#

lty

2025-09-25 8478a159d79bf9ca5da04ab18562f2d7cdddb05c

 src/main/java/com/zy/core/thread/RgvThread.java

@@ -59,6 +59,8 @@
    private boolean PakOut = true;
    //根据距离跳过取货
    private boolean PakRgv = true;
    //接驳标记
    private boolean PakToCrn = true;

    public RgvThread(RgvSlave slave) {
        this.slave = slave;
@@ -80,17 +82,9 @@
                    case 1:
                        readStatus();
                        break;
                    // 工位1、2写入数据
                    // 小车工位写入数据
                    case 2:
                        write12((RgvCommand) task.getData());
                        break;
                    //工位1写入数据
                    case 4:
                        write1((RgvCommand) task.getData());
                        break;
//                    //工位2写入数据
                    case 5:
                        write2((RgvCommand) task.getData());
                        write((RgvCommand) task.getData());
                        break;
                    // 复位
                    case 3:
@@ -99,77 +93,11 @@
                            command = new RgvCommand();
                        }
                        command.setRgvNo(slave.getId()); // RGV编号
                        command.setTaskNo1(0); // 工作号
                        command.setAckFinish1(true);  // 任务完成确认位
                        command.setTaskStatus1(RgvTaskStatusType.NONE); // 任务模式
                        command.setTargetPosition1( 0);     // 源站
                        command.setEndStaNo1(0);     // 目标站
                        command.setWrkTaskMove1((short) 0);
                        command.setWrkTaskPri((short)0);
                        command.setCommand(false);
                        write1(command);
                        break;
                    case 6:
                        RgvCommand command2 = (RgvCommand) task.getData();
                        if (null == command2) {
                            command2 = new RgvCommand();
                        }
                        command2.setRgvNo(slave.getId()); // RGV编号
                        command2.setTaskNo2(0); // 工作号
                        command2.setAckFinish2(true);  // 任务完成确认位
                        command2.setTaskStatus2(RgvTaskStatusType.NONE); // 任务模式
                        command2.setTargetPosition2( 0);     // 源站
                        command2.setEndStaNo2(0);     // 目标站
                        command2.setWrkTaskPri((short)0);
                        command2.setWrkTaskMove2((short)0);
                        command2.setCommand(false);
                        write2(command2);
                        break;
                    case 7: //工位1取货确认
                        RgvCommand command3 = (RgvCommand) task.getData();
                        if (null == command3) {
                            command3 = new RgvCommand();
                        }
                        command3.setRgvNo(slave.getId()); // RGV编号
                        command3.setAckFinish1(true);  // 任务完成确认位
                        command3.setTaskStatus1(RgvTaskStatusType.NONE); // 任务模式
                        command3.setTargetPosition1( 0);     // 源站
                        command3.setCommand(false);
                        command3.setWrkTaskPri((short)0);
                        write1(command3);
                        break;
                    case 8 :
                        RgvCommand command4 = (RgvCommand) task.getData();
                        if (null == command4) {
                            command4 = new RgvCommand();
                        }
                        command4.setRgvNo(slave.getId()); // RGV编号
                        command4.setAckFinish2(true);  // 任务完成确认位
                        command4.setTaskStatus2(RgvTaskStatusType.NONE); // 任务模式
                        command4.setTargetPosition2( 0);     // 小车目标站清零
                        command4.setCommand(false);
                        command4.setWrkTaskPri((short)0);
                        write2(command4);
                        break;
                    // 回原点  避让
                    case 9:
//                        RgvCommand commandAvoidanceXY = (RgvCommand) task.getData();
//                        if (null == commandAvoidanceXY) {
//                            commandAvoidanceXY = new RgvCommand();
//                        }
//                        commandAvoidanceXY.setRgvNo(slave.getId()); // RGV编号
//                        commandAvoidanceXY.setTaskNo1((short) 9999); // 工作号
//                        commandAvoidanceXY.setAckFinish1((short) 1);  // 任务完成确认位
//                        commandAvoidanceXY.setTaskMode1(RgvTaskModeType.GO_ORIGIN); // 任务模式
//                        commandAvoidanceXY.setSourceStaNo1((short)0);     // 源站
//                        commandAvoidanceXY.setDestinationStaNo1((short)0);     // 目标站
////                        commandAvoidanceXY.setTaskNo2((short) 0); // 工作号
////                        commandAvoidanceXY.setAckFinish2((short) 1);  // 任务完成确认位
////                        commandAvoidanceXY.setTaskMode2(RgvTaskModeType.GO_ORIGIN); // 任务模式
////                        commandAvoidanceXY.setSourceStaNo2((short)0);     // 源站
////                        commandAvoidanceXY.setDestinationStaNo2((short)0);     // 目标站
//                        commandAvoidanceXY.setCommand((short)0);
//                        write(commandAvoidanceXY);
                        command.setTaskNo(0); // 工作号
                        command.setTaskStatus(RgvTaskStatusType.NONE); // 任务模式
                        command.setTargetPosition(0);     // 源站
                        command.setWrkTaskPri(0);     // 目标站
                        write(command);
                        break;
                    default:
                        break;
@@ -262,10 +190,8 @@
                rgvProtocol.setRgvPos(siemensNet.getByteTransform().TransInt32(result.Content, 4));
                rgvProtocol.setRgvPosDestination( siemensNet.getByteTransform().TransInt32(result.Content, 8));
                rgvProtocol.setStatus1(siemensNet.getByteTransform().TransInt16(result.Content, 12));
                rgvProtocol.setStatus2(siemensNet.getByteTransform().TransInt16(result.Content, 14));
                rgvProtocol.setTaskNo1(siemensNet.getByteTransform().TransInt32(result.Content, 16));
                rgvProtocol.setTaskNo2(siemensNet.getByteTransform().TransInt32(result.Content, 20));

                boolean[] status1 = siemensNet.getByteTransform().TransBool(result.Content, 24, 2);
                rgvProtocol.setLoaded1(status1[0]);
                rgvProtocol.setLoaded2(status1[1]);
@@ -277,58 +203,7 @@
                rgvProtocol.setErr5(status2[4]);
                rgvProtocol.setErr6(status2[5]);
                rgvProtocol.setErr7(status2[6]);
//                boolean[] status3 = siemensNet.getByteTransform().TransBool(result.Content, 27, 1);
//                rgvProtocol.setErr1(status3[0]);
//                rgvProtocol.setErr2(status3[1]);
//                rgvProtocol.setErr3(status3[2]);
//                rgvProtocol.setErr4(status3[3]);
//                rgvProtocol.setErr5(status3[4]);
//                rgvProtocol.setErr6(status3[5]);
//                rgvProtocol.setErr7(status3[6]);


//                rgvProtocol.setWalkPos(siemensNet.getByteTransform().TransInt16(result.Content, 12));
//                rgvProtocol.setAlarm(siemensNet.getByteTransform().TransInt16(result.Content, 14));
//                rgvProtocol.setTaskNo2(siemensNet.getByteTransform().TransInt16(result.Content, 4));
//                rgvProtocol.setLoaded2(siemensNet.getByteTransform().TransInt16(result.Content, 8));
//                rgvProtocol.setStatus2(siemensNet.getByteTransform().TransInt16(result.Content, 16));
//                rgvProtocol.setxSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 18));
//                rgvProtocol.setAlarm(siemensNet.getByteTransform().TransInt16(result.Content, 20));
//                rgvProtocol.setxDistance(siemensNet.getByteTransform().TransInt16(result.Content, 22));
//                rgvProtocol.setTemp1(siemensNet.getByteTransform().TransInt16(result.Content, 24));
//                rgvProtocol.setTemp2(siemensNet.getByteTransform().TransInt16(result.Content, 26));
//                rgvProtocol.setTemp3(siemensNet.getByteTransform().TransInt16(result.Content, 28));
//                rgvProtocol.setTemp4(siemensNet.getByteTransform().TransInt16(result.Content, 30));
//                rgvProtocol.setTemp5(siemensNet.getByteTransform().TransInt16(result.Content, 32));
//                rgvProtocol.setxSpeed(siemensNet.getByteTransform().TransInt16(result.Content, 28));
//                rgvProtocol.setxDistance(siemensNet.getByteTransform().TransInt16(result.Content, 40));
//                rgvProtocol.setxDuration(siemensNet.getByteTransform().TransInt16(result.Content, 48));

                OutputQueue.RGV.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功", DateUtils.convert(new Date()), slave.getId()));

                // 工位1复位信号
                if (rgvProtocol.getStatusType1().equals(RgvStatusType.WAITING)
                        || rgvProtocol.getStatusType1().equals(RgvStatusType.FETCHWAITING)) {
                    if (resetFlag1) {
                        RgvCommand rgvCommand = new RgvCommand();
                        rgvCommand.setAckFinish1(true);
                        if (write1(rgvCommand)) {
                            resetFlag1 = false;
                        }
                    }
                }

//                 工位2复位信号
                if (rgvProtocol.getStatusType2().equals(RgvStatusType.WAITING)
                        || rgvProtocol.getStatusType2().equals(RgvStatusType.FETCHWAITING)) {
                    if (resetFlag2) {
                        RgvCommand rgvCommand = new RgvCommand();
                        rgvCommand.setAckFinish2(true);
                        if (write2(rgvCommand)) {
                            resetFlag2 = false;
                        }
                    }
                }

                try {
                    // 根据实时信息更新数据库
@@ -355,53 +230,29 @@
            initRgv();
        }
    }

    /**
     * 工位1、2同时写入数据
     * 小车工位写入写入数据
     */
    private boolean write12(RgvCommand command) throws InterruptedException {
    private boolean write(RgvCommand command) throws InterruptedException {
        if (null == command) {
            log.error("RGV写入命令为空");
            return false;
        }

        OperateResultExOne<byte[]> result1 = siemensNet.Read("DB100.0", (short) 34);
//        OperateResultExOne<byte[]> result4 = siemensNet.Read("DB100.10", (short) 2);
        OperateResultExOne<byte[]> result1 = siemensNet.Read("DB100.0", (short) 39);
        if (result1.IsSuccess){
            RgvCommand one = new RgvCommand();
            one.setTargetPosition1(siemensNet.getByteTransform().TransInt32(result1.Content, 0));
            one.setEndStaNo1(siemensNet.getByteTransform().TransInt32(result1.Content, 4));
            one.setTaskStatus1(siemensNet.getByteTransform().TransInt16(result1.Content, 8));
            one.setTaskNo1(siemensNet.getByteTransform().TransInt32(result1.Content, 10));
            one.setDirection1(siemensNet.getByteTransform().TransInt16(result1.Content, 14));
            one.setTargetPosition2(siemensNet.getByteTransform().TransInt32(result1.Content, 16));
            one.setEndStaNo2(siemensNet.getByteTransform().TransInt32(result1.Content, 20));
            one.setTaskStatus2(siemensNet.getByteTransform().TransInt16(result1.Content, 24));
            one.setTaskNo2(siemensNet.getByteTransform().TransInt32(result1.Content, 26));
            one.setDirection2(siemensNet.getByteTransform().TransInt16(result1.Content, 30));

            News.error("RGV命令下发前读取状态[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
            one.setWrkTaskPri(siemensNet.getByteTransform().TransInt32(result1.Content, 0));//执行工位
            one.setTargetPosition(siemensNet.getByteTransform().TransInt32(result1.Content, 4));//行走目标站
            one.setTaskStatus(siemensNet.getByteTransform().TransInt16(result1.Content, 8));//小车状态
            one.setTaskNo(siemensNet.getByteTransform().TransInt32(result1.Content, 10));//下发工作号
            News.info("RGV命令下发前读取状态[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
        }
        OperateResult result2 = siemensNet.Write("DB100.34", false);
        if (result2.IsSuccess){
            News.error("下发前把车子确认位置为false");
        }
        byte[] writeBytes = new byte[36];
        byte[] writeBytes = new byte[14];
        command.setRgvNo(slave.getId());
        siemensNet.getByteTransform().TransInt32(writeBytes, 0, command.getTargetPosition1());
        siemensNet.getByteTransform().TransInt32(writeBytes, 4, command.getEndStaNo1());
        siemensNet.getByteTransform().TransInt16(writeBytes, 8, command.getTaskStatus1());
        siemensNet.getByteTransform().TransInt32(writeBytes, 10, command.getTaskNo1());
        siemensNet.getByteTransform().TransInt16(writeBytes, 14, command.getDirection1());
        setBool(writeBytes, 32, 0, command.getAckFinish1());
        siemensNet.getByteTransform().TransInt32(writeBytes, 16, command.getTargetPosition2());
        siemensNet.getByteTransform().TransInt32(writeBytes, 20, command.getEndStaNo2());
        siemensNet.getByteTransform().TransInt16(writeBytes, 24, command.getTaskStatus2());
        siemensNet.getByteTransform().TransInt32(writeBytes, 26, command.getTaskNo2());
        siemensNet.getByteTransform().TransInt16(writeBytes, 30, command.getDirection2());
        setBool(writeBytes, 32, 1, command.getAckFinish2());
        siemensNet.getByteTransform().TransInt16(writeBytes, 36, command.getWrkTaskPri());

        writeInt32(writeBytes, 0, command.getWrkTaskPri());
        writeInt32(writeBytes, 4, command.getTargetPosition());
        writeInt16(writeBytes, 8, (short)command.getTaskStatus());
        writeInt32(writeBytes, 10, command.getTaskNo());
        OperateResult result = siemensNet.Write("DB100.0", writeBytes);

        if (!result.IsSuccess){
@@ -415,31 +266,18 @@
        //RGV任务写入后，回读一次，看是否成功
        Thread.sleep(400);
        try {
            OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.0", (short) 36);
            OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.0", (short) 14);
            if (resultRead.IsSuccess){
                RgvCommand one = new RgvCommand();
                one.setDirection1(siemensNet.getByteTransform().TransInt16(resultRead.Content, 14));
                one.setTaskNo1(siemensNet.getByteTransform().TransInt32(resultRead.Content, 10));
                one.setTaskStatus1(siemensNet.getByteTransform().TransInt16(resultRead.Content, 8));
                one.setEndStaNo1(siemensNet.getByteTransform().TransInt32(resultRead.Content, 4));
                one.setTargetPosition1(siemensNet.getByteTransform().TransInt32(resultRead.Content, 0));
                one.setWrkTaskPri(siemensNet.getByteTransform().TransInt16(resultRead.Content, 36));
                one.setDirection2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 30));
                one.setTaskNo2(siemensNet.getByteTransform().TransInt32(resultRead.Content, 26));
                one.setTaskStatus2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 24));
                one.setEndStaNo2(siemensNet.getByteTransform().TransInt32(resultRead.Content, 20));
                one.setTargetPosition2(siemensNet.getByteTransform().TransInt32(resultRead.Content, 16));
                one.setWrkTaskPri(siemensNet.getByteTransform().TransInt32(resultRead.Content, 0));//执行工位
                one.setTargetPosition(siemensNet.getByteTransform().TransInt32(resultRead.Content, 4));//行走目标站
                one.setTaskStatus(siemensNet.getByteTransform().TransInt16(resultRead.Content, 8));//小车状态
                one.setTaskNo(siemensNet.getByteTransform().TransInt32(resultRead.Content, 10));//下发工作号
                if (
                        !command.getDirection1().equals(one.getDirection1()) ||
                                !command.getTaskNo1().equals(one.getTaskNo1()) ||
                                !command.getTaskStatus1().equals(one.getTaskStatus1()) ||
                                !command.getEndStaNo1().equals(one.getEndStaNo1()) ||
                                !command.getTargetPosition1().equals(one.getTargetPosition1()) ||
                                !command.getDirection2().equals(one.getDirection2()) ||
                                !command.getTaskNo2().equals(one.getTaskNo2()) ||
                                !command.getTaskStatus2().equals(one.getTaskStatus2()) ||
                                !command.getEndStaNo2().equals(one.getEndStaNo2()) ||
                                !command.getTargetPosition2().equals(one.getTargetPosition2())
                        !command.getTaskNo().equals(one.getTaskNo()) ||
                        !command.getTaskStatus().equals(one.getTaskStatus()) ||
                        !command.getWrkTaskPri().equals(one.getWrkTaskPri()) ||
                        !command.getTargetPosition().equals(one.getTargetPosition())
                ) {
                    try{
                        News.error("RGV命令地址写入后回读失败[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
@@ -451,7 +289,7 @@
                        }
                    }
                    News.error("Rgv命令回读失败后，重新添加任务到队列 ===>> [id:{}],{}", slave.getId(), JSON.toJSON(command));
                    MessageQueue.offer(SlaveType.Rgv, slave.getId(), new Task(4, command));
                    MessageQueue.offer(SlaveType.Rgv, slave.getId(), new Task(2, command));
                    Thread.sleep(100);
                    readStatus();
                    return false;
@@ -463,54 +301,46 @@
            News.error("RGV命令地址写入后回读出错");
        }

        if (command.getAckFinish1() || command.getAckFinish2()) {
            if (result.IsSuccess) {
                Thread.sleep(300);
                //任务下发次数
                int writeCount2 = 0;

                do {
                    writeCount2++;
                    boolean commandFinish = false;
                    boolean commandFinish2 = false;
                    result = siemensNet.Write("DB100.DBX32.0", commandFinish);
                    OperateResult result3 = siemensNet.Write("DB100.DBX32.1", commandFinish);

                    if(result.IsSuccess && result3.IsSuccess){
                        //RGV任务写入后，回读一次，看是否成功
                        Thread.sleep(200);
                        OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.32", (short) 2);
                        if (resultRead.IsSuccess) {
                            commandFinish=siemensNet.getByteTransform().TransBool(resultRead.Content, 0);
                            commandFinish2=siemensNet.getByteTransform().TransBool(resultRead.Content, 1);

                            if (!commandFinish && !commandFinish2) {
                                News.error("RGV任务确认位"+commandFinish+"写入数据与回读数据不一致！"+"循环执行次数:"+writeCount2+"次");
                            }else{
                                //任务命令写入成功
                                News.info("RGV任务确认位"+commandFinish+"回读成功！"+"循环执行次数:"+writeCount2+"次");
                                break;
                            }
                        }else {
                            News.error("RGV任务确认位"+commandFinish+"回读失败！"+"循环执行次数:"+writeCount2+"次");
        if (result.IsSuccess) {  //任务下发确认
            Thread.sleep(300);
            //任务下发次数
            int writeCount2 = 0;
            do {
                writeCount2++;
                boolean commandFinish = true;
                result = siemensNet.Write("DB100.34.0", commandFinish);
                if(result.IsSuccess){
                    //RGV任务写入后，回读一次，看是否成功
                    Thread.sleep(200);
                    OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.34", (short) 2);
                    if (resultRead.IsSuccess) {
                        commandFinish=siemensNet.getByteTransform().TransBool(resultRead.Content, 0);
                        if (!commandFinish){
                            News.error("RGV任务确认位"+commandFinish+"写入数据与回读数据不一致！"+"循环执行次数:"+writeCount2+"次");
                        }else{
                            //任务命令写入成功
                            News.info("RGV任务确认位"+commandFinish+"回读成功！"+"循环执行次数:"+writeCount2+"次");
                            break;
                        }
                    } else {
                        News.error("RGV任务确认位"+commandFinish+"写入失败！"+"循环执行次数:"+writeCount2+"次");
                    }else {
                        News.error("RGV任务确认位"+commandFinish+"回读失败！"+"循环执行次数:"+writeCount2+"次");
                    }
                }while (writeCount2<5);
            }
                } else {
                    News.error("RGV任务确认位"+commandFinish+"写入失败！"+"循环执行次数:"+writeCount2+"次");
                }
            }while (writeCount2<5);
        }


        try {
            // 日志记录
            BasRgvOptService bean = SpringUtils.getBean(BasRgvOptService.class);
            BasRgvOpt basRgvOpt = new BasRgvOpt(
                    command.getTaskNo1(),
                    command.getTaskNo2(),
                    command.getTaskNo(),
                    command.getRgvNo(),
                    new Date(),
                    command.getTargetPosition1()
                    command.getTaskStatus().toString(),
                    command.getTargetPosition(),
                    command.getWrkTaskPri(),
                    new Date()
            );
            bean.insert(basRgvOpt);
        } catch (Exception ignore) {
@@ -520,338 +350,12 @@
        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("RGV 工位1命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 工位12命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            log.info("RGV 工位命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 工位命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
        } else {
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】写入RGV plc工位12数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入RGV plc工位1数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }

    /**
     * 工位1写入数据
     */
    private boolean write1(RgvCommand command) throws InterruptedException {
        if (null == command) {
            log.error("RGV写入命令为空");
            return false;
        }

        OperateResultExOne<byte[]> result1 = siemensNet.Read("DB100.0", (short) 34);
//        OperateResultExOne<byte[]> result4 = siemensNet.Read("DB100.10", (short) 2);
        if (result1.IsSuccess){
            RgvCommand one = new RgvCommand();
            one.setTargetPosition1(siemensNet.getByteTransform().TransInt32(result1.Content, 0));
            one.setEndStaNo1(siemensNet.getByteTransform().TransInt32(result1.Content, 4));
            one.setTaskStatus1(siemensNet.getByteTransform().TransInt16(result1.Content, 8));
            one.setTaskNo1(siemensNet.getByteTransform().TransInt32(result1.Content, 10));
            one.setDirection1(siemensNet.getByteTransform().TransInt16(result1.Content, 14));
            one.setWrkTaskMove1(siemensNet.getByteTransform().TransInt16(result1.Content, 36));
//                one.setAckFinish1(siemensNet.getByteTransform().TransInt16(resultRead.Content, 0));
//            one.setTaskNo1(siemensNet.getByteTransform().TransInt16(result3.Content, 2));
//            one.setTaskMode1(siemensNet.getByteTransform().TransInt16(result3.Content, 4));
//            one.setSourceStaNo1(siemensNet.getByteTransform().TransInt16(result3.Content, 6));
//            one.setDestinationStaNo1(siemensNet.getByteTransform().TransInt16(result3.Content, 8));
//            one.setCommand(siemensNet.getByteTransform().TransInt16(result4.Content, 0));

            News.error("RGV命令下发前读取状态[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
        }


        OperateResult result2 = siemensNet.Write("DB100.34", false);
        if (result2.IsSuccess){
            News.error("下发前把车子确认位置为false");
        }
        byte[] writeBytes = new byte[34];
        command.setRgvNo(slave.getId());

        writeInt32(writeBytes, 0, command.getTargetPosition1());
        writeInt32(writeBytes, 4, command.getEndStaNo1());
        writeInt16(writeBytes, 8, (short)command.getTaskStatus1());
        writeInt32(writeBytes, 10, command.getTaskNo1());
        writeInt16(writeBytes, 14, (short)command.getDirection1());
        writeBool(writeBytes, 32, 0, command.getAckFinish1());
        writeInt16(writeBytes, 36, (short)command.getWrkTaskMove1());

        OperateResult result = siemensNet.Write("DB100.0", writeBytes);


        if (!result.IsSuccess){
            News.error("写入RGVplc数据失败，重新添加任务到队列 ===> [id:{}],{}",slave.getId(),JSON.toJSON(command));
            MessageQueue.offer(SlaveType.Rgv,slave.getId(),new Task(4,command));
            Thread.sleep(100);
            readStatus();
            return false;
        }

        //RGV任务写入后，回读一次，看是否成功
        Thread.sleep(400);
        try {
            OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.0", (short) 34);
            if (resultRead.IsSuccess){
                RgvCommand one = new RgvCommand();
                one.setWrkTaskMove1(siemensNet.getByteTransform().TransInt16(resultRead.Content, 36));
                one.setDirection1(siemensNet.getByteTransform().TransInt16(resultRead.Content, 14));
                one.setTaskNo1(siemensNet.getByteTransform().TransInt32(resultRead.Content, 10));
                one.setTaskStatus1(siemensNet.getByteTransform().TransInt16(resultRead.Content, 8));
                one.setEndStaNo1(siemensNet.getByteTransform().TransInt32(resultRead.Content, 4));
                one.setTargetPosition1(siemensNet.getByteTransform().TransInt32(resultRead.Content, 0));
                if (
                        !command.getDirection1().equals(one.getDirection1()) ||
                                !command.getTaskNo1().equals(one.getTaskNo1()) ||
                                !command.getTaskStatus1().equals(one.getTaskStatus1()) ||
                                !command.getEndStaNo1().equals(one.getEndStaNo1()) ||
                                !command.getTargetPosition1().equals(one.getTargetPosition1()) ||
                                !command.getWrkTaskMove1().equals(one.getWrkTaskMove1())
                ) {
                    try{
                        News.error("RGV命令地址写入后回读失败[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
                    }catch (Exception e){
                        try{
                            News.error("日志打印失败：===>>参数one报错 [id:{}],{}", slave.getId(), JSON.toJSON(command),JSON.toJSON(resultRead));
                        }catch (Exception e1){
                            News.error("日志打印失败：===>> [id:{}],{}", slave.getId(), JSON.toJSON(command));
                        }
                    }
                    News.error("Rgv命令回读失败后，重新添加任务到队列 ===>> [id:{}],{}", slave.getId(), JSON.toJSON(command));
                    MessageQueue.offer(SlaveType.Rgv, slave.getId(), new Task(4, command));
                    Thread.sleep(100);
                    readStatus();
                    return false;
                }else {
                    News.info("RGV命令地址写入后回读成功[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
                }
            }
        }catch (Exception e){
            News.error("RGV命令地址写入后回读出错");
        }

        if (command.getAckFinish1()) {
            if (result.IsSuccess) {
                Thread.sleep(300);
                //任务下发次数
                int writeCount2 = 0;

                do {
                    writeCount2++;
                    boolean commandFinish = false;
                    result = siemensNet.Write("DB100.32.0", commandFinish);
                    if(result.IsSuccess){
                        //RGV任务写入后，回读一次，看是否成功
                        Thread.sleep(200);
                        OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.32", (short) 2);
                        if (resultRead.IsSuccess) {
                            commandFinish=siemensNet.getByteTransform().TransBool(resultRead.Content, 0);
                            if (commandFinish){
                                News.error("RGV任务确认位"+commandFinish+"写入数据与回读数据不一致！"+"循环执行次数:"+writeCount2+"次");
                            }else{
                                //任务命令写入成功
                                News.info("RGV任务确认位"+commandFinish+"回读成功！"+"循环执行次数:"+writeCount2+"次");
                                break;
                            }
                        }else {
                            News.error("RGV任务确认位"+commandFinish+"回读失败！"+"循环执行次数:"+writeCount2+"次");
                        }
                    } else {
                        News.error("RGV任务确认位"+commandFinish+"写入失败！"+"循环执行次数:"+writeCount2+"次");
                    }
                }while (writeCount2<5);
            }
        }

//        if (command.getAckFinish1() == 0) {
//            short commandFinish = 1;  //工位1任务写入
//            Thread.sleep(200);
//            result = siemensNet.Write("DB100.10", commandFinish);
//        }

        try {
            // 日志记录
            BasRgvOptService bean = SpringUtils.getBean(BasRgvOptService.class);
            BasRgvOpt basRgvOpt = new BasRgvOpt(
                    command.getTaskNo1(),
                    command.getRgvNo(),
                    new Date(),
                    command.getTaskStatus1().toString(),
                    command.getTargetPosition1(),
                    command.getEndStaNo1(),
                    null,
                    new Date(),
                    null
            );
            bean.insert(basRgvOpt);
        } catch (Exception ignore) {
            log.error(ignore.getMessage());
        }

        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("RGV 工位1命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 工位1命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
        } else {
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】写入RGV plc工位1数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入RGV plc工位1数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }

    /**
     * 工位2写入数据
     */
    private boolean write2(RgvCommand command) throws InterruptedException {
        if (null == command) {
            log.error("RGV写入命令为空");
            return false;
        }

        OperateResultExOne<byte[]> result1 = siemensNet.Read("DB100.0", (short) 34);
        if (result1.IsSuccess){
            RgvCommand one = new RgvCommand();
            one.setTargetPosition2(siemensNet.getByteTransform().TransInt32(result1.Content, 16));
            one.setEndStaNo2(siemensNet.getByteTransform().TransInt32(result1.Content, 20));
            one.setTaskStatus2(siemensNet.getByteTransform().TransInt16(result1.Content, 24));
            one.setTaskNo2(siemensNet.getByteTransform().TransInt32(result1.Content, 26));
            one.setDirection2(siemensNet.getByteTransform().TransInt16(result1.Content, 30));
            one.setWrkTaskMove2(siemensNet.getByteTransform().TransInt16(result1.Content, 38));
            News.error("RGV命令下发前读取状态[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
        }


        OperateResult result2 = siemensNet.Write("DB100.34", false);
        if (result2.IsSuccess){
            News.error("下发前把车子确认位置为0");
        }


        byte[] writeBytes = new byte[34];
        command.setRgvNo(slave.getId());

        writeInt32(writeBytes, 16, command.getTargetPosition1());
        writeInt32(writeBytes, 20, command.getEndStaNo2());
        writeInt16(writeBytes, 24, (short)command.getTaskStatus2());
        writeInt32(writeBytes, 26, command.getTaskNo2());
        writeInt16(writeBytes, 30, (short)command.getDirection2());
        writeBool(writeBytes, 32, 0, command.getAckFinish2());
        writeInt16(writeBytes, 38, (short)command.getWrkTaskMove2());


        OperateResult result = siemensNet.Write("DB100.0", writeBytes);



        if (!result.IsSuccess){
            News.error("写入RGVplc数据失败，重新添加任务到队列 ===> [id:{}],{}",slave.getId(),JSON.toJSON(command));
            MessageQueue.offer(SlaveType.Rgv,slave.getId(),new Task(5,command));
            Thread.sleep(100);
            readStatus();
            return false;
        }

        //RGV任务写入后，回读一次，看是否成功
        Thread.sleep(400);
        try {
            OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.0", (short) 34);
            if (resultRead.IsSuccess){
                RgvCommand one = new RgvCommand();
                one.setWrkTaskMove2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 38));
                one.setDirection2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 30));
                one.setTaskNo2(siemensNet.getByteTransform().TransInt32(resultRead.Content, 26));
                one.setTaskStatus2(siemensNet.getByteTransform().TransInt16(resultRead.Content, 24));
                one.setEndStaNo2(siemensNet.getByteTransform().TransInt32(resultRead.Content, 20));
                one.setTargetPosition2(siemensNet.getByteTransform().TransInt32(resultRead.Content, 16));
                if (
                        !command.getDirection2().equals(one.getDirection2()) ||
                                !command.getTaskNo2().equals(one.getTaskNo2()) ||
                                !command.getTaskStatus2().equals(one.getTaskStatus2()) ||
                                !command.getEndStaNo2().equals(one.getEndStaNo2()) ||
                                !command.getTargetPosition2().equals(one.getTargetPosition2()) ||
                                !command.getWrkTaskMove2().equals(one.getWrkTaskMove2())
                ) {
                    try{
                        News.error("RGV命令地址写入后回读失败[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
                    }catch (Exception e){
                        try{
                            News.error("日志打印失败：===>>参数one报错 [id:{}],{}", slave.getId(), JSON.toJSON(command),JSON.toJSON(resultRead));
                        }catch (Exception e1){
                            News.error("日志打印失败：===>> [id:{}],{}", slave.getId(), JSON.toJSON(command));
                        }
                    }
                    News.error("Rgv命令回读失败后，重新添加任务到队列 ===>> [id:{}],{}", slave.getId(), JSON.toJSON(command));
                    MessageQueue.offer(SlaveType.Rgv, slave.getId(), new Task(5, command));
                    Thread.sleep(100);
                    readStatus();
                    return false;
                }else {
                    News.info("RGV命令地址写入后回读成功[id:{}] >>>>> 写入[{}],===>>回读[{}]", slave.getId(), JSON.toJSON(command),JSON.toJSON(one));
                }
            }
        }catch (Exception e){
            News.error("RGV命令地址写入后回读出错");
        }

        if (command.getAckFinish1()) {
            if (result.IsSuccess) {
                Thread.sleep(300);
                //任务下发次数
                int writeCount2 = 0;

                do {
                    writeCount2++;
                    boolean commandFinish = false;
                    result = siemensNet.Write("DB100.32.1", commandFinish);
                    if(result.IsSuccess){
                        //RGV任务写入后，回读一次，看是否成功
                        Thread.sleep(200);
                        OperateResultExOne<byte[]> resultRead = siemensNet.Read("DB100.32", (short) 2);
                        if (resultRead.IsSuccess) {
                            commandFinish=siemensNet.getByteTransform().TransBool(resultRead.Content, 1);
                            if (commandFinish){
                                News.error("RGV任务确认位"+commandFinish+"写入数据与回读数据不一致！"+"循环执行次数:"+writeCount2+"次");
                            }else{
                                //任务命令写入成功
                                News.info("RGV任务确认位"+commandFinish+"回读成功！"+"循环执行次数:"+writeCount2+"次");
                                break;
                            }
                        }else {
                            News.error("RGV任务确认位"+commandFinish+"回读失败！"+"循环执行次数:"+writeCount2+"次");
                        }
                    } else {
                        News.error("RGV任务确认位"+commandFinish+"写入失败！"+"循环执行次数:"+writeCount2+"次");
                    }
                }while (writeCount2<5);
            }
        }

        try {
            // 日志记录
            BasRgvOptService bean = SpringUtils.getBean(BasRgvOptService.class);
            BasRgvOpt basRgvOpt = new BasRgvOpt(
                    command.getTaskNo2(),
                    command.getRgvNo(),
                    new Date(),
                    command.getTaskStatus2().toString(),
                    command.getTargetPosition2(),
                    command.getEndStaNo2(),
                    null,
                    new Date(),
                    null
            );
            bean.insert(basRgvOpt);
        } catch (Exception ignore) {}

        if (result != null && result.IsSuccess) {
            Thread.sleep(200);
            this.readStatus();
            log.info("RGV 工位2命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 工位2命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
        } else {
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】写入RGV plc工位2数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入RGV plc工位2数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            OutputQueue.RGV.offer(MessageFormat.format("【{0}】写入RGV plc工位数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort()));
            log.error("写入RGV plc工位数据失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            return false;
        }
    }