空托回流

pang.jiabao

2024-08-18 e31d11ff9f7ca2fd32e06494ad1c325a46624983

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -1397,18 +1397,19 @@
                }
            }

            // 命令下发区 --------------------------------------------------------------------------
            // 入库命令下发区 --------------------------------------------------------------------------
            CrnCommand crnCommand = new CrnCommand();
            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
            crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
            crnCommand.setSourcePosY(crnStn.getBay().shortValue());     // 源库位列
            crnCommand.setSourcePosZ(crnStn.getLev().shortValue());     // 源库位层
            //crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
            //crnCommand.setSourcePosY(crnStn.getBay().shortValue());     // 源库位列
            //crnCommand.setSourcePosZ(crnStn.getLev().shortValue());     // 源库位层
            crnCommand.setDestinationPosX(locMast.getRow1().shortValue());     // 目标库位排
            crnCommand.setDestinationPosY(locMast.getBay1().shortValue());     // 目标库位列
            crnCommand.setDestinationPosZ(locMast.getLev1().shortValue());     // 目标库位层
            crnCommand.setSourceStaNo(crnStn.getPlatNo().shortValue());     // 源库位排
            if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
            } else {
@@ -1595,13 +1596,6 @@
                log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
                continue;
            }
            //退库模式跳过118、119出库任务
            if (wrkMast.getStaNo()==118 || wrkMast.getStaNo()==119){
                RgvOneSign rgvOneSign = rgvOneSignMapper.selectOneSign();
                if (Cools.isEmpty(rgvOneSign) || rgvOneSign.getRgvOneSign()==1){
                    continue;
                }
            }
            // 获取源库位信息
            LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
            if (!sourceSta.getLocSts().equals("R") && !sourceSta.getLocSts().equals("P")) {
@@ -1609,20 +1603,20 @@
                continue;
            }
            // 获取堆垛机出库站信息
            SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
            StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
            if (staProtocol == null) {
                break;
//                    continue;
            } else {
                staProtocol = staProtocol.clone();
            }
            //SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
            //StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
//            if (staProtocol == null) {
//                break;
////                    continue;
//            } else {
//                staProtocol = staProtocol.clone();
//            }

//            // 入出库模式判断
//            if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
            if (wrkMast.getStaNo() == 204 && devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
                continue;
            }
//            if (wrkMast.getStaNo() == 204 && devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
//                continue;
//            }

            // 查询站点详细信息
            BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
@@ -1632,8 +1626,9 @@
//                    continue;
            }
            // 判断堆垛机出库站状态
            if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")
                    && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
            //if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")
            //        && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
            if (staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")) {
                // 命令下发区 --------------------------------------------------------------------------

                // 堆垛机控制过滤
@@ -1692,7 +1687,7 @@
//                        return;
                }

                // 1.堆垛机开始移动
                // 1.堆垛机开始移动   出库命令
                CrnCommand crnCommand = new CrnCommand();
                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
@@ -1701,9 +1696,10 @@
                crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
                crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
//                crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
//                crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
//                crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                crnCommand.setDestinationStaNo(crnStn.getPlatNo().shortValue());
                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                    log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                } else {
@@ -2024,6 +2020,9 @@
                    // 入库 + 库位转移  ==> 4.入库完成
                    if (wrkMast.getWrkSts() == 3 || (wrkMast.getWrkSts() == 12 && wrkMast.getIoType() == 11)) {
                        wrkMast.setWrkSts(4L);
                        if (wrkMast.getIoType() == 3) {
                            wrkMast.setWrkSts(13L);
                        }
                    } else {
                        continue;
                    }
@@ -4617,4 +4616,65 @@
        }
    }

    /**
     * 二楼空托回流到一楼，3.站到站任务
     */
    public synchronized void emptyTrayReflux() {
        for (CrnSlave crn : slaveProperties.getCrn()) {
            List<WrkMast> wrkMastList = wrkMastMapper.selectList(new EntityWrapper<WrkMast>().eq("wrk_sts", 2)
                    .eq("crn_no",crn.getId()).eq("io_type", 3));
            for (WrkMast wrkMast : wrkMastList) {
                CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
                CrnProtocol crnProtocol = crnThread.getCrnProtocol();
                if (crnProtocol == null) {
                    continue;
                }
                if (crnProtocol.getStatusType() == CrnStatusType.IDLE
                        && crnProtocol.getTaskNo() == 0
                        && crnProtocol.getModeType() == CrnModeType.AUTO
                        && crnProtocol.getLoaded() == 0
                        && crnProtocol.getForkPos() == 0) {

                    CrnSlave.CrnStn crnStn = null;
                    for (CrnSlave.CrnStn crnStn1 : crn.getCrnInStn()){
                        if(crnStn1.getStaNo().equals(wrkMast.getStaNo())){
                            crnStn = crnStn1;
                            break;
                        }
                    }
                    if(Cools.isEmpty(crnStn)){
                        continue;
                    }

                    // 入库命令下发区 --------------------------------------------------------------------------
                    CrnCommand crnCommand = new CrnCommand();
                    crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
                    crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                    crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                    crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                    //crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
                    //crnCommand.setSourcePosY(crnStn.getBay().shortValue());     // 源库位列
                    //crnCommand.setSourcePosZ(crnStn.getLev().shortValue());     // 源库位层
                    crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                    crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                    crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                    crnCommand.setSourceStaNo(crnStn.getPlatNo().shortValue());     // 源库位排
                    if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                        log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                    } else {
                        // 修改工作档状态 2.设备上走 => 3.吊车入库中
                        Date now = new Date();
                        wrkMast.setWrkSts(3L);
                        wrkMast.setCrnStrTime(now);
                        wrkMast.setModiTime(now);
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            log.error("修改工作档状态 2.设备上走 => 3.吊车入库中 失败！！，工作号={}", wrkMast.getWrkNo());
                        }
                    }
                    break;
                }

            }
        }
    }
}