#

tqs

2023-03-16 60e04974768c2c98b839a085cce2579caf0f3864

 src/main/java/com/zy/core/thread/MelsecCrnThread.java

@@ -39,7 +39,13 @@
    private MelsecMcNet melsecMcNet;
    private CrnSlave slave;
    private CrnProtocol crnProtocol;
    private short heartBeatVal = 1;
    private boolean resetFlag = false;

    /**
     * 堆垛机是否在回原点运动中标记
     */
    private boolean backHpFlag = false;

    public MelsecCrnThread(CrnSlave slave) {
        this.slave = slave;
@@ -49,6 +55,11 @@
    @SuppressWarnings("InfiniteLoopStatement")
    public void run() {
        this.connect();
//        try {
//            Thread.sleep(2000);
//        } catch (InterruptedException e) {
//            e.printStackTrace();
//        }
        while (true) {
            try {
                int step = 1;
@@ -86,6 +97,8 @@
                    default:
                        break;
                }
                // 心跳
                heartbeat();
                Thread.sleep(500);
            } catch (Exception e) {
                e.printStackTrace();
@@ -111,13 +124,13 @@
        crnProtocol.setWalkPos((short)0);
        crnProtocol.setLoaded((short)0);
        crnProtocol.setAlarm((short)0);
        crnProtocol.setXSpeed(0F);
        crnProtocol.setYSpeed(0F);
        crnProtocol.setZSpeed(0F);
        crnProtocol.setXDistance(0F);
        crnProtocol.setYDistance(0F);
        crnProtocol.setXDuration(0F);
        crnProtocol.setYDuration(0F);
        crnProtocol.setxSpeed((short)0);
        crnProtocol.setySpeed((short)0);
        crnProtocol.setzSpeed((short)0);
        crnProtocol.setxDistance((short)0);
        crnProtocol.setyDistance((short)0);
        crnProtocol.setxDuration((short)0);
        crnProtocol.setyDuration((short)0);
    }

    @Override
@@ -134,7 +147,7 @@
            log.error("堆垛机plc连接失败！！！ ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
            initCrn();
        }
        melsecMcNet.ConnectClose();
//        melsecMcNet.ConnectClose();
        return result;
    }

@@ -143,10 +156,16 @@
     */
    private void readStatus(){
        try {
//            if (this.slave.getId() == 1 && flag1.equals(0)) {
//                Thread.sleep(3000);
//                flag1=1;
//                System.out.println("===");
//            }
            OperateResultExOne<byte[]> result = melsecMcNet.Read("D20", (short) 70);
            if (result.IsSuccess) {
                if (null == crnProtocol) {
                    crnProtocol = new CrnProtocol();
                    crnProtocol.setCrnNo(slave.getId());
                }
                crnProtocol.setMode(melsecMcNet.getByteTransform().TransInt16(result.Content, 0));
                crnProtocol.setTaskNo(melsecMcNet.getByteTransform().TransInt16(result.Content, 2));
@@ -162,13 +181,13 @@
                crnProtocol.setTemp2(melsecMcNet.getByteTransform().TransInt16(result.Content, 22));
                crnProtocol.setTemp3(melsecMcNet.getByteTransform().TransInt16(result.Content, 24));
                crnProtocol.setTemp4(melsecMcNet.getByteTransform().TransInt16(result.Content, 26));
                crnProtocol.setXSpeed(melsecMcNet.getByteTransform().TransSingle(result.Content, 28));
                crnProtocol.setYSpeed(melsecMcNet.getByteTransform().TransSingle(result.Content, 32));
                crnProtocol.setZSpeed(melsecMcNet.getByteTransform().TransSingle(result.Content, 36));
                crnProtocol.setXDistance(melsecMcNet.getByteTransform().TransSingle(result.Content, 40));
                crnProtocol.setYDistance(melsecMcNet.getByteTransform().TransSingle(result.Content, 44));
                crnProtocol.setXDuration(melsecMcNet.getByteTransform().TransSingle(result.Content, 48));
                crnProtocol.setYDuration(melsecMcNet.getByteTransform().TransSingle(result.Content, 52));
                crnProtocol.setxSpeed(melsecMcNet.getByteTransform().TransInt16(result.Content, 28));
                crnProtocol.setySpeed(melsecMcNet.getByteTransform().TransInt16(result.Content, 32));
                crnProtocol.setzSpeed(melsecMcNet.getByteTransform().TransInt16(result.Content, 36));
                crnProtocol.setxDistance(melsecMcNet.getByteTransform().TransInt16(result.Content, 40));
                crnProtocol.setyDistance(melsecMcNet.getByteTransform().TransInt16(result.Content, 44));
                crnProtocol.setxDuration(melsecMcNet.getByteTransform().TransInt16(result.Content, 48));
                crnProtocol.setyDuration(melsecMcNet.getByteTransform().TransInt16(result.Content, 52));

                OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] <<<<< 实时数据更新成功",DateUtils.convert(new Date()), slave.getId()));

@@ -176,6 +195,9 @@
                if (crnProtocol.getStatusType().equals(CrnStatusType.WAITING)) {
                    log.error("-------------------------------------------第一步、[堆垛机号：{}][工作号：{}]==>> 状态为90，等待确认！！",slave.getId(),crnProtocol.getTaskNo());
                    if (resetFlag) {
                        if(crnProtocol.getTaskNo()==9999){
                            backHpFlag = false;
                        }
                        CrnCommand crnCommand = new CrnCommand();
                        crnCommand.setAckFinish((short)1);
                        if (write(crnCommand)) {
@@ -189,11 +211,13 @@
                BasCrnp basCrnp = new BasCrnp();
                basCrnp.setCrnErr(crnProtocol.getAlarm()==null?0:crnProtocol.getAlarm().longValue());
                basCrnp.setCrnNo(slave.getId());
                basCrnp.setCrnSts((int)crnProtocol.getMode());
                if (!basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                    log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
                }

            } else {
                initCrn();
                OutputQueue.CRN.offer(MessageFormat.format("【{0}】{1}堆垛机plc状态信息失败",DateUtils.convert(new Date()), slave.getId()));
                throw new CoolException(MessageFormat.format( "堆垛机plc状态信息失败 ===>> [id:{0}] [ip:{1}] [port:{2}]", slave.getId(), slave.getIp(), slave.getPort()));
            }
@@ -214,6 +238,55 @@
            log.error("堆垛机写入命令为空");
            return false;
        }

//        OperateResult result = null;
//        try{
//            Integer exeCount=0;
//            do{
//                command.setCrnNo(slave.getId());
//                short[] array = new short[10];
//                array[0] = command.getAckFinish();
//                array[1] = command.getTaskNo();
//                array[2] = command.getTaskMode();
//                array[3] = command.getSourcePosX();
//                array[4] = command.getSourcePosY();
//                array[5] = command.getSourcePosZ();
//                array[6] = command.getDestinationPosX();
//                array[7] = command.getDestinationPosY();
//                array[8] = command.getDestinationPosZ();
//                array[9] = command.getCommand();
//                result = melsecMcNet.Write("D0", array);
//                if(result.IsSuccess) {
//                    if (command.getAckFinish() == 0) {
//                        short commandFinish = 1;
//                        result = melsecMcNet.Write("D9", commandFinish);
//                        if(result.IsSuccess){
//                            //写任务确认返回成功后，查询确认一次
//                            Thread.sleep(200);
//                            OperateResultExOne<byte[]> result1 = melsecMcNet.Read("D9", (short)2);
//                            if(result1.IsSuccess){
//                                short commandVal = melsecMcNet.getByteTransform().TransInt16(result1.Content,2);
//                                if(commandVal==1){
//                                    break;
//                                } else {
//                                    exeCount++;
//                                }
//                            } else{
//                                exeCount++;
//                            }
//                        }else{
//                            exeCount++;
//                        }
//                    }
//                }else{
//                    exeCount++;
//                }
//                Thread.sleep(200);
//            }while(exeCount>3);
//        }catch (Exception e){
//
//        }

        command.setCrnNo(slave.getId());
        short[] array = new short[10];
        array[0] = command.getAckFinish();
@@ -256,7 +329,7 @@
            bean.insert(basCrnOpt);
        } catch (Exception ignore) {}

        if (result.IsSuccess) {
        if (result != null && result.IsSuccess) {
            log.info("堆垛机命令下发[id:{}] >>>>> {}", slave.getId(), JSON.toJSON(command));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            return true;
@@ -272,6 +345,21 @@
        melsecMcNet.ConnectClose();
    }

    /**
     * 心跳
     */
    private void heartbeat(){
        if (heartBeatVal == 1) {
            heartBeatVal = 2;
        } else {
            heartBeatVal = 1;
        }
        OperateResult write = melsecMcNet.Write("D10", heartBeatVal);
        if (!write.IsSuccess) {
            log.error("堆垛机plc心跳通讯失败 ===>> [id:{}] [ip:{}] [port:{}]", slave.getId(), slave.getIp(), slave.getPort());
        }
    }


    /******************************************************************************************/
    /**************************************** 测试专用 *****************************************/