zy-wcs.git - Gitblit

			@@ -19,8 +19,8 @@
			import com.zy.common.model.SearchLocParam;
			import com.zy.common.model.StartupDto;
			import com.zy.common.service.CommonService;
			import com.zy.common.utils.CollectionUtils;
			import com.zy.common.utils.HttpHandler;
			import com.zy.common.utils.News;
			import com.zy.core.CrnThread;
			import com.zy.core.DevpThread;
			import com.zy.core.cache.MessageQueue;
			@@ -41,7 +41,6 @@
			import lombok.extern.slf4j.Slf4j;
			import org.springframework.beans.factory.annotation.Autowired;
			import org.springframework.beans.factory.annotation.Value;
			import org.springframework.scheduling.annotation.Async;
			import org.springframework.stereotype.Service;
			import org.springframework.transaction.annotation.Transactional;
			import org.springframework.transaction.interceptor.TransactionAspectSupport;
			@@ -87,37 +86,26 @@
			private BasErrLogService basErrLogService;
			@Autowired
			private BasCrnErrorMapper basCrnErrorMapper;
			@Autowired
			private WrkMastService wrkMastService;

			@Value("${wms.url}")
			private String wmsUrl;
			@Value("${crnBackHp.enable}")
			private boolean crnBackHp;

			/**
			* 组托
			* 入库站，根据条码扫描生成入库工作档，工作状态 2
			*/
			public void generateStoreWrkFile() {
			public synchronized void generateStoreWrkFile() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			for (DevpSlave.Sta inSta : devp.getInSta()) {
			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, inSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {
			log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			continue;
			}
			} else {
			continue;
			}

			// 获取入库站信息
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(inSta.getStaNo());
			if (staProtocol == null) {
			@@ -126,17 +114,39 @@
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if ( inSta.getStaNo()==180 && devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			//9998退回，9996空板
			if (!Cools.isEmpty(barcode) && (staProtocol.getWorkNo() != 9998 \|\| staProtocol.getWorkNo() != 9996)) {
			log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			String errorMsg = "15站扫码失败，已退回14站";
			staProtocol.setWorkNo((short) 9998);
			staProtocol.setStaNo((short) 14);
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			// led 异常显示
			if (ledThread != null) {
			News.error(methodName + ":扫码失败，请重试");
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			}
			continue;
			}
			} else {
			continue;
			}

			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading()
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getWorkNo() == 9999)
			&& staProtocol.isPakMk()){// && !Cools.isEmpty(barcode)) {
			&& !staProtocol.isEmptyMk()
			&& (staProtocol.getWorkNo() == 9999 \|\| staProtocol.getWorkNo() == 9997 \|\| staProtocol.getWorkNo() == 9995)
			&& staProtocol.isPakMk()) {// && !Cools.isEmpty(barcode)) {

			// if(Cools.isEmpty(barcode) \|\| "NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			// log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			// News.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			// //条码为空或者不符合，退库到172站点
			// staProtocol.setWorkNo((short)9999);
			// staProtocol.setStaNo((short)172);
			@@ -151,15 +161,20 @@
			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			if (wrkMast != null) {
			log.error("工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast.getWrkNo());
			News.error(methodName + ":工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast.getWrkNo());
			if (ledThread != null) {
			News.error(methodName + ":扫码失败，请重试");
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, "工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={"+ wrkMast.getWrkNo() + "}, 请手动取消已存在工作档"));
			}
			continue;
			}
			// // 获取入库通知档
			// List<WaitPakin> waitPakins = waitPakinMapper.selectList(new EntityWrapper<WaitPakin>().eq("zpallet", barcode).eq("io_status", "N"));
			// if (waitPakins.isEmpty()) {
			// log.error("无此入库条码数据。条码号={}", barcode);
			// continue;
			// }

			WrkMast checkPick = wrkMastService.selectOne(new EntityWrapper<WrkMast>()
			.eq("barcode", barcode)
			.eq("io_type", 103));
			if (!Cools.isEmpty(checkPick)) {
			continue;
			}

			try {

			@@ -186,10 +201,26 @@
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.error(methodName + ":更新plc站点信息失败");

			throw new CoolException("更新plc站点信息失败");
			}


			} else {
			log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl+"/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			staProtocol.setWorkNo((short) 9998);
			staProtocol.setStaNo((short) 14);
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, errorMsg));
			}
			}
			News.error(methodName +":请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);

			}


			@@ -267,7 +298,9 @@
			* wms入库
			* 入库站，根据条码扫描生成入库工作档，工作状态 1 ==>> 2
			*/
			public void generateStoreWrkFile0() {
			public synchronized void generateStoreWrkFile0() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历入库口
			@@ -282,7 +315,9 @@
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }
			// if (inSta.getStaNo() == 203 && devpThread.ioModeOf2F != IoModeType.PAKIN_MODE) {
			// continue;
			// }

			// 判断是否满足入库条件
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
			@@ -290,7 +325,9 @@
			&& staProtocol.isPakMk()) {
			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep11(inSta.getStaNo());
			if (wrkMast == null) { continue; }
			if (wrkMast == null) {
			continue;
			}

			// 命令下发区 --------------------------------------------------------------------------

			@@ -304,10 +341,10 @@
			wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			News.error(methodName + ":更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			}
			} else {
			log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			News.error(methodName +":发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}

			}
			@@ -321,24 +358,15 @@
			/**
			* 拣料、并板、盘点再入库
			*/
			public synchronized void stnToCrnStnPick(){
			public synchronized void stnToCrnStnPick() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历拣料入库口
			for (DevpSlave.Sta pickSta : devp.getPickSta()) {
			// 获取条码扫描仪信息
			// // 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {
			log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			continue;
			}
			} else {
			continue;
			}
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());

			// 获取拣料入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			@@ -348,32 +376,49 @@
			} else {
			staProtocol = staProtocol.clone();
			}
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();

			if (!Cools.isEmpty(barcode) && (staProtocol.getWorkNo() != 9998 \|\| staProtocol.getWorkNo() != 9996)) {
			log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			staProtocol.setWorkNo((short) 9998);
			staProtocol.setStaNo((short) 14);
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			News.error(methodName + ":扫码失败，请重试");
			MessageQueue.offer(SlaveType.Led, pickSta.getLed(), new Task(3, errorMsg));
			}
			continue;
			}
			} else {
			continue;
			}


			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.isPakMk()){

			// if(Cools.isEmpty(barcode) \|\| "NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			// log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			// //条码为空或者不符合，退库到172站点
			// staProtocol.setWorkNo((short)9999);
			// staProtocol.setStaNo((short)172);
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// if (!result) {
			// throw new CoolException("更新plc站点信息失败");
			// }
			// continue;
			// }
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk()
			&& (staProtocol.getWorkNo() == 9999 \|\| staProtocol.getWorkNo() == 9997 \|\| staProtocol.getWorkNo() == 9995)
			&& staProtocol.isPakMk()) {

			WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
			// WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
			if (wrkMast == null) {
			// 无拣料数据
			continue;
			}
			if ((wrkMast.getIoType() != 103 && wrkMast.getIoType() != 104 && wrkMast.getIoType() != 107)
			\|\| Cools.isEmpty(wrkMast.getStaNo()) \|\| Cools.isEmpty(wrkMast.getSourceStaNo()) ) {
			\|\| Cools.isEmpty(wrkMast.getStaNo()) \|\| Cools.isEmpty(wrkMast.getSourceStaNo())) {
			continue;
			}

			@@ -384,47 +429,61 @@
			// } else if (wrkMast.getStaNo() == 113) {
			// stnNo = 128;
			// } else {
			// log.error("{}号任务数据异常！", wrkMast.getWrkNo());
			// News.error("{}号任务数据异常！", wrkMast.getWrkNo());
			// }
			// 获取目标站
			Wrapper<StaDesc> wrapper = new EntityWrapper<StaDesc>()
			.eq("type_no", wrkMast.getIoType() - 50)
			.eq("stn_no", pickSta.getStaNo()) // 作业站点 = 拣料出库的目标站
			//速腾特有捡料， 11站是出库站，然后手动走到15站进行再入库
			.eq("stn_no", 15) // 作业站点 = 拣料出库的目标站
			.eq("crn_no", wrkMast.getCrnNo()); // 堆垛机号
			StaDesc staDesc = staDescService.selectOne(wrapper);
			if (Cools.isEmpty(staDesc)) {
			log.error("入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
			News.error(methodName + ":入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
			continue;
			}

			try {
			// 保存工作明细档历史档
			if (wrkMastMapper.saveWrkDetlLog(wrkMast.getWrkNo()) == 0) {
			News.error(methodName + ":保存工作明细档历史档失败");

			throw new CoolException("保存工作明细档历史档失败");
			}
			// 保存工作主档历史档

			if (wrkMastMapper.saveWrkMastLog(wrkMast.getWrkNo()) == 0) {
			News.error(methodName + "-1:" + "保存工作主档历史档失败");

			throw new CoolException("保存工作主档历史档失败");
			}

			Date now = new Date();
			// 堆垛机站点(目标站)
			Integer staNo = staDesc.getCrnStn();
			// 更新工作档数据状态
			wrkMast.setIoTime(now);
			wrkMast.setIoType(wrkMast.getIoType() - 50); // 入出库类型: 103->53,104->54,107->57
			wrkMast.setWrkSts(2L); // 工作状态: 2.设备上走
			wrkMast.setSourceStaNo(wrkMast.getStaNo()); // 源站
			wrkMast.setSourceStaNo(staDesc.getStnNo()); // 源站
			wrkMast.setStaNo(staNo); // 目标站
			wrkMast.setLocNo(wrkMast.getSourceLocNo()); // 目标库位 = 出库时的源库位
			wrkMast.setSourceLocNo(""); // 源库位清空
			wrkMast.setModiTime(new Date());
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(methodName + ":更新工作档数据状态失败");

			throw new CoolException("更新工作档数据状态失败");
			}
			// 更新明细档io_time (历史档关联使用）
			wrkDetlService.updateIoTime(wrkMast.getWrkNo(), now);
			// 修改库位状态 Q.拣料/盘点/并板再入库
			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			locMast.setLocSts("Q");
			locMast.setModiTime(new Date());
			if (!locMastService.updateById(locMast)) {
			News.error(methodName+ ":修改库位状态失败");

			throw new CoolException("修改库位状态失败");
			}
			} catch (Exception e) {
			@@ -439,7 +498,9 @@
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			News.error(methodName + ":发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());

			News.error(methodName + ":发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}

			}
			@@ -452,11 +513,39 @@
			/**
			* 堆垛机站出库到出库站
			*/
			@Async
			public void crnStnToOutStn() {
			public synchronized void crnStnToOutStn() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (CrnSlave crnSlave : slaveProperties.getCrn()) {
			// 遍历堆垛机出库站
			for (CrnSlave.CrnStn crnStn : crnSlave.getCrnOutStn()) {
			//查询工作档
			List<WrkMast> wrkMasts= wrkMastService.selectList(new EntityWrapper<WrkMast>()
			.eq("crn_no",crnSlave.getCrnOutStn())
			.and()
			.gt("io_type",100)
			.orderBy("appe_time")
			);
			if(Cools.isEmpty(wrkMasts)){
			continue;
			}
			//遍历任务档，按生成时间进行排序
			for (WrkMast wrkMast: wrkMasts) {
			// 判断工作档条件
			if (wrkMast.getStaNo() == null \|\| wrkMast.getSourceStaNo() == null) {
			continue;
			}
			CrnSlave.CrnStn crnStn = null;
			for (CrnSlave.CrnStn crnStn1 : crnSlave.getCrnOutStn()) {
			if (crnStn1.getStaNo() == wrkMast.getSourceStaNo()) {
			crnStn = crnStn1;
			break;
			} else {
			continue;
			}
			}
			if (Cools.isEmpty(crnStn)) {
			continue;
			}

			// 获取堆垛机出库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			@@ -466,15 +555,8 @@
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing() && staProtocol.isLoading() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getStaNo() == null)) {
			// 查询工作档
			WrkMast wrkMast = wrkMastMapper.selectPakOutStep2(staProtocol.getSiteId());
			if (wrkMast == null) {
			continue;
			}
			// 判断工作档条件
			if (wrkMast.getIoType() < 100 \|\| wrkMast.getStaNo() == null \|\| wrkMast.getSourceStaNo() == null) {
			continue;
			}


			// 判断吊车是否实际已完成，且电脑状态在move中，以备电脑进行更新工作档
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, wrkMast.getCrnNo());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			@@ -503,7 +585,7 @@
			// 复位堆垛机
			crnThread.setResetFlag(true);
			} else {
			log.error("更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			News.error(methodName + ":更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			}

			}
			@@ -513,22 +595,98 @@
			}
			}

			// public synchronized void crnStnToOutStn1() {
			// String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();
			//
			// for (CrnSlave crnSlave : slaveProperties.getCrn()) {
			// // 遍历堆垛机出库站
			// for (CrnSlave.CrnStn crnStn : crnSlave.getCrnOutStn()) {
			// // 获取堆垛机出库站信息
			// DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			// StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			// if (staProtocol == null) {
			// continue;
			// } else {
			// staProtocol = staProtocol.clone();
			// }
			// if (staProtocol.isAutoing() && staProtocol.isLoading() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getStaNo() == null)) {
			// // 查询工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep2(staProtocol.getSiteId());
			// if (wrkMast == null) {
			// continue;
			// }
			// // 判断工作档条件
			// if (wrkMast.getIoType() < 100 \|\| wrkMast.getStaNo() == null \|\| wrkMast.getSourceStaNo() == null) {
			// continue;
			// }
			// // 判断吊车是否实际已完成，且电脑状态在move中，以备电脑进行更新工作档
			// CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, wrkMast.getCrnNo());
			// CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			// if (crnProtocol.statusType == CrnStatusType.FETCHING \|\| crnProtocol.statusType == CrnStatusType.PUTTING) {
			// // 移动中
			// continue;
			// }
			// // 判断堆垛机状态等待确认
			// if (crnProtocol.modeType == CrnModeType.AUTO && crnProtocol.getTaskNo().equals(wrkMast.getWrkNo().shortValue())
			// && crnProtocol.statusType == CrnStatusType.WAITING
			// && crnProtocol.forkPosType == CrnForkPosType.HOME) {
			//
			// // 命令下发区 --------------------------------------------------------------------------
			//
			// // 下发站点信息
			// staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
			// staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			// if (!MessageQueue.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol))) {
			// continue;
			// }
			//
			// // 更新工作档状态为14失败
			// wrkMast.setWrkSts(14L);
			// wrkMast.setCrnEndTime(new Date());
			// if (wrkMastMapper.updateById(wrkMast) != 0) {
			// // 复位堆垛机
			// crnThread.setResetFlag(true);
			// } else {
			// News.error(methodName + ":更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			// }
			//
			// }
			//
			// }
			// }
			// }
			// }

			/**
			* 入出库 ===>> 堆垛机入出库作业下发
			*/
			public synchronized void crnIoExecute(){
			public synchronized void crnIoExecute() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) { continue; }
			BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			if (basCrnp == null) {
			log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			if (crnProtocol == null) {
			continue;
			}
			BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			if (basCrnp == null) {
			News.error(methodName + ":{}号堆垛机尚未在数据库进行维护！", crn.getId());
			continue;
			}

			// //堆垛机回原点任务中
			// if(crnThread.isBackHpFlag()){
			// continue;
			// }

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE
			&& crnProtocol.getTaskNo() == 0
			&& crnProtocol.getModeType() == CrnModeType.AUTO
			&& crnProtocol.getLoaded() == 0
			&& crnProtocol.getForkPos() == 0) {
			// 如果最近一次是入库模式
			if (crnProtocol.getLastIo().equals("I")) {
			if (basCrnp.getInEnable().equals("Y")) {
			@@ -552,20 +710,15 @@
			}
			// 库位移转
			this.locToLoc(crn, crnProtocol);
			// this.crnRebackHp(crnProtocol, crnThread);

			if (crnBackHp) {

			//堆垛机没有执行中任务，设备存在入库任务时叫回原点
			this.crnRebackHp(crnProtocol);

			}
			}
			}

			/**
			* 回原点，堆垛机没有执行中任务，设备存在入库任务时叫回原点
			*/
			public synchronized void crnRebackHp(CrnProtocol crnProtocol){
			public synchronized void crnRebackHp(CrnProtocol crnProtocol, CrnThread crnThread) {
			// for (CrnSlave crn : slaveProperties.getCrn()) {
			// // 获取堆垛机信息
			// CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			@@ -575,53 +728,55 @@
			// }
			// BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			// if (basCrnp == null) {
			// log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			// News.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			// continue;
			// }
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if(crnProtocol.getBay() ==1 && crnProtocol.getLevel()==1){
			return;
			}

			// 已经存在吊车执行任务时，则过滤3,12
			if (wrkMastMapper.selectWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//堆垛机有执行中任务，过滤3,4,11,12
			if (wrkMastMapper.selectCrnWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}


			//输送线没有入库任务，过滤2
			if (wrkMastMapper.selectDevWorking(crnProtocol.getCrnNo()) == null) {
			return;
			}
			// log.info("堆垛机召回原点==>>" + crn.getId() + "号堆垛机有入库任务,召回原点");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式: 回原点
			crnCommand.setSourcePosX((short) 0); // 源库位排
			crnCommand.setSourcePosY((short) 0); // 源库位列
			crnCommand.setSourcePosZ((short) 0); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机回原点命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if (crnProtocol.getBay() == 1 && crnProtocol.getLevel() == 1) {
			return;
			}

			// 已经存在吊车执行任务时，则过滤3,12
			if (wrkMastMapper.selectWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//堆垛机有执行中任务，过滤3,4,11,12
			if (wrkMastMapper.selectCrnWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}

			//输送线没有入库任务，过滤2
			if (wrkMastMapper.selectDevWorking(crnProtocol.getCrnNo()) == null) {
			return;
			}
			News.info("堆垛机召回原点==>>" + crnProtocol.getCrnNo() + "号堆垛机有入库任务,召回原点");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式: 回原点
			crnCommand.setSourcePosX((short) 0); // 源库位排
			crnCommand.setSourcePosY((short) 0); // 源库位列
			crnCommand.setSourcePosZ((short) 0); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			News.error("堆垛机回原点命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			crnThread.setBackHpFlag(true);
			}
			// }
			}

			/**
			* 入库 ===>> 堆垛机站到库位
			*/
			public void crnStnToLoc(CrnSlave slave, CrnProtocol crnProtocol){
			public synchronized void crnStnToLoc(CrnSlave slave, CrnProtocol crnProtocol) {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (CrnSlave.CrnStn crnStn : slave.getCrnInStn()) {
			boolean flag = false;
			// 获取堆垛机入库站信息
			@@ -635,11 +790,11 @@
			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			log.error("入库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			News.error(methodName + ":入库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			continue;
			}
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.getWorkNo() > 0 && staProtocol.isInEnable()
			&& staDetl.getCanining()!=null && staDetl.getCanining().equals("Y")) {
			&& staDetl.getCanining() != null && staDetl.getCanining().equals("Y")) {
			flag = true;
			}
			if (!flag) {
			@@ -647,18 +802,18 @@
			}
			// 获取工作状态为2（设备上走）的入库工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep2(slave.getId(), staProtocol.getWorkNo().intValue(), crnStn.getStaNo());
			if(null == wrkMast) {
			// log.error("查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
			if (null == wrkMast) {
			// News.error("查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
			continue;
			}
			// 获取库位信息
			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			if (locMast == null) {
			log.error("查询库存无数据--库位号{}", wrkMast.getLocNo());
			News.error(methodName + ":查询库存无数据--库位号{}", wrkMast.getLocNo());
			continue;
			}
			if (!locMast.getLocSts().equals("S") && !locMast.getLocSts().equals("Q")) {
			log.error("入库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), locMast.getLocSts());
			News.error(methodName + ":入库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), locMast.getLocSts());
			continue;
			}

			@@ -669,7 +824,7 @@

			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			return;
			continue;
			}

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			@@ -680,12 +835,12 @@
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			News.error(methodName + ":{}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			News.error(methodName + ":调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			}
			@@ -696,13 +851,15 @@
			wrkMast.setUpdMk("Y");
			wrkMast.setIoPri(14D);
			wrkMastMapper.updateById(wrkMast);
			// 生成工作档,将浅库位移转到新的库位中
			moveLocForDeepLoc(slave, shallowLoc);
			// 生成工作档、改变浅库位的源库/目标库库位状态、下发堆垛机命令（立马执行)
			moveLocForDeepLocPakin(slave, shallowLoc, wrkMast);
			// moveLocForDeepLocPakin(slave, shallowLoc, wrkMast);
			}
			continue;
			} else if (shallowLoc.getLocSts().equals("Q")){
			} else if (shallowLoc.getLocSts().equals("Q")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts()==4) {
			if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
			continue;
			}
			}
			@@ -721,7 +878,7 @@
			crnCommand.setDestinationPosY(locMast.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(locMast.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			News.error(methodName + ":堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {

			// long startTime = System.currentTimeMillis();
			@@ -742,7 +899,7 @@
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error(methodName + ":修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}
			}
			@@ -750,125 +907,267 @@

			/**
			* 出库 ===>> 库位到堆垛机站
			* 2022-06-09 TQS修改，查询工作档LIST，遍历下发，防止第一个任务堵塞出库
			*/
			public void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
			public synchronized void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol) {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// 获取工作状态为11（生成出库ID）的出库工作档
			WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			if (wrkMast == null) {
			continue;
			}
			// 工作档状态判断
			if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null){
			log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			continue;
			}
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
			log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			continue;
			}
			// 获取堆垛机出库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			List<WrkMast> wrkMasts = wrkMastMapper.selectPakOutStep11(slave.getId(), crnStn.getStaNo());
			for (WrkMast wrkMast : wrkMasts) {
			if (wrkMast == null) {
			continue;
			}
			// 工作档状态判断
			if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null) {
			News.error(methodName + ":查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			continue;
			}
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (!sourceSta.getLocSts().equals("R") && !sourceSta.getLocSts().equals("P")) {
			News.error(methodName + ":出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			continue;
			}
			// 获取堆垛机出库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			break;
			// continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
			// if (wrkMast.getStaNo() == 204 && devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
			// continue;
			// }


			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			continue;
			}
			// 判断堆垛机出库站状态
			if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
			&& staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// 命令下发区 --------------------------------------------------------------------------

			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			continue;
			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			News.error(methodName + ":出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			break;
			// continue;
			}
			// 判断堆垛机出库站状态
			if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")
			&& staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// 命令下发区 --------------------------------------------------------------------------

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			if(waitWrkMast.getWrkSts() == 11) {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			// continue;
			break;
			}

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			News.error(methodName + ":{}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			if (waitWrkMast.getWrkSts() == 11) {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			News.error(methodName + ":调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			} else {

			}
			}
			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			//2022-08-16 modify,不根据updmk标记移库任务(容易被取消导致堵塞)，查询工作档是否存在任务
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			// 此标记避免多次执行移库任务
			// if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())
			// \|\| Cools.isEmpty(waitWrkMast)) {
			if (Cools.isEmpty(waitWrkMast)) {
			wrkMast.setUpdMk("Y");
			wrkMastMapper.updateById(wrkMast);
			// 生成工作档,将浅库位移转到新的库位中
			moveLocForDeepLoc(slave, shallowLoc);
			}
			News.error(methodName + ": {}任务出库失败，浅库位堵塞！浅库位号:{}", wrkMast.getWrkNo(), shallowLocNo);
			continue;
			} else if (shallowLoc.getLocSts().equals("Q") \|\| shallowLoc.getLocSts().equals("S")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
			continue;
			}
			}
			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// 此标记避免多次执行移库任务
			if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())) {
			wrkMast.setUpdMk("Y");
			wrkMastMapper.updateById(wrkMast);
			// 生成工作档、改变浅库位的源库/目标库库位状态、下发堆垛机命令（立马执行)
			moveLocForDeepLoc(slave, shallowLoc);
			}
			log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
			continue;
			}
			}

			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			return;
			}
			// 已经存在吊车执行任务时，则过滤
			if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			break;
			// return;
			}

			// 1.堆垛机开始移动
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			crnCommand.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			// 1.堆垛机开始移动
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			crnCommand.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			News.error(methodName + ":堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(methodName + ":修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			break;
			}
			}
			}
			}
			}

			// /**
			// * 出库 ===>> 库位到堆垛机站
			// */
			// public synchronized void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
			// for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// // 获取工作状态为11（生成出库ID）的出库工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			// if (wrkMast == null) {
			// continue;
			// }
			// // 工作档状态判断
			// if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null){
			// News.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			// continue;
			// }
			// // 获取源库位信息
			// LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			// if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
			// News.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			// continue;
			// }
			// // 获取堆垛机出库站信息
			// SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			// StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			// if (staProtocol == null) {
			// continue;
			// } else {
			// staProtocol = staProtocol.clone();
			// }
			//
			//// // 入出库模式判断
			//// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
			//
			//
			// // 查询站点详细信息
			// BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			// if (staDetl == null) {
			// News.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			// continue;
			// }
			// // 判断堆垛机出库站状态
			// if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
			// && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			// // 命令下发区 --------------------------------------------------------------------------
			//
			// // 堆垛机控制过滤
			// if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			// continue;
			// }
			//
			// // 双深库位且浅库位有货，则需先对浅库位进行库位移转
			// if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			// String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			// LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			// if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			// WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			// if (null == waitWrkMast) {
			// News.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			// } else {
			// if(waitWrkMast.getWrkSts() == 11) {
			// waitWrkMast.setIoPri(15D);
			// waitWrkMast.setModiTime(new Date());
			// if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			// News.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			// }
			// continue;
			// } else {
			//
			// }
			// }
			// } else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// // 此标记避免多次执行移库任务
			// if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())) {
			// wrkMast.setUpdMk("Y");
			// wrkMastMapper.updateById(wrkMast);
			// // 生成工作档、改变浅库位的源库/目标库库位状态、下发堆垛机命令（立马执行)
			// moveLocForDeepLoc(slave, shallowLoc);
			// }
			// News.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
			// continue;
			// }
			// }
			//
			// // 已经存在吊车执行任务时，则过滤
			// if (wrkMastMapper.selectWorking(slave.getId()) != null) {
			// return;
			// }
			//
			// // 1.堆垛机开始移动
			// CrnCommand crnCommand = new CrnCommand();
			// crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
			// crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
			// crnCommand.setAckFinish((short) 0); // 任务完成确认位
			// crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式: 库位移转
			// crnCommand.setSourcePosX(sourceSta.getRow1().shortValue()); // 源库位排
			// crnCommand.setSourcePosY(sourceSta.getBay1().shortValue()); // 源库位列
			// crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue()); // 源库位层
			// crnCommand.setDestinationPosX(crnStn.getRow().shortValue()); // 目标库位排
			// crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			// crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			// if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			// News.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			// } else {
			// // 修改工作档状态 11.生成出库ID => 12.吊车出库中
			// Date now = new Date();
			// wrkMast.setWrkSts(12L);
			// wrkMast.setCrnStrTime(now);
			// wrkMast.setModiTime(now);
			// if (wrkMastMapper.updateById(wrkMast) == 0) {
			// News.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			// }
			// }
			// }
			// }
			// }

			/**
			* 库位移转
			*/
			public void locToLoc(CrnSlave slave, CrnProtocol crnProtocol){
			public synchronized void locToLoc(CrnSlave slave, CrnProtocol crnProtocol) {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			// 获取工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(slave.getId());
			if (null == wrkMast) {
			@@ -877,7 +1176,7 @@
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (null == sourceSta) {
			log.error("工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			News.error(methodName + "工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			return;
			}
			// 源库位库位状态判断
			@@ -887,7 +1186,7 @@
			// 获取目标库位信息
			LocMast sta = locMastService.selectById(wrkMast.getLocNo());
			if (null == sta) {
			log.error("工作档库位移转失败，原因：检索目标库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			News.error(methodName + ":工作档库位移转失败，原因：检索目标库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			return;
			}
			// 获取堆垛机信息并判断是否可入出
			@@ -899,6 +1198,50 @@
			// 堆垛机控制过滤
			if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) \|\| crnProtocol.getTaskNo() != 0) {
			return;
			}

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			News.error(methodName + ":{}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			if (waitWrkMast.getWrkSts() == 11) {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			News.error(methodName + ":调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			return;
			} else {

			}
			}
			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			// WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			//2022-08-16 modify,不根据updmk标记移库任务(容易被取消导致堵塞)，查询工作档是否存在任务
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			// 此标记避免多次执行移库任务
			// if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())
			// \|\| Cools.isEmpty(waitWrkMast)) {
			if (Cools.isEmpty(waitWrkMast)) {
			wrkMast.setUpdMk("Y");
			wrkMastMapper.updateById(wrkMast);
			// 生成工作档,将浅库位移转到新的库位中
			moveLocForDeepLoc(slave, shallowLoc);
			}
			News.error(methodName + ":{}任务出库失败，浅库位堵塞！浅库位号:{}", wrkMast.getWrkNo(), shallowLocNo);
			return;
			} else if (shallowLoc.getLocSts().equals("Q") \|\| shallowLoc.getLocSts().equals("S")) {
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
			return;
			}
			}
			}

			// 已经存在吊车执行任务时，则过滤
			@@ -919,7 +1262,7 @@
			crnCommand.setDestinationPosY(sta.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(sta.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			News.error(methodName + ":堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			@@ -927,7 +1270,7 @@
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error(methodName + ":【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}

			@@ -936,23 +1279,26 @@
			/**
			* 执行对工作档的完成操作
			*/
			@Async
			public void storeFinished() {
			public synchronized void storeFinished() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) { continue; }
			if (crnProtocol == null) {
			continue;
			}
			// 状态：等待确认并且任务完成位 = 1
			if (crnProtocol.statusType == CrnStatusType.WAITING && crnProtocol.getTaskNo() != 0) {
			if(crnProtocol.getTaskNo()==9999){
			if (crnProtocol.getTaskNo() == 9999) {
			// 堆垛机复位
			crnThread.setResetFlag(true);
			}else {
			} else {
			// 获取入库待确认工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(crnProtocol.getTaskNo().intValue());
			if (wrkMast == null) {
			log.error("堆垛机处于等待确认且任务完成状态，但未找到工作档。堆垛机号={}，工作号={}", crn.getId(), crnProtocol.getTaskNo());
			News.error(methodName + ":堆垛机处于等待确认且任务完成状态，但未找到工作档。堆垛机号={}，工作号={}", crn.getId(), crnProtocol.getTaskNo());
			continue;
			}
			// 入库 + 库位转移 ==> 4.入库完成
			@@ -978,8 +1324,9 @@
			/**
			* 堆垛机异常信息记录
			*/
			@Async
			public void recCrnErr(){
			public synchronized void recCrnErr() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			Date now = new Date();
			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			@@ -1001,7 +1348,7 @@
			continue;
			}
			BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm());
			String errName = crnError==null? String.valueOf(crnProtocol.getAlarm()):crnError.getErrName();
			String errName = crnError == null ? String.valueOf(crnProtocol.getAlarm()) : crnError.getErrName();
			BasErrLog basErrLog = new BasErrLog(
			null, // 编号
			wrkMast.getWrkNo(), // 工作号
			@@ -1026,7 +1373,7 @@
			"任务中异常" // 备注
			);
			if (!basErrLogService.insert(basErrLog)) {
			log.error("堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			News.error(methodName + ":堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			}
			}
			} else {
			@@ -1036,11 +1383,11 @@
			latest.setUpdateTime(now);
			latest.setStatus(2);
			if (!basErrLogService.updateById(latest)) {
			log.error("堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			News.error(methodName + ":堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			}
			}
			}
			// 无任务
			// 无任务
			} else {
			BasErrLog latest = basErrLogService.findLatest(crn.getId());
			// 有异常
			@@ -1048,7 +1395,7 @@
			// 记录新异常
			if (latest == null \|\| (latest.getErrCode() != crnProtocol.getAlarm().intValue())) {
			BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm());
			String errName = crnError==null? String.valueOf(crnProtocol.getAlarm()):crnError.getErrName();
			String errName = crnError == null ? String.valueOf(crnProtocol.getAlarm()) : crnError.getErrName();
			BasErrLog basErrLog = new BasErrLog(
			null, // 编号
			null, // 工作号
			@@ -1063,7 +1410,7 @@
			null, // 源站
			null, // 源库位
			null, // 条码
			(int)crnProtocol.getAlarm(), // 异常码
			(int) crnProtocol.getAlarm(), // 异常码
			errName, // 异常
			1, // 异常情况
			now, // 添加时间
			@@ -1073,10 +1420,10 @@
			"无任务异常" // 备注
			);
			if (!basErrLogService.insert(basErrLog)) {
			log.error("堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			News.error(methodName + ":堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			}
			}
			// 无异常
			// 无异常
			} else {
			// 异常修复
			if (latest != null && latest.getStatus() == 1) {
			@@ -1084,7 +1431,7 @@
			latest.setUpdateTime(now);
			latest.setStatus(2);
			if (!basErrLogService.updateById(latest)) {
			log.error("堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			News.error(methodName + ":堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			}
			}
			}
			@@ -1100,8 +1447,9 @@
			/**
			* 空栈板初始化入库,叉车入库站放货
			*/
			@Async
			public void storeEmptyPlt(){
			public synchronized void storeEmptyPlt() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历空板入库口
			for (DevpSlave.Sta emptyInSta : devp.getEmptyInSta()) {
			@@ -1114,12 +1462,13 @@
			staProtocol = staProtocol.clone();
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

			// 站点条件判断
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
			&& staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 \|\| staProtocol.getWorkNo() == 9999 \|\| staProtocol.getWorkNo() == 9990 \|\| staProtocol.getWorkNo() == 9997) && staProtocol.isPakMk()) {
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& staProtocol.isEmptyMk()
			&& (staProtocol.getWorkNo() == 9996)
			&& staProtocol.isPakMk()) {

			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			@@ -1144,17 +1493,17 @@
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.error(methodName + "更新plc站点信息失败");

			throw new CoolException("更新plc站点信息失败");
			}
			} else {
			log.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl+"/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			News.error(methodName + ":请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}




			// // 检索库位
			@@ -1220,94 +1569,145 @@
			/**
			* 出库 ===>> 工作档信息写入led显示器
			*/
			@Async
			public void ledExecute() {
			public synchronized void ledExecute() {
			// String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			for (LedSlave led : slaveProperties.getLed()) {
			// 获取输送线plc线程
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, led.getDevpPlcId());
			// 命令集合
			List<LedCommand> commands = new ArrayList<>();
			// 工作档集合
			List<WrkMast> wrkMasts = new ArrayList<>();
			// // 命令集合
			// List<LedCommand> commands = new ArrayList<>();
			// // 工作档集合
			// List<WrkMast> wrkMasts = new ArrayList<>();
			for (Integer staNo : led.getStaArr()) {
			// 获取叉车站点
			StaProtocol staProtocol = devpThread.getStation().get(staNo);
			if (null == staProtocol \|\| null == staProtocol.getWorkNo() \|\| 0 == staProtocol.getWorkNo() \|\| !staProtocol.isLoading()) {
			MessageQueue.offer(SlaveType.Led, led.getId(), new Task(3, ""));
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}
			// 获取工作档数据
			WrkMast wrkMast = wrkMastMapper.selectById(staProtocol.getWorkNo());
			if (null == wrkMast \|\| wrkMast.getWrkSts() < 14 \|\| wrkMast.getIoType() < 100) { continue; }
			wrkMasts.add(wrkMast);
			// 组装命令
			if (null == wrkMast) {
			MessageQueue.offer(SlaveType.Led, led.getId(), new Task(3, ""));
			continue;
			}
			ArrayList<MatDto> matDtos = new ArrayList<>();
			Wrapper<WrkDetl> detlWrapper = new EntityWrapper<WrkDetl>()
			.eq("wrk_no", wrkMast.getWrkNo());
			LedCommand ledCommand = new LedCommand();
			ledCommand.setWorkNo(wrkMast.getWrkNo());
			// 出库模式
			switch (wrkMast.getIoType()) {
			case 101:
			ledCommand.setTitle("全板出库");
			break;
			case 103:
			ledCommand.setTitle("拣料出库");
			break;
			case 104:
			ledCommand.setTitle("并板出库");
			break;
			case 107:
			ledCommand.setTitle("盘点出库");
			break;
			ledCommand.setStaNo(wrkMast.getStaNo());
			ledCommand.setSourceStaNo(wrkMast.getSourceStaNo());
			ledCommand.setLocNo(wrkMast.getLocNo());
			ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
			ledCommand.setIoType(wrkMast.getIoType());
			ledCommand.setTitle(wrkMast.getIoType$());

			switch (wrkMast.getIoType()){
			case 10:
			case 110:
			ledCommand.setTitle("空板出库");
			ledCommand.setEmptyMk(true);
			break;
			default:
			log.error("任务入出库类型错误！！！[工作号：{}] [入出库类型：{}]", wrkMast.getWrkNo(), wrkMast.getIoType());
			ledCommand.setBarcode(wrkMast.getBarcode());
			List<WrkDetl> wrkDetls = wrkDetlService.selectList(detlWrapper);
			for (WrkDetl wrkDetl : wrkDetls) {
			MatDto matDto = new MatDto();
			matDto.setMaknx(wrkDetl.getMaktx());
			matDto.setMatNo(wrkDetl.getMatnr());
			matDto.setCount(wrkDetl.getAnfme());
			matDtos.add(matDto);
			}
			break;
			}
			ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
			ledCommand.setStaNo(wrkMast.getStaNo());
			if (wrkMast.getIoType() != 110) {
			List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
			wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatNo(), wrkDetl.getMatName(), wrkDetl.getQty())));
			}
			commands.add(ledCommand);
			}
			Set<Integer> workNos = wrkMasts.stream().map(WrkMast::getWrkNo).collect(Collectors.toSet());
			// 获取LED线程
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getId());
			// 相同工作号集合则过滤
			if (CollectionUtils.equals(ledThread.getWorkNos(), workNos)) {
			continue;
			}
			// 命令下发 -------------------------------------------------------------------------------
			if (!commands.isEmpty()) {
			if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(1, commands))) {
			log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			continue;
			} else {
			ledThread.setLedMk(false);
			}
			}

			try {
			// 修改主档led标记
			for (WrkMast wrkMast : wrkMasts) {
			wrkMast.setOveMk("Y");
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("更新工作档失败");
			}

			}
			ledCommand.setMatDtos(matDtos);
			MessageQueue.offer(SlaveType.Led, led.getId(), new Task(3, ledCommand.toString()));

			// 更新线程当前工作号集合
			ledThread.setWorkNos(workNos);

			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			// wrkMasts.add(wrkMast);
			// // 组装命令
			// LedCommand ledCommand = new LedCommand();
			// ledCommand.setWorkNo(wrkMast.getWrkNo());
			// ledCommand.setIoType(wrkMast.getIoType());
			// // 出库模式
			// switch (wrkMast.getIoType()) {
			// case -1:
			// ledCommand.setTitle("全板入库");
			// break;
			// case 10:
			// ledCommand.setTitle("空板入库");
			// break;
			// case 10-1:
			// ledCommand.setTitle("全板出库");
			// break;
			// case 103:
			// ledCommand.setTitle("拣料出库");
			// break;
			// case 104:
			// ledCommand.setTitle("并板出库");
			// break;
			// case 107:
			// ledCommand.setTitle("盘点出库");
			// break;
			// case 110:
			// ledCommand.setTitle("空板出库");
			// ledCommand.setEmptyMk(true);
			// break;
			// default:
			// News.error(methodName + ":任务入出库类型错误！！！[工作号：{}] [入出库类型：{}]", wrkMast.getWrkNo(), wrkMast.getIoType());
			// break;
			// }
			// ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
			// ledCommand.setLocNo(wrkMast.getLocNo());
			// ledCommand.setStaNo(wrkMast.getStaNo());
			//// ledCommand.setSourceStaNo(wrkMast.getSourceStaNo());
			// if (wrkMast.getIoType() != 110 && wrkMast.getIoType() != 10) {
			// List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
			// wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getAnfme())));
			// }
			// commands.add(ledCommand);
			// }
			// Set<Integer> workNos = wrkMasts.stream().map(WrkMast::getWrkNo).collect(Collectors.toSet());
			// // 获取LED线程
			// LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getId());
			// // 相同工作号集合则过滤
			//// if (CollectionUtils.equals(ledThread.getWorkNos(), workNos)) {
			//// continue;
			//// }
			// // 命令下发 -------------------------------------------------------------------------------
			// if (!commands.isEmpty()) {
			// String errMsg = "";
			// if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(3, commands))) {
			// News.error(methodName + ":{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			// continue;
			// } else {
			// ledThread.setLedMk(false);
			// }
			//
			//
			}
			//
			// try {
			// // 修改主档led标记
			// for (WrkMast wrkMast : wrkMasts) {
			// wrkMast.setOveMk("Y");
			// wrkMast.setModiTime(new Date());
			// if (wrkMastMapper.updateById(wrkMast) == 0) {
			// throw new CoolException("更新工作档失败");
			// }
			// }
			//
			// // 更新线程当前工作号集合
			// ledThread.setWorkNos(workNos);
			//
			// } catch (Exception e) {
			// e.printStackTrace();
			// TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			// }

			}
			}
			@@ -1315,8 +1715,7 @@
			/**
			* 其他 ===>> LED显示器复位，显示默认信息
			*/
			@Async
			public void ledReset() {
			public synchronized void ledReset() {
			// for (LedSlave led : slaveProperties.getLed()) {
			// // 获取输送线plc线程
			// DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, led.getDevpPlcId());
			@@ -1340,7 +1739,7 @@
			// // led显示默认内容
			// if (reset) {
			// if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(2, new ArrayList<>()))) {
			// log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			// News.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			// }
			// }
			// }
			@@ -1355,22 +1754,31 @@
			if (staProtocol == null) {
			continue;
			}
			if (staProtocol.getWorkNo() != 0) {
			if (staProtocol.getWorkNo() != 0 && staProtocol.isLoading()) {
			reset = false;
			break;
			}
			}
			// 获取led线程
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getDevpPlcId());
			// led显示默认内容
			if (reset && !ledThread.isLedMk()) {
			ledThread.setLedMk(true);
			if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(2, new ArrayList<>()))) {
			log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			} else {

			}
			}
			// // 获取led线程
			// LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getId());
			// // led显示默认内容
			// if (reset && !ledThread.isLedMk()) {
			// if (led.getId() == 7) {
			// ledThread.setLedMk(true);
			// if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(4, new ArrayList<>()))) {
			// News.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			// } else {
			//
			// }
			// } else {
			// ledThread.setLedMk(true);
			// if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(2, new ArrayList<>()))) {
			// News.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			// } else {
			//
			// }
			// }
			// }
			}
			}

			@@ -1379,15 +1787,16 @@
			* tip：同步
			*/
			@Transactional
			public synchronized void moveLocForDeepLocPakin(CrnSlave crn, LocMast shallowLoc, WrkMast pakinWrkMast){
			public synchronized void moveLocForDeepLocPakin(CrnSlave crn, LocMast shallowLoc, WrkMast pakinWrkMast) {
			LocMast loc = locMastService.selectById(pakinWrkMast.getLocNo());

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			Date now = new Date();
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setIoTime(now);
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(15D);
			@@ -1397,12 +1806,12 @@
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D")?"Y":"N"); // 空板
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setCtnNo("Y"); // 入库阻塞库位移转标记
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			wrkMast.setAppeTime(now);
			wrkMast.setModiTime(now);
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			@@ -1413,11 +1822,11 @@
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setQty(locDetl.getQty());
			wrkDetl.setIoTime(now);
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			wrkDetl.setAppeTime(now);
			wrkDetl.setModiTime(now);
			if (!wrkDetlService.insert(wrkDetl)) {
			throw new CoolException("保存工作档明细失败");
			}
			@@ -1426,8 +1835,8 @@
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("S"); // S.入库预约，入库阻塞库位移转
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)){
			shallowLoc.setModiTime(now);
			if (!locMastService.updateById(shallowLoc)) {
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			@@ -1453,151 +1862,180 @@
			* 因双深库位阻塞，对浅库位进行移转（立即执行版)
			* tip：同步
			*/
			private void moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc){
			List<Integer> rows = locMastService.queryDistinctRow(crn.getId());
			LocMast loc = null;
			for (Integer row : rows) {
			if (Utils.isDeepLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
			private synchronized void moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc) {
			try {
			List<Integer> rows = locMastService.queryDistinctRow(crn.getId());
			LocMast loc = null;
			for (Integer row : rows) {
			if (Utils.isDeepLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());

			if (loc !=null) {
			if (Utils.isDeepLoc(slaveProperties, loc.getLocNo())){
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, loc.getLocNo());
			LocMast shallowLoc1 = locMastService.selectById(shallowLocNo);
			if(!shallowLoc1.getLocSts().equals("O")){
			loc = null;
			if (loc != null) {
			if (Utils.isDeepLoc(slaveProperties, loc.getLocNo())) {
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, loc.getLocNo());
			LocMast shallowLoc1 = locMastService.selectById(shallowLocNo);
			if (!shallowLoc1.getLocSts().equals("O")) {
			loc = null;
			}
			}
			}
			if (null != loc) {
			break;
			}
			}
			}
			if (null == loc) {
			for (Integer row : rows) {
			if (Utils.isShallowLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());

			if (null != loc) {//对应深库位非在库状态,不能移库
			String deepLoc = Utils.getDeepLoc(slaveProperties, loc.getLocNo());
			LocMast deepLoc1 = locMastService.selectById(deepLoc);
			if (!deepLoc1.getLocSts().equals("F") && !deepLoc1.getLocSts().equals("D")) {
			loc = null;
			}
			}

			if (null != loc) {
			break;
			}
			}
			}


			if (null != loc) { break; }
			}
			}
			if (null == loc) {
			for (Integer row : rows) {
			if (Utils.isShallowLoc(slaveProperties, row)) {
			loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
			if (null != loc) { break; }

			if (null == loc) {
			News.error("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			throw new CoolException("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			}

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			if (!wrkDetlService.insert(wrkDetl)) {
			throw new CoolException("保存工作档明细失败");
			}
			}
			}
			}
			if (null == loc) {
			throw new CoolException("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			}

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			WrkMast wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
			wrkMast.setLocNo(loc.getLocNo()); // 目标库位
			wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D")?"Y":"N"); // 空板
			wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			if (shallowLoc.getLocSts().equals("F")) {
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setQty(locDetl.getQty());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			if (!wrkDetlService.insert(wrkDetl)) {
			throw new CoolException("保存工作档明细失败");
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("R"); // R.出库预约
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)) {
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			}
			}
			// 修改源库位状态
			if (shallowLoc.getLocSts().equals("D") \|\| shallowLoc.getLocSts().equals("F")) {
			shallowLoc.setLocSts("R"); // R.出库预约
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)){
			throw new CoolException("更新源库位状态失败");
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			throw new CoolException("移转失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			} catch (Exception e) {
			News.error("双深库位阻塞，对浅库位进行移转失败", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			throw new CoolException("移转失败");
			}

			}

			/**
			* 堆垛机演示 ===>> 库位移转
			*/
			public synchronized void crnDemoOfLocMove1(){
			for (CrnSlave crn : slaveProperties.getCrn()) {
			if (!crn.getDemo()) { continue; } // 必须为演示状态
			public synchronized void crnDemoOfLocMove1() {
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();
			try {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			if (!crn.getDemo()) {
			continue;
			} // 必须为演示状态

			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) { continue; }

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取移库工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
			if (null != wrkMast) { continue; }

			LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
			LocMast loc = locMastService.queryDemoLoc(crn.getId());
			if (null == sourceLoc \|\| null == loc) { continue; }

			String sourceLocNo = sourceLoc.getLocNo();
			String locNo = loc.getLocNo();

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(sourceLocNo); // 源库位
			wrkMast.setLocNo(locNo); // 目标库位
			wrkMast.setFullPlt("N"); // 满板：Y
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D")?"Y":"N"); // 空板
			wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			throw new CoolException("保存工作档失败");
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			continue;
			}
			// 工作档明细保存

			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取移库工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
			if (null != wrkMast) {
			continue;
			}

			LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
			LocMast loc = locMastService.queryDemoLoc(crn.getId());
			if (null == sourceLoc \|\| null == loc) {
			continue;
			}

			String sourceLocNo = sourceLoc.getLocNo();
			String locNo = loc.getLocNo();

			// 获取工作号
			int workNo = commonService.getWorkNo(0);
			// 保存工作档
			wrkMast = new WrkMast();
			wrkMast.setWrkNo(workNo);
			wrkMast.setIoTime(new Date());
			wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
			wrkMast.setIoType(11); // 入出库状态： 11.库格移载
			wrkMast.setIoPri(13D);
			wrkMast.setCrnNo(crn.getId());
			wrkMast.setSourceLocNo(sourceLocNo); // 源库位
			wrkMast.setLocNo(locNo); // 目标库位
			wrkMast.setFullPlt("N"); // 满板：Y
			wrkMast.setPicking("N"); // 拣料
			wrkMast.setExitMk("N"); // 退出
			wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
			wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
			wrkMast.setLinkMis("N");
			wrkMast.setAppeTime(new Date());
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			News.error(methodName + ":保存工作档失败");
			throw new CoolException("保存工作档失败");
			}
			// 工作档明细保存
			// List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", sourceLocNo));
			// for (LocDetl locDetl : locDetls) {
			// WrkDetl wrkDetl = new WrkDetl();
			@@ -1611,36 +2049,48 @@
			// throw new CoolException("保存工作档明细失败");
			// }
			// }
			// 修改源库位状态
			if (sourceLoc.getLocSts().equals("D")) {
			sourceLoc.setLocSts("R"); // R.出库预约
			sourceLoc.setModiTime(new Date());
			if (!locMastService.updateById(sourceLoc)){
			throw new CoolException("更新源库位状态失败");
			}
			} else {
			throw new CoolException("源库位出库失败");
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			throw new CoolException("移转失败");
			}
			// 修改源库位状态
			if (sourceLoc.getLocSts().equals("D")) {
			sourceLoc.setLocSts("R"); // R.出库预约
			sourceLoc.setModiTime(new Date());
			if (!locMastService.updateById(sourceLoc)) {
			News.error(methodName + ":更新源库位状态失败");

			throw new CoolException("更新源库位状态失败");
			}
			} else {
			News.error(methodName + ":源库位出库失败");

			throw new CoolException("源库位出库失败");
			}
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			News.error(methodName + ":更新目标库位状态失败");

			throw new CoolException("更新目标库位状态失败");
			}
			} else {
			News.error(methodName + ":移转失败");

			throw new CoolException("移转失败");
			}

			}
			}

			} catch (Exception e) {
			News.error(methodName + ":堆垛机演示 ===>> 库位移转失败", e);
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}

			/**
			* 堆垛机命令下发后，异步修改工作档状态
			*/
			public synchronized void crnIoWrkMast(){
			public synchronized void crnIoWrkMast() {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			@@ -1653,30 +2103,32 @@
			if (crnProtocol.getStatusType() != CrnStatusType.IDLE && crnProtocol.getTaskNo() != 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			// 获取工作档
			WrkMast wrkMast = wrkMastMapper.selectById(crnProtocol.getTaskNo());
			if (wrkMast == null) { continue; }
			if (wrkMast == null) {
			continue;
			}
			// 入库
			if (wrkMast.getWrkSts() == 1 \|\| wrkMast.getWrkSts() == 2) {
			log.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			News.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			// 修改工作档状态 2.设备上走 => 3.吊车入库中
			wrkMast.setWrkSts(3L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error("修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			log.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			News.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			}
			// 出库、移库
			if (wrkMast.getWrkSts() == 11) {
			log.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			News.warn("堆垛机非空闲情况下，开始修改工作档状态。[id:{},时间：{}] >>>>> 堆垛机当前状态为：{}。任务号:{}", crn.getId(), DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), crnProtocol.getStatusType().desc, crnProtocol.getTaskNo());
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			wrkMast.setWrkSts(12L);
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error("修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			log.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			News.warn("修改工作档状态成功。[时间：{}] >>>>> 任务号:{}", DateUtils.convert(now, DateUtils.yyyyMMddHHmmsssss_F), wrkMast.getWrkNo());
			}


			@@ -1688,46 +2140,73 @@
			/**
			* 入出库模式切换函数
			*/
			public void ioConvert() {
			try {
			// 根据输送线plc遍历
			for (DevpSlave devp : slaveProperties.getDevp()) {
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			// public synchronized void ioConvert() {
			// try {
			// // 根据输送线plc遍历
			// for (DevpSlave devp : slaveProperties.getDevp()) {
			// SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			//
			// for (DevpSlave.Sta inSta : devp.getInSta()) {
			// if (inSta.getStaNo() == 2) {
			// continue;
			// }
			// WrkMast pakout = wrkMastMapper.selectWorkingPakout(inSta.getStaNo());
			// switch (inSta.getStaNo()) {
			// case 203://1F
			// if (pakout != null) {
			// if (devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
			// // 出库切换中
			// devpThread.ioModeOf2F = IoModeType.PAKOUT_BOOTING;
			// WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
			// if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
			// && !devpThread.getStation().get(inSta.getStaNo() + 1).isLoading()
			// && devpThread.getStation().get(inSta.getStaNo() + 1).getWorkNo() == 0) {
			// // 出库模式
			// devpThread.ioModeOf2F = IoModeType.PAKOUT_MODE;
			// }
			// }
			// } else {
			// // 入库模式
			// devpThread.ioModeOf2F = IoModeType.PAKIN_MODE;
			// }
			// break;
			// case 401://1F
			// if (pakout != null) {
			// if (devpThread.ioModeOf4F != IoModeType.PAKOUT_MODE) {
			// // 出库切换中
			// devpThread.ioModeOf4F = IoModeType.PAKOUT_BOOTING;
			// WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
			// if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
			// && !devpThread.getStation().get(inSta.getStaNo() + 1).isLoading()
			// && devpThread.getStation().get(inSta.getStaNo() + 1).getWorkNo() == 0) {
			// // 出库模式
			// devpThread.ioModeOf4F = IoModeType.PAKOUT_MODE;
			// }
			// }
			// } else {
			// // 入库模式
			// devpThread.ioModeOf4F = IoModeType.PAKIN_MODE;
			// }
			// break;
			// }
			// }
			//
			// }
			//
			// } catch (Exception e) {
			// e.printStackTrace();
			// }
			//
			//
			// }

			WrkMast pakout = wrkMastMapper.selectWorkingPakout();
			if (pakout != null) {
			if (devpThread.ioMode != IoModeType.PAKOUT_MODE) {
			// 出库切换中
			devpThread.ioMode = IoModeType.PAKOUT_BOOTING;

			WrkMast pakin = wrkMastMapper.selectWorkingPakin();
			if (pakin == null) {
			// 出库模式
			devpThread.ioMode = IoModeType.PAKOUT_MODE;
			}
			}
			} else {
			// 入库模式
			devpThread.ioMode = IoModeType.PAKIN_MODE;
			}
			}

			} catch (Exception e) {
			e.printStackTrace();
			}


			}



			public void outOfDevp() {
			public synchronized void outOfDevp() {
			List<WrkMast> wrkMasts = wrkMastMapper.selectPick();
			for (WrkMast wrkMast : wrkMasts) {
			if (basDevpService.selectCount(new EntityWrapper<BasDevp>().eq("wrk_no", wrkMast.getWrkNo())) == 0) {
			wrkMast.setCtnNo("Y");
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			log.error("修改{}工作档失败，ctn_no", wrkMast.getWrkNo());
			News.error("修改{}工作档失败，ctn_no", wrkMast.getWrkNo());
			}
			}

			@@ -1735,4 +2214,82 @@
			}


			public synchronized void autoEmptyOut() {
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			String methodName = Thread.currentThread().getStackTrace()[1].getMethodName();

			Integer autoOutSite = 12;
			//如果站点可出禁用，则不生成空盘出库任务
			StaProtocol staProtocol = devpThread.getStation().get(autoOutSite);
			if (staProtocol == null) {
			return;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing() //自动
			&& !staProtocol.isLoading() //无物
			&& staProtocol.isOutEnable() //可出信号
			&& staProtocol.getWorkNo() == 0
			) {
			WrkMast pakoutEmpty = wrkMastMapper.selectPakoutEmpty(autoOutSite);
			if (null != pakoutEmpty) {
			return;
			}
			try {
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/auto/emptyOut/v1")
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			JSONObject data = (JSONObject) jsonObject.get("data");
			News.info((String) data.get("msg"));
			} else {
			News.error(methodName + ":请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1", "", response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			}

			public synchronized void autoEmptyIn() {
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, 1);
			Integer autoInSite = 12;
			StaProtocol staProtocol = devpThread.getStation().get(autoInSite);
			if (staProtocol == null) {
			return;
			} else {
			staProtocol = staProtocol.clone();
			}
			if (staProtocol.isAutoing() //自动
			&& staProtocol.isLoading() //有物
			&& staProtocol.isInEnable() //可入信号
			&& (staProtocol.getWorkNo() == 0 \|\| staProtocol.getWorkNo() > 9990) //工作号为0或者工作号是9991~9999（输送机留用）
			) {

			try {
			LocTypeDto locTypeDto = new LocTypeDto((short) 1, (short) 1, (short) 1);


			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/auto/emptyIn/v1")
			.setJson(JSON.toJSONString(locTypeDto))
			.build()
			.doPost();
			JSONObject jsonObject = JSON.parseObject(response);
			if (jsonObject.getInteger("code").equals(200)) {
			News.info((String) jsonObject.get("msg"));
			} else {
			News.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyIn/v1", JSON.toJSONString(locTypeDto), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			}
			}
			}