zy-wcs.git - Gitblit

			@@ -3,54 +3,45 @@
			import com.alibaba.fastjson.JSON;
			import com.alibaba.fastjson.JSONObject;
			import com.baomidou.mybatisplus.mapper.EntityWrapper;
			import com.baomidou.mybatisplus.mapper.Wrapper;
			import com.core.common.Cools;
			import com.core.common.DateUtils;
			import com.core.exception.CoolException;
			import com.zy.asrs.controller.CrnController;
			import com.zy.asrs.domain.enums.TaskStatusType;
			import com.zy.asrs.domain.enums.WorkNoType;
			import com.zy.asrs.domain.param.CrnOperatorParam;
			import com.zy.asrs.entity.*;
			import com.zy.asrs.mapper.BasCrnErrorMapper;
			import com.zy.asrs.mapper.WaitPakinMapper;
			import com.zy.asrs.mapper.WrkMastMapper;
			import com.zy.asrs.mapper.*;
			import com.zy.asrs.service.*;
			import com.zy.asrs.utils.CommandUtils;
			import com.zy.asrs.utils.Utils;
			import com.zy.asrs.utils.VersionUtils;
			import com.zy.common.model.LocTypeDto;
			import com.zy.common.model.MatDto;
			import com.zy.common.model.SearchLocParam;
			import com.zy.common.model.StartupDto;
			import com.zy.common.service.CommonService;
			import com.zy.common.utils.CollectionUtils;
			import com.zy.common.utils.HttpHandler;
			import com.zy.core.CrnThread;
			import com.zy.core.DevpThread;
			import com.zy.core.cache.MessageQueue;
			import com.zy.core.cache.RgvStatusCache;
			import com.zy.core.cache.SlaveConnection;
			import com.zy.core.enums.*;
			import com.zy.core.model.CrnSlave;
			import com.zy.core.model.DevpSlave;
			import com.zy.core.model.LedSlave;
			import com.zy.core.model.RgvSlave;
			import com.zy.core.model.Task;
			import com.zy.core.model.command.CrnCommand;
			import com.zy.core.model.command.LedCommand;
			import com.zy.core.model.protocol.CrnProtocol;
			import com.zy.core.model.protocol.RgvProtocol;
			import com.zy.core.model.protocol.StaProtocol;
			import com.zy.core.properties.SlaveProperties;
			import com.zy.core.thread.BarcodeThread;
			import com.zy.core.thread.LedThread;
			import com.zy.core.thread.SiemensDevpThread;
			import lombok.extern.slf4j.Slf4j;
			import org.springframework.beans.factory.annotation.Autowired;
			import org.springframework.beans.factory.annotation.Value;
			import org.springframework.scheduling.annotation.Async;
			import org.springframework.stereotype.Service;
			import org.springframework.transaction.annotation.Transactional;
			import org.springframework.transaction.interceptor.TransactionAspectSupport;

			import java.util.ArrayList;
			import java.util.Date;
			import java.util.List;
			import java.util.Set;
			import java.util.stream.Collectors;
			import java.io.IOException;
			import java.util.*;

			/**
			* 立体仓库WCS系统主流程业务
			@@ -61,443 +52,382 @@
			@Transactional
			public class MainServiceImpl {

			public static final long COMMAND_TIMEOUT = 5 * 1000;

			@Autowired
			private CommonService commonService;
			@Autowired
			private SlaveProperties slaveProperties;
			@Autowired
			private WrkMastMapper wrkMastMapper;
			@Autowired
			private WrkDetlService wrkDetlService;
			@Autowired
			private WaitPakinMapper waitPakinMapper;
			@Autowired
			private LocMastService locMastService;
			@Autowired
			private StaDescService staDescService;
			@Autowired
			private BasCrnpService basCrnpService;
			@Autowired
			private BasDevpService basDevpService;
			@Autowired
			private LocDetlService locDetlService;
			@Autowired
			private BasErrLogService basErrLogService;
			@Autowired
			private BasCrnErrorMapper basCrnErrorMapper;
			@Autowired
			private TaskWrkMapper taskWrkMapper;
			@Autowired
			private TaskWrkService taskWrkService;
			@Autowired
			private StaDescMapper staDescMapper;
			@Autowired
			private StaDescService staDescService;
			@Autowired
			private ApiLogService apiLogService;
			@Autowired
			private CommonService commonService;
			@Autowired
			private CrnController crnController;

			@Value("${wms.url}")
			private String wmsUrl;
			@Value("${wms.inboundTaskApplyPath}")
			private String inboundTaskApplyPath;
			@Value("${wms.taskStatusFeedbackPath}")
			private String taskStatusFeedbackPath;

			/**
			* 组托
			* 入库站，根据条码扫描生成入库工作档，工作状态 2
			*/
			@Value("${wms.rgvOpen}")
			private boolean rgvOpen;

			@Value("${constant-parameters.trackEntireLength}")
			private Long trackEntireLength;

			@Value("${constant-parameters.trackBenchmark}")
			private Long trackBenchmark;

			@Value("${constant-parameters.trackProportion}")
			private Long trackProportion;

			public void generateStoreWrkFile() {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getInSta()) {
			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {
			log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			try {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getInSta()) {
			// 获取入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			continue;
			}
			} else {
			continue;
			}

			// 获取入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if ( inSta.getStaNo()==180 && devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getWorkNo() > 9990)
			&& staProtocol.isPakMk()){// && !Cools.isEmpty(barcode)) {

			// if(Cools.isEmpty(barcode) \|\| "NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			// log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			// //条码为空或者不符合，退库到172站点
			// staProtocol.setWorkNo((short)9999);
			// staProtocol.setStaNo((short)172);
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// if (!result) {
			// throw new CoolException("更新plc站点信息失败");
			// }
			// continue;
			// }

			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			if (wrkMast != null) {
			log.error("工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast.getWrkNo());
			continue;
			}
			// // 获取入库通知档
			// List<WaitPakin> waitPakins = waitPakinMapper.selectList(new EntityWrapper<WaitPakin>().eq("zpallet", barcode).eq("io_status", "N"));
			// if (waitPakins.isEmpty()) {
			// log.error("无此入库条码数据。条码号={}", barcode);
			// continue;
			// }

			try {

			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

			SearchLocParam param = new SearchLocParam();
			param.setBarcode(barcode);
			param.setIoType(1);
			param.setSourceStaNo(inSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);

			barcodeThread.setBarcode("");
			staProtocol.setWorkNo(dto.getWorkNo().shortValue());
			staProtocol.setStaNo(dto.getStaNo().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			throw new CoolException("更新plc站点信息失败");
			}
			} else {
			log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl+"/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}


			// // 检索库位
			// LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			// List<String> matNos = waitPakins.stream().map(WaitPakin::getMatnr).distinct().collect(Collectors.toList());
			// StartupDto startupDto = commonService.getLocNo(1, 1, inSta.getStaNo(), matNos, locTypeDto, 0);
			// // 工作号
			// int workNo = startupDto.getWorkNo();
			// // 插入工作明细档
			// wrkDetlService.createWorkDetail(workNo, waitPakins, barcode);
			//
			// // 插入工作主档
			// wrkMast = new WrkMast();
			// wrkMast.setWrkNo(workNo);
			// wrkMast.setIoTime(new Date());
			// wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			// wrkMast.setIoType(1); // 入出库状态：1.入库
			// wrkMast.setIoPri(10D); // 优先级：10
			// wrkMast.setCrnNo(startupDto.getCrnNo());
			// wrkMast.setSourceStaNo(startupDto.getSourceStaNo());
			// wrkMast.setStaNo(startupDto.getStaNo());
			// wrkMast.setLocNo(startupDto.getLocNo());
			// wrkMast.setBarcode(barcode); // 托盘码
			// wrkMast.setFullPlt("Y"); // 满板：Y
			// wrkMast.setPicking("N"); // 拣料
			// wrkMast.setExitMk("N"); // 退出
			// wrkMast.setEmptyMk("N"); // 空板
			// wrkMast.setLinkMis("N");
			// // 操作人员数据
			// wrkMast.setAppeTime(new Date());
			// wrkMast.setModiTime(new Date());
			// Integer insert = wrkMastMapper.insert(wrkMast);
			// if (insert == 0) {
			// throw new CoolException("保存工作档失败");
			// }
			// // 更新目标库位状态
			// LocMast locMast = locMastService.selectById(startupDto.getLocNo());
			// locMast.setLocSts("S"); // S.入库预约
			// locMast.setModiTime(new Date());
			// if (!locMastService.updateById(locMast)){
			// throw new CoolException("改变库位状态失败");
			// }
			// // 将入库通知档修改为已启动
			// if (wrkMastMapper.updateWaitPakInStep1(barcode) == 0) {
			// throw new CoolException("修改入库通知档状态为已启动失败");
			// }
			//
			// // 命令下发区 --------------------------------------------------------------------------
			//
			// // 更新站点信息且下发plc命令
			// barcodeThread.setBarcode("");
			// staProtocol.setWorkNo((short) workNo);
			// staProtocol.setStaNo(startupDto.getStaNo().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// if (!result) {
			// throw new CoolException("更新plc站点信息失败");
			// }

			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			}


			}
			}

			}

			/**
			* wms入库
			* 入库站，根据条码扫描生成入库工作档，工作状态 1 ==>> 2
			*/
			public void generateStoreWrkFile0() {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getInSta()) {
			// 获取入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getWorkNo() == 9999)
			&& staProtocol.isPakMk()) {
			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep11(inSta.getStaNo());
			if (wrkMast == null) { continue; }

			// 命令下发区 --------------------------------------------------------------------------

			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (result) {
			// 更新工作主档
			wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			}
			} else {
			log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			staProtocol = staProtocol.clone();
			}
			Integer workNo = staProtocol.getWorkNo();
			Integer stano = staProtocol.getStaNo();

			// 尺寸检测异常
			boolean back = false;
			String errMsg = "";
			if (staProtocol.isFrontErr()) {
			errMsg = "前超限";
			back = true;
			}
			if (!back && staProtocol.isBackErr()) {
			errMsg = "后超限";
			back = true;
			}
			if (!back && staProtocol.isHighErr()) {
			errMsg = "高超限";
			back = true;
			}
			if (!back && staProtocol.isLeftErr()) {
			errMsg = "左超限";
			back = true;
			}
			if (!back && staProtocol.isRightErr()) {
			errMsg = "右超限";
			back = true;
			}
			if (!back && staProtocol.isWeightErr()) {
			errMsg = "超重";
			back = true;
			}
			if (!back && staProtocol.isBarcodeErr()) {
			errMsg = "扫码失败";
			back = true;
			}
			// 退回
			if (back) {
			if (stano == inSta.getBackSta().shortValue()){
			continue;
			}
			if (workNo == 0 && stano == 0){
			continue;
			}
			if (!staProtocol.isPakMk()){
			continue;
			}
			// News.warn("扫码入库失败，{}入库站因{}异常，托盘已被退回", inSta.getStaNo(), errMsg);
			staProtocol.setWorkNo(workNo);
			staProtocol.setStaNo(inSta.getStaNo());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			TaskWrk taskWrk = taskWrkMapper.selectByWrkNo(Integer.valueOf(workNo));
			if (taskWrk != null) {
			taskWrk.setMemo(errMsg);//将错误码存入备注字段进行展示
			taskWrk.setModiTime(new Date());
			taskWrkMapper.updateById(taskWrk);
			}
			continue;
			}
			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk() && (workNo == 9991 )
			&& staProtocol.isPakMk()) {
			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode) && !barcode.equals("99999999")) {
			// 请求wms接口，获取工作号和目标库位
			ToWmsDTO toWmsDTO = new ToWmsDTO(barcode,staProtocol.getSiteId(),staProtocol.isHigh() ? 2 : 1);
			TaskWrk taskWrk1=taskWrkService.selectOne(new EntityWrapper<TaskWrk>().eq("barcode",barcode));
			if(!Cools.isEmpty(taskWrk1)){
			log.info("托盘码："+barcode+"任务档存在");
			if (taskWrk1.getIoType()==1 && taskWrk1.getStartPoint().equals(staProtocol.getSiteId().toString())){
			StaDesc staDesc = staDescService.selectOne(new EntityWrapper<StaDesc>()
			.eq("crn_no", taskWrk1.getCrnNo()).eq("type_no",1).eq("stn_no",staProtocol.getSiteId()));
			if (Cools.isEmpty(staDesc)){
			log.info("托盘码："+barcode+"任务档存在");
			return;
			}else {
			staProtocol.setWorkNo(taskWrk1.getWrkNo());
			staProtocol.setStaNo(staDesc.getCrnStn());
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			}
			}
			return;
			}
			HashMap<String, Object> headParam = new HashMap<>();
			headParam.put("Content-Type","application/json");
			String response;
			try{
			response = new HttpHandler.Builder()
			// .setHeaders(headParam)
			.setUri(wmsUrl)
			.setPath(inboundTaskApplyPath)
			.setJson(JSON.toJSONString(toWmsDTO))
			.build()
			.doPost();
			}catch (Exception e){
			log.error("请求入库调用接口失败");
			log.error("异常信息打印："+e);
			try{
			BasDevp basDevp = basDevpService.selectById(inSta.getStaNo());
			if (Cools.isEmpty(basDevp)){
			log.error("站点号异常"+inSta.getStaNo());
			} else if (basDevp.getStaErr()!=0){
			basDevp.setStaErr(2);
			basDevpService.updateById(basDevp);
			}
			}catch (Exception e1){
			// 退回
			log.error("扫码检测程序异常"+inSta.getStaNo()+"异常信息"+e1);
			}
			staProtocol.setWorkNo(9999);
			staProtocol.setStaNo(inSta.getStaNo());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// TaskWrk taskWrk = taskWrkMapper.selectByWrkNo(Integer.valueOf(workNo));
			// if (taskWrk != null) {
			// taskWrk.setMemo(errMsg);//将错误码存入备注字段进行展示
			// taskWrkMapper.updateById(taskWrk);
			// }
			continue;
			}

			JSONObject jsonObject = JSON.parseObject(response);
			apiLogService.save("wms请求入库货位接口"
			,wmsUrl+inboundTaskApplyPath
			,null
			,"127.0.0.1"
			,JSON.toJSONString(toWmsDTO)
			,response
			,true
			);
			log.info("入库请求参数{}" + JSON.toJSONString(toWmsDTO));
			log.info("入库请求返回参数{}" + JSON.toJSONString(response));
			if (jsonObject.getInteger("code").equals(200) && !Cools.isEmpty(jsonObject.get("data").toString())) {
			GetWmsDto getWmsDto = JSON.parseObject(jsonObject.get("data").toString(), GetWmsDto.class);
			try{
			BasDevp basDevp = basDevpService.selectById(inSta.getStaNo());
			if (Cools.isEmpty(basDevp)){
			log.error("站点号异常1"+inSta.getStaNo());
			throw new CoolException("站点号异常1,未查询到站点信息"+inSta.getStaNo());
			}
			Integer staNoCrnNo = Utils.StaNoCrnNo(inSta.getStaNo());
			if (staNoCrnNo==0){
			basDevp.setStaErr(1);
			basDevpService.updateById(basDevp);
			log.error("站点号异常2"+inSta.getStaNo());
			throw new CoolException("站点号异常2,站点号不存在"+inSta.getStaNo());
			}else {
			LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
			.eq("crn_no", staNoCrnNo.longValue())
			.eq("loc_no", getWmsDto.getLocNo()));
			if (Cools.isEmpty(locMast)){
			basDevp.setStaErr(1);
			basDevpService.updateById(basDevp);
			log.error("站点号异常3"+inSta.getStaNo());
			throw new CoolException("站点号异常3：此巷道不存在目标库位"+inSta.getStaNo());
			}
			}
			} catch (Exception e){
			// log.error("扫码检测程序异常"+inSta.getStaNo()+"异常信息"+e);
			// 退回
			log.error("扫码检测程序异常"+inSta.getStaNo()+errMsg);
			log.error("扫码检测程序异常,异常信息"+e);

			staProtocol.setWorkNo(9999);
			staProtocol.setStaNo(inSta.getStaNo());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// TaskWrk taskWrk = taskWrkMapper.selectByWrkNo(Integer.valueOf(workNo));
			// if (taskWrk != null) {
			// taskWrk.setMemo(errMsg);//将错误码存入备注字段进行展示
			// taskWrkMapper.updateById(taskWrk);
			// }
			continue;
			}
			//查看该库位是否为空库位
			LocMast locMast=locMastService.selectOne(new EntityWrapper<LocMast>()
			.eq("loc_sts","O")
			.eq("loc_no",getWmsDto.getLocNo()));
			if(Cools.isEmpty(locMast)){
			try{
			HashMap<String, Object> headParam1 = new HashMap<>();
			headParam1.put("taskNo",getWmsDto.getTaskNo());
			headParam1.put("status",6);
			headParam1.put("ioType",1);
			headParam1.put("barcode",barcode);
			String response2;
			response2 = new HttpHandler.Builder()
			// .setHeaders(headParam)
			.setUri(wmsUrl)
			.setPath(taskStatusFeedbackPath)
			.setJson(JSON.toJSONString(headParam1))
			.build()
			.doPost();
			JSONObject jsonObject1 = JSON.parseObject(response2);
			apiLogService.save("wcs派发库位==》不为空《==上报wms"
			,wmsUrl+taskStatusFeedbackPath
			,null
			,"127.0.0.1"
			,JSON.toJSONString(headParam1)
			,response
			,true
			);
			}catch (Exception e){
			log.error("wcs派发库位==》不为空《==上报wms", getWmsDto.getWrkNo());
			throw new CoolException("wcs派发入库任务上报wms失败,派发库位==》不为空《==，异常信息："+e);
			}
			}

			// 创新一个入库工作档
			TaskWrk taskWrk = taskWrkService.selectByTaskNo(getWmsDto.getWrkNo());
			if(Cools.isEmpty(taskWrk)) {
			taskWrk = createTask(getWmsDto,barcode);
			if (Cools.isEmpty(taskWrk)){
			log.error("库位异常，库位号：{}", getWmsDto.getTargetLocationCode());
			}else {
			taskWrkService.insert(taskWrk);
			StaDesc staDesc = staDescService.selectOne(new EntityWrapper<StaDesc>()
			.eq("crn_no", taskWrk.getCrnNo()).eq("type_no",1).eq("stn_no",staProtocol.getSiteId()));
			staProtocol.setWorkNo(taskWrk.getWrkNo());
			staProtocol.setStaNo(staDesc.getCrnStn());
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			}
			}

			}else {
			continue;
			}

			} else {
			// 退回
			log.error("扫码入库失败，{}入库站因{}异常，托盘已被退回", inSta.getStaNo(), errMsg);

			staProtocol.setWorkNo(9999);
			staProtocol.setStaNo(inSta.getStaNo());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			TaskWrk taskWrk = taskWrkMapper.selectByWrkNo(Integer.valueOf(workNo));
			if (taskWrk != null) {
			taskWrk.setMemo(errMsg);//将错误码存入备注字段进行展示
			taskWrk.setModiTime(new Date());
			taskWrkMapper.updateById(taskWrk);
			}
			}
			}


			}


			}
			}

			}

			/**
			* 拣料、并板、盘点再入库
			*/
			public synchronized void stnToCrnStnPick(){
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历拣料入库口
			for (DevpSlave.Sta pickSta : devp.getPickSta()) {
			// // 获取条码扫描仪信息
			// BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
			// if (barcodeThread == null) {
			// continue;
			// }
			// String barcode = barcodeThread.getBarcode();
			// if(!Cools.isEmpty(barcode)) {
			// log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			// if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			// continue;
			// }
			// } else {
			// continue;
			// }

			// 获取拣料入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(pickSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.isPakMk()){
			// WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
			if (wrkMast == null) {
			// 无拣料数据
			continue;
			}
			if ((wrkMast.getIoType() != 103 && wrkMast.getIoType() != 104 && wrkMast.getIoType() != 107)
			\|\| Cools.isEmpty(wrkMast.getStaNo()) \|\| Cools.isEmpty(wrkMast.getSourceStaNo()) ) {
			continue;
			}

			// 拣、盘、并作业站转换
			// int stnNo = 0;
			// if (wrkMast.getStaNo() == 109) {
			// stnNo = 127;
			// } else if (wrkMast.getStaNo() == 113) {
			// stnNo = 128;
			// } else {
			// log.error("{}号任务数据异常！", wrkMast.getWrkNo());
			// }
			// 获取目标站
			Wrapper<StaDesc> wrapper = new EntityWrapper<StaDesc>()
			.eq("type_no", wrkMast.getIoType() - 50)
			.eq("stn_no", pickSta.getStaNo()) // 作业站点 = 拣料出库的目标站
			.eq("crn_no", wrkMast.getCrnNo()); // 堆垛机号
			StaDesc staDesc = staDescService.selectOne(wrapper);
			if (Cools.isEmpty(staDesc)) {
			log.error("入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
			continue;
			}

			try {
			// 保存工作明细档历史档
			if (wrkMastMapper.saveWrkDetlLog(wrkMast.getWrkNo()) == 0) {
			throw new CoolException("保存工作明细档历史档失败");
			}
			// 保存工作主档历史档
			if (wrkMastMapper.saveWrkMastLog(wrkMast.getWrkNo()) == 0) {
			throw new CoolException("保存工作主档历史档失败");
			}

			Date now = new Date();
			// 堆垛机站点(目标站)
			Integer staNo = staDesc.getCrnStn();
			// 更新工作档数据状态
			wrkMast.setIoTime(now);
			wrkMast.setIoType(wrkMast.getIoType() - 50); // 入出库类型: 103->53,104->54,107->57
			wrkMast.setWrkSts(2L); // 工作状态: 2.设备上走
			wrkMast.setSourceStaNo(wrkMast.getStaNo()); // 源站
			wrkMast.setStaNo(staNo); // 目标站
			wrkMast.setLocNo(wrkMast.getSourceLocNo()); // 目标库位 = 出库时的源库位
			wrkMast.setSourceLocNo(""); // 源库位清空
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("更新工作档数据状态失败");
			}
			// 更新明细档io_time (历史档关联使用）
			wrkDetlService.updateIoTime(wrkMast.getWrkNo(), now);
			// 修改库位状态 Q.拣料/盘点/并板再入库
			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			locMast.setLocSts("Q");
			locMast.setModiTime(new Date());
			if (!locMastService.updateById(locMast)) {
			throw new CoolException("修改库位状态失败");
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			continue;
			}

			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}

			}

			}

			} catch (Exception e) {
			log.error("generateStoreWrkFile e", e);
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}

			/**
			* 堆垛机站出库到出库站
			*/
			@Async
			public void crnStnToOutStn() {
			for (CrnSlave crnSlave : slaveProperties.getCrn()) {
			// 遍历堆垛机出库站
			for (CrnSlave.CrnStn crnStn : crnSlave.getCrnOutStn()) {
			// 获取堆垛机出库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing() && staProtocol.isLoading() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getStaNo() == null)) {
			// 查询工作档
			WrkMast wrkMast = wrkMastMapper.selectPakOutStep2(staProtocol.getSiteId());
			if (wrkMast == null) {
			continue;
			}
			// 判断工作档条件
			if (wrkMast.getIoType() < 100 \|\| wrkMast.getStaNo() == null \|\| wrkMast.getSourceStaNo() == null) {
			continue;
			}
			// 判断吊车是否实际已完成，且电脑状态在move中，以备电脑进行更新工作档
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, wrkMast.getCrnNo());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol.statusType == CrnStatusType.FETCHING \|\| crnProtocol.statusType == CrnStatusType.PUTTING) {
			// 移动中
			continue;
			}
			// 判断堆垛机状态等待确认
			if (crnProtocol.modeType == CrnModeType.AUTO && crnProtocol.getTaskNo().equals(wrkMast.getWrkNo().shortValue())
			&& crnProtocol.statusType == CrnStatusType.WAITING
			&& crnProtocol.forkPosType == CrnForkPosType.HOME) {

			// 命令下发区 --------------------------------------------------------------------------

			// 下发站点信息
			staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			if (!MessageQueue.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol))) {
			List<StaDesc> staDescs = staDescMapper.selectList(new EntityWrapper<StaDesc>().eq("crn_no", crnSlave.getId()).eq("crn_stn", crnStn.getStaNo()));
			for (StaDesc staDesc : staDescs){
			try{
			// 获取堆垛机出库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			continue;
			}

			// 更新工作档状态为14失败
			wrkMast.setWrkSts(14L);
			wrkMast.setCrnEndTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) != 0) {
			// 复位堆垛机
			crnThread.setResetFlag(true);
			} else {
			log.error("更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			staProtocol = staProtocol.clone();
			}

			if (staProtocol.isAutoing() && staProtocol.isLoading() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getStaNo() == 0)) {
			// 查询工作档
			TaskWrk taskWrk = taskWrkMapper.selectCrnStaWorking(crnSlave.getId(), staDesc.getStnNo().toString());
			if (taskWrk == null) {
			continue;
			}
			log.info("下发输送线任务：taskWrk:"+JSON.toJSONString(taskWrk));
			// R r = siteController.siteDetlUpdate(Integer.valueOf(taskWrk.getTargetPoint()), taskWrk.getWrkNo().shortValue(), (short) 0, "Y", false, false);
			staProtocol.setWorkNo(taskWrk.getWrkNo());
			staProtocol.setStaNo(staDesc.getCrnStn());
			boolean offer = false;
			try{
			offer = MessageQueue.offer(SlaveType.Devp, 1, new Task(2, staProtocol));
			}catch (Exception e){
			log.error("下发输送线任务失败：异常:"+e);
			log.error("下发输送线任务失败：异常:offer:"+offer);
			}
			// JSONObject jsonObject = JSON.parseObject(JSON.toJSONString(r));
			if (offer){
			log.info("下发输送线任务成功：taskWrk:"+JSON.toJSONString(taskWrk));
			Date now = new Date();
			taskWrk.setStatus(5);
			taskWrk.setWrkSts(14);
			taskWrk.setModiTime(now);
			taskWrk.setCompleteTime(now);
			taskWrkService.updateById(taskWrk);
			}else {
			log.error("下发输送线任务失败：taskWrk:"+JSON.toJSONString(taskWrk));
			// log.error("下发输送线任务失败：异常信息:"+JSON.toJSONString(r));
			}
			}
			}catch (Exception e){
			log.error("出库到出库站异常:异常信息："+e);
			}

			}

			}
			}
			}
			@@ -505,7 +435,7 @@
			/**
			* 入出库 ===>> 堆垛机入出库作业下发
			*/
			public synchronized void crnIoExecute(){
			public synchronized void crnIoExecute() throws IOException {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			@@ -517,10 +447,8 @@
			continue;
			}

			//堆垛机回原点任务中
			if(crnThread.isBackHpFlag()){
			continue;
			}
			// 库位移转
			this.locToLoc(crn, crnProtocol);

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO
			@@ -546,198 +474,153 @@
			}
			}
			}
			// 库位移转
			this.locToLoc(crn, crnProtocol);
			// this.crnRebackHp(crnProtocol, crnThread);

			}
			}

			/**
			* 回原点，堆垛机没有执行中任务，设备存在入库任务时叫回原点
			*/
			public synchronized void crnRebackHp(CrnProtocol crnProtocol, CrnThread crnThread){
			// for (CrnSlave crn : slaveProperties.getCrn()) {
			// // 获取堆垛机信息
			// CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			// CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			// if (crnProtocol == null) {
			// continue;
			// }
			// BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			// if (basCrnp == null) {
			// log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			// continue;
			// }
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if(crnProtocol.getBay() ==1 && crnProtocol.getLevel()==1){
			return;
			}

			// 已经存在吊车执行任务时，则过滤3,12
			if (wrkMastMapper.selectWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//堆垛机有执行中任务，过滤3,4,11,12
			if (wrkMastMapper.selectCrnWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//输送线没有入库任务，过滤2
			if (wrkMastMapper.selectDevWorking(crnProtocol.getCrnNo()) == null) {
			return;
			}
			log.info("堆垛机召回原点==>>" + crnProtocol.getCrnNo() + "号堆垛机有入库任务,召回原点");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式: 回原点
			crnCommand.setSourcePosX((short) 0); // 源库位排
			crnCommand.setSourcePosY((short) 0); // 源库位列
			crnCommand.setSourcePosZ((short) 0); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机回原点命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			crnThread.setBackHpFlag(true);
			}
			// }
			}

			/**
			* 入库 ===>> 堆垛机站到库位
			*/
			public void crnStnToLoc(CrnSlave slave, CrnProtocol crnProtocol){
			public void crnStnToLoc(CrnSlave slave, CrnProtocol crnProtocol) throws IOException {
			for (CrnSlave.CrnStn crnStn : slave.getCrnInStn()) {
			boolean flag = false;
			// 获取堆垛机入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			log.error("入库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			continue;
			}
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.getWorkNo() > 0 && staProtocol.isInEnable()
			&& staDetl.getCanining()!=null && staDetl.getCanining().equals("Y")) {
			flag = true;
			}
			if (!flag) {
			continue;
			}
			// 获取工作状态为2（设备上走）的入库工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep2(slave.getId(), staProtocol.getWorkNo().intValue(), crnStn.getStaNo());
			if(null == wrkMast) {
			// log.error("查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
			continue;
			}
			// 获取库位信息
			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			if (locMast == null) {
			log.error("查询库存无数据--库位号{}", wrkMast.getLocNo());
			continue;
			}
			if (!locMast.getLocSts().equals("S") && !locMast.getLocSts().equals("Q")) {
			log.error("入库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), locMast.getLocSts());
			continue;
			}

			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			continue;
			}

			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			continue;
			}

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			}

			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// 此标记避免多次执行移库任务
			if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())) {
			wrkMast.setUpdMk("Y");
			wrkMast.setIoPri(14D);
			wrkMastMapper.updateById(wrkMast);
			// 生成工作档,将浅库位移转到新的库位中
			moveLocForDeepLoc(slave, shallowLoc);
			// 生成工作档、改变浅库位的源库/目标库库位状态、下发堆垛机命令（立马执行)
			// moveLocForDeepLocPakin(slave, shallowLoc, wrkMast);
			}
			List<StaDesc> staDescs = staDescMapper.selectList(new EntityWrapper<StaDesc>().eq("crn_no", slave.getId()).eq("crn_stn", crnStn.getStaNo()));
			for (StaDesc staDesc : staDescs) {
			boolean flag = false;
			// 获取堆垛机入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			continue;
			} else if (shallowLoc.getLocSts().equals("Q")){
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts()==4) {
			continue;
			}
			} else {
			staProtocol = staProtocol.clone();
			}
			}
			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			log.error("入库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			continue;
			}
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.getWorkNo() > 0 && staProtocol.isInEnable()
			&& staDetl.getCanining()!=null && staDetl.getCanining().equals("Y")) {
			flag = true;
			}
			if (!flag) {
			continue;
			}

			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(crnStn.getRow().shortValue()); // 源库位排
			crnCommand.setSourcePosY(crnStn.getBay().shortValue()); // 源库位列
			crnCommand.setSourcePosZ(crnStn.getLev().shortValue()); // 源库位层
			crnCommand.setDestinationPosX(locMast.getRow1().shortValue()); // 目标库位排
			crnCommand.setDestinationPosY(locMast.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(locMast.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 获取工作状态为2（设备上走）的入库工作档
			TaskWrk taskWrk = taskWrkMapper.selectPakIn(slave.getId(), staProtocol.getWorkNo().intValue(), staDesc.getStnNo().toString());
			if(null == taskWrk) {
			continue;
			}

			// long startTime = System.currentTimeMillis();
			// while ((System.currentTimeMillis() - startTime) < COMMAND_TIMEOUT) {
			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			continue;
			}

			// 已经存在吊车执行任务时，则过滤
			if (taskWrkMapper.selectCrnWorking(slave.getId()) != null) {
			continue;
			}

			// int workNo = commonService.getWorkNo(WorkNoType.PAKIN.type);//获取入库工作号
			// taskWrk.setWrkNo(workNo);//工作号
			Date now = new Date();
			taskWrk.setStatus(TaskStatusType.DISTRIBUTE.id);//派发状态
			// taskWrk.setAssignTime(now);//派发时间
			taskWrk.setExecuteTime(now);
			taskWrk.setWrkSts(3);//工作状态 3.吊车入库
			taskWrk.setCrnNo(staDesc.getCrnNo());//堆垛机号
			taskWrk.setModiTime(now);
			taskWrk.setModiUser(9988L);

			// //取出命令
			// List<CommandInfo> commandInfos = commandInfoService.selectByTaskNo(taskWrk.getTaskNo());
			// Integer commandStep = taskWrk.getCommandStep();
			// if (commandInfos.isEmpty()) {
			// continue;//命令空
			// }
			// CommandInfo commandInfo = commandInfos.get(commandStep);
			// CommandPackage commandPackage = JSON.parseObject(commandInfo.getCommand(), CommandPackage.class);//取出命令报文
			// CrnCommand crnCommand = JSON.parseObject(commandPackage.getCommand().toString(), CrnCommand.class);
			//
			// if (true) {
			// break;
			// if (!MessageQueue.offer(SlaveType.Crn, taskWrk.getCrnNo(), new Task(2, crnCommand))) {
			// log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", taskWrk.getCrnNo(), JSON.toJSON(crnCommand));
			// } else {
			// // 修改工作档状态 2.设备上走 => 3.吊车入库中
			// Date now = new Date();
			// taskWrk.setWrkSts(3);
			// taskWrk.setModiTime(now);
			// if (taskWrkMapper.updateById(taskWrk) == 0) {
			// log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", taskWrk.getWrkNo());
			// }
			// //开始运行
			// String response = CrnStartRunning(taskWrk);
			// JSONObject jsonObject = JSON.parseObject(response);
			// if (jsonObject.getInteger("code").equals(200)) {
			//
			// try{
			// Thread.sleep(500);
			// }catch(Exception ignore){}
			// }else {
			// log.error("入库开始运行通讯失败,"+jsonObject.get("msg"));
			//
			// }
			// }

			// 修改工作档状态 2.设备上走 => 3.吊车入库中
			Date now = new Date();
			wrkMast.setWrkSts(3L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(staDesc.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo(taskWrk.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(crnStn.getRow().shortValue()); // 源库位列
			crnCommand.setSourcePosY(crnStn.getBay().shortValue()); // 源库位层
			crnCommand.setSourcePosZ(crnStn.getLev().shortValue()); // 源库位排
			crnCommand.setDestinationPosX(Utils.getRowShort(taskWrk.getTargetPoint())); // 目标库位列
			crnCommand.setDestinationPosY(Utils.getBayShort(taskWrk.getTargetPoint())); // 目标库位层
			crnCommand.setDestinationPosZ(Utils.getLevShort(taskWrk.getTargetPoint())); // 目标库位排
			crnCommand.setCommand((short)1);
			if (!CommandUtils.offer(SlaveType.Crn, taskWrk.getCrnNo(), new Task(2, crnCommand),false)) {
			log.error("堆垛机命令生成失败，堆垛机号={}，任务数据={}", taskWrk.getCrnNo(), JSON.toJSON(crnCommand));
			throw new CoolException("堆垛机命令生成失败");
			}else{
			try{
			taskWrkService.updateById(taskWrk);
			}catch (Exception e){
			log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", taskWrk.getWrkNo());
			log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，异常："+e);
			}
			try{
			HashMap<String, Object> headParam = new HashMap<>();
			headParam.put("taskNo",taskWrk.getTaskNo());
			headParam.put("status",taskWrk.getStatus());
			headParam.put("ioType",taskWrk.getIoType());
			headParam.put("barcode",taskWrk.getBarcode());
			String response;
			response = new HttpHandler.Builder()
			// .setHeaders(headParam)
			.setUri(wmsUrl)
			.setPath(taskStatusFeedbackPath)
			.setJson(JSON.toJSONString(headParam))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			apiLogService.save("wcs派发入库任务上报wms"
			,wmsUrl+taskStatusFeedbackPath
			,null
			,"127.0.0.1"
			,JSON.toJSONString(headParam)
			,response
			,true
			);
			} catch (Exception e){
			log.error("wcs派发入库任务上报wms失败", JSON.toJSONString(taskWrk));
			// throw new CoolException("wcs派发入库任务上报wms失败");
			}

			}
			}

			// return;
			}
			}

			@@ -746,313 +629,220 @@
			* 2022-06-09 TQS修改，查询工作档LIST，遍历下发，防止第一个任务堵塞出库
			*/
			public void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
			List<TaskWrk> taskWrksInitial = taskWrkMapper.selectPakOut(slave.getId(), null);
			if (taskWrksInitial.size()==0){
			return;
			}
			for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// 获取工作状态为11（生成出库ID）的出库工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			List<WrkMast> wrkMasts = wrkMastMapper.selectPakOutStep11(slave.getId(), crnStn.getStaNo());
			for (WrkMast wrkMast : wrkMasts){
			if (wrkMast == null) {
			continue;
			}
			// 工作档状态判断
			if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null){
			log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			continue;
			}
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
			log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			continue;
			}
			// 获取堆垛机出库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			break;
			// continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }

			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			break;
			// continue;
			}
			// 判断堆垛机出库站状态
			if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
			&& staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// 命令下发区 --------------------------------------------------------------------------

			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			// continue;
			List<StaDesc> staDescs = staDescMapper.selectList(new EntityWrapper<StaDesc>().eq("crn_no", slave.getId()).eq("crn_stn", crnStn.getStaNo()));
			for (StaDesc staDesc : staDescs){
			// 获取工作状态为11（生成出库ID）的出库工作档
			List<TaskWrk> taskWrks = taskWrkMapper.selectPakOut(slave.getId(),staDesc.getStnNo().toString());
			for (TaskWrk taskWrk : taskWrks){
			if (taskWrk == null) {
			continue;
			}
			// 工作档状态判断
			if (taskWrk.getIoType() != 2 \|\| taskWrk.getTargetPoint() == null \|\| taskWrk.getStartPoint() == null) {
			log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", taskWrk.getWrkNo(), taskWrk.getStartPoint(), taskWrk.getIoType());
			continue;
			}
			// 获取堆垛机出库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			break;
			}

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			if(waitWrkMast.getWrkSts() == 11) {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			} else {

			}
			}
			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			// 此标记避免多次执行移库任务
			if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())
			\|\| Cools.isEmpty(waitWrkMast)) {
			wrkMast.setUpdMk("Y");
			wrkMastMapper.updateById(wrkMast);
			// 生成工作档,将浅库位移转到新的库位中
			moveLocForDeepLoc(slave, shallowLoc);
			}
			log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
			continue;
			} else if (shallowLoc.getLocSts().equals("Q") \|\| shallowLoc.getLocSts().equals("S")){
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts()==4) {
			continue;
			}
			}
			}

			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			break;
			// return;
			}

			// 1.堆垛机开始移动
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			crnCommand.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			staProtocol = staProtocol.clone();
			}

			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			break;
			}

			// 判断堆垛机出库站状态
			if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
			&& staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// 命令下发区 --------------------------------------------------------------------------

			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			break;
			}

			// 已经存在吊车执行任务时，则过滤
			if (taskWrkMapper.selectCrnWorking(slave.getId()) != null) {
			break;
			}

			CrnCommand command = new CrnCommand();
			command.setCrnNo(taskWrk.getCrnNo()); // 堆垛机编号
			command.setTaskNo(taskWrk.getWrkNo().shortValue()); // 工作号
			command.setAckFinish((short) 0); // 任务完成确认位
			command.setTaskMode(CrnTaskModeType.PAKIN); // 任务模式
			command.setSourcePosX(Utils.getRowShort(taskWrk.getStartPoint())); // 源库位排
			command.setSourcePosY(Utils.getBayShort(taskWrk.getStartPoint())); // 源库位列
			command.setSourcePosZ(Utils.getLevShort(taskWrk.getStartPoint())); // 源库位层
			command.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			command.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			command.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			command.setCommand((short)1);
			if (!CommandUtils.offer(SlaveType.Crn, taskWrk.getCrnNo(), new Task(2, command),false)) {
			log.error("堆垛机命令生成失败，堆垛机号={}，任务数据={}", taskWrk.getCrnNo(), JSON.toJSON(command));
			throw new CoolException("堆垛机命令生成失败");
			}else{
			try{
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			taskWrk.setWrkSts(12);
			taskWrk.setStatus(2);
			taskWrk.setModiTime(now);
			taskWrk.setExecuteTime(now);
			if (taskWrkMapper.updateById(taskWrk) == 0) {
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", taskWrk.getWrkNo());
			}
			}catch (Exception e){
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", taskWrk.getWrkNo());
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，异常："+e);
			}
			try{
			HashMap<String, Object> headParam = new HashMap<>();
			headParam.put("taskNo",taskWrk.getTaskNo());
			headParam.put("status",taskWrk.getStatus());
			headParam.put("ioType",taskWrk.getIoType());
			headParam.put("barcode",taskWrk.getBarcode());
			String response;
			response = new HttpHandler.Builder()
			// .setHeaders(headParam)
			.setUri(wmsUrl)
			.setPath(taskStatusFeedbackPath)
			.setJson(JSON.toJSONString(headParam))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			apiLogService.save("wcs派发出库任务上报wms"
			,wmsUrl+taskStatusFeedbackPath
			,null
			,"127.0.0.1"
			,JSON.toJSONString(headParam)
			,response
			,true
			);
			}catch (Exception e){
			log.error("wcs派发出库任务上报wms失败", JSON.toJSONString(taskWrk));
			// throw new CoolException("wcs派发入库任务上报wms失败");
			}
			}
			}
			}
			}
			}
			}

			// /**
			// * 出库 ===>> 库位到堆垛机站
			// */
			// public void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
			// for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// // 获取工作状态为11（生成出库ID）的出库工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			// if (wrkMast == null) {
			// continue;
			// }
			// // 工作档状态判断
			// if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null){
			// log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			// continue;
			// }
			// // 获取源库位信息
			// LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			// if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
			// log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			// continue;
			// }
			// // 获取堆垛机出库站信息
			// SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			// StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			// if (staProtocol == null) {
			// continue;
			// } else {
			// staProtocol = staProtocol.clone();
			// }
			//
			//// // 入出库模式判断
			//// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
			//
			//
			// // 查询站点详细信息
			// BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			// if (staDetl == null) {
			// log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			// continue;
			// }
			// // 判断堆垛机出库站状态
			// if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
			// && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// // 命令下发区 --------------------------------------------------------------------------
			//
			// // 堆垛机控制过滤
			// if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			// continue;
			// }
			//
			// // 双深库位且浅库位有货，则需先对浅库位进行库位移转
			// if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			// String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			// LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			// if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			// WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			// if (null == waitWrkMast) {
			// log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			// } else {
			// if(waitWrkMast.getWrkSts() == 11) {
			// waitWrkMast.setIoPri(15D);
			// waitWrkMast.setModiTime(new Date());
			// if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			// log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			// }
			// continue;
			// } else {
			//
			// }
			// }
			// } else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// // 此标记避免多次执行移库任务
			// if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())) {
			// wrkMast.setUpdMk("Y");
			// wrkMastMapper.updateById(wrkMast);
			// // 生成工作档、改变浅库位的源库/目标库库位状态、下发堆垛机命令（立马执行)
			// moveLocForDeepLoc(slave, shallowLoc);
			// }
			// log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
			// continue;
			// }
			// }
			//
			// // 已经存在吊车执行任务时，则过滤
			// if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			// return;
			// }
			//
			// // 1.堆垛机开始移动
			// CrnCommand crnCommand = new CrnCommand();
			// crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			// crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			// crnCommand.setAckFinish((short) 0); // 任务完成确认位
			// crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			// crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			// crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			// crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			// crnCommand.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			// crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			// crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			// if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			// log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			// } else {
			// // 修改工作档状态 11.生成出库ID => 12.吊车出库中
			// Date now = new Date();
			// wrkMast.setWrkSts(12L);
			// wrkMast.setCrnStrTime(now);
			// wrkMast.setModiTime(now);
			// if (wrkMastMapper.updateById(wrkMast) == 0) {
			// log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			// }
			// }
			// }
			// }
			// }

			/**
			* 库位移转
			*/
			public void locToLoc(CrnSlave slave, CrnProtocol crnProtocol){
			// 获取工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(slave.getId());
			if (null == wrkMast) {
			return;
			}
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (null == sourceSta) {
			log.error("工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			return;
			}
			// 源库位库位状态判断
			if (!sourceSta.getLocSts().equals("R") && !sourceSta.getLocSts().equals("S")) {
			return;
			}
			// 获取目标库位信息
			LocMast sta = locMastService.selectById(wrkMast.getLocNo());
			if (null == sta) {
			log.error("工作档库位移转失败，原因：检索目标库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			return;
			}
			// 获取堆垛机信息并判断是否可入出
			BasCrnp basCrnp = basCrnpService.selectById(slave.getId());
			if (!basCrnp.getInEnable().equals("Y") && !basCrnp.getOutEnable().equals("Y")) {
			return;
			}
			for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// 获取工作状态为11（生成出库ID）的移库工作档
			List<TaskWrk> taskWrks = taskWrkMapper.selectList(
			new EntityWrapper<TaskWrk>()
			.eq("CRN_NO",slave.getId())
			.eq("WRK_STS",11)
			.eq("IO_TYPE",3)
			.orderBy("IO_PRI",false));
			for (TaskWrk taskWrk : taskWrks){

			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			return;
			}
			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			// if (Utils.isDeepLoc(slaveProperties, taskWrk.getStartPoint())) {
			// String shallowLocNo = Utils.getShallowLoc(slaveProperties, taskWrk.getStartPoint());
			// TaskWrk hallowLocNoTask = taskWrkMapper.selectByStartPoint(shallowLocNo);
			// if (!Cools.isEmpty(hallowLocNoTask)){
			// continue;
			// }
			// }
			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			continue;
			}

			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			return;
			}
			// 已经存在吊车执行任务时，则过滤
			if (taskWrkMapper.selectCrnWorking(slave.getId()) != null) {
			continue;
			}

			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			crnCommand.setDestinationPosX(sta.getRow1().shortValue()); // 目标库位排
			crnCommand.setDestinationPosY(sta.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(sta.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			if (taskWrk == null \|\| Cools.isEmpty(taskWrk.getTargetPoint()) \|\| taskWrk.getTargetPoint().equals("") \|\| taskWrk.getWrkNo() == null) {
			continue;
			}
			// 工作档状态判断
			if (taskWrk.getIoType() != 3 \|\| taskWrk.getTargetPoint() == null) {
			log.error("查询工作档数据不符合条件--入出类型/目标库位号, 工作号={}，源库位={}，入出类型={}", taskWrk.getWrkNo(), taskWrk.getTargetPoint(), taskWrk.getIoType());
			continue;
			}

			// 命令下发区 --------------------------------------------------------------------------




			// 1.堆垛机开始移动
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			crnCommand.setTaskNo(taskWrk.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(Utils.getRowShort(taskWrk.getStartPoint())); // 源库位排
			crnCommand.setSourcePosY(Utils.getBayShort(taskWrk.getStartPoint())); // 源库位列
			crnCommand.setSourcePosZ(Utils.getLevShort(taskWrk.getStartPoint())); // 源库位层
			crnCommand.setDestinationPosX(Utils.getRowShort(taskWrk.getTargetPoint())); // 目标库位排
			crnCommand.setDestinationPosY(Utils.getBayShort(taskWrk.getTargetPoint())); // 目标库位列
			crnCommand.setDestinationPosZ(Utils.getLevShort(taskWrk.getTargetPoint())); // 目标库位层
			crnCommand.setCommand((short) 1);
			if (!CommandUtils.offer(SlaveType.Crn, taskWrk.getCrnNo(), new Task(2, crnCommand),false)) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", taskWrk.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			taskWrk.setWrkSts(12);
			taskWrk.setStatus(2);
			taskWrk.setModiTime(now);
			taskWrk.setExecuteTime(now);
			if (taskWrkMapper.updateById(taskWrk) == 0) {
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", taskWrk.getWrkNo());
			}
			try{
			HashMap<String, Object> headParam = new HashMap<>();
			headParam.put("taskNo",taskWrk.getTaskNo());
			headParam.put("status",taskWrk.getStatus());
			headParam.put("ioType",taskWrk.getIoType());
			headParam.put("barcode",taskWrk.getBarcode());
			String response;
			response = new HttpHandler.Builder()
			// .setHeaders(headParam)
			.setUri(wmsUrl)
			.setPath(taskStatusFeedbackPath)
			.setJson(JSON.toJSONString(headParam))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			apiLogService.save("wcs派发移库任务上报wms"
			,wmsUrl+taskStatusFeedbackPath
			,null
			,"127.0.0.1"
			,JSON.toJSONString(headParam)
			,response
			,true
			);
			}catch (Exception e){
			log.error("wcs派发移库库任务上报wms失败", taskWrk);
			// throw new CoolException("wcs派发移库库任务上报wms失败");
			}

			}
			return;
			}
			}

			@@ -1061,38 +851,105 @@
			/**
			* 执行对工作档的完成操作
			*/
			@Async
			public void storeFinished() {
			public void storeFinished() throws InterruptedException {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) { continue; }

			// 状态：等待确认并且任务完成位 = 1
			if (crnProtocol.statusType == CrnStatusType.WAITING && crnProtocol.getTaskNo() != 0) {
			if(crnProtocol.getTaskNo()==9999){
			// 堆垛机复位
			crnThread.setResetFlag(true);
			}else {
			// 获取入库待确认工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(crnProtocol.getTaskNo().intValue());
			if (wrkMast == null) {
			log.error("堆垛机处于等待确认且任务完成状态，但未找到工作档。堆垛机号={}，工作号={}", crn.getId(), crnProtocol.getTaskNo());
			continue;
			if (!Cools.isEmpty(crnProtocol.getTaskFinish()) && crnProtocol.getTaskFinish() == 0 && crnProtocol.statusType == CrnStatusType.WAITING && crnProtocol.getTaskNo() != 0) {
			//获取入库待确认工作档
			TaskWrk taskWrk = taskWrkMapper.selectCrnNoInWorking(crn.getId(),crnProtocol.getTaskNo().intValue());
			if (Cools.isEmpty(taskWrk)&&crnProtocol.getTaskNo() !=999) {
			log.error("堆垛机处于等待确认且任务完成状态，但未找到工作档。堆垛机号={}，工作号={}", crn.getId(), crnProtocol.getTaskNo());
			continue;
			}
			Thread.sleep(300);
			//确认完成信号
			CrnOperatorParam crnOperatorParam=new CrnOperatorParam();
			crnOperatorParam.setCrnNo(crn.getId());
			Date now = new Date();

			crnController.crnTaskComplete(crnOperatorParam);
			if(!Cools.isEmpty(taskWrk)){
			if(taskWrk.getIoType()==1 && taskWrk.getWrkSts()==3){
			taskWrk.setWrkSts(4);//入库完成
			taskWrk.setStatus(5);//完结
			//更新库位状态
			LocMast locMast = locMastService.selectByLocNo(taskWrk.getTargetPoint());
			locMast.setLocSts("F");//F.在库
			locMast.setBarcode(taskWrk.getBarcode());//托盘码
			locMast.setModiTime(now);
			locMast.setModiUser(9999L);
			locMastService.updateById(locMast);
			}else if(taskWrk.getIoType()==2&&taskWrk.getWrkSts()==12){
			taskWrk.setWrkSts(13);//出库完成
			taskWrk.setStatus(5);//完结
			//更新库位状态
			LocMast locMast = locMastService.selectByLocNo(taskWrk.getStartPoint());
			locMast.setLocSts("O");//O.空库位
			locMast.setBarcode("");//托盘码
			locMast.setModiTime(now);
			locMast.setModiUser(9999L);
			locMastService.updateById(locMast);
			}else if(taskWrk.getIoType()==3&&taskWrk.getWrkSts()==12){
			taskWrk.setWrkSts(4);//入库完成
			taskWrk.setStatus(5);//完结
			//更新库位状态
			LocMast locMast = locMastService.selectByLocNo(taskWrk.getTargetPoint());
			locMast.setLocSts("F");//F.在库
			locMast.setBarcode(taskWrk.getBarcode());//托盘码
			locMast.setModiTime(now);
			locMast.setModiUser(9999L);
			locMastService.updateById(locMast);

			LocMast locMast1 = locMastService.selectByLocNo(taskWrk.getStartPoint());
			locMast1.setLocSts("O");//O.空库位
			locMast1.setBarcode("");//托盘码
			locMast1.setModiTime(now);
			locMast1.setModiUser(9999L);
			locMastService.updateById(locMast1);
			}
			// 入库 + 库位转移 ==> 4.入库完成
			if (wrkMast.getWrkSts() == 3 \|\| (wrkMast.getWrkSts() == 12 && wrkMast.getIoType() == 11)) {
			wrkMast.setWrkSts(4L);
			} else {
			continue;
			}
			Date now = new Date();
			wrkMast.setCrnEndTime(now);
			wrkMast.setModiTime(now);
			// 修改成功后复位堆垛机
			if (wrkMastMapper.updateById(wrkMast) > 0) {
			// 堆垛机复位
			crnThread.setResetFlag(true);
			taskWrk.setModiTime(now);
			taskWrk.setCompleteTime(now);
			taskWrkService.updateById(taskWrk);


			try{
			HashMap<String, Object> headParam = new HashMap<>();
			headParam.put("taskNo",taskWrk.getTaskNo());
			headParam.put("status",taskWrk.getStatus());
			headParam.put("ioType",taskWrk.getIoType());
			headParam.put("barcode",taskWrk.getBarcode());
			String response;
			log.error("wcs完结任务上报wms==》", headParam);

			response = new HttpHandler.Builder()
			// .setHeaders(headParam)
			.setUri(wmsUrl)
			.setPath(taskStatusFeedbackPath)
			.setJson(JSON.toJSONString(headParam))
			.build()
			.doPost();
			log.error("wcs完结任务上报wms==》", response);

			// JSONObject jsonObject = JSON.parseObject(response);
			// log.error("wcs完结任务上报wms==》", jsonObject);

			apiLogService.save("wcs派发入库任务上报wms"
			,wmsUrl+taskStatusFeedbackPath
			,null
			,"127.0.0.1"
			,JSON.toJSONString(headParam)
			,response
			,true
			);
			}catch (Exception e){
			log.error("wcs完结任务上报wms失败", taskWrk);
			log.error("wcs完结任务上报wms失败,报错信息：", e);
			// throw new CoolException("wcs派发入库任务上报wms失败");
			}
			}

			@@ -1103,7 +960,6 @@
			/**
			* 堆垛机异常信息记录
			*/
			@Async
			public void recCrnErr(){
			Date now = new Date();
			for (CrnSlave crn : slaveProperties.getCrn()) {
			@@ -1113,7 +969,7 @@
			if (crnProtocol == null) {
			continue;
			}
			if (true) {
			if (false) {
			// if (crnProtocol.getModeType() != CrnModeType.STOP) {
			// 有任务
			if (crnProtocol.getTaskNo() != 0) {
			@@ -1165,7 +1021,7 @@
			}
			}
			}
			// 无任务
			// 无任务
			} else {
			BasErrLog latest = basErrLogService.findLatest(crn.getId());
			// 有异常
			@@ -1201,7 +1057,7 @@
			log.error("堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			}
			}
			// 无异常
			// 无异常
			} else {
			// 异常修复
			if (latest != null && latest.getStatus() == 1) {
			@@ -1219,695 +1075,101 @@
			}
			}


			// -------------------------------------------------------------------------------

			/**
			* 空栈板初始化入库,叉车入库站放货
			*/
			@Async
			public void storeEmptyPlt(){
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历空板入库口
			for (DevpSlave.Sta emptyInSta : devp.getEmptyInSta()) {
			// 获取空板入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(emptyInSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

			// 站点条件判断
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
			&& staProtocol.isEmptyMk() && (staProtocol.getWorkNo() > 9990 && staProtocol.getWorkNo() <= 9999) && staProtocol.isPakMk()) {

			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

			SearchLocParam param = new SearchLocParam();
			param.setIoType(10);
			param.setSourceStaNo(emptyInSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			.setJson(JSON.toJSONString(param))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			StartupDto dto = jsonObject.getObject("data", StartupDto.class);

			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(dto.getWorkNo().shortValue());
			staProtocol.setStaNo(dto.getStaNo().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			throw new CoolException("更新plc站点信息失败");
			}
			} else {
			log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl+"/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}




			// // 检索库位
			// LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			// StartupDto startupDto = commonService.getLocNo(1, 10, emptyInSta.getStaNo(), null, locTypeDto, 0);
			// // 工作号
			// int workNo = startupDto.getWorkNo();
			//
			// try {
			// // 插入工作主档
			// WrkMast wrkMast = new WrkMast();
			// wrkMast.setWrkNo(workNo);
			// wrkMast.setIoTime(new Date());
			// wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			// wrkMast.setIoType(10); // 入出库状态：10.空板入库
			// wrkMast.setIoPri(10D); // 优先级：10
			// wrkMast.setCrnNo(startupDto.getCrnNo());
			// wrkMast.setSourceStaNo(startupDto.getSourceStaNo());
			// wrkMast.setStaNo(startupDto.getStaNo());
			// wrkMast.setLocNo(startupDto.getLocNo());
			// wrkMast.setFullPlt("N"); // 满板
			// wrkMast.setPicking("N"); // 拣料
			// wrkMast.setExitMk("N"); // 退出
			// wrkMast.setEmptyMk("Y"); // 空板
			// wrkMast.setLinkMis("N");
			//// wrkMast.setCtnType(sourceStaNo.getCtnType()); // 容器类型
			// // 操作人员数据
			// wrkMast.setAppeTime(new Date());
			// wrkMast.setModiTime(new Date());
			// Integer insert = wrkMastMapper.insert(wrkMast);
			// if (insert == 0) {
			// throw new CoolException("保存工作档失败");
			// }
			// // 更新目标库位状态
			// LocMast locMast = locMastService.selectById(startupDto.getLocNo());
			// locMast.setLocSts("S"); // S.入库预约
			// locMast.setModiTime(new Date());
			// if (!locMastService.updateById(locMast)){
			// throw new CoolException("改变库位状态失败");
			// }
			// // 命令下发区 --------------------------------------------------------------------------
			//
			// // 更新站点信息且下发plc命令
			// staProtocol.setWorkNo((short) workNo);
			// staProtocol.setStaNo(startupDto.getStaNo().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// if (!result) {
			// throw new CoolException("更新plc站点信息失败");
			// }
			// } catch (Exception e) {
			// e.printStackTrace();
			// TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			// }

			}


			}
			private TaskWrk createTask(GetWmsDto dto, String barcode){
			String wcsLocNo = dto.getLocNo();
			if(Cools.isEmpty(wcsLocNo)){
			return null;
			}
			}

			/**
			* 出库 ===>> 工作档信息写入led显示器
			*/
			@Async
			public void ledExecute() {
			for (LedSlave led : slaveProperties.getLed()) {
			// 获取输送线plc线程
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, led.getDevpPlcId());
			// 命令集合
			List<LedCommand> commands = new ArrayList<>();
			// 工作档集合
			List<WrkMast> wrkMasts = new ArrayList<>();
			for (Integer staNo : led.getStaArr()) {
			// 获取叉车站点
			StaProtocol staProtocol = devpThread.getStation().get(staNo);
			if (null == staProtocol \|\| null == staProtocol.getWorkNo() \|\| 0 == staProtocol.getWorkNo() \|\| !staProtocol.isLoading()) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			// 获取工作档数据
			WrkMast wrkMast = wrkMastMapper.selectById(staProtocol.getWorkNo());
			// if (null == wrkMast \|\| wrkMast.getWrkSts() < 14 \|\| wrkMast.getIoType() < 100) { continue; }
			if (null == wrkMast) { continue; }
			wrkMasts.add(wrkMast);
			// 组装命令
			LedCommand ledCommand = new LedCommand();
			ledCommand.setWorkNo(wrkMast.getWrkNo());
			ledCommand.setIoType(wrkMast.getIoType());
			// 出库模式
			switch (wrkMast.getIoType()) {
			case 1:
			ledCommand.setTitle("全板入库");
			break;
			case 10:
			ledCommand.setTitle("空板入库");
			break;
			case 101:
			ledCommand.setTitle("全板出库");
			break;
			case 103:
			ledCommand.setTitle("拣料出库");
			break;
			case 104:
			ledCommand.setTitle("并板出库");
			break;
			case 107:
			ledCommand.setTitle("盘点出库");
			break;
			case 110:
			ledCommand.setTitle("空板出库");
			ledCommand.setEmptyMk(true);
			break;
			default:
			log.error("任务入出库类型错误！！！[工作号：{}] [入出库类型：{}]", wrkMast.getWrkNo(), wrkMast.getIoType());
			break;
			}
			ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
			ledCommand.setLocNo(wrkMast.getLocNo());
			ledCommand.setStaNo(wrkMast.getStaNo());
			// ledCommand.setSourceStaNo(wrkMast.getSourceStaNo());
			if (wrkMast.getIoType() != 110 && wrkMast.getIoType() != 10 ) {
			List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
			wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getAnfme())));
			}
			commands.add(ledCommand);
			}
			Set<Integer> workNos = wrkMasts.stream().map(WrkMast::getWrkNo).collect(Collectors.toSet());
			// 获取LED线程
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getId());
			// 相同工作号集合则过滤
			if (CollectionUtils.equals(ledThread.getWorkNos(), workNos)) {
			continue;
			}
			// 命令下发 -------------------------------------------------------------------------------
			if (!commands.isEmpty()) {
			if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(1, commands))) {
			log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			continue;
			} else {
			ledThread.setLedMk(false);
			}
			}

			try {
			// 修改主档led标记
			for (WrkMast wrkMast : wrkMasts) {
			wrkMast.setOveMk("Y");
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("更新工作档失败");
			}
			}

			// 更新线程当前工作号集合
			ledThread.setWorkNos(workNos);

			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			}
			}

			/**
			* 其他 ===>> LED显示器复位，显示默认信息
			*/
			@Async
			public void ledReset() {
			// for (LedSlave led : slaveProperties.getLed()) {
			// // 获取输送线plc线程
			// DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, led.getDevpPlcId());
			// // 命令集合
			// boolean reset = true;
			// for (Integer staNo : led.getStaArr()) {
			// // 获取叉车站点
			// StaProtocol staProtocol = devpThread.getStation().get(staNo);
			// if (staProtocol == null) {
			// continue;
			// } else {
			// staProtocol = staProtocol.clone();
			// }
			// if (staProtocol.getWorkNo() != 0) {
			// reset = false;
			// break;
			// }
			// }
			// // 获取led线程
			// LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getDevpPlcId());
			// // led显示默认内容
			// if (reset) {
			// if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(2, new ArrayList<>()))) {
			// log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			// }
			// }
			// }
			for (LedSlave led : slaveProperties.getLed()) {
			// 获取输送线plc线程
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, led.getDevpPlcId());
			// 命令集合
			boolean reset = true;
			for (Integer staNo : led.getStaArr()) {
			// 获取叉车站点
			StaProtocol staProtocol = devpThread.getStation().get(staNo);
			if (staProtocol == null) {
			continue;
			}
			if (staProtocol.getWorkNo() != 0 && staProtocol.isLoading()) {
			reset = false;
			break;
			}
			}
			// 获取led线程
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getId());
			// led显示默认内容
			if (reset && !ledThread.isLedMk()) {
			ledThread.setLedMk(true);
			if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(2, new ArrayList<>()))) {
			log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			} else {

			}
			}
			}
			}

			/**
			* 因双深库位阻塞，对浅库位进行移转（入库版)
			* tip：同步
			*/
			@Transactional
			public synchronized void moveLocForDeepLocPakin(CrnSlave crn, LocMast shallowLoc, WrkMast pakinWrkMast){
			LocMast loc = locMastService.selectById(pakinWrkMast.getLocNo());

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			Date now = new Date();
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(now);
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(15D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D")?"Y":"N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setCtnNo("Y"); // 入库阻塞库位移转标记
			wrkMast.setAppeTime(now);
			wrkMast.setModiTime(now);
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(now);
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(now);
			wrkDetl.setModiTime(now);
			if (!wrkDetlService.insert(wrkDetl)) {
			throw new CoolException("保存工作档明细失败");
			}
			TaskWrk taskWrk = new TaskWrk();
			int workNo1 = commonService.getWorkNo(WorkNoType.PAKIN.type);//获取入库工作号
			taskWrk.setTaskNo(dto.getWrkNo());//任务号
			taskWrk.setWrkNo(workNo1);
			taskWrk.setStatus(TaskStatusType.RECEIVE.id);//任务状态：接收
			taskWrk.setCreateTime(now);
			taskWrk.setAssignTime(now);
			taskWrk.setModiTime(now);
			taskWrk.setModiUser(5555L);
			taskWrk.setIoType(1);//任务类型
			taskWrk.setIoPri(Cools.isEmpty(dto.getTaskPriority()) ? 300 : Integer.parseInt(dto.getTaskPriority()));//优先级
			taskWrk.setBarcode(barcode);//条码
			LocMast locMast = locMastService.selectByLocNo(wcsLocNo);
			taskWrk.setCrnNo(locMast.getCrnNo());
			taskWrk.setTargetPoint(wcsLocNo);
			taskWrk.setStartPoint(dto.getStaNo().toString());
			if(taskWrk.getIoType() == 1){
			taskWrk.setWrkSts(2);
			if (!Cools.isEmpty(taskWrk.getTargetPoint())) {
			taskWrk.setOriginTargetPoint(taskWrk.getTargetPoint());
			}
			}
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("S"); // S.入库预约，入库阻塞库位移转
			shallowLoc.setModiTime(now);
			if (!locMastService.updateById(shallowLoc)){
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			return taskWrk;
			}

			public boolean deviceDetection(RgvSlave slave){
			RgvProtocol rgvProtocol = RgvStatusCache.getRgvStatus(slave.getId());
			if (rgvProtocol == null) {
			return false;
			}
			// // 修改目标库位状态
			// if (loc.getLocSts().equals("O")) {
			// loc.setLocSts("S"); // S.入库预约
			// loc.setModiTime(new Date());
			// if (!locMastService.updateById(loc)) {
			// throw new CoolException("更新目标库位状态失败");
			if (!rgvProtocol.getModeType().equals(RgvModeType.AUTO) \|\| rgvProtocol.getRgvPos().equals(0L)
			\|\| (!rgvProtocol.getStatusType().equals(RgvStatusType.IDLE) && !rgvProtocol.getStatusType().equals(RgvStatusType.ROAM))) {
			return false;
			}
			RgvProtocol rgvProtocolOther = RgvStatusCache.getRgvStatus(slave.getOtherId());
			if (rgvProtocolOther == null) {
			return false;
			}
			if (rgvProtocolOther.statusEnable){
			if (!rgvProtocolOther.getModeType().equals(RgvModeType.AUTO) \|\| rgvProtocolOther.getRgvPos().equals(0L)) {
			return false;
			}
			}
			return true;
			}

			public boolean rgvOtherStatusEnable(RgvSlave slave){
			RgvProtocol rgvProtocolOther = RgvStatusCache.getRgvStatus(slave.getOtherId());
			if (rgvProtocolOther == null) {
			return true;
			}
			if (rgvProtocolOther.statusEnable){
			// if (!rgvProtocolOther.getModeType().equals(RgvModeType.AUTO) \|\| rgvProtocolOther.getRgvPos().equals(0L)) {
			return true;
			// }
			// } else {
			// throw new CoolException("移转失败");
			// }
			wrkMast.setLocNo(shallowLoc.getLocNo());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("修改阻塞入库任务失败");
			}
			return false;
			}

			/**
			* 因双深库位阻塞，对浅库位进行移转（立即执行版)
			* tip：同步
			*/
			private void moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc){
			try {
			List<Integer> rows = locMastService.queryDistinctRow(crn.getId());
			LocMast loc = null;
			for (Integer row : rows) {
			if (Utils.isDeepLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());

			if (loc != null) {
			if (Utils.isDeepLoc(slaveProperties, loc.getLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, loc.getLocNo());
			LocMast shallowLoc1 = locMastService.selectById(shallowLocNo);
			if (!shallowLoc1.getLocSts().equals("O")) {
			loc = null;
			}
			}
			}
			if (null != loc) {
			break;
			}
			}
			}
			if (null == loc) {
			for (Integer row : rows) {
			if (Utils.isShallowLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
			private void sc(){

			if (null != loc) {//对应深库位非在库状态,不能移库
			String deepLoc = Utils.getDeepLoc(slaveProperties, loc.getLocNo());
			LocMast deepLoc1 = locMastService.selectById(deepLoc);
			if (!deepLoc1.getLocSts().equals("F") && !deepLoc1.getLocSts().equals("D")) {
			loc = null;
			}
			}

			if (null != loc) {
			break;
			}
			}
			}
			}

			if (null == loc) {
			log.error("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			throw new CoolException("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			}

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			if (!wrkDetlService.insert(wrkDetl)) {
			throw new CoolException("保存工作档明细失败");
			}
			}
			}
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("R"); // R.出库预约
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)) {
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			throw new CoolException("移转失败");
			}
			} catch (Exception e) {
			log.error("双深库位阻塞，对浅库位进行移转失败", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}

			/**
			* 堆垛机演示 ===>> 库位移转
			*/
			public synchronized void crnDemoOfLocMove1(){
			try {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			if (!crn.getDemo()) {
			continue;
			} // 必须为演示状态

			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			continue;
			}

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取移库工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
			if (null != wrkMast) {
			continue;
			}

			LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
			LocMast loc = locMastService.queryDemoLoc(crn.getId());
			if (null == sourceLoc \|\| null == loc) {
			continue;
			}

			String sourceLocNo = sourceLoc.getLocNo();
			String locNo = loc.getLocNo();

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(sourceLocNo); // 源库位
			wrkMast.setLocNo(locNo); // 目标库位
			wrkMast.setFullPlt("N"); // 满板：Y
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			// List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", sourceLocNo));
			// for (LocDetl locDetl : locDetls) {
			// WrkDetl wrkDetl = new WrkDetl();
			// wrkDetl.setWrkNo(workNo);
			// wrkDetl.setIoTime(new Date());
			// wrkDetl.setAnfme(locDetl.getAnfme());
			// VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			// wrkDetl.setAppeTime(new Date());
			// wrkDetl.setModiTime(new Date());
			// if (!wrkDetlService.insert(wrkDetl)) {
			// throw new CoolException("保存工作档明细失败");
			// }
			// }
			// 修改源库位状态
			if (sourceLoc.getLocSts().equals("D")) {
			sourceLoc.setLocSts("R"); // R.出库预约
			sourceLoc.setModiTime(new Date());
			if (!locMastService.updateById(sourceLoc)) {
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			throw new CoolException("移转失败");
			}

			}
			}
			} catch (Exception e) {
			log.error("堆垛机演示 ===>> 库位移转失败", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}

			/**
			* 堆垛机命令下发后，异步修改工作档状态
			*/
			public synchronized void crnIoWrkMast(){
			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			// 根据输送线plc遍历
			for (RgvSlave rgvSlave : slaveProperties.getRgv()) {
			if (!deviceDetection(rgvSlave)){
			continue;
			}
			Date now = new Date();
			// 堆垛机正在运行
			if (crnProtocol.getStatusType() != CrnStatusType.IDLE && crnProtocol.getTaskNo() != 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取工作档
			WrkMast wrkMast = wrkMastMapper.selectById(crnProtocol.getTaskNo());
			if (wrkMast == null) { continue; }
			// 入库
			if (wrkMast.getWrkSts() == 1 \|\| wrkMast.getWrkSts() == 2) {
			log.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			// 修改工作档状态 2.设备上走 => 3.吊车入库中
			wrkMast.setWrkSts(3L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			log.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			}
			// 出库、移库
			if (wrkMast.getWrkSts() == 11) {
			log.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			log.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			}
			RgvProtocol rgvProtocol = RgvStatusCache.getRgvStatus(rgvSlave.getId());

			RgvProtocol rgvProtocolOther = RgvStatusCache.getRgvStatus(rgvSlave.getOtherId());

			}
			//求出当前车可运行范围
			Long[] farthestPoint = new Long[]{0L,0L};
			if (!rgvProtocolOther.statusEnable){
			farthestPoint = new Long[]{0L,0L};
			} else {
			if (rgvProtocolOther.getStatusType().equals(RgvStatusType.IDLE)){

			}
			}

			/**
			* 入出库模式切换函数
			*/
			public void ioConvert() {
			try {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());

			for (DevpSlave.Sta inSta : devp.getInSta()) {
			if (inSta.getStaNo() == 2) {
			continue;
			}
			WrkMast pakout = wrkMastMapper.selectWorkingPakout(inSta.getStaNo());
			switch (inSta.getStaNo()) {
			case 203://1F
			if (pakout != null) {
			if (devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
			// 出库切换中
			devpThread.ioModeOf2F = IoModeType.PAKOUT_BOOTING;
			WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
			if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
			&& !devpThread.getStation().get(inSta.getStaNo()+1).isLoading()) {
			// 出库模式
			devpThread.ioModeOf2F = IoModeType.PAKOUT_MODE;
			}
			}
			} else {
			// 入库模式
			devpThread.ioModeOf2F = IoModeType.PAKIN_MODE;
			}
			break;
			}
			}

			}

			} catch (Exception e) {
			e.printStackTrace();
			}


			}

			public void outOfDevp() {
			List<WrkMast> wrkMasts = wrkMastMapper.selectPick();
			for (WrkMast wrkMast : wrkMasts) {
			if (basDevpService.selectCount(new EntityWrapper<BasDevp>().eq("wrk_no", wrkMast.getWrkNo())) == 0) {
			wrkMast.setCtnNo("Y");
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改{}工作档失败，ctn_no", wrkMast.getWrkNo());
			}
			}

			}
			}

			// 遍历入库口
			for (RgvSlave.RgvStn inSta : rgvSlave.getRgvInSStn()) {

			}
			}

			}

			}