#

ytfl

2025-06-11 42180f49192aaddb9aa5db3469e4ce2c52d540a1

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -27,17 +27,17 @@
import com.zy.core.cache.MessageQueue;
import com.zy.core.cache.SlaveConnection;
import com.zy.core.enums.*;
import com.zy.core.model.CrnSlave;
import com.zy.core.model.DevpSlave;
import com.zy.core.model.LedSlave;
import com.zy.core.model.Task;
import com.zy.core.model.*;
import com.zy.core.model.command.CrnCommand;
import com.zy.core.model.command.LedCommand;
import com.zy.core.model.command.RgvCommand;
import com.zy.core.model.protocol.CrnProtocol;
import com.zy.core.model.protocol.RgvProtocol;
import com.zy.core.model.protocol.StaProtocol;
import com.zy.core.properties.SlaveProperties;
import com.zy.core.thread.BarcodeThread;
import com.zy.core.thread.LedThread;
import com.zy.core.thread.RgvThread;
import com.zy.core.thread.SiemensDevpThread;
import lombok.extern.slf4j.Slf4j;
import org.springframework.beans.factory.annotation.Autowired;
@@ -87,6 +87,10 @@
    private BasErrLogService basErrLogService;
    @Autowired
    private BasCrnErrorMapper basCrnErrorMapper;
    @Autowired
    private WrkMastService wrkMastService;
    @Autowired
    private WrkMastLogService wrkMastLogService;

    @Value("${wms.url}")
    private String wmsUrl;
@@ -117,50 +121,27 @@

                //LED
                LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());
                // 入出库模式判断
//                if ( inSta.getStaNo()==203 && devpThread.ioModeOf2F != IoModeType.PAKIN_MODE) { continue; }
//                if (inSta.getStaNo() == 203 && devpThread.ioModeOf2F == IoModeType.PAKOUT_MODE) {
//                    continue;
//                }

                // 判断是否满足入库条件
                if (!staProtocol.isLoading()){
                    continue;
                }
                String barcode11 = barcodeThread.getBarcode();
                if (Cools.isEmpty(barcode11)){
                    if (staProtocol.isAutoing()&& !staProtocol.isEmptyMk() && staProtocol.getWorkNo() == 9999 && staProtocol.isPakMk() && staProtocol.getStamp()==2){
                        staProtocol.setStamp(3);
                        News.info(""+mark+" - 7"+" - 扫码失败2 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode11, inSta.getStaNo());
                        staProtocol.setWorkNo((short) 9989);
                        staProtocol.setStaNo(inSta.getBackSta().shortValue());
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                        // led 异常显示
                        if (ledThread != null) {
                            String errorMsg = "扫码失败，请重试";
                            MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(5, errorMsg));
                        }
                        continue;
                    }
                }
                if (staProtocol.isAutoing() && staProtocol.isInEnable()
                        && !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() > 9990)
                        && staProtocol.isPakMk() && staProtocol.getStamp()>=2 && staProtocol.getStamp()!=3) {// && !Cools.isEmpty(barcode)) {

                if (staProtocol.isAutoing()
                        && staProtocol.isInEnable()
                        && !staProtocol.isEmptyMk()
                        && staProtocol.getWorkNo() == 9999
                        && staProtocol.isPakMk()) {
                    News.warnNoLog(""+mark+" - 0"+" - 开始执行");
//                    try {
//                        Thread.sleep(300);
//                    }catch (Exception e){}

                    String barcode = barcodeThread.getBarcode();
                    if(!Cools.isEmpty(barcode)) {
                        News.info(""+mark+" - 1"+" - {}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
                        if("NG".endsWith(barcode) || "NoRead".equals(barcode) || "empty".equals(barcode)) {
                            staProtocol.setWorkNo((short) 9999);
                            staProtocol.setStaNo(inSta.getBackSta().shortValue());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

//                            staProtocol.setWorkNo((short) 9992);
//                            staProtocol.setStaNo(inSta.getBackSta().shortValue());
//                            devpThread.setPakMk(staProtocol.getSiteId(), false);
//                            MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            News.info(""+mark+" - 2"+" - 扫码失败1 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode, inSta.getStaNo());
                            // led 异常显示
                            if (ledThread != null) {
@@ -170,10 +151,10 @@
                            continue;
                        }
                    } else {
                        staProtocol.setWorkNo((short) 9999);
                        staProtocol.setStaNo(inSta.getBackSta().shortValue());
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        staProtocol.setWorkNo((short) 9992);
//                        staProtocol.setStaNo(inSta.getBackSta().shortValue());
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

                        News.info(""+mark+" - 3"+" - 扫码失败2 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode, inSta.getStaNo());
                        // led 异常显示
@@ -195,13 +176,13 @@
                    }
                    if (wrkMast != null) {
                        News.error(""+mark+" - 4"+" - 工作档中已存在该站状态为（ 2.设备上走 ）的数据,工作号={}", wrkMast.getWrkNo());
                        staProtocol.setWorkNo((short)9999);
                        staProtocol.setStaNo(inSta.getBackSta().shortValue());
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                        if (!result) {
                            throw new CoolException("更新plc站点信息失败");
                        }
//                        staProtocol.setWorkNo((short)9992);
//                        staProtocol.setStaNo(inSta.getBackSta().shortValue());
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        if (!result) {
//                            throw new CoolException("更新plc站点信息失败");
//                        }

                        // led 异常显示
                        if (ledThread != null) {
@@ -209,6 +190,18 @@
                            MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(5, errorMsg));
                        }
                        continue;
                    }

                    if (inSta.getStaNo() == 1005) {
                        //检测是否有出库任务
                        List<WrkMast> wrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
                                .in("io_type", 101, 103, 107)
                                .in("sta_no", 1003, 1007)
                        );
                        if (!wrkMasts.isEmpty()) {
                            News.error(""+mark+" - 4"+" - 1003站入库，检测存在出库任务，等待出库任务执行完成,托盘码={}", barcode);
                            continue;
                        }
                    }

                    try {
@@ -229,9 +222,13 @@
                        if (jsonObject.getInteger("code").equals(200)) {
                            StartupDto dto = jsonObject.getObject("data", StartupDto.class);

                            LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
                                    .eq("loc_no", dto.getLocNo()));

                            barcodeThread.setBarcode("");
                            staProtocol.setWorkNo(dto.getWorkNo().shortValue());
                            staProtocol.setStaNo(dto.getStaNo().shortValue());
                            staProtocol.setPalletSize(locMast.getLocType2());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            if (!result) {
@@ -255,13 +252,13 @@
                            }
                        } else {
                            News.error(""+mark+" - 5"+" - 请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
                            staProtocol.setWorkNo((short)9999);
                            staProtocol.setStaNo(inSta.getBackSta().shortValue());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            if (!result) {
                                throw new CoolException("更新plc站点信息失败");
                            }
//                            staProtocol.setWorkNo((short)9992);
//                            staProtocol.setStaNo(inSta.getBackSta().shortValue());
//                            devpThread.setPakMk(staProtocol.getSiteId(), false);
//                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                            if (!result) {
//                                throw new CoolException("更新plc站点信息失败");
//                            }

                            // led 异常显示
                            if (ledThread != null) {
@@ -278,7 +275,7 @@
                }else {
                    News.errorNoLog(""+mark+" - 6"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isAutoing()+"、可入信号：" + staProtocol.isInEnable()
                            +"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
                            +"、锁定标记"+ staProtocol.isPakMk()+"、入库印记：" + staProtocol.getStamp());
                            +"、锁定标记"+ staProtocol.isPakMk());
                }

            }
@@ -305,17 +302,15 @@
                    staProtocol = staProtocol.clone();
                }

//                // 入出库模式判断
                if (inSta.getStaNo() == 203 && devpThread.ioModeOf2F != IoModeType.PAKIN_MODE) {
                    continue;
                }

                // 判断是否满足入库条件
                if (!staProtocol.isLoading()){
                    continue;
                }
                if (staProtocol.isAutoing() && staProtocol.isInEnable()
                        && !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() == 9999)

                if (staProtocol.isAutoing()
                        && staProtocol.isInEnable()
                        && !staProtocol.isEmptyMk()
                        && staProtocol.getWorkNo() > 0
                        && staProtocol.isPakMk()) {
                    News.warnNoLog(""+mark+" - 0"+" - 开始执行");
                    // 判断重复工作档
@@ -345,7 +340,7 @@
                }else {
                    News.errorNoLog(""+mark+" - 6"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isLoading()+"、可入信号：" + staProtocol.isInEnable()
                            +"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
                            +"、锁定标记"+ staProtocol.isPakMk()+"、入库印记：" + staProtocol.getStamp());
                            +"、锁定标记"+ staProtocol.isPakMk());
                }
            }
        }
@@ -360,21 +355,6 @@
        for (DevpSlave devp : slaveProperties.getDevp()) {
            // 遍历拣料入库口
            for (DevpSlave.Sta pickSta : devp.getPickSta()) {
                // 获取条码扫描仪信息
                BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
                if (barcodeThread == null) {
                    continue;
                }
                String barcode = barcodeThread.getBarcode();
                if(!Cools.isEmpty(barcode)) {
                    News.info(""+mark+" - 1"+" - {}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
                    if("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        continue;
                    }
                } else {
                    continue;
                }

                // 获取拣料入库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
                StaProtocol staProtocol = devpThread.getStation().get(pickSta.getStaNo());
@@ -384,13 +364,30 @@
                    staProtocol = staProtocol.clone();
                }

//                // 入出库模式判断
//                if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.isPakMk()) {
                if (staProtocol.isAutoing()
                        && staProtocol.isLoading()
                        && staProtocol.isInEnable()
                        && staProtocol.getWorkNo() > 0
                        && staProtocol.isPakMk()) {
                    News.warnNoLog(""+mark+" - 0"+" - 开始执行");
                    WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
//                    WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());

//                    // 获取条码扫描仪信息
//                    BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
//                    if (barcodeThread == null) {
//                        continue;
//                    }
//                    String barcode = barcodeThread.getBarcode();
//                    if(!Cools.isEmpty(barcode)) {
//                        News.info(""+mark+" - 1"+" - {}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
//                        if("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
//                            continue;
//                        }
//                    } else {
//                        continue;
//                    }

//                    WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
                    WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
                    if (wrkMast == null) {
                        // 无拣料数据
                        continue;
@@ -416,11 +413,11 @@
                            .eq("crn_no", wrkMast.getCrnNo()); // 堆垛机号
                    StaDesc staDesc = staDescService.selectOne(wrapper);
                    if (Cools.isEmpty(staDesc)) {
                        News.error(""+mark+" - 2"+" - 入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
                        staProtocol.setWorkNo((short) 9989);
                        staProtocol.setStaNo((short) (pickSta.getStaNo().shortValue()-(short)1));
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        News.error(""+mark+" - 2"+" - 入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
//                        staProtocol.setWorkNo((short) 9989);
//                        staProtocol.setStaNo((short) (pickSta.getStaNo().shortValue()-(short)1));
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                        //LED
                        LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());
                        // led 异常显示
@@ -471,9 +468,11 @@
                        continue;
                    }

                    LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
                    // 更新站点信息 且 下发plc命令
                    staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
                    staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
                    staProtocol.setPalletSize(locMast.getLocType2());
                    devpThread.setPakMk(staProtocol.getSiteId(), false);
                    boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                    if (!result) {
@@ -532,9 +531,13 @@

                        // 命令下发区 --------------------------------------------------------------------------

                        LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
                                .eq("loc_no", wrkMast.getSourceLocNo()));

                        // 下发站点信息
                        staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
                        staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
                        staProtocol.setPalletSize(locMast.getLocType2());
                        if (!MessageQueue.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol))) {
                            continue;
                        }
@@ -741,6 +744,17 @@
                continue;
            }

            if (crnProtocol.getCrnNo() == 1) {
                //判断堆垛机和当前任务是否处于一个巷道
                if (Utils.getLaneByLocNo(wrkMast.getLocNo()) != crnProtocol.getCrnLane()) {
                    //判断堆垛机所在巷道是否存在其他任务，如存在则优先执行
                    List<WrkMast> currentWrkMasts = wrkMastService.selectLaneWrkMast(crnProtocol.getCrnLane(), false);
                    if (!currentWrkMasts.isEmpty()) {
                        continue;//当前堆垛机所在巷道存在任务
                    }
                }
            }

            // 双深库位且浅库位有货，则需先对浅库位进行库位移转
            if (Utils.isDeepLoc(slaveProperties, wrkMast.getLocNo())) {
                News.warnNoLog(""+mark+" - 1"+" - 8"+" - 双深库位且浅库位有货，则需先对浅库位进行库位移转 : 开始执行 任务号={}",wrkMast.getWrkNo());
@@ -765,11 +779,16 @@
                    News.warnNoLog(""+mark+" - 1"+" - 12"+" - // F、D  库位状态={}",shallowLoc.getLocSts());
                    // 此标记避免多次执行移库任务
                    if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())) {
                        wrkMast.setUpdMk("Y");
                        wrkMast.setIoPri(14D);
                        wrkMastMapper.updateById(wrkMast);
                        // 生成工作档,将浅库位移转到新的库位中
                        moveLocForDeepLoc(slave, shallowLoc,mark);
                        if (moveLocForDeepLoc(slave, shallowLoc,mark)){
                            wrkMast.setUpdMk("Y");
                            wrkMast.setIoPri(14D);
                            wrkMastMapper.updateById(wrkMast);
                        }
//                        wrkMast.setUpdMk("Y");
//                        wrkMast.setIoPri(14D);
//                        wrkMastMapper.updateById(wrkMast);
//                        // 生成工作档,将浅库位移转到新的库位中
//                        moveLocForDeepLoc(slave, shallowLoc,mark);
                        // 生成工作档、改变浅库位的源库/目标库 库位状态、下发堆垛机命令（立马执行)
//                        moveLocForDeepLocPakin(slave, shallowLoc, wrkMast);
                    }
@@ -864,6 +883,18 @@
                    staProtocol = staProtocol.clone();
                }

                if (wrkMast.getStaNo() == 1003 || wrkMast.getStaNo() == 1007) {
                    //检测是否有入库任务
                    List<WrkMast> inWrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
                            .in("io_type", 1, 53, 57)
                            .in("source_sta_no", 1005)
                    );
                    if (!inWrkMasts.isEmpty()) {
                        News.error("" + mark + " - 2" + " - 检测存在入库任务，等待入库任务执行完成再出库，工作号={}" + wrkMast.getWrkNo());
                        continue;
                    }
                }

//            // 入出库模式判断
//            if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
//                if (wrkMast.getStaNo() == 204 && devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
@@ -887,6 +918,17 @@
                    if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) || crnProtocol.getTaskNo() != 0) {
//                        continue;
                        break;
                    }

                    if (crnProtocol.getCrnNo() == 1) {
                        //判断堆垛机和当前任务是否处于一个巷道
                        if (Utils.getLaneByLocNo(wrkMast.getLocNo()) != crnProtocol.getCrnLane()) {
                            //判断堆垛机所在巷道是否存在其他任务，如存在则优先执行
                            List<WrkMast> currentWrkMasts = wrkMastService.selectLaneWrkMast(crnProtocol.getCrnLane(), false);
                            if (!currentWrkMasts.isEmpty()) {
                                continue;//当前堆垛机所在巷道存在任务
                            }
                        }
                    }

                    // 双深库位且浅库位有货，则需先对浅库位进行库位移转
@@ -921,10 +963,15 @@
//                            if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())
//                                || Cools.isEmpty(waitWrkMast)) {
                            if (Cools.isEmpty(waitWrkMast)) {
                                wrkMast.setUpdMk("Y");
                                wrkMastMapper.updateById(wrkMast);
                                // 生成工作档,将浅库位移转到新的库位中
                                moveLocForDeepLoc(slave, shallowLoc,mark);
                                if (moveLocForDeepLoc(slave, shallowLoc,mark)){
                                    wrkMast.setUpdMk("Y");
//                                    wrkMast.setIoPri(14D);
                                    wrkMastMapper.updateById(wrkMast);
                                }
//                                wrkMast.setUpdMk("Y");
//                                wrkMastMapper.updateById(wrkMast);
//                                // 生成工作档,将浅库位移转到新的库位中
//                                moveLocForDeepLoc(slave, shallowLoc,mark);
                            }
                            News.error("{}任务出库失败，浅库位堵塞！浅库位号:{}", wrkMast.getWrkNo(), shallowLocNo);
                            continue;
@@ -1257,7 +1304,6 @@
     * 执行对工作档的完成操作
     */
    public synchronized void storeFinished(Integer mark) {

        for (CrnSlave crn : slaveProperties.getCrn()) {
            // 获取堆垛机信息
            CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
@@ -1456,7 +1502,7 @@
                        && staProtocol.isInEnable()
                        && staProtocol.isEmptyMk()
                        && (staProtocol.getWorkNo() > 9990 && staProtocol.getWorkNo() <= 9999)
                        && staProtocol.isPakMk()&& staProtocol.getStamp()>=2) {
                        && staProtocol.isPakMk()) {
                    News.warnNoLog(""+mark+" - 0"+" - 开始执行：空栈板初始化入库,叉车入库站放货");

                    try {
@@ -1501,7 +1547,7 @@
//                                ledThread.errorReset();
                            }
                        } else {
                            staProtocol.setWorkNo((short)9999);
                            staProtocol.setWorkNo((short)9992);
                            staProtocol.setStaNo(emptyInSta.getBackSta().shortValue());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
@@ -1608,11 +1654,21 @@
//                ledCommand.setSourceStaNo(wrkMast.getSourceStaNo());
                if (wrkMast.getIoType() != 110 && wrkMast.getIoType() != 10) {
                    List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
                    for (WrkDetl wrkDetl : wrkDetls){
                        LocDetl locDetl = locDetlService.selectMatnrSpecs(wrkDetl.getMatnr(), wrkDetl.getSpecs(), wrkMast.getSourceLocNo());
                        wrkDetl.setWeight(locDetl.getAnfme());
                    }
                    wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getAnfme(),wrkDetl.getWeight(),wrkDetl.getSpecs())));
//                    try{
//                        if (wrkMast.getIoType()>100){
//                            for (WrkDetl wrkDetl : wrkDetls){
//                                LocDetl locDetl = locDetlService.selectMatnrSpecs(wrkDetl.getMatnr(), wrkDetl.getSpecs(), wrkMast.getSourceLocNo());
//                                wrkDetl.setWeight(locDetl.getAnfme());
//                            }
//                        }else {
//                            for (WrkDetl wrkDetl : wrkDetls){
//                                wrkDetl.setWeight(wrkDetl.getAnfme());
//                            }
//                        }
//                    }catch (Exception e){
//                        log.error("工作档案明细输入电视机失败1：异常信息==》"+e);
//                    }
                    wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getAnfme(),wrkDetl.getWeight(),wrkDetl.getSpecs(),wrkDetl.getSku())));
                }
                commands.add(ledCommand);
            }
@@ -1793,7 +1849,7 @@
     * 因双深库位阻塞，对浅库位进行移转（立即执行版)
     * tip：同步
     */
    private synchronized void moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc,Integer mark) {
    private synchronized boolean moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc,Integer mark) {

        try {
            News.warnNoLog(""+mark+"moveLocForDeepLoc"+" - 0"+" - 开始执行:因双深库位阻塞，对浅库位进行移转（立即执行版)");
@@ -1839,80 +1895,96 @@

            if (null == loc) {
                News.error(""+mark+"moveLocForDeepLoc"+" - 1"+" - 双深库位 --- 浅库位阻塞异常！ 待移转浅库位：" + shallowLoc.getLocNo());
                throw new CoolException("双深库位 --- 浅库位阻塞异常！ 待移转浅库位：" + shallowLoc.getLocNo());
                return false;
//                throw new CoolException("双深库位 --- 浅库位阻塞异常！ 待移转浅库位：" + shallowLoc.getLocNo());
            } else {
                try {
                    // 获取工作号
                    int workNo = commonService.getWorkNo(0);
                    // 保存工作档
                    WrkMast wrkMast = new WrkMast();
                    wrkMast.setWrkNo(workNo);
                    wrkMast.setIoTime(new Date());
                    wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
                    wrkMast.setIoType(11); // 入出库状态： 11.库格移载
                    wrkMast.setIoPri(13D);
                    wrkMast.setCrnNo(crn.getId());
                    wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
                    wrkMast.setLocNo(loc.getLocNo()); // 目标库位
//                    wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
                    wrkMast.setFullPlt(shallowLoc.getLocSts().equals("D") ? "N" : "Y"); // 满板
                    wrkMast.setPicking("N"); // 拣料
                    wrkMast.setExitMk("N"); // 退出
                    wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
                    wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
                    wrkMast.setLinkMis("N");
                    wrkMast.setAppeTime(new Date());
                    wrkMast.setModiTime(new Date());
                    int res = wrkMastMapper.insert(wrkMast);
                    if (res == 0) {
                        News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 2"+" - 保存工作档失败");
//                        throw new CoolException("保存工作档失败");
                        return true;
                    }
                    // 工作档明细保存
                    if (shallowLoc.getLocSts().equals("F")) {
                        List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));

                        for (LocDetl locDetl : locDetls) {
                            WrkDetl wrkDetl = new WrkDetl();
                            wrkDetl.setWrkNo(workNo);
                            wrkDetl.setIoTime(new Date());
                            wrkDetl.setAnfme(locDetl.getAnfme());
                            VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
                            wrkDetl.setAppeTime(new Date());
                            wrkDetl.setModiTime(new Date());
                            if (!wrkDetlService.insert(wrkDetl)) {
                                News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 3"+" - 保存工作档明细失败");
//                                throw new CoolException("保存工作档明细失败");
                                return true;
                            }
                        }
                    }
                    // 修改源库位状态
                    if (shallowLoc.getLocSts().equals("D") || shallowLoc.getLocSts().equals("F")) {
                        shallowLoc.setLocSts("R"); // R.出库预约
                        shallowLoc.setModiTime(new Date());
                        if (!locMastService.updateById(shallowLoc)) {
                            News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 4"+" - 更新源库位状态失败");
//                            throw new CoolException("更新源库位状态失败");
                            return true;
                        }
                    } else {
                        News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 5"+" - 源库位出库失败");
//                        throw new CoolException("源库位出库失败");
                        return true;
                    }
                    // 修改目标库位状态
                    if (loc.getLocSts().equals("O")) {
                        loc.setLocSts("S"); // S.入库预约
                        loc.setModiTime(new Date());
                        if (!locMastService.updateById(loc)) {
                            News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 6"+" - 更新目标库位状态失败");
//                            throw new CoolException("更新目标库位状态失败");
                            return true;
                        }
                    } else {
                        News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 7"+" - 移转失败");
//                        throw new CoolException("移转失败");
                        return true;
                    }
                } catch (Exception e){
                    News.error(""+mark+"moveLocForDeepLoc"+" - 8"+" - 双深库位阻塞，对浅库位进行移转失败", e);
                }
            }

            // 获取工作号
            int workNo = commonService.getWorkNo(0);
            // 保存工作档
            WrkMast wrkMast = new WrkMast();
            wrkMast.setWrkNo(workNo);
            wrkMast.setIoTime(new Date());
            wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
            wrkMast.setIoType(11); // 入出库状态： 11.库格移载
            wrkMast.setIoPri(13D);
            wrkMast.setCrnNo(crn.getId());
            wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
            wrkMast.setLocNo(loc.getLocNo()); // 目标库位
            wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
            wrkMast.setPicking("N"); // 拣料
            wrkMast.setExitMk("N"); // 退出
            wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
            wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
            wrkMast.setLinkMis("N");
            wrkMast.setAppeTime(new Date());
            wrkMast.setModiTime(new Date());
            int res = wrkMastMapper.insert(wrkMast);
            if (res == 0) {
                News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 2"+" - 保存工作档失败");
                throw new CoolException("保存工作档失败");
            }
            // 工作档明细保存
            if (shallowLoc.getLocSts().equals("F")) {
                List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
                for (LocDetl locDetl : locDetls) {
                    WrkDetl wrkDetl = new WrkDetl();
                    wrkDetl.setWrkNo(workNo);
                    wrkDetl.setIoTime(new Date());
                    wrkDetl.setAnfme(locDetl.getAnfme());
                    VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
                    wrkDetl.setAppeTime(new Date());
                    wrkDetl.setModiTime(new Date());
                    if (!wrkDetlService.insert(wrkDetl)) {
                        News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 3"+" - 保存工作档明细失败");
                        throw new CoolException("保存工作档明细失败");
                    }
                }
            }
            // 修改源库位状态
            if (shallowLoc.getLocSts().equals("D") || shallowLoc.getLocSts().equals("F")) {
                shallowLoc.setLocSts("R"); // R.出库预约
                shallowLoc.setModiTime(new Date());
                if (!locMastService.updateById(shallowLoc)) {
                    News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 4"+" - 更新源库位状态失败");
                    throw new CoolException("更新源库位状态失败");
                }
            } else {
                News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 5"+" - 源库位出库失败");
                throw new CoolException("源库位出库失败");
            }
            // 修改目标库位状态
            if (loc.getLocSts().equals("O")) {
                loc.setLocSts("S"); // S.入库预约
                loc.setModiTime(new Date());
                if (!locMastService.updateById(loc)) {
                    News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 6"+" - 更新目标库位状态失败");
                    throw new CoolException("更新目标库位状态失败");
                }
            } else {
                News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 7"+" - 移转失败");
                throw new CoolException("移转失败");
            }

        } catch (Exception e) {
            News.error(""+mark+"moveLocForDeepLoc"+" - 8"+" - 双深库位阻塞，对浅库位进行移转失败", e);
            e.printStackTrace();
            TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
//            e.printStackTrace();
//            TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
        }
        return true;
    }

    /**
@@ -2066,161 +2138,184 @@
        }
    }

    /**
     * 入出库模式切换函数
     */
    public synchronized void ioConvert() {
        try {
            // 根据输送线plc遍历
            for (DevpSlave devp : slaveProperties.getDevp()) {
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
    // RGV  ===>> 执行对RGV操作
    public synchronized void rgvExecute(Integer mark) {
        ArrayList<Integer> list = new ArrayList<Integer>(){{add(1090);add(1091);}};
        for (Integer staNo : list) {
            Integer devpId = null;
            Integer rgvStaNo = null;
            if (staNo == 1090) {
                devpId = 1;
                rgvStaNo = 1091;
            }else {
                devpId = 2;
                rgvStaNo = 1090;
            }

                for (DevpSlave.Sta inSta : devp.getInSta()) {
                    if (inSta.getStaNo() == 2) {
                        continue;
                    }
                    WrkMast pakout = wrkMastMapper.selectWorkingPakout(inSta.getStaNo());
                    switch (inSta.getStaNo()) {
                        case 203://1F
                            if (pakout != null) {
                                if (devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf2F = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() + 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() + 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf2F = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf2F = IoModeType.PAKIN_MODE;
                            }
                            break;
                        case 401://1F
                            if (pakout != null) {
                                if (devpThread.ioModeOf4F != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf4F = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo() + 1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo() + 1).getWorkNo() == 0) {
                                        // 出库模式
                                        devpThread.ioModeOf4F = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf4F = IoModeType.PAKIN_MODE;
                            }
                            break;
                    }
            SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devpId);
            if (devpThread == null) {
                continue;
            }
            StaProtocol staProtocol = devpThread.getStation().get(staNo);
            if (staProtocol == null) {
                continue;
            } else {
                staProtocol = staProtocol.clone();
            }

            if (staProtocol.isAutoing()
                    && staProtocol.isLoading()
                    && staProtocol.isInEnable()
                    && staProtocol.getWorkNo() > 0
            ) {
                WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>()
                        .eq("wrk_no", staProtocol.getWorkNo()));
                if (wrkMast.getWrkSts() == 201) {
                    continue;
                }

            }
                RgvCommand command = new RgvCommand();
                command.setRgvNo(1); // RGV编号
                command.setAckFinish1((short) 0);  // 任务完成确认位
                command.setTaskNo1(wrkMast.getWrkNo().shortValue()); // 工作号
                command.setTaskMode1(RgvTaskModeType.FETCH_PUT); // 任务模式: 取放货
                command.setSourceStaNo1(staNo.shortValue()); // 源站
                command.setDestinationStaNo1(rgvStaNo.shortValue());  // 目标站
                command.setCommand((short) 0);

        } catch (Exception e) {
            e.printStackTrace();
        }


    }

    public synchronized void outOfDevp(Integer mark) {

        List<WrkMast> wrkMasts = wrkMastMapper.selectPick();
        if (wrkMasts.size()!=0){
            News.warnNoLog(""+mark+" - 0"+" - 开始执行outOfDevp");
        }
        for (WrkMast wrkMast : wrkMasts) {
            if (basDevpService.selectCount(new EntityWrapper<BasDevp>().eq("wrk_no", wrkMast.getWrkNo())) == 0) {
                wrkMast.setCtnNo("Y");
                if (wrkMastMapper.updateById(wrkMast) == 0) {
                    News.error(""+mark+" - 1"+" - 修改{}工作档失败，ctn_no", wrkMast.getWrkNo());
                boolean result = MessageQueue.offer(SlaveType.Rgv, 1, new Task(4, command));
                if (!result) {
                    throw new CoolException("RGV指令下发失败");
                }

                wrkMast.setWrkSts(201L);//201.RGV搬运中
                wrkMast.setModiTime(new Date());
                wrkMastService.updateById(wrkMast);
            }
        }
        News.infoNoLog(""+mark+" - 0"+" - outOfDevp执行完成");
    }


    public synchronized void autoEmptyOut() {
        DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, 1);
        Integer autoOutSite = 12;
        //如果站点可出禁用，则不生成空盘出库任务
        StaProtocol staProtocol = devpThread.getStation().get(autoOutSite);
        if (staProtocol == null) {
            return;
        } else {
            staProtocol = staProtocol.clone();
        }
        if (staProtocol.isAutoing()  //自动
                && !staProtocol.isLoading()  //无物
                && staProtocol.isOutEnable()  //可出信号
                && staProtocol.getWorkNo() == 0
        ) {
            WrkMast pakoutEmpty = wrkMastMapper.selectPakoutEmpty(autoOutSite);
            if (null != pakoutEmpty) {
                return;
    // RGV  ===>> 执行对RGV工作档的完成操作
    public synchronized void rgvFinished(Integer mark) {
        for (RgvSlave rgvSlave : slaveProperties.getRgv()) {
            // 获取RGV信息
            RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getId());
            if (rgvThread == null) {
                continue;
            }
            try {
                String response = new HttpHandler.Builder()
                        .setUri(wmsUrl)
                        .setPath("/rpc/auto/emptyOut/v1")
                        .build()
                        .doPost();
                JSONObject jsonObject = JSON.parseObject(response);
                if (jsonObject.getInteger("code").equals(200)) {
                    JSONObject data = (JSONObject) jsonObject.get("data");
                    News.info((String) data.get("msg"));

            RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
            if (rgvProtocol == null) {
                continue;
            }

            //  状态：等待确认 并且  任务完成位 = 1
            if (rgvProtocol.statusType == RgvStatusType.WAITING && rgvProtocol.getTaskNo1() != 0) {
                News.warnNoLog(""+mark+" - 0"+" - 开始执行对RGV工作档的完成操作");
                // 获取入库待确认工作档
                WrkMast wrkMast = wrkMastMapper.selectPakInStep3(rgvProtocol.getTaskNo1().intValue());
                if (wrkMast == null) {
                    News.error(""+mark+" - 1"+" - RGV处于等待确认且任务完成状态，但未找到工作档。RGV号={}，工作号={}", rgvSlave.getId(), rgvProtocol.getTaskNo1());
                    continue;
                }

                if (Cools.isEmpty(wrkMast.getMemo())) {
                    News.error(""+mark+" - 1"+" - RGV处于等待确认且任务完成状态，但工作档数据异常。RGV号={}，工作号={}", rgvSlave.getId(), rgvProtocol.getTaskNo1());
                    continue;
                }

                Integer devpId = null;
                Integer devpStaNo = null;
                String locNo = null;
                if (wrkMast.getIoType() < 100) {
                    //入库
                    wrkMast.setWrkSts(2L);
                    devpId = 1;
                    devpStaNo = 1090;
                    locNo = wrkMast.getLocNo();
                }else {
                    //出库
                    wrkMast.setWrkSts(15L);
                    devpId = 2;
                    devpStaNo = 1091;
                    locNo = wrkMast.getSourceLocNo();
                }

                // 获取入库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devpId);
                StaProtocol staProtocol = devpThread.getStation().get(devpStaNo);
                if (staProtocol == null) {
                    continue;
                } else {
                    News.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyOut/v1","", response);
                    staProtocol = staProtocol.clone();
                }
            } catch (Exception e) {
                e.printStackTrace();
                TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();

                if (staProtocol.isAutoing()
                        && staProtocol.isLoading()
                        && staProtocol.getWorkNo() == 0
                ) {
                    LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
                            .eq("loc_no", locNo));
                    staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
                    staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
                    staProtocol.setPalletSize(locMast.getLocType2());
                    devpThread.setPakMk(staProtocol.getSiteId(), false);
                    boolean result = MessageQueue.offer(SlaveType.Devp, devpId, new Task(2, staProtocol));
                    if (!result) {
                        throw new CoolException("更新plc站点信息失败");
                    }

                    Date now = new Date();
                    wrkMast.setModiTime(now);
                    wrkMastMapper.updateById(wrkMast);
                }
            }
        }
        News.infoNoLog(""+mark+" - 0"+" - 对工作档的完成操作执行完成");
    }

    public synchronized void autoEmptyIn() {
        DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, 1);
        Integer autoInSite = 12;
        StaProtocol staProtocol = devpThread.getStation().get(autoInSite);
        if (staProtocol == null) {
            return;
        } else {
            staProtocol = staProtocol.clone();
        }
        if (staProtocol.isAutoing()  //自动
                && staProtocol.isLoading()  //有物
                && staProtocol.isInEnable()  //可入信号
                && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() > 9990) //工作号为0或者工作号是9991~9999（输送机留用）
        ) {

            try {
                LocTypeDto locTypeDto = new LocTypeDto((short) 1, (short) 1, (short) 1);


                String response = new HttpHandler.Builder()
                        .setUri(wmsUrl)
                        .setPath("/rpc/auto/emptyIn/v1")
                        .setJson(JSON.toJSONString(locTypeDto))
                        .build()
                        .doPost();
                JSONObject jsonObject = JSON.parseObject(response);
                if (jsonObject.getInteger("code").equals(200)) {
                    News.info((String) jsonObject.get("msg"));
                } else {
                    News.error("请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/auto/emptyIn/v1", JSON.toJSONString(locTypeDto), response);
                }
            } catch (Exception e) {
                e.printStackTrace();
                TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
            }
        }
    }
//    /**
//     * 入出库模式切换函数
//     */
//    public synchronized void ioConvert() {
//        try {
//            // 根据输送线plc遍历
//            for (DevpSlave devp : slaveProperties.getDevp()) {
//                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
//
//                for (DevpSlave.Sta inSta : devp.getInSta()) {
//                    if (inSta.getStaNo() == 2) {
//                        continue;
//                    }
//                    WrkMast pakout = wrkMastMapper.selectWorkingPakout(inSta.getStaNo());
//                    switch (inSta.getStaNo()) {
//                        case 101://1F
//                            if (pakout != null) {
//                                if (devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
//                                    // 出库切换中
//                                    devpThread.ioModeOf2F = IoModeType.PAKOUT_BOOTING;
//                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
//                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
//                                            && !devpThread.getStation().get(inSta.getStaNo() + 1).isLoading()
//                                            && devpThread.getStation().get(inSta.getStaNo() + 1).getWorkNo() == 0) {
//                                        // 出库模式
//                                        devpThread.ioModeOf2F = IoModeType.PAKOUT_MODE;
//                                    }
//                                }
//                            } else {
//                                // 入库模式
//                                devpThread.ioModeOf2F = IoModeType.PAKIN_MODE;
//                            }
//                            break;
//                    }
//                }
//
//            }
//
//        } catch (Exception e) {
//            e.printStackTrace();
//        }
//
//
//    }
}