BACK_ORIGIN;
                } else if (originByLoc.equals(SteTaskModeType.BACK_ORIGIN)) {
@@ -3059,7 +2898,7 @@
            wrkMast.setIoTime(new Date());
            wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
            wrkMast.setIoType(11); // 入出库状态： 11.库格移载
            wrkMast.setIoPri(13D);
            wrkMast.setIoPri(20D);
            wrkMast.setCrnNo(crn.getId());
            wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
            wrkMast.setLocNo(loc.getLocNo()); // 目标库位