#

TQS

2022-11-19 5b23a55528e6bae48c56ac0d216da6196a5ca729

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -792,6 +792,7 @@
                        crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                        crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                        crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                        crnCommand.setCommand((short) 0);
                        crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                        crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
                        crnCommand.setSourcePosY(crnStn.getBay().shortValue());     // 源库位列
@@ -846,6 +847,7 @@
                            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                            crnCommand.setCommand((short) 0);
                            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                            crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
                            crnCommand.setSourcePosY(crnStn.getBay().shortValue());     // 源库位列
@@ -908,14 +910,14 @@
            if(!Cools.isEmpty(one)){
                //存在移库任务，且在移出中，且移库源库位与待出库库位不在同一库位组，时跳出，确保移库/出库全套任务完成后，再执行下一笔
                if(one.getWrkSts() > 10 && (Utils.getGroupRow(wrkMast.getSourceLocNo()) != Utils.getGroupRow(one.getSourceLocNo())
                        && Utils.getBay(wrkMast.getSourceLocNo()) == Utils.getBay(one.getSourceLocNo())
                        && Utils.getLev(wrkMast.getSourceLocNo()) == Utils.getLev(one.getSourceLocNo()))){
                        || Utils.getBay(wrkMast.getSourceLocNo()) != Utils.getBay(one.getSourceLocNo())
                        || Utils.getLev(wrkMast.getSourceLocNo()) != Utils.getLev(one.getSourceLocNo()))){
                    continue;
                }
                //存在移库任务，且在移回中，且移库目标库位与待出库库位不在同一库位组，时跳出，确保移库/出库全套任务完成后，再执行下一笔
                if(one.getWrkSts() < 11  && (Utils.getGroupRow(wrkMast.getSourceLocNo()) != Utils.getGroupRow(one.getLocNo())
                        && Utils.getBay(wrkMast.getSourceLocNo()) == Utils.getBay(one.getLocNo())
                        && Utils.getLev(wrkMast.getSourceLocNo()) == Utils.getLev(one.getLocNo()))){
                        || Utils.getBay(wrkMast.getSourceLocNo()) != Utils.getBay(one.getLocNo())
                        || Utils.getLev(wrkMast.getSourceLocNo()) != Utils.getLev(one.getLocNo()))){
                    continue;
                }
            }
@@ -1032,6 +1034,7 @@
                    crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                    crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                    crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                    crnCommand.setCommand((short) 0);
                    crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                    crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
                    crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
@@ -1102,6 +1105,7 @@
                            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                            crnCommand.setCommand((short) 0);
                            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                            crnCommand.setSourcePosX(Utils.getGroupRow(sourceSta.getRow1()).shortValue());     // 源库位排
                            crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
@@ -1219,6 +1223,7 @@
                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                crnCommand.setCommand((short) 0);
                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                crnCommand.setSourcePosX(sourceLoc.getRow1().shortValue());     // 源库位排
                crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -1290,6 +1295,7 @@
                    crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                    crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                    crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                    crnCommand.setCommand((short) 0);
                    crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                    crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                    crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -1354,7 +1360,8 @@
                for(String deepLocNo : deeplocs) {
                    LocMast deepLoc = locMastService.selectById(deepLocNo);
//                WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(deepLocNo);
                    if(deepLoc != null && !deepLoc.getLocSts().equals("F") && deepLoc.getLocSts().equals("D") && deepLoc.getLocSts().equals("O")){
                    if(deepLoc != null && !deepLoc.getLocSts().equals("F") && !deepLoc.getLocSts().equals("D") && !deepLoc.getLocSts().equals("O")){
                        log.error("移库再回库时，深库位组深库位状态为作业中 ===>> deepLoc={},loc_sts={}", deepLoc.getLocNo(), deepLoc.getLocSts());
                        flag = true;
                        break;
                    }
@@ -1367,7 +1374,7 @@
                        wrkMast.setSteNo(null);
                        wrkMast.setModiTime(new Date());
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                            log.error("修改工作档状态 17.移库完成 => 2.移库再入库中 失败！！，工作号={}", wrkMast.getWrkNo());
                        }

                        if(deepLoc.getLocSts().equals("O")){
@@ -1465,6 +1472,7 @@
                            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                            crnCommand.setCommand((short) 0);
                            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                            crnCommand.setSourcePosX(sourceLoc.getRow1().shortValue());     // 源库位排
                            crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -1570,6 +1578,7 @@
                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                crnCommand.setCommand((short) 0);
                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                crnCommand.setSourcePosX(sourceLoc.getRow1().shortValue());     // 源库位排
                crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -1620,6 +1629,7 @@
                            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                            crnCommand.setCommand((short) 0);
                            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                            crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                            crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -1714,6 +1724,7 @@
                        crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                        crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                        crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                        crnCommand.setCommand((short) 0);
                        crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                        crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                        crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -1760,6 +1771,7 @@
                                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                                crnCommand.setCommand((short) 0);
                                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                                crnCommand.setSourcePosX(Utils.getGroupRow(sourceLoc.getRow1()).shortValue());     // 源库位排
                                crnCommand.setSourcePosY(sourceLoc.getBay1().shortValue());     // 源库位列
@@ -2013,6 +2025,7 @@
                    crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
                    crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                    crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                    crnCommand.setCommand((short) 0);
                    crnCommand.setTaskMode(CrnTaskModeType.STE_MOVE); // 任务模式:  库位移转
                    crnCommand.setSourcePosX(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());     // 源库位排
                    crnCommand.setSourcePosY(steProtocol.getBay());     // 源库位列
@@ -2042,6 +2055,7 @@
                    crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
                    crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                    crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                    crnCommand.setCommand((short) 0);
                    crnCommand.setTaskMode(CrnTaskModeType.STE_MOVE); // 任务模式:  库位移转
                    crnCommand.setSourcePosX(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());     // 源库位排
                    crnCommand.setSourcePosY(steProtocol.getBay());     // 源库位列
@@ -2094,6 +2108,7 @@
                crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                crnCommand.setCommand((short) 0);
                crnCommand.setTaskMode(CrnTaskModeType.STE_MOVE); // 任务模式:  库位移转
                crnCommand.setSourcePosX(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());     // 源库位排
                crnCommand.setSourcePosY(steProtocol.getBay());     // 源库位列
@@ -2571,8 +2586,12 @@
            SteThread steThread = (SteThread) SlaveConnection.get(SlaveType.Ste, ste.getId());
            SteProtocol steProtocol = steThread.getSteProtocol();
            if (steProtocol == null) { continue; }
            if (steProtocol.getWaiting() && steProtocol.getTaskNo() != 0) {
                log.info("ste[id={}] 执行工作档完成，任务号={}", steProtocol.getSteNo(), steProtocol.getTaskNo());
            if (steProtocol.getWaiting() && steProtocol.getTaskNo() == 0){
                log.info("ste[id={}] 收到等待WCS确认信号，但是任务号(地址V824)为0", steProtocol.getSteNo());
            }

            if (steProtocol.getWaiting() && steProtocol.getTaskNo() != 0 && steProtocol.getStatus() == 10) {
                log.info("ste[id={}] 执行工作档完成，任务号={}, 穿梭车状态={}", steProtocol.getSteNo(), steProtocol.getTaskNo(), steProtocol.getStatus());
                if (steProtocol.getTaskNo() == 9999) {
                    steThread.setResetFlag(true);
                } else {
@@ -3078,10 +3097,13 @@
                    List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
                    wrkDetls.forEach(wrkDetl -> {
                        if (wrkMast.getIoType() == 101) {
                            ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getBatch(), wrkDetl.getAnfme()));
                            ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getBatch(), wrkDetl.getSpecs(), wrkDetl.getAnfme()));
                        }
                        if (wrkMast.getIoType() == 103 && (null == wrkDetl.getInspect() || 0 == wrkDetl.getInspect())) {
                            ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getBatch(), wrkDetl.getAnfme()));
                            ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getBatch(), wrkDetl.getSpecs(), wrkDetl.getAnfme()));
                        }
                        if (wrkMast.getIoType() == 107) {
                            ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getBatch(), wrkDetl.getSpecs(), wrkDetl.getAnfme()));
                        }
                    });
                }
@@ -3222,6 +3244,7 @@
                        crnCommand.setCrnNo(wrkCharge.getCrnNo()); // 堆垛机编号
                        crnCommand.setTaskNo(wrkCharge.getWrkNo().shortValue()); // 工作号
                        crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                        crnCommand.setCommand((short) 0);
                        crnCommand.setTaskMode(CrnTaskModeType.STE_MOVE); // 任务模式:  库位移转
                        crnCommand.setSourcePosX(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());     // 源库位排
                        crnCommand.setSourcePosY(steProtocol.getBay());     // 源库位列
@@ -3430,6 +3453,7 @@
                crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
                crnCommand.setTaskNo(wrkCharge.getWrkNo().shortValue()); // 工作号
                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                crnCommand.setCommand((short) 0);
                crnCommand.setTaskMode(CrnTaskModeType.STE_MOVE); // 任务模式:  库位移转
                crnCommand.setSourcePosX(Utils.getGroupRow(steProtocol.getRow().intValue()).shortValue());     // 源库位排
                crnCommand.setSourcePosY(steProtocol.getBay());     // 源库位列