#

zjj

2023-12-28 ac7d9da54887b5c4fdc2297c6eeddbb7e25ca5bd

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -27,18 +27,18 @@
import com.zy.core.cache.MessageQueue;
import com.zy.core.cache.SlaveConnection;
import com.zy.core.enums.*;
import com.zy.core.model.CrnSlave;
import com.zy.core.model.DevpSlave;
import com.zy.core.model.LedSlave;
import com.zy.core.model.Task;
import com.zy.core.model.*;
import com.zy.core.model.command.CrnCommand;
import com.zy.core.model.command.LedCommand;
import com.zy.core.model.command.RgvCommand;
import com.zy.core.model.protocol.CrnProtocol;
import com.zy.core.model.protocol.RgvProtocol;
import com.zy.core.model.protocol.StaProtocol;
import com.zy.core.properties.SlaveProperties;
import com.zy.core.thread.BarcodeThread;
import com.zy.core.thread.LedThread;
import com.zy.core.thread.SiemensDevpThread;
import com.zy.core.thread.ZyRgvThread;
import lombok.extern.slf4j.Slf4j;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.beans.factory.annotation.Value;
@@ -46,10 +46,7 @@
import org.springframework.transaction.annotation.Transactional;
import org.springframework.transaction.interceptor.TransactionAspectSupport;

import java.util.ArrayList;
import java.util.Date;
import java.util.List;
import java.util.Set;
import java.util.*;
import java.util.stream.Collectors;

/**
@@ -69,6 +66,8 @@
    private SlaveProperties slaveProperties;
    @Autowired
    private WrkMastMapper wrkMastMapper;
    @Autowired
    private WrkMastService wrkMastService;
    @Autowired
    private WrkDetlService wrkDetlService;
    @Autowired
@@ -102,37 +101,12 @@
            for (DevpSlave.Sta inSta : devp.getInSta()) {
                // 获取条码扫描仪信息
                BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());

                if (barcodeThread == null) {
                    continue;
                }
                String barcode = barcodeThread.getBarcode();


                //101站有3个扫码器，当0扫码器没有数据时，获取9、10两个扫码器数据
                    if((inSta.getStaNo().equals(101) || inSta.getStaNo().equals(104)) && ( "NoRead".equals(barcode) || Cools.isEmpty(barcode) )){
                    BarcodeThread barcodeThread1 = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode1());
                    if (barcodeThread1 != null) {
                        barcode = barcodeThread1.getBarcode();
                    }

                    if("NoRead".equals(barcode) || Cools.isEmpty(barcode)) {
                        BarcodeThread barcodeThread2 = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode2());
                        if (barcodeThread2 != null) {
                            barcode = barcodeThread2.getBarcode();

                        }
                    }
                }

                if (!Cools.isEmpty(barcode)) {
                    log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
                    if ("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        continue;
                    }
                } else {
                    continue;
                }

                // 获取入库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
@@ -142,51 +116,86 @@
                } else {
                    staProtocol = staProtocol.clone();
                }

                // 入出库模式判断
                if (inSta.getStaNo() == 101 && devpThread.ioModeOf1F1 == IoModeType.PAKOUT_MODE) {
                    continue;
                // 尺寸检测异常
                boolean back = false;
                String errMsg = "异常：";
                if (staProtocol.isFrontErr()) {
                    errMsg = errMsg+"前超限；";
                    back = true;
                }
                if (inSta.getStaNo() == 104 && devpThread.ioModeOf1F2 == IoModeType.PAKOUT_MODE) {
                    continue;
                if (staProtocol.isBackErr()) {
                    errMsg = errMsg+"后超限";
                    back = true;
                }
                if (inSta.getStaNo() == 111 && devpThread.ioModeOf1F3 == IoModeType.PAKOUT_MODE) {
                    continue;
                if (staProtocol.isHighErr()) {
                    errMsg = errMsg+"高超限";
                    back = true;
                }
                if (inSta.getStaNo() == 114 && devpThread.ioModeOf1F4 == IoModeType.PAKOUT_MODE) {
                    continue;
                if (staProtocol.isLeftErr()) {
                    errMsg = errMsg+"左超限";
                    back = true;
                }
                if (inSta.getStaNo() == 201 && devpThread.ioModeOf2F1 == IoModeType.PAKOUT_MODE) {
                    continue;
                if (staProtocol.isRightErr()) {
                    errMsg = errMsg+"右超限";
                    back = true;
                }
                if (inSta.getStaNo() == 204 && devpThread.ioModeOf2F2 == IoModeType.PAKOUT_MODE) {
                    continue;
                if (staProtocol.isWeightErr()) {
                    errMsg = errMsg+"超重";
                    back = true;
                }
                if (inSta.getStaNo() == 301 && devpThread.ioModeOf3F1 == IoModeType.PAKOUT_MODE) {
                    continue;
                if (staProtocol.isBarcodeErr()) {
                    errMsg = errMsg+"扫码失败";
                    back = true;
                }
                if (inSta.getStaNo() == 304 && devpThread.ioModeOf3F2 == IoModeType.PAKOUT_MODE) {
                // 退回
                if (back) {
                    // led 异常显示
                    LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
                    if (ledThread != null) {
                        MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errMsg));
                    }
                    continue;
                }

                if (!Cools.isEmpty(barcode)) {
                    log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
                    if ("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        continue;
                    }
                } else {
                    // led 异常显示
//                    LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
//                    if (ledThread != null) {
//                        String errorMsg = "扫码失败，请重试";
//                        MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
//                    }
                    continue;
                }
                // 判断是否满足入库条件
                if (staProtocol.isAutoing() && staProtocol.isLoading()
                if (staProtocol.isAutoing()
                        && staProtocol.isLoading()
                        && staProtocol.isInEnable()
                        && !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() > 9990)
                        && staProtocol.isPakMk()) {// && !Cools.isEmpty(barcode)) {
                        && !staProtocol.isEmptyMk()
                        && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() > 9990)
                        && staProtocol.isPakMk()) {

//                    if(Cools.isEmpty(barcode) || "NG".endsWith(barcode) || "NoRead".equals(barcode)) {
//                        log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
//                        //条码为空或者不符合，退库到172站点
                    if(Cools.isEmpty(barcode) || "NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
                        //条码为空或者不符合，退库到
                        LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
                        if (ledThread != null) {
                            String errorMsg = "扫码失败，请重试";
                            MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
                        }
//                        staProtocol.setWorkNo((short)9999);
//                        staProtocol.setStaNo((short)172);
//                        staProtocol.setStaNo((short)(staProtocol.getStaNo()-1));
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        if (!result) {
//                            throw new CoolException("更新plc站点信息失败");
//                        }
//                        continue;
//                    }
                        continue;
                    }

                    // 判断重复工作档
                    WrkMast wrkMast = new WrkMast();
@@ -197,8 +206,7 @@
                            continue;
                        }
                    }

//                    // 获取入库通知档
//                     获取入库通知档
//                    List<WaitPakin> waitPakins = waitPakinMapper.selectList(new EntityWrapper<WaitPakin>().eq("zpallet", barcode).eq("io_status", "N"));
//                    if (waitPakins.isEmpty()) {
//                        log.error("无此入库条码数据。条码号={}", barcode);
@@ -206,15 +214,12 @@
//                    }

                    try {

                        LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

                        SearchLocParam param = new SearchLocParam();
                        param.setBarcode(barcode);
                        param.setIoType(1);
                        param.setSourceStaNo(inSta.getStaNo());
                        param.setLocType1(locTypeDto.getLocType1());
                        param.setFull(staProtocol.isFull());
                        String response = new HttpHandler.Builder()
                                .setUri(wmsUrl)
                                .setPath("/rpc/pakin/loc/v1")
@@ -222,6 +227,7 @@
                                .build()
                                .doPost();
                        JSONObject jsonObject = JSON.parseObject(response);
                        LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
                        if (jsonObject.getInteger("code").equals(200)) {
                            StartupDto dto = jsonObject.getObject("data", StartupDto.class);

@@ -229,79 +235,37 @@
                            staProtocol.setWorkNo(dto.getWorkNo().shortValue());
                            staProtocol.setStaNo(dto.getStaNo().shortValue());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            ledThread.errorReset();
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            if (!result) {
                                throw new CoolException("更新plc站点信息失败");
                            }
                        } else if(jsonObject.getInteger("code").equals(700)) {
//                            staProtocol.setWorkNo((short) 9999);
//                            staProtocol.setStaNo(inSta.getBackSta().shortValue());
//                            devpThread.setPakMk(staProtocol.getSiteId(), false);
//                            MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                            // led 异常显示
//                            if (ledThread != null) {
//                                String errorMsg = barcode + "托盘识别异常，请先进行组托！";
//                                MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
//                            }
                            log.error(barcode + "托盘识别异常，请先进行组托！");
                            // led 异常显示
                            ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
                            if (ledThread != null) {
                                String errorMsg = barcode + "托盘识别异常，请先进行组托！";
                                MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
                            }
                        } else {
                            log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
                        }


//                        // 检索库位
//                        LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
//                        List<String> matNos = waitPakins.stream().map(WaitPakin::getMatnr).distinct().collect(Collectors.toList());
//                        StartupDto startupDto = commonService.getLocNo(1, 1, inSta.getStaNo(), matNos, locTypeDto, 0);
//                        // 工作号
//                        int workNo = startupDto.getWorkNo();
//                        // 插入工作明细档
//                        wrkDetlService.createWorkDetail(workNo, waitPakins, barcode);
//
//                        // 插入工作主档
//                        wrkMast = new WrkMast();
//                        wrkMast.setWrkNo(workNo);
//                        wrkMast.setIoTime(new Date());
//                        wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
//                        wrkMast.setIoType(1); // 入出库状态：1.入库
//                        wrkMast.setIoPri(10D); // 优先级：10
//                        wrkMast.setCrnNo(startupDto.getCrnNo());
//                        wrkMast.setSourceStaNo(startupDto.getSourceStaNo());
//                        wrkMast.setStaNo(startupDto.getStaNo());
//                        wrkMast.setLocNo(startupDto.getLocNo());
//                        wrkMast.setBarcode(barcode); // 托盘码
//                        wrkMast.setFullPlt("Y"); // 满板：Y
//                        wrkMast.setPicking("N"); // 拣料
//                        wrkMast.setExitMk("N"); // 退出
//                        wrkMast.setEmptyMk("N"); // 空板
//                        wrkMast.setLinkMis("N");
//                        // 操作人员数据
//                        wrkMast.setAppeTime(new Date());
//                        wrkMast.setModiTime(new Date());
//                        Integer insert = wrkMastMapper.insert(wrkMast);
//                        if (insert == 0) {
//                            throw new CoolException("保存工作档失败");
//                        }
//                        // 更新目标库位状态
//                        LocMast locMast = locMastService.selectById(startupDto.getLocNo());
//                        locMast.setLocSts("S"); // S.入库预约
//                        locMast.setModiTime(new Date());
//                        if (!locMastService.updateById(locMast)){
//                            throw new CoolException("改变库位状态失败");
//                        }
//                        // 将入库通知档修改为已启动
//                        if (wrkMastMapper.updateWaitPakInStep1(barcode) == 0) {
//                            throw new CoolException("修改入库通知档状态为已启动失败");
//                        }
//
//                        // 命令下发区 --------------------------------------------------------------------------
//
//                        // 更新站点信息 且 下发plc命令
//                        barcodeThread.setBarcode("");
//                        staProtocol.setWorkNo((short) workNo);
//                        staProtocol.setStaNo(startupDto.getStaNo().shortValue());
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        if (!result) {
//                            throw new CoolException("更新plc站点信息失败");
//                        }

                    } catch (Exception e) {
                        e.printStackTrace();
                        TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
                    }

                }


            }
        }
@@ -327,28 +291,10 @@
                }

//                // 入出库模式判断
                if (inSta.getStaNo() == 104 && devpThread.ioModeOf1F1 != IoModeType.PAKOUT_MODE) {
                if (inSta.getStaNo() == 101 && devpThread.ioModeOf1F1 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 101 && devpThread.ioModeOf1F2 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 114 && devpThread.ioModeOf1F3 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 111 && devpThread.ioModeOf1F4 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 204 && devpThread.ioModeOf2F1 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 201 && devpThread.ioModeOf2F2 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 301 && devpThread.ioModeOf3F1 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (inSta.getStaNo() == 304 && devpThread.ioModeOf3F2 != IoModeType.PAKOUT_MODE) {
                if (inSta.getStaNo() == 104 && devpThread.ioModeOf1F2 != IoModeType.PAKOUT_MODE) {
                    continue;
                }

@@ -397,40 +343,16 @@
            for (DevpSlave.Sta pickSta : devp.getPickSta()) {
                // 获取条码扫描仪信息
                BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());

                if (barcodeThread == null) {
                    continue;
                }
                String barcode = barcodeThread.getBarcode();


                //101站有3个扫码器，当0扫码器没有数据时，获取9、10两个扫码器数据
                if((pickSta.getStaNo().equals(101) || pickSta.getStaNo().equals(104)) && ( "NoRead".equals(barcode) || Cools.isEmpty(barcode) )){
                    BarcodeThread barcodeThread1 = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode1());
                    if (barcodeThread1 != null) {
                        barcode = barcodeThread1.getBarcode();
                    }

                    if("NoRead".equals(barcode) || Cools.isEmpty(barcode)) {
                        BarcodeThread barcodeThread2 = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode2());
                        if (barcodeThread2 != null) {
                            barcode = barcodeThread2.getBarcode();

                        }
                    }
//                    if("NoRead".equals(barcode) || Cools.isEmpty(barcode)) {
//                        barcode = "";
//                        continue;
//                    }
                }

                if (!Cools.isEmpty(barcode) && "NoRead".equals(barcode)) {
                if (!Cools.isEmpty(barcode)) {
                    log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
//                    if ("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
//                        continue;
//                    }
                } else {
                    continue;
                    if ("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        continue;
                    }
                }

                // 获取拣料入库站信息
@@ -442,12 +364,34 @@
                    staProtocol = staProtocol.clone();
                }

//                // 入出库模式判断
//                if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.isPakMk()) {
                if (staProtocol.isAutoing()
                        && staProtocol.isLoading()
                        && staProtocol.isInEnable()
                        && staProtocol.isPakMk()
                        && staProtocol.getWorkNo() == 9999) {
//                    WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
                    WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
                    LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());
                    if (barcode.equals("") || barcode.equals("99999999")) {
                        Integer led = pickSta.getLed();
                        if (ledThread != null) {
                            String errorMsg = "扫码异常，请重新入库！";
                            MessageQueue.offer(SlaveType.Led, pickSta.getLed(), new Task(3, errorMsg));
                        }
//                        // 更新站点信息 且 下发plc命令
                        staProtocol.setWorkNo((short)9999);
                        staProtocol.setStaNo((short)(staProtocol.getStaNo()-1));
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                        if (!result) {
                            log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
                        }
                        continue;
                    }

//                    WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
                    WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>().eq("barcode", barcode));

                    if (wrkMast == null) {
                        wrkMast = wrkMastMapper.selectPickStep(barcode);
                    }
@@ -459,16 +403,8 @@
                            || Cools.isEmpty(wrkMast.getStaNo()) || Cools.isEmpty(wrkMast.getSourceStaNo())) {
                        continue;
                    }
                    ledThread.errorReset();

                    // 拣、盘、并 作业站转换
//                    int stnNo = 0;
//                    if (wrkMast.getStaNo() == 109) {
//                        stnNo = 127;
//                    } else if (wrkMast.getStaNo() == 113) {
//                        stnNo = 128;
//                    } else {
//                        log.error("{}号任务数据异常！", wrkMast.getWrkNo());
//                    }
                    // 获取目标站
                    Wrapper<StaDesc> wrapper = new EntityWrapper<StaDesc>()
                            .eq("type_no", wrkMast.getIoType() - 50)
@@ -497,7 +433,19 @@
                        wrkMast.setIoTime(now);
                        wrkMast.setIoType(wrkMast.getIoType() - 50); // 入出库类型: 103->53,104->54,107->57
                        wrkMast.setWrkSts(2L); // 工作状态: 2.设备上走
                        wrkMast.setSourceStaNo(wrkMast.getStaNo()); // 源站

                        Integer sourceStaNo = 0;
                        switch (wrkMast.getStaNo()){
                            case 100:
                                sourceStaNo = 101;
                                break;
                            case 103:
                                sourceStaNo = 104;
                                break;
                        }

                        wrkMast.setSourceStaNo(sourceStaNo); // 源站
//                        wrkMast.setSourceStaNo(wrkMast.getStaNo()); // 源站
                        wrkMast.setStaNo(staNo); // 目标站
                        wrkMast.setLocNo(wrkMast.getSourceLocNo()); // 目标库位 = 出库时的源库位
                        wrkMast.setSourceLocNo(""); // 源库位清空
@@ -527,6 +475,8 @@
                    boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                    if (!result) {
                        log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
                    }else {
                        ledThread.errorReset();
                    }

                }
@@ -582,8 +532,13 @@
                            continue;
                        }

                        // 更新工作档状态为14失败
                        wrkMast.setWrkSts(14L);
                        if (crnStn.getStaNo() == 1016 || crnStn.getStaNo() == 1019) {
                            // 更新工作档状态为13.RGV搬运中
                            wrkMast.setWrkSts(13L);
                        }else {
                            // 更新工作档状态为14
                            wrkMast.setWrkSts(14L);
                        }
                        wrkMast.setCrnEndTime(new Date());
                        if (wrkMastMapper.updateById(wrkMast) != 0) {
                            // 复位堆垛机
@@ -851,6 +806,11 @@
            // 获取工作状态为11（生成出库ID）的出库工作档
//            WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
            List<WrkMast> wrkMasts = wrkMastMapper.selectPakOutStep11(slave.getId(), crnStn.getStaNo());
            //            获取工作状态为14的工作档
            WrkMast wrkMast1 = wrkMastMapper.selectPakOutStep14(slave.getId(), crnStn.getStaNo());
            if ( wrkMast1 !=null) {
                continue;
            }
            for (WrkMast wrkMast : wrkMasts) {
                if (wrkMast == null) {
                    continue;
@@ -874,32 +834,6 @@
//                    continue;
                } else {
                    staProtocol = staProtocol.clone();
                }

//            // 入出库模式判断
                if (wrkMast.getStaNo() == 100 && devpThread.ioModeOf1F1 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 103 && devpThread.ioModeOf1F2 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 110 && devpThread.ioModeOf1F3 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 113 && devpThread.ioModeOf1F4 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 200 && devpThread.ioModeOf2F1 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 203 && devpThread.ioModeOf2F2 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 300 && devpThread.ioModeOf3F1 != IoModeType.PAKOUT_MODE) {
                    continue;
                }
                if (wrkMast.getStaNo() == 303 && devpThread.ioModeOf3F2 != IoModeType.PAKOUT_MODE) {
                    continue;
                }

                // 查询站点详细信息
@@ -926,7 +860,7 @@
                        LocMast shallowLoc = locMastService.selectById(shallowLocNo);
                        // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用 直接搬！
                        if (shallowLoc.getLocSts().equals("P") || shallowLoc.getLocSts().equals("R")) {
                            WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                            WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
                            if (null == waitWrkMast) {
                                log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
                            } else {
@@ -957,8 +891,8 @@
                            log.error("{}任务出库失败，浅库位堵塞！浅库位号:{}", wrkMast.getWrkNo(), shallowLocNo);
                            continue;
                        } else if (shallowLoc.getLocSts().equals("Q") || shallowLoc.getLocSts().equals("S")) {
                            WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                            if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
                            WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
                            if (null != waitWrkMast && (waitWrkMast.getWrkSts() == 4 || waitWrkMast.getWrkSts() == 5)) {
                                continue;
                            }
                        }
@@ -1362,6 +1296,7 @@
                // 获取空板入库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
                StaProtocol staProtocol = devpThread.getStation().get(emptyInSta.getStaNo());
                LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, emptyInSta.getLed());
                if (staProtocol == null) {
                    continue;
                } else {
@@ -1370,9 +1305,15 @@

                // 站点条件判断
                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
                        && staProtocol.isEmptyMk() && (staProtocol.getWorkNo() > 9990
                        && staProtocol.isEmptyMk() && (staProtocol.getWorkNo() >= 9990
                        && staProtocol.getWorkNo() <= 9999) && staProtocol.isPakMk()) {

                    List<WrkMast> wrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
                            .eq("sta_no", emptyInSta.getStaNo())
                            .eq("io_type", 10)
                            .eq("wrk_sts", 2));
                    if (!Cools.isEmpty(wrkMasts)){
                        continue;
                    }
                    try {
                        LocTypeDto locTypeDto = new LocTypeDto(staProtocol);

@@ -1389,7 +1330,7 @@
                        JSONObject jsonObject = JSON.parseObject(response);
                        if (jsonObject.getInteger("code").equals(200)) {
                            StartupDto dto = jsonObject.getObject("data", StartupDto.class);

                            ledThread.errorReset();
                            // 更新站点信息 且 下发plc命令
                            staProtocol.setWorkNo(dto.getWorkNo().shortValue());
                            staProtocol.setStaNo(dto.getStaNo().shortValue());
@@ -1405,60 +1346,6 @@
                        e.printStackTrace();
                        TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
                    }


//                    // 检索库位
//                    LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
//                    StartupDto startupDto = commonService.getLocNo(1, 10, emptyInSta.getStaNo(), null, locTypeDto, 0);
//                    // 工作号
//                    int workNo = startupDto.getWorkNo();
//
//                    try {
//                        // 插入工作主档
//                        WrkMast wrkMast = new WrkMast();
//                        wrkMast.setWrkNo(workNo);
//                        wrkMast.setIoTime(new Date());
//                        wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
//                        wrkMast.setIoType(10); // 入出库状态：10.空板入库
//                        wrkMast.setIoPri(10D); // 优先级：10
//                        wrkMast.setCrnNo(startupDto.getCrnNo());
//                        wrkMast.setSourceStaNo(startupDto.getSourceStaNo());
//                        wrkMast.setStaNo(startupDto.getStaNo());
//                        wrkMast.setLocNo(startupDto.getLocNo());
//                        wrkMast.setFullPlt("N"); // 满板
//                        wrkMast.setPicking("N"); // 拣料
//                        wrkMast.setExitMk("N"); // 退出
//                        wrkMast.setEmptyMk("Y"); // 空板
//                        wrkMast.setLinkMis("N");
////                    wrkMast.setCtnType(sourceStaNo.getCtnType()); // 容器类型
//                        // 操作人员数据
//                        wrkMast.setAppeTime(new Date());
//                        wrkMast.setModiTime(new Date());
//                        Integer insert = wrkMastMapper.insert(wrkMast);
//                        if (insert == 0) {
//                            throw new CoolException("保存工作档失败");
//                        }
//                        // 更新目标库位状态
//                        LocMast locMast = locMastService.selectById(startupDto.getLocNo());
//                        locMast.setLocSts("S"); // S.入库预约
//                        locMast.setModiTime(new Date());
//                        if (!locMastService.updateById(locMast)){
//                            throw new CoolException("改变库位状态失败");
//                        }
//                        // 命令下发区 --------------------------------------------------------------------------
//
//                        // 更新站点信息 且 下发plc命令
//                        staProtocol.setWorkNo((short) workNo);
//                        staProtocol.setStaNo(startupDto.getStaNo().shortValue());
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        if (!result) {
//                            throw new CoolException("更新plc站点信息失败");
//                        }
//                    } catch (Exception e) {
//                        e.printStackTrace();
//                        TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
//                    }

                }

@@ -1518,6 +1405,7 @@
                }
                ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
                ledCommand.setStaNo(wrkMast.getStaNo());
                ledCommand.setBarcode(wrkMast.getBarcode());
                if (wrkMast.getIoType() != 110) {
                    List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
                    wrkDetls.forEach(wrkDetl -> {
@@ -1583,7 +1471,7 @@
                // 获取叉车站点
                StaProtocol staProtocol = devpThread.getStation().get(staNo);
                if (staProtocol == null) { continue; }
                if (staProtocol.getWorkNo() != 0) {
                if (staProtocol.getWorkNo() != 0 || staProtocol.isErr()) {
                    reset = false;
                    break;
                }
@@ -1593,7 +1481,7 @@
            // led显示默认内容
            if (reset) {
                if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(2, new ArrayList<>()))) {
                    News.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
                    News.error("{}号LED命令下发失败1565！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
                }
            }
        }
@@ -1818,8 +1706,11 @@
                    }

                    LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
                    LocMast loc = locMastService.queryDemoLoc(crn.getId());
                    if (null == sourceLoc || null == loc) {
                    if (null == sourceLoc ) {
                        continue;
                    }
                    LocMast loc = locMastService.queryDemoLoc0(crn.getId(),sourceLoc.getLocType1());
                    if ( null == loc) {
                        continue;
                    }

@@ -1877,6 +1768,111 @@
                    // 修改目标库位状态
                    if (loc.getLocSts().equals("O")) {
                        loc.setLocSts("S"); // S.入库预约
                        loc.setModiTime(new Date());
                        if (!locMastService.updateById(loc)) {
                            throw new CoolException("更新目标库位状态失败");
                        }
                    } else {
                        throw new CoolException("移转失败");
                    }

                }
            }
        } catch (Exception e) {
            log.error("堆垛机演示  ===>> 库位移转失败", e);
            e.printStackTrace();
            TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
        }
    }
    /**
     * 堆垛机演示  ===>> 所有库位轮询
     */
    public synchronized void crnDemoOfLocMove2() {
        try {
            for (CrnSlave crn : slaveProperties.getCrn()) {
                if (!crn.getDemo()) {
                    continue;
                }   // 必须为演示状态

                CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
                CrnProtocol crnProtocol = crnThread.getCrnProtocol();
                if (crnProtocol == null) {
                    continue;
                }

                // 只有当堆垛机空闲 并且 无任务时才继续执行
                if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
                    // 获取移库工作档信息
                    WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
                    if (null != wrkMast) {
                        continue;
                    }


                    LocMast sourceLoc = locMastService.queryDemoSourceLoc1(crn.getId());
                    if (null == sourceLoc ) {
                        continue;
                    }
                    LocMast loc = locMastService.queryDemoLoc2(crn.getId(),sourceLoc.getLocType1());
                    if ( null == loc) {
                        continue;
                    }

                    String sourceLocNo = sourceLoc.getLocNo();
                    String locNo = loc.getLocNo();

                    // 获取工作号
                    int workNo = commonService.getWorkNo(0);
                    // 保存工作档
                    wrkMast = new WrkMast();
                    wrkMast.setWrkNo(workNo);
                    wrkMast.setIoTime(new Date());
                    wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
                    wrkMast.setIoType(11); // 入出库状态： 11.库格移载
                    wrkMast.setIoPri(13D);
                    wrkMast.setCrnNo(crn.getId());
                    wrkMast.setSourceLocNo(sourceLocNo); // 源库位
                    wrkMast.setLocNo(locNo); // 目标库位
                    wrkMast.setFullPlt("N"); // 满板：Y
                    wrkMast.setPicking("N"); // 拣料
                    wrkMast.setExitMk("N"); // 退出
                    wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
                    wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
                    wrkMast.setLinkMis("N");
                    wrkMast.setAppeTime(new Date());
                    wrkMast.setModiTime(new Date());
                    int res = wrkMastMapper.insert(wrkMast);
                    if (res == 0) {
                        throw new CoolException("保存工作档失败");
                    }
                    // 工作档明细保存
//                List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", sourceLocNo));
//                for (LocDetl locDetl : locDetls) {
//                    WrkDetl wrkDetl = new WrkDetl();
//                    wrkDetl.setWrkNo(workNo);
//                    wrkDetl.setIoTime(new Date());
//                    wrkDetl.setAnfme(locDetl.getAnfme());
//                    VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
//                    wrkDetl.setAppeTime(new Date());
//                    wrkDetl.setModiTime(new Date());
//                    if (!wrkDetlService.insert(wrkDetl)) {
//                        throw new CoolException("保存工作档明细失败");
//                    }
//                }
                    // 修改源库位状态
                    if (sourceLoc.getLocSts().equals("D")) {
                        sourceLoc.setLocSts("R"); // R.出库预约
                        sourceLoc.setModiTime(new Date());
                        if (!locMastService.updateById(sourceLoc)) {
                            throw new CoolException("更新源库位状态失败");
                        }
                    } else {
                        throw new CoolException("源库位出库失败");
                    }
                    // 修改目标库位状态
                    if (loc.getLocSts().equals("O")) {
                        loc.setLocSts("S"); // S.入库预约
                        loc.setCtnKind(1);
                        loc.setModiTime(new Date());
                        if (!locMastService.updateById(loc)) {
                            throw new CoolException("更新目标库位状态失败");
@@ -1963,25 +1959,7 @@
                            staNo = 102;
                            break;
                        case 104:
                            staNo = 106;
                            break;
                        case 111:
                            staNo = 112;
                            break;
                        case 114:
                            staNo = 116;
                            break;
                        case 201:
                            staNo = 202;
                            break;
                        case 204:
                            staNo = 205;
                            break;
                        case 301:
                            staNo = 302;
                            break;
                        case 304:
                            staNo = 305;
                            staNo = 105;
                            break;
                    }
                    WrkMast pakout = wrkMastMapper.selectWorkingPakout(staNo);
@@ -2022,114 +2000,6 @@
                                devpThread.ioModeOf1F2 = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 111: // 1F3
                            if (pakout != null) {
                                if (devpThread.ioModeOf1F3 != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf1F3 = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() - 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() - 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf1F3 = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf1F3 = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 114: // 1F4
                            if (pakout != null) {
                                if (devpThread.ioModeOf1F4 != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf1F4 = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() - 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() - 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf1F4 = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf1F4 = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 201: // 2F1
                            if (pakout != null) {
                                if (devpThread.ioModeOf2F1 != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf2F1 = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() - 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() - 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf2F1 = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf2F1 = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 204: // 2F2
                            if (pakout != null) {
                                if (devpThread.ioModeOf2F2 != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf2F2 = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() - 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() - 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf2F2 = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf2F2 = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 301: // 3F1
                            if (pakout != null) {
                                if (devpThread.ioModeOf3F1 != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf3F1 = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() - 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() - 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf3F1 = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf3F1 = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 304: // 3F2
                            if (pakout != null) {
                                if (devpThread.ioModeOf3F2 != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf3F2 = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() - 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() - 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf3F2 = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf3F2 = IoModeType.PAKIN_MODE;
                            }
                            break;
                    }
                }

@@ -2142,56 +2012,397 @@

    }

    public synchronized void outOfDevp() {
        List<WrkMast> wrkMasts = wrkMastMapper.selectPick();
        for (WrkMast wrkMast : wrkMasts) {
            if (basDevpService.selectCount(new EntityWrapper<BasDevp>().eq("wrk_no", wrkMast.getWrkNo())) == 0) {
                wrkMast.setCtnNo("Y");
                if (wrkMastMapper.updateById(wrkMast) == 0) {
                    log.error("修改{}工作档失败，ctn_no", wrkMast.getWrkNo());
                }
    //RGV搬运
    public synchronized void rgvIoExecute() {
        for (RgvSlave slave : slaveProperties.getRgv()) {
            ZyRgvThread rgvThread = (ZyRgvThread) SlaveConnection.get(SlaveType.Rgv, slave.getId());
            if (rgvThread == null) {
                return;
            }

            RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
            if (rgvProtocol == null) {
                return;
            }

            // 判断RGV是否空闲
            if (rgvProtocol.getModeType() == RgvModeType.COMPUTER
                    && rgvProtocol.getStatusType() == RgvStatusType.IDLE) {
                // 如果最近一次是入库模式，则优先扫描出库站点
                if (rgvProtocol.getLastIo().equals("I")) {
                    this.rgvOutExecute(rgvThread, rgvProtocol);//出库
                    rgvProtocol.setLastIo("O");
                }else {
                    this.rgvInExecute(rgvThread, rgvProtocol);//入库
                    rgvProtocol.setLastIo("I");
                }

                //检查是否存在工位1任务超时没下发
                if (rgvProtocol.getTaskNo1() > 0 && rgvProtocol.getTaskNo2() == 0) {
                    if (System.currentTimeMillis() - rgvProtocol.getTask1SendTime() > (1000*60)) {
                        //工位1下发时间超过60s
                        RgvCommand rgvCommand = new RgvCommand();
                        rgvCommand.setRgvNo(rgvProtocol.getRgvNo());//RGV编号
                        rgvCommand.setCommand((short) 1);//工位1确认
                        if (!MessageQueue.offer(SlaveType.Rgv, rgvCommand.getRgvNo(), new Task(4, rgvCommand))) {
                            log.error("RGV确认命令下发失败，RGV号={}，任务数据={}", rgvProtocol.getRgvNo(), JSON.toJSON(rgvCommand));
                            return;
                        }
                        log.error("RGV确认命令下发成功，RGV号={}，任务数据={}", rgvProtocol.getRgvNo(), JSON.toJSON(rgvCommand));
                    }
                }
            }
        }
    }

    public synchronized void autoEmptyOut() {
        DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, 1);
        Integer autoOutSite = 12;
        //如果站点可出禁用，则不生成空盘出库任务
        StaProtocol staProtocol = devpThread.getStation().get(autoOutSite);
        if (staProtocol == null) {
            return;
        } else {
            staProtocol = staProtocol.clone();
    //rgv入库
    public synchronized void rgvInExecute(ZyRgvThread rgvThread, RgvProtocol rgvProtocol) {
        for (RgvSlave.Sta sta : rgvThread.getSlave().getInStn()) {
            if (rgvProtocol.getTaskNo1() > 0) {
                //检测rgv工位1是否为入库任务
                WrkMast wrkMast1 = wrkMastMapper.selectByWrkNo(rgvProtocol.getTaskNo1().intValue());
                if (wrkMast1.getWrkSts() > 100) {
                    continue;//出库任务跳过
                }
            }

            SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, sta.getDevpPlcId());
            StaProtocol staProtocol = devpThread.getStation().get(sta.getSourceStaNo());
            //判断输送线是否自动、有物、可入、有工作号
            if (!(staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isOutEnable() && (staProtocol.getWorkNo() > 0))) {
                continue;
            }

            //搜索工作档
            WrkMast wrkMast = wrkMastMapper.selectByWrkNo(staProtocol.getWorkNo().intValue());
            if (wrkMast == null) {
                continue;//工作档不存在
            }

            //获取RGV放货站点
            Integer staNo = Utils.getRgvStaNo(rgvProtocol.getRgvNo(), sta.getSourceStaNo(), staProtocol.getStaNo().intValue(), true);
            if (staNo == null) {
                continue;//RGV放货站点不存在
            }

            //判断目标站是否自动、可入、无物、无工作号
            StaProtocol staProtocol1 = devpThread.getStation().get(staNo);
            if (!(staProtocol1.isAutoing() && staProtocol1.isInEnable() && !staProtocol1.isLoading() && (staProtocol1.getWorkNo() == 0))) {
                continue;
            }

            // 命令下发区 --------------------------------------------------------------------------
            RgvCommand rgvCommand = new RgvCommand();
            rgvCommand.setRgvNo(rgvProtocol.getRgvNo());//RGV编号
            rgvCommand.setAckFinish((short) 0);

            //判断rgv工位1是否可用
            if (rgvProtocol.getTaskNo1() == 0) {
                rgvCommand.setTaskNo1(wrkMast.getWrkNo().shortValue());//工作号
                rgvCommand.setTaskMode1(RgvTaskModeType.PICK_RELEASE);//工作模式 取放货
                rgvCommand.setSourceStaNo1(staProtocol.getStaNo());//源站
                rgvCommand.setDestinationStaNo1(staNo.shortValue());//目标站
                rgvCommand.setCommand((short) 0);//工位1暂不确认
            } else if (rgvProtocol.getTaskNo2() == 0) {//判断rgv工位2是否可用
                rgvCommand.setTaskNo2(wrkMast.getWrkNo().shortValue());//工作号
                rgvCommand.setTaskMode2(RgvTaskModeType.PICK_RELEASE);//工作模式 取放货
                rgvCommand.setSourceStaNo2(staProtocol.getStaNo());//源站
                rgvCommand.setDestinationStaNo2(staNo.shortValue());//目标站
                rgvCommand.setCommand((short) 1);//工位2确认
            }else {
                continue;//没有可用RGV工位
            }

            if (!MessageQueue.offer(SlaveType.Rgv, rgvCommand.getRgvNo(), new Task(2, rgvCommand))) {
                log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvProtocol.getRgvNo(), JSON.toJSON(rgvCommand));
                continue;
            }

            log.error("RGV命令下发成功，RGV号={}，任务数据={}", rgvProtocol.getRgvNo(), JSON.toJSON(rgvCommand));
        }
        if (staProtocol.isAutoing()  //自动
                && !staProtocol.isLoading()  //无物
                && staProtocol.isOutEnable()  //可出信号
                && staProtocol.getWorkNo() == 0
        ) {
            WrkMast pakoutEmpty = wrkMastMapper.selectPakoutEmpty(autoOutSite);
            if (null != pakoutEmpty) {
    }

    //rgv出库
    public synchronized void rgvOutExecute(ZyRgvThread rgvThread, RgvProtocol rgvProtocol) {
        for (RgvSlave.Sta sta : rgvThread.getSlave().getOutStn()) {
            if (rgvProtocol.getTaskNo1() > 0) {
                //检测rgv工位1是否为出库任务
                WrkMast wrkMast1 = wrkMastMapper.selectByWrkNo(rgvProtocol.getTaskNo1().intValue());
                if (wrkMast1.getWrkSts() < 100) {
                    continue;//入库任务跳过
                }
            }

            SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, sta.getDevpPlcId());
            StaProtocol staProtocol = devpThread.getStation().get(sta.getSourceStaNo());
            //判断输送线是否自动、有物、可出、有工作号
            if (!(staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isOutEnable() && (staProtocol.getWorkNo() > 0))) {
                continue;
            }

            //搜索工作档
            WrkMast wrkMast = wrkMastMapper.selectByWrkNo(staProtocol.getWorkNo().intValue());
            if (wrkMast == null) {
                continue;//工作档不存在
            }

            //获取RGV放货站点
            Integer staNo = Utils.getRgvStaNo(rgvProtocol.getRgvNo(), sta.getSourceStaNo(), staProtocol.getStaNo().intValue(), false);
            if (staNo == null) {
                continue;//RGV放货站点不存在
            }

            //判断目标站是否自动、可出、无物、无工作号
            StaProtocol staProtocol1 = devpThread.getStation().get(staNo);
            if (!(staProtocol1.isAutoing() && staProtocol1.isOutEnable() && !staProtocol1.isLoading() && (staProtocol1.getWorkNo() == 0))) {
                continue;
            }

            // 命令下发区 --------------------------------------------------------------------------
            RgvCommand rgvCommand = new RgvCommand();
            rgvCommand.setRgvNo(rgvProtocol.getRgvNo());//RGV编号
            rgvCommand.setAckFinish((short) 0);

            //判断rgv工位1是否可用
            if (rgvProtocol.getTaskNo1() == 0) {
                rgvCommand.setTaskNo1(wrkMast.getWrkNo().shortValue());//工作号
                rgvCommand.setTaskMode1(RgvTaskModeType.PICK_RELEASE);//工作模式 取放货
                rgvCommand.setSourceStaNo1(staProtocol.getStaNo());//源站
                rgvCommand.setDestinationStaNo1(staNo.shortValue());//目标站
                rgvCommand.setCommand((short) 0);//工位1暂不确认
            } else if (rgvProtocol.getTaskNo2() == 0) {//判断rgv工位2是否可用
                rgvCommand.setTaskNo2(wrkMast.getWrkNo().shortValue());//工作号
                rgvCommand.setTaskMode2(RgvTaskModeType.PICK_RELEASE);//工作模式 取放货
                rgvCommand.setSourceStaNo2(staProtocol.getStaNo());//源站
                rgvCommand.setDestinationStaNo2(staNo.shortValue());//目标站
                rgvCommand.setCommand((short) 1);//工位2确认
            }else {
                continue;//没有可用RGV工位
            }

            if (!MessageQueue.offer(SlaveType.Rgv, rgvCommand.getRgvNo(), new Task(2, rgvCommand))) {
                log.error("RGV命令下发失败，RGV号={}，任务数据={}", rgvProtocol.getRgvNo(), JSON.toJSON(rgvCommand));
                continue;
            }

            log.error("RGV命令下发成功，RGV号={}，任务数据={}", rgvProtocol.getRgvNo(), JSON.toJSON(rgvCommand));
        }
    }

    //RGV工作完成
    public synchronized void rgvFinished() {
        SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, 1);
        for (RgvSlave slave : slaveProperties.getRgv()) {
            ZyRgvThread rgvThread = (ZyRgvThread) SlaveConnection.get(SlaveType.Rgv, slave.getId());
            if (rgvThread == null) {
                return;
            }
            try {
                String response = new HttpHandler.Builder()
                        .setUri(wmsUrl)
                        .setPath("/rpc/auto/emptyOut/v1")
                        .build()
                        .doPost();
                JSONObject jsonObject = JSON.parseObject(response);
                if (jsonObject.getInteger("code").equals(200)) {
                    JSONObject data = (JSONObject) jsonObject.get("data");
                    log.info((String) data.get("msg"));
                } else {
                    log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1","", response);

            RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
            if (rgvProtocol == null) {
                return;
            }

            //  状态：等待确认
            if (rgvProtocol.getStatusType() == RgvStatusType.WAITING) {
                if (rgvProtocol.getTaskNo1() == 9999) {
                    // RGV复位
                    rgvThread.setResetFlag1(true);
                }else {
                    // 获取待确认工作档
                    WrkMast wrkMast = wrkMastMapper.selectPakInStep3(rgvProtocol.getTaskNo1().intValue());
                    if (wrkMast == null) {
                        log.error("RGV处于等待确认且任务完成状态，但未找到工作档。RGV号={}，工作号={}", rgvProtocol.getRgvNo(), rgvProtocol.getTaskNo1());
                        continue;
                    }

                    if (rgvProtocol.getTaskNo1() > 0 && rgvProtocol.getTaskFinish1() == 1) {
                        //工位1任务完成
                        // RGV复位
                        rgvThread.setResetFlag1(true);

                        //给目标站输送线写入数据
                        Short destinationPos1 = rgvProtocol.getDestinationPos1();//获取工位1目标站
                        StaProtocol staProtocol = devpThread.getStation().get(destinationPos1.intValue()).clone();
                        staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());//写入工作号
                        staProtocol.setStaNo(wrkMast.getStaNo().shortValue());//写入目标站
                        if (!MessageQueue.offer(SlaveType.Devp, 1, new Task(2, staProtocol))) {
                            log.info("{}任务，RGV搬运成功，写入输送数据失败{}", wrkMast.getWrkNo(), JSON.toJSONString(staProtocol));
                        }

                        //2号RGV和3号RGV工作完成后需要更新工作档状态
                        if (rgvProtocol.getRgvNo() == 2 || rgvProtocol.getRgvNo() == 3) {
                            if (wrkMast.getWrkSts() == 13) {//13.RGV搬运中 => 14.已出库
                                wrkMast.setWrkSts(14L);
                                wrkMast.setModiTime(new Date());
                                wrkMastMapper.updateById(wrkMast);
                            }
                        }
                    }

                    if (rgvProtocol.getTaskNo2() > 0 && rgvProtocol.getTaskFinish2() == 1) {
                        //工位2任务完成
                        // RGV复位
                        rgvThread.setResetFlag2(true);

                        //给目标站输送线写入数据
                        Short destinationPos2 = rgvProtocol.getDestinationPos2();//获取工位2目标站
                        StaProtocol staProtocol = devpThread.getStation().get(destinationPos2.intValue()).clone();
                        staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());//写入工作号
                        staProtocol.setStaNo(wrkMast.getStaNo().shortValue());//写入目标站
                        if (!MessageQueue.offer(SlaveType.Devp, 1, new Task(2, staProtocol))) {
                            log.info("{}任务，RGV搬运成功，写入输送数据失败{}", wrkMast.getWrkNo(), JSON.toJSONString(staProtocol));
                        }

                        //2号RGV和3号RGV工作完成后需要更新工作档状态
                        if (rgvProtocol.getRgvNo() == 2 || rgvProtocol.getRgvNo() == 3) {
                            if (wrkMast.getWrkSts() == 13) {//13.RGV搬运中 => 14.已出库
                                wrkMast.setWrkSts(14L);
                                wrkMast.setModiTime(new Date());
                                wrkMastMapper.updateById(wrkMast);
                            }
                        }
                    }
                }
            } catch (Exception e) {
                e.printStackTrace();
                TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
            }
        }
    }

    /**
     * 扫描碟盘机自动入库空托盘
     */
    public synchronized void autoEmptyIn() {
        for (DevpSlave slave : slaveProperties.getDevp()) {
            for (DevpSlave.Sta sta : slave.getAutoEmptyIn()) {
                // 获取空板入库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, slave.getId());
                StaProtocol staProtocol = devpThread.getStation().get(sta.getStaNo());
                if (staProtocol == null) {
                    continue;
                } else {
                    staProtocol = staProtocol.clone();
                }

                // 站点条件判断
                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
                        && staProtocol.isEmptyInPalletRequire() && staProtocol.getWorkNo() == 0) {
                    List<StaDesc> staDescs = staDescService.selectList(new EntityWrapper<StaDesc>().eq("type_no", 10).eq("stn_no", sta.getStaNo()));
                    for (StaDesc staDesc:staDescs){

                        BasDevp basDevp = basDevpService.selectOne(new EntityWrapper<BasDevp>().eq("dev_no", staDesc.getCrnStn()));

                        if (basDevp.getAutoing().equals("Y") && basDevp.getLoading().equals("N")
                                && basDevp.getWrkNo() == 0 && basDevp.getCanining().equals("Y")){
//                             更新站点信息 且 下发plc命令
                            staProtocol.setWorkNo((short) 9997);
//                            staProtocol.setStaNo(basDevp.getDevNo().shortValue());
                            staProtocol.setStaNo((short) 1013);
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            boolean result = MessageQueue.offer(SlaveType.Devp, devpThread.getSlave().getId(), new Task(2, staProtocol));
                            if (!result) {
                                throw new CoolException("更新plc站点信息失败");
                            }
                            return;
                        }

                    }


//                    try {
//                        LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
//
//                        SearchLocParam param = new SearchLocParam();
//                        param.setIoType(10);
//                        param.setSourceStaNo(sta.getStaNo());
//                        param.setLocType1(locTypeDto.getLocType1());
//                        String response = new HttpHandler.Builder()
//                                .setUri(wmsUrl)
//                                .setPath("/rpc/pakin/loc/v1")
//                                .setJson(JSON.toJSONString(param))
//                                .build()
//                                .doPost();
//                        JSONObject jsonObject = JSON.parseObject(response);
//                        if (jsonObject.getInteger("code").equals(200)) {
//                            StartupDto dto = jsonObject.getObject("data", StartupDto.class);
//
//                            // 更新站点信息 且 下发plc命令
//                            staProtocol.setWorkNo(dto.getWorkNo().shortValue());
//                            staProtocol.setStaNo(dto.getStaNo().shortValue());
//                            devpThread.setPakMk(staProtocol.getSiteId(), false);
//                            boolean result = MessageQueue.offer(SlaveType.Devp, devpThread.getSlave().getId(), new Task(2, staProtocol));
//                            if (!result) {
//                                throw new CoolException("更新plc站点信息失败");
//                            }
//                        } else {
//                            log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
//                        }
//                    } catch (Exception e) {
//                        e.printStackTrace();
//                        TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
//                    }
                }
            }
        }
    }

    /**
     * 扫描拆盘机自动出库空托盘
     */
    public synchronized void autoEmptyOut() {
        for (DevpSlave slave : slaveProperties.getDevp()) {
            for (DevpSlave.Sta sta : slave.getAutoEmptyOut()) {
                DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, slave.getId());
                StaProtocol staProtocol = devpThread.getStation().get(sta.getStaNo());
                if (staProtocol == null) {
                    return;
                } else {
                    staProtocol = staProtocol.clone();
                }

                if (staProtocol.isAutoing()  //自动
                        && !staProtocol.isLoading()  //无物
                        && staProtocol.isEmptyOutPalletRequire()  //空托盘需求信号
//                        && staProtocol.isEmptyMk()
                        && staProtocol.getWorkNo() == 0
                ) {
                    WrkMast pakoutEmpty = wrkMastMapper.selectPakoutEmpty(sta.getStaNo());
                    if (null != pakoutEmpty) {
                        return;
                    }
                    List<StaDesc> staDescs = staDescService.selectList(new EntityWrapper<StaDesc>().eq("stn_no", sta.getStaNo()));
                    for (StaDesc staDesc: staDescs){
                        BasCrnp basCrnp = basCrnpService.selectOne(new EntityWrapper<BasCrnp>().eq("crn_no", staDesc.getCrnNo()));
                        if (!basCrnp.getCrnSts().equals(3) || basCrnp.getCrnErr() != 0){
                            continue;
                        }
                        try {
                            HashMap<String, Object> map = new HashMap<>();
                            map.put("crnNo", staDesc.getCrnNo());//目标站
                            String response = new HttpHandler.Builder()
                                    .setUri(wmsUrl)
                                    .setParams(map)
                                    .setPath("/rpc/auto/emptyOut/v1")
                                    .build()
                                    .doPost();
                            JSONObject jsonObject = JSON.parseObject(response);
                            if (jsonObject.getInteger("code").equals(200)) {
                                JSONObject data = (JSONObject) jsonObject.get("data");
                                log.info((String) data.get("msg"));
                                return;
                            } else {
                                log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1","", response);
                            }
                        } catch (Exception e) {
                            e.printStackTrace();
                            TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
                        }
                    }

                }
            }

        }

    }

}