#

luxiaotao1123

2020-08-21 44d6711c1afb71dccd78a39948dffe432c8989de

 src/main/java/com/zy/core/thread/CrnThread.java

@@ -6,9 +6,13 @@
import HslCommunication.Profinet.Siemens.SiemensS7Net;
import com.alibaba.fastjson.JSON;
import com.core.common.DateUtils;
import com.core.common.SpringUtils;
import com.zy.asrs.entity.BasCrnp;
import com.zy.asrs.service.BasCrnpService;
import com.zy.core.ThreadHandler;
import com.zy.core.cache.MessageQueue;
import com.zy.core.cache.OutputQueue;
import com.zy.core.enums.CrnStatusType;
import com.zy.core.enums.CrnTaskModeType;
import com.zy.core.enums.SlaveType;
import com.zy.core.model.CrnSlave;
@@ -32,7 +36,6 @@
    private SiemensS7Net siemensNet;
    private CrnSlave slave;
    private CrnProtocol crnProtocol;


    public CrnThread(CrnSlave slave) {
        this.slave = slave;
@@ -130,14 +133,36 @@
            // 异常信息
            crnProtocol.setError1(siemensNet.getByteTransform().TransBool(result.Content, 22, 2));
            crnProtocol.setError2(siemensNet.getByteTransform().TransBool(result.Content, 24, 2));
            crnProtocol.setTemp1(siemensNet.getByteTransform().TransInt16(result.Content, 26));
            crnProtocol.setXSpeed(siemensNet.getByteTransform().TransSingle(result.Content, 28));
            crnProtocol.setYSpeed(siemensNet.getByteTransform().TransSingle(result.Content, 32));
            crnProtocol.setZSpeed(siemensNet.getByteTransform().TransSingle(result.Content, 36));
            crnProtocol.setXDistance(siemensNet.getByteTransform().TransSingle(result.Content, 40));
            crnProtocol.setYDistance(siemensNet.getByteTransform().TransSingle(result.Content, 44));
            crnProtocol.setXDuration(siemensNet.getByteTransform().TransSingle(result.Content, 48));
            crnProtocol.setYDuration(siemensNet.getByteTransform().TransSingle(result.Content, 52));
            crnProtocol.setError3(siemensNet.getByteTransform().TransBool(result.Content, 26, 2));
            crnProtocol.setError4(siemensNet.getByteTransform().TransBool(result.Content, 28, 2));
            crnProtocol.setError5(siemensNet.getByteTransform().TransBool(result.Content, 30, 2));
            crnProtocol.setError6(siemensNet.getByteTransform().TransBool(result.Content, 32, 2));
            crnProtocol.setXSpeed(siemensNet.getByteTransform().TransSingle(result.Content, 34));
            crnProtocol.setYSpeed(siemensNet.getByteTransform().TransSingle(result.Content, 38));
            crnProtocol.setZSpeed(siemensNet.getByteTransform().TransSingle(result.Content, 42));
            crnProtocol.setXDistance(siemensNet.getByteTransform().TransSingle(result.Content, 46));
            crnProtocol.setYDistance(siemensNet.getByteTransform().TransSingle(result.Content, 50));
            crnProtocol.setXDuration(siemensNet.getByteTransform().TransSingle(result.Content, 54));
            crnProtocol.setYDuration(siemensNet.getByteTransform().TransSingle(result.Content, 58));

            /**
             *   当读到status == 90.任务完成等待WCS确认 时
             *   下发任务完成指令
             */
            if (crnProtocol.getStatusType().equals(CrnStatusType.WAITING)) {
                CrnCommand crnCommand = new CrnCommand();
                crnCommand.setAckFinish((short)1);
                write(crnCommand);
            }

            // 根据实时信息更新数据库
            BasCrnpService basCrnpService = SpringUtils.getBean(BasCrnpService.class);
            BasCrnp basCrnp = new BasCrnp();
            basCrnp.setCrnNo(slave.getId());
            if (basCrnpService.updateById(crnProtocol.toSqlModel(basCrnp))){
                log.error("堆垛机plc数据库更新失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
            }

        } else {
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】读取堆垛机plc状态信息失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            log.error("读取堆垛机plc状态信息失败 ===>> [id:{}] [ip:{}] [port:{}] [rack:{}] [slot:{}]", slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot());
@@ -166,8 +191,8 @@
        OperateResult result = siemensNet.Write("DB8.0", array);
        if (result.IsSuccess) {
            System.out.println(MessageFormat.format("【{0}】[id:{1}] >>>>> {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
            readStatus();
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】[id:{1}] >>>>> 命令下发： {2}", DateUtils.convert(new Date()), slave.getId(), JSON.toJSON(command)));
//            readStatus();
        } else {
            System.out.println(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
            OutputQueue.CRN.offer(MessageFormat.format("【{0}】写入堆垛机plc数据失败 ===>> [id:{1}] [ip:{2}] [port:{3}] [rack:{4}] [slot:{5}]", DateUtils.convert(new Date()), slave.getId(), slave.getIp(), slave.getPort(), slave.getRack(), slave.getSlot()));
@@ -191,7 +216,7 @@
    /******************************************************************************************/
    /**************************************** 测试专用 *****************************************/
    /*****************************************************************************************/
    public static void main(String[] args) {
    public static void main(String[] args) throws InterruptedException {
        CrnSlave slave = new CrnSlave();
        slave.setId(1);
        slave.setIp("192.168.6.9");
@@ -201,22 +226,80 @@
        crnThread.connect();
        crnThread.readStatus();
        System.out.println(JSON.toJSONString(crnThread.crnProtocol));
        Thread.sleep(3000L);

        // 1.入库 源和目标都发
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.PAKIN); // 任务模式
//        command.setSourcePosX((short) 1);     // 源库位排
//        command.setSourcePosY((short) 0);     // 源库位列
//        command.setSourcePosZ((short) 1);     // 源库位层
//        command.setDestinationPosX((short) 2);     // 目标库位排
//        command.setDestinationPosY((short) 3);     // 目标库位列
//        command.setDestinationPosZ((short) 1);     // 目标库位层
//        crnThread.write(command);

        // 2.出库 源和目标都发
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.PAKOUT); // 任务模式
//        command.setSourcePosX((short) 2);     // 源库位排
//        command.setSourcePosY((short) 4);     // 源库位列
//        command.setSourcePosZ((short) 3);     // 源库位层
//        command.setDestinationPosX((short) 1);     // 目标库位排
//        command.setDestinationPosY((short) 0);     // 目标库位列
//        command.setDestinationPosZ((short) 1);     // 目标库位层
//        crnThread.write(command);


        CrnCommand command = new CrnCommand();
        command.setCrnNo(1); // 堆垛机编号
        command.setTaskNo((short) 0); // 工作号
        command.setAckFinish((short) 0);  // 任务完成确认位
        command.setTaskMode(CrnTaskModeType.OFFSET_MOVE); // 任务模式
        command.setSourcePosX((short) 0);     // 源库位排
        command.setSourcePosY((short) 0);     // 源库位列
        command.setSourcePosZ((short) 0);     // 源库位层
        command.setDestinationPosX((short) 1);     // 目标库位排
        command.setDestinationPosY((short) 5);     // 目标库位列
        command.setDestinationPosZ((short) 3);     // 目标库位层
        crnThread.write(command);
//        // 3.库位移转   源和目标都发 pass
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(slave.getId()); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
//        command.setSourcePosX((short)2);     // 源库位排
//        command.setSourcePosY((short)2);     // 源库位列
//        command.setSourcePosZ((short)3);     // 源库位层
//        command.setDestinationPosX((short)2);     // 目标库位排
//        command.setDestinationPosY((short)4);     // 目标库位列
//        command.setDestinationPosZ((short)4);     // 目标库位层
//        crnThread.write(command);

        // 4.站位移转   源和目标都发
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(slave.getId()); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.SITE_MOVE); // 任务模式:  库位移转
//        command.setSourcePosX((short)1);     // 源库位排
//        command.setSourcePosY((short)0);     // 源库位列
//        command.setSourcePosZ((short)1);     // 源库位层
//        command.setDestinationPosX((short)2);     // 目标库位排
//        command.setDestinationPosY((short)0);     // 目标库位列
//        command.setDestinationPosZ((short)1);     // 目标库位层
//        crnThread.write(command);

//        // 5.回原点  不用发   pass
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 0);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式
//        command.setSourcePosX((short) 0);     // 源库位排
//        command.setSourcePosY((short) 0);     // 源库位列
//        command.setSourcePosZ((short) 0);     // 源库位层
//        command.setDestinationPosX((short) 0);     // 目标库位排
//        command.setDestinationPosY((short) 0);     // 目标库位列
//        command.setDestinationPosZ((short) 0);     // 目标库位层
//        crnThread.write(command);

//        // 7.坐标移行   目标发   pass
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(1); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
@@ -225,25 +308,23 @@
//        command.setSourcePosX((short) 0);     // 源库位排
//        command.setSourcePosY((short) 0);     // 源库位列
//        command.setSourcePosZ((short) 0);     // 源库位层
//        command.setDestinationPosX((short) 0);     // 目标库位排
//        command.setDestinationPosY((short) 5);     // 目标库位列
//        command.setDestinationPosX((short) 2);     // 目标库位排
//        command.setDestinationPosY((short) 1);     // 目标库位列
//        command.setDestinationPosZ((short) 1);     // 目标库位层
//        crnThread.write(command);


//        // 写
//        CrnCommand command = new CrnCommand();
//        command.setCrnNo(slave.getId()); // 堆垛机编号
//        command.setTaskNo((short) 0); // 工作号
//        command.setAckFinish((short) 1);  // 任务完成确认位
//        command.setTaskMode(CrnTaskModeType.NONE); // 任务模式:  库位移转
//        command.setSourcePosX((short)0);     // 源库位排
//        command.setSourcePosY((short)0);     // 源库位列
//        command.setSourcePosZ((short)0);     // 源库位层
//        command.setDestinationPosX((short)0);     // 目标库位排
//        command.setDestinationPosY((short)0);     // 目标库位列
//        command.setDestinationPosZ((short)0);     // 目标库位层
//        crnThread.write(command);
        // 只有出现指定异常才进行复位
//        if (crnThread.crnProtocol.getCrnError2().leftTakeNoneErr
//                || crnThread.crnProtocol.getCrnError2().rightTakeNoneErr
//                || crnThread.crnProtocol.getCrnError2().leftPutLoadErr
//                || crnThread.crnProtocol.getCrnError2().rightPutLoadErr) {
//            CrnCommand command = new CrnCommand();
//            command.setCrnNo(1); // 堆垛机编号
//            command.setAckFinish((short) 1);  // 任务完成确认位
//            command.setTaskMode(CrnTaskModeType.NONE); // 任务模式
//            Thread.sleep(3000L);
//            crnThread.write(command);
//        }

    }