#

zjj

2023-12-14 45a87642e46c746802af13bf47bcd70e3b69277a

 src/main/java/com/zy/asrs/controller/CrnController.java

@@ -376,51 +376,65 @@
    @ManagerAuth(memo = "入库")
    @PostMapping("/crn/operator/put")
    public R crnPut(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
        command.setAckFinish((short) 0);  // 任务完成确认位
        command.setTaskMode(CrnTaskModeType.PAKIN); // 任务模式
        command.setSourcePosX(param.getSourceRow());     // 源库位排
        command.setSourcePosY(param.getSourceBay());     // 源库位列
        command.setSourcePosZ(param.getSourceLev());     // 源库位层
        command.setDestinationPosX(param.getRow());     // 目标库位排
        command.setDestinationPosY(param.getBay());     // 目标库位列
        command.setDestinationPosZ(param.getLev());     // 目标库位层
        command.setSourcePosZ(param.getSourceRow());     // 源库位排
        command.setSourcePosX(param.getSourceBay());     // 源库位列
        command.setSourcePosY(param.getSourceLev());     // 源库位层
        command.setDestinationPosZ(param.getRow());     // 目标库位排
        command.setDestinationPosX(param.getBay());     // 目标库位列
        command.setDestinationPosY(param.getLev());     // 目标库位层
        command.setCommand((short)1);
        return crnControl(command)?R.ok():R.error();
    }

    @ManagerAuth(memo = "出库")
    @PostMapping("/crn/operator/take")
    public R crnTake(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
        command.setAckFinish((short) 0);  // 任务完成确认位
        command.setTaskMode(CrnTaskModeType.PAKOUT); // 任务模式
        command.setSourcePosX(param.getSourceRow());     // 源库位排
        command.setSourcePosY(param.getSourceBay());     // 源库位列
        command.setSourcePosZ(param.getSourceLev());     // 源库位层
        command.setDestinationPosX(param.getRow());     // 目标库位排
        command.setDestinationPosY(param.getBay());     // 目标库位列
        command.setDestinationPosZ(param.getLev());     // 目标库位层
        command.setSourcePosZ(param.getSourceRow());     // 源库位排
        command.setSourcePosX(param.getSourceBay());     // 源库位列
        command.setSourcePosY(param.getSourceLev());     // 源库位层
        command.setDestinationPosZ(param.getRow());     // 目标库位排
        command.setDestinationPosX(param.getBay());     // 目标库位列
        command.setDestinationPosY(param.getLev());     // 目标库位层
        return crnControl(command)?R.ok():R.error();
    }

    @ManagerAuth(memo = "库位转移")
    @PostMapping("/crn/operator/stockMove")
    public R crnStockMove(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
        command.setAckFinish((short) 0);  // 任务完成确认位
        command.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式
        command.setSourcePosX(param.getSourceRow());     // 源库位排
        command.setSourcePosY(param.getSourceBay());     // 源库位列
        command.setSourcePosZ(param.getSourceLev());     // 源库位层
        command.setDestinationPosX(param.getRow());     // 目标库位排
        command.setDestinationPosY(param.getBay());     // 目标库位列
        command.setDestinationPosZ(param.getLev());     // 目标库位层
        command.setSourcePosZ(param.getSourceRow());     // 源库位排
        command.setSourcePosX(param.getSourceBay());     // 源库位列
        command.setSourcePosY(param.getSourceLev());     // 源库位层
        command.setDestinationPosZ(param.getRow());     // 目标库位排
        command.setDestinationPosX(param.getBay());     // 目标库位列
        command.setDestinationPosY(param.getLev());     // 目标库位层
        command.setCommand((short)1);
        LocMast sourceLoc = locMastService.selectOne(new EntityWrapper<LocMast>().eq("row1", command.getSourcePosX())
                .eq("bay1", command.getSourcePosY()).eq("lev1", command.getSourcePosZ()));
        LocMast loc = locMastService.selectOne(new EntityWrapper<LocMast>().eq("row1", command.getDestinationPosX())
@@ -432,6 +446,10 @@
    @ManagerAuth(memo = "站到站")
    @PostMapping("/crn/operator/siteMove")
    public R crnSiteMove(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
@@ -449,6 +467,10 @@
    @ManagerAuth(memo = "回原点")
    @PostMapping("/crn/operator/bacOrigin")
    public R crnBacOrigin(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
@@ -466,6 +488,10 @@
    @ManagerAuth(memo = "反原点")
    @PostMapping("/crn/operator/reverseOrigin")
    public R reverseOrigin(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
@@ -475,8 +501,8 @@
        command.setSourcePosY((short) 0);     // 源库位列
        command.setSourcePosZ((short) 0);     // 源库位层
        command.setDestinationPosX((short) 0);     // 目标库位排
        command.setDestinationPosY((short) 34);     // 目标库位列
        command.setDestinationPosZ((short) 5);     // 目标库位层
        command.setDestinationPosY((short) 22);     // 目标库位列
        command.setDestinationPosZ((short) 1);     // 目标库位层
        return crnControl(command)?R.ok():R.error();
    }

@@ -501,6 +527,10 @@
    @ManagerAuth(memo = "任务完成")
    @PostMapping("/crn/operator/taskComplete")
    public R crnTaskComplete(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
@@ -530,6 +560,10 @@
    @ManagerAuth(memo = "清除命令")
    @PostMapping("/crn/operator/clearCommand")
    public R crnClearCommand(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        if (param.getCrnNo() == null) {
            throw new CoolException("请选择堆垛机");
        }
@@ -550,6 +584,10 @@
    @ManagerAuth(memo = "手动复位")
    @PostMapping("/crn/operator/handleReset")
    public R handleReset(CrnOperatorParam param) throws Exception {
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        if (param.getCrnNo() == null) {
            throw new CoolException("请选择堆垛机");
        }
@@ -588,6 +626,10 @@
    @ManagerAuth(memo = "切换联机模式")
    @PostMapping("/crn/operator/auto")
    public R crnAuto(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
@@ -599,6 +641,10 @@
    @ManagerAuth(memo = "切换半手动模式")
    @PostMapping("/crn/operator/semiAutomatic")
    public R crnsemiAutomatic(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
@@ -610,6 +656,10 @@
    @ManagerAuth(memo = "切换手动模式")
    @PostMapping("/crn/operator/hand")
    public R onlineWrk1(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
@@ -621,6 +671,10 @@
    @ManagerAuth(memo = "申请完成任务")
    @PostMapping("/crn/operator/onlineWrk1")
    public R onlineWrk2(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
@@ -632,6 +686,10 @@
    @ManagerAuth(memo = "申请取消任务")
    @PostMapping("/crn/operator/onlineWrk2")
    public R onlineWrk3(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
@@ -643,6 +701,10 @@
    @ManagerAuth(memo = "清除联机任务")
    @PostMapping("/crn/operator/onlineWrk3")
    public R onlineWrk4(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号
@@ -654,6 +716,10 @@
    @ManagerAuth(memo = "恢复联机任务")
    @PostMapping("/crn/operator/onlineWrk4")
    public R crnHand(CrnOperatorParam param){
        // 系统运行状态判断
        if (SystemProperties.WCS_RUNNING_STATUS.get()) {
            return R.error("wcs系统状态为开启");
        }
        short[] array = new short[9];
        CrnCommand command = new CrnCommand();
        command.setCrnNo(param.getCrnNo()); // 堆垛机编号