zy-wcs.git - Gitblit

			@@ -6,6 +6,7 @@
			import com.baomidou.mybatisplus.mapper.Wrapper;
			import com.core.common.Cools;
			import com.core.common.DateUtils;
			import com.core.common.R;
			import com.core.exception.CoolException;
			import com.zy.asrs.entity.*;
			import com.zy.asrs.mapper.BasCrnErrorMapper;
			@@ -13,7 +14,7 @@
			import com.zy.asrs.mapper.WrkMastMapper;
			import com.zy.asrs.service.*;
			import com.zy.asrs.utils.Utils;
			import com.zy.asrs.utils.VersionUtils;
			import com.zy.common.constant.RedisConstantType;
			import com.zy.common.model.LocTypeDto;
			import com.zy.common.model.MatDto;
			import com.zy.common.model.SearchLocParam;
			@@ -22,6 +23,7 @@
			import com.zy.common.utils.CollectionUtils;
			import com.zy.common.utils.HttpHandler;
			import com.zy.common.utils.News;
			import com.zy.common.utils.RedisUtil;
			import com.zy.core.CrnThread;
			import com.zy.core.DevpThread;
			import com.zy.core.cache.MessageQueue;
			@@ -39,6 +41,8 @@
			import com.zy.core.thread.LedThread;
			import com.zy.core.thread.RgvThread;
			import com.zy.core.thread.SiemensDevpThread;
			import com.zy.system.entity.Config;
			import com.zy.system.service.ConfigService;
			import lombok.extern.slf4j.Slf4j;
			import org.springframework.beans.factory.annotation.Autowired;
			import org.springframework.beans.factory.annotation.Value;
			@@ -91,6 +95,10 @@
			private WrkMastService wrkMastService;
			@Autowired
			private WrkMastLogService wrkMastLogService;
			@Autowired
			private ConfigService configService;
			@Autowired
			private RedisUtil redisUtil;

			@Value("${wms.url}")
			private String wmsUrl;
			@@ -123,7 +131,7 @@
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, inSta.getLed());

			// 判断是否满足入库条件
			if (!staProtocol.isLoading()){
			if (!staProtocol.isLoading()) {
			continue;
			}

			@@ -131,18 +139,18 @@
			&& staProtocol.isInEnable()
			&& !staProtocol.isEmptyMk()
			&& staProtocol.getWorkNo() == 9999
			&& staProtocol.isPakMk()) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行");
			&& staProtocol.isPakMk() && (staProtocol.getEmptyInType() != 1 && staProtocol.getEmptyInType() != 2)) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行");

			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {
			News.info(""+mark+" - 1"+" - {}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode)) {
			if (!Cools.isEmpty(barcode)) {
			News.info("" + mark + " - 1" + " - {}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode)) {
			// staProtocol.setWorkNo((short) 9992);
			// staProtocol.setStaNo(inSta.getBackSta().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			News.info(""+mark+" - 2"+" - 扫码失败1 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode, inSta.getStaNo());
			News.info("" + mark + " - 2" + " - 扫码失败1 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode, inSta.getStaNo());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			@@ -156,7 +164,7 @@
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));

			News.info(""+mark+" - 3"+" - 扫码失败2 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode, inSta.getStaNo());
			News.info("" + mark + " - 3" + " - 扫码失败2 ===>> {}号条码扫描器检测条码信息：{},站点:{}", inSta.getBarcode(), barcode, inSta.getStaNo());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			@@ -169,13 +177,13 @@
			WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
			//过滤判断，防止拣料再入库货物，经过入库站再入库时，被退回到退库站
			WrkMast wrkMast1 = wrkMastMapper.selectPakInStepBarcode(barcode);
			if (wrkMast1 !=null){
			if (wrkMast1.getIoType()==103 \|\| wrkMast1.getIoType()==107 \|\| wrkMast1.getIoType()==104){
			if (wrkMast1 != null) {
			if (wrkMast1.getIoType() == 103 \|\| wrkMast1.getIoType() == 107 \|\| wrkMast1.getIoType() == 104) {
			continue;
			}
			}
			if (wrkMast != null) {
			News.error(""+mark+" - 4"+" - 工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast.getWrkNo());
			News.error("" + mark + " - 4" + " - 工作档中已存在该站状态为（ 2.设备上走）的数据,工作号={}", wrkMast.getWrkNo());
			// staProtocol.setWorkNo((short)9992);
			// staProtocol.setStaNo(inSta.getBackSta().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			@@ -199,7 +207,7 @@
			.in("sta_no", 1003, 1007)
			);
			if (!wrkMasts.isEmpty()) {
			News.error(""+mark+" - 4"+" - 1003站入库，检测存在出库任务，等待出库任务执行完成,托盘码={}", barcode);
			News.error("" + mark + " - 4" + " - 1003站入库，检测存在出库任务，等待出库任务执行完成,托盘码={}", barcode);
			continue;
			}
			}
			@@ -225,9 +233,14 @@
			LocMast locMast = locMastService.selectOne(new EntityWrapper<LocMast>()
			.eq("loc_no", dto.getLocNo()));

			short staNo = dto.getStaNo().shortValue();
			if (inSta.getStaNo() == 1002) {
			staNo = 2002;
			}

			barcodeThread.setBarcode("");
			staProtocol.setWorkNo(dto.getWorkNo().shortValue());
			staProtocol.setStaNo(dto.getStaNo().shortValue());
			staProtocol.setStaNo(staNo);
			staProtocol.setPalletSize(locMast.getLocType2());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			@@ -235,23 +248,23 @@
			throw new CoolException("更新plc站点信息失败");
			}

			// led 入库信息显示
			if (ledThread != null) {
			// 命令集合
			List<LedCommand> commands = new ArrayList<>();
			// 组装命令
			LedCommand ledCommand = new LedCommand();
			ledCommand.setWorkNo(dto.getWorkNo());
			ledCommand.setIoType(1);
			ledCommand.setTitle("全板入库");
			ledCommand.setLocNo(dto.getLocNo());
			ledCommand.setStaNo(dto.getStaNo());
			commands.add(ledCommand);
			MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, commands));
			// ledThread.errorReset();
			}
			// // led 入库信息显示
			// if (ledThread != null) {
			// // 命令集合
			// List<LedCommand> commands = new ArrayList<>();
			// // 组装命令
			// LedCommand ledCommand = new LedCommand();
			// ledCommand.setWorkNo(dto.getWorkNo());
			// ledCommand.setIoType(1);
			// ledCommand.setTitle("全板入库");
			// ledCommand.setLocNo(dto.getLocNo());
			// ledCommand.setStaNo(dto.getStaNo());
			// commands.add(ledCommand);
			// MessageQueue.offer(SlaveType.Led, inSta.getLed(), new Task(3, commands));
			//// ledThread.errorReset();
			// }
			} else {
			News.error(""+mark+" - 5"+" - 请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			News.error("" + mark + " - 5" + " - 请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			// staProtocol.setWorkNo((short)9992);
			// staProtocol.setStaNo(inSta.getBackSta().shortValue());
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			@@ -272,15 +285,15 @@
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			}else {
			News.errorNoLog(""+mark+" - 6"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isAutoing()+"、可入信号：" + staProtocol.isInEnable()
			+"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
			+"、锁定标记"+ staProtocol.isPakMk());
			} else {
			News.errorNoLog("" + mark + " - 6" + " - 站点信息不符合入库条件！！！" + " 自动信号：" + staProtocol.isAutoing() + "、可入信号：" + staProtocol.isInEnable()
			+ "、空板信号：" + staProtocol.isEmptyMk() + "、工作号：" + staProtocol.getWorkNo()
			+ "、锁定标记" + staProtocol.isPakMk());
			}

			}
			}
			News.infoNoLog(""+mark+" - 0"+" - 组托 ===》执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 组托 ===》执行完成");

			}

			@@ -303,7 +316,7 @@
			}

			// 判断是否满足入库条件
			if (!staProtocol.isLoading()){
			if (!staProtocol.isLoading()) {
			continue;
			}

			@@ -312,7 +325,7 @@
			&& !staProtocol.isEmptyMk()
			&& staProtocol.getWorkNo() > 0
			&& staProtocol.isPakMk()) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行");
			News.warnNoLog("" + mark + " - 0" + " - 开始执行");
			// 判断重复工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep11(inSta.getStaNo());
			if (wrkMast == null) {
			@@ -331,20 +344,20 @@
			wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 1"+" - 更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			News.error("" + mark + " - 1" + " - 更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
			}
			} else {
			News.error(""+mark+" - 2"+" - 发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			News.error("" + mark + " - 2" + " - 发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}

			}else {
			News.errorNoLog(""+mark+" - 6"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isLoading()+"、可入信号：" + staProtocol.isInEnable()
			+"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
			+"、锁定标记"+ staProtocol.isPakMk());
			} else {
			News.errorNoLog("" + mark + " - 6" + " - 站点信息不符合入库条件！！！" + " 自动信号：" + staProtocol.isLoading() + "、可入信号：" + staProtocol.isInEnable()
			+ "、空板信号：" + staProtocol.isEmptyMk() + "、工作号：" + staProtocol.getWorkNo()
			+ "、锁定标记" + staProtocol.isPakMk());
			}
			}
			}
			News.infoNoLog(""+mark+" - 0"+" - wms入库 ===》执行完成");
			News.infoNoLog("" + mark + " - 0" + " - wms入库 ===》执行完成");

			}

			@@ -364,26 +377,30 @@
			staProtocol = staProtocol.clone();
			}

			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.isPakMk()) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行");
			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& staProtocol.getWorkNo() > 0
			&& staProtocol.isPakMk()) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行");

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if(!Cools.isEmpty(barcode)) {
			News.info(""+mark+" - 1"+" - {}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			continue;
			}
			} else {
			continue;
			}
			// // 获取条码扫描仪信息
			// BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
			// if (barcodeThread == null) {
			// continue;
			// }
			// String barcode = barcodeThread.getBarcode();
			// if(!Cools.isEmpty(barcode)) {
			// News.info(""+mark+" - 1"+" - {}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
			// if("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			// continue;
			// }
			// } else {
			// continue;
			// }

			WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
			// WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
			// WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
			if (wrkMast == null) {
			// 无拣料数据
			continue;
			@@ -409,16 +426,16 @@
			.eq("crn_no", wrkMast.getCrnNo()); // 堆垛机号
			StaDesc staDesc = staDescService.selectOne(wrapper);
			if (Cools.isEmpty(staDesc)) {
			News.error(""+mark+" - 2"+" - 入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
			staProtocol.setWorkNo((short) 9989);
			staProtocol.setStaNo((short) (pickSta.getStaNo().shortValue()-(short)1));
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			// News.error(""+mark+" - 2"+" - 入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
			// staProtocol.setWorkNo((short) 9989);
			// staProtocol.setStaNo((short) (pickSta.getStaNo().shortValue()-(short)1));
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			//LED
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, pickSta.getLed());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "此为拣料、并板、盘点再入库.请放在"+pickSta.getBackSta().shortValue()+"站点";
			String errorMsg = "此为拣料、并板、盘点再入库.请放在" + pickSta.getBackSta().shortValue() + "站点";
			MessageQueue.offer(SlaveType.Led, pickSta.getLed(), new Task(5, errorMsg));
			}
			continue;
			@@ -446,6 +463,7 @@
			wrkMast.setLocNo(wrkMast.getSourceLocNo()); // 目标库位 = 出库时的源库位
			wrkMast.setSourceLocNo(""); // 源库位清空
			wrkMast.setModiTime(now);
			wrkMast.setUpdMk("");//允许再次移库
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("更新工作档数据状态失败");
			}
			@@ -472,18 +490,160 @@
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.error(""+mark+" - 3"+" - 发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			News.error("" + mark + " - 3" + " - 发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}

			}else {
			News.errorNoLog(""+mark+" - 6"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isLoading()+"、可入信号：" + staProtocol.isInEnable()
			+"、空板信号："+ staProtocol.isEmptyMk());
			} else {
			News.errorNoLog("" + mark + " - 6" + " - 站点信息不符合入库条件！！！" + " 自动信号：" + staProtocol.isLoading() + "、可入信号：" + staProtocol.isInEnable()
			+ "、空板信号：" + staProtocol.isEmptyMk());
			}

			}

			}
			News.infoNoLog(""+mark+" - 0"+" - 拣料、并板、盘点再入库 ===》执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 拣料、并板、盘点再入库 ===》执行完成");
			}

			/**
			* 拣料、并板、盘点再入库-条码
			*/
			public synchronized void stnToCrnStnPickBarcode(Integer mark) {
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历拣料入库口
			for (DevpSlave.Sta insta : devp.getInSta()) {
			// 获取拣料入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(insta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.isInEnable()
			&& staProtocol.getWorkNo() > 0
			&& staProtocol.isPakMk()) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行");

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, insta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}
			String barcode = barcodeThread.getBarcode();
			if (!Cools.isEmpty(barcode)) {
			News.info("" + mark + " - 1" + " - {}号条码扫描器检测条码信息：{}", insta.getBarcode(), barcode);
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode)) {
			continue;
			}
			} else {
			continue;
			}

			WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
			if (wrkMast == null) {
			// 无拣料数据
			continue;
			}
			if ((wrkMast.getIoType() != 103 && wrkMast.getIoType() != 104 && wrkMast.getIoType() != 107)
			\|\| Cools.isEmpty(wrkMast.getStaNo()) \|\| Cools.isEmpty(wrkMast.getSourceStaNo())) {
			continue;
			}

			// 拣、盘、并作业站转换
			// int stnNo = 0;
			// if (wrkMast.getStaNo() == 109) {
			// stnNo = 127;
			// } else if (wrkMast.getStaNo() == 113) {
			// stnNo = 128;
			// } else {
			// log.error("{}号任务数据异常！", wrkMast.getWrkNo());
			// }
			// 获取目标站
			Wrapper<StaDesc> wrapper = new EntityWrapper<StaDesc>()
			.eq("type_no", wrkMast.getIoType() - 50)
			.eq("stn_no", insta.getStaNo()) // 作业站点 = 拣料出库的目标站
			.eq("crn_no", wrkMast.getCrnNo()); // 堆垛机号
			StaDesc staDesc = staDescService.selectOne(wrapper);
			if (Cools.isEmpty(staDesc)) {
			// News.error(""+mark+" - 2"+" - 入库路径不存在！type_no={},stn_no={},crn_no={}", wrkMast.getIoType(), pickSta.getStaNo(), wrkMast.getCrnNo());
			// staProtocol.setWorkNo((short) 9989);
			// staProtocol.setStaNo((short) (pickSta.getStaNo().shortValue()-(short)1));
			// devpThread.setPakMk(staProtocol.getSiteId(), false);
			// MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			//LED
			LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, insta.getLed());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "此为拣料、并板、盘点再入库.请放在" + insta.getBackSta().shortValue() + "站点";
			MessageQueue.offer(SlaveType.Led, insta.getLed(), new Task(5, errorMsg));
			}
			continue;
			}

			try {
			// 保存工作明细档历史档
			if (wrkMastMapper.saveWrkDetlLog(wrkMast.getWrkNo()) == 0) {
			throw new CoolException("保存工作明细档历史档失败");
			}
			// 保存工作主档历史档
			if (wrkMastMapper.saveWrkMastLog(wrkMast.getWrkNo()) == 0) {
			throw new CoolException("保存工作主档历史档失败");
			}

			Date now = new Date();
			// 堆垛机站点(目标站)
			Integer staNo = staDesc.getCrnStn();
			// 更新工作档数据状态
			wrkMast.setIoTime(now);
			wrkMast.setIoType(wrkMast.getIoType() - 50); // 入出库类型: 103->53,104->54,107->57
			wrkMast.setWrkSts(2L); // 工作状态: 2.设备上走
			wrkMast.setSourceStaNo(wrkMast.getStaNo()); // 源站
			wrkMast.setStaNo(staNo); // 目标站
			wrkMast.setLocNo(wrkMast.getSourceLocNo()); // 目标库位 = 出库时的源库位
			wrkMast.setSourceLocNo(""); // 源库位清空
			wrkMast.setModiTime(now);
			wrkMast.setUpdMk("");//允许再次移库
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			throw new CoolException("更新工作档数据状态失败");
			}
			// 更新明细档io_time (历史档关联使用）
			wrkDetlService.updateIoTime(wrkMast.getWrkNo(), now);
			// 修改库位状态 Q.拣料/盘点/并板再入库
			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			locMast.setLocSts("Q");
			locMast.setModiTime(new Date());
			if (!locMastService.updateById(locMast)) {
			throw new CoolException("修改库位状态失败");
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			continue;
			}

			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			staProtocol.setPalletSize(locMast.getLocType2());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.error("" + mark + " - 3" + " - 发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
			}

			} else {
			News.errorNoLog("" + mark + " - 6" + " - 站点信息不符合入库条件！！！" + " 自动信号：" + staProtocol.isLoading() + "、可入信号：" + staProtocol.isInEnable()
			+ "、空板信号：" + staProtocol.isEmptyMk());
			}

			}

			}
			News.infoNoLog("" + mark + " - 0" + " - 拣料、并板、盘点再入库 ===》执行完成");
			}

			/**
			@@ -523,7 +683,7 @@
			if (crnProtocol.modeType == CrnModeType.AUTO && crnProtocol.getTaskNo().equals(wrkMast.getWrkNo().shortValue())
			&& crnProtocol.statusType == CrnStatusType.WAITING
			&& crnProtocol.forkPosType == CrnForkPosType.HOME) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行");
			News.warnNoLog("" + mark + " - 0" + " - 开始执行");

			// 命令下发区 --------------------------------------------------------------------------

			@@ -545,21 +705,21 @@
			// 复位堆垛机
			crnThread.setResetFlag(true);
			} else {
			News.error(""+mark+" - 1"+" - 更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			News.error("" + mark + " - 1" + " - 更新工作档的工作状态为14失败！！！ [工作号:{}]", wrkMast.getWrkNo());
			}

			}else {
			News.errorNoLog(""+mark+" - 6"+" - 堆垛机信息不符合入库条件！！！"
			+" 堆垛机状态："+crnProtocol.modeType+"==自动AUTO：" + CrnModeType.AUTO
			+"、堆垛机任务号："+crnProtocol.getTaskNo()+"==工作档任务号：" + wrkMast.getWrkNo().shortValue()
			+"、状态枚举："+crnProtocol.statusType+"==WAITING：90 //任务完成等待WCS确认)：" + CrnStatusType.WAITING
			+"、货叉位置："+crnProtocol.forkPosType+"==HOME：0 // 货叉原位：" + CrnForkPosType.HOME);
			} else {
			News.errorNoLog("" + mark + " - 6" + " - 堆垛机信息不符合入库条件！！！"
			+ " 堆垛机状态：" + crnProtocol.modeType + "==自动AUTO：" + CrnModeType.AUTO
			+ "、堆垛机任务号：" + crnProtocol.getTaskNo() + "==工作档任务号：" + wrkMast.getWrkNo().shortValue()
			+ "、状态枚举：" + crnProtocol.statusType + "==WAITING：90 //任务完成等待WCS确认)：" + CrnStatusType.WAITING
			+ "、货叉位置：" + crnProtocol.forkPosType + "==HOME：0 // 货叉原位：" + CrnForkPosType.HOME);
			}

			}
			}
			}
			News.infoNoLog(""+mark+" - 0"+" - 堆垛机站出库到出库站 ===》执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 堆垛机站出库到出库站 ===》执行完成");
			}

			/**
			@@ -576,7 +736,7 @@
			}
			BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			if (basCrnp == null) {
			News.error(""+mark+" - 1"+" - {}号堆垛机尚未在数据库进行维护！", crn.getId());
			News.error("" + mark + " - 1" + " - {}号堆垛机尚未在数据库进行维护！", crn.getId());
			continue;
			}

			@@ -588,108 +748,196 @@
			// 只有当堆垛机空闲并且无任务时才继续执行
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO
			&& crnProtocol.getLoaded() == 0 && crnProtocol.getForkPos() == 0) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行堆垛机入出库作业下发");
			News.warnNoLog("" + mark + " - 0" + " - 开始执行堆垛机入出库作业下发");
			// 如果最近一次是入库模式
			if (crnProtocol.getLastIo().equals("I")) {
			if (basCrnp.getInEnable().equals("Y")) {
			//mark - 1 - ....
			this.crnStnToLoc(crn, crnProtocol,mark); // 入库
			this.crnStnToLoc(crn, crnProtocol, mark); // 入库
			crnProtocol.setLastIo("O");
			} else if (basCrnp.getOutEnable().equals("Y")) {
			//mark - 2 - ....
			this.locToCrnStn(crn, crnProtocol,mark); // 出库
			this.locToCrnStn(crn, crnProtocol, mark); // 出库
			crnProtocol.setLastIo("I");
			}
			}
			// 如果最近一次是出库模式
			else if (crnProtocol.getLastIo().equals("O")) {
			if (basCrnp.getOutEnable().equals("Y")) {
			this.locToCrnStn(crn, crnProtocol,mark); // 出库
			this.locToCrnStn(crn, crnProtocol, mark); // 出库
			crnProtocol.setLastIo("I");
			} else if (basCrnp.getInEnable().equals("Y")) {
			this.crnStnToLoc(crn, crnProtocol,mark); // 入库
			this.crnStnToLoc(crn, crnProtocol, mark); // 入库
			crnProtocol.setLastIo("O");
			}
			}
			}
			// 库位移转
			//mark - 3 - ....
			this.locToLoc(crn, crnProtocol,mark);
			this.locToLoc111(crn, crnProtocol,mark);
			this.locToLoc(crn, crnProtocol, mark);
			this.locToLoc111(crn, crnProtocol, mark);
			// this.crnRebackHp(crnProtocol, crnThread);

			}
			News.infoNoLog(""+mark+" - 0"+" - 堆垛机入出库作业下发执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 堆垛机入出库作业下发执行完成");
			}

			/**
			* 回原点，堆垛机没有执行中任务，设备存在入库任务时叫回原点
			* 堆垛机无任务两分钟，回入库口待机
			*/
			public synchronized void crnRebackHp(CrnProtocol crnProtocol, CrnThread crnThread) {
			// for (CrnSlave crn : slaveProperties.getCrn()) {
			// // 获取堆垛机信息
			// CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			// CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			// if (crnProtocol == null) {
			// continue;
			// }
			// BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			// if (basCrnp == null) {
			// log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			// continue;
			// }
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if (crnProtocol.getBay() == 1 && crnProtocol.getLevel() == 1) {
			return;
			public synchronized void crnMove() {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			if (crn.getId() == 1) {
			continue;
			}

			// 已经存在吊车执行任务时，则过滤3,12
			if (wrkMastMapper.selectWorking(crnProtocol.getCrnNo()) != null) {
			return;
			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			continue;
			}
			BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			if (basCrnp == null) {
			log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			continue;
			}

			//堆垛机有执行中任务，过滤3,4,11,12
			if (wrkMastMapper.selectCrnWorking(crnProtocol.getCrnNo()) != null) {
			return;
			}
			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if (crnProtocol.getBay() == 1 && crnProtocol.getLevel() == 1) {
			continue;
			}

			//输送线没有入库任务，过滤2
			if (wrkMastMapper.selectDevWorking(crnProtocol.getCrnNo()) == null) {
			return;
			if (System.currentTimeMillis() - crnProtocol.getLastCommandTime() < 1000 * 60 * 2) {
			continue;
			}

			Object object = redisUtil.get(RedisConstantType.CRN_MOVE_LOCK);
			if (object != null) {
			continue;
			}

			List<WrkMast> wrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
			.eq("crn_no", crn.getId())
			.notIn("wrk_sts", 5, 14, 15)
			);
			if (!wrkMasts.isEmpty()) {
			continue;
			}

			CrnSlave.CrnStn crnStn = crn.getCrnInStn().get(0);

			News.info("堆垛机无任务自动回入库口待机==>>" + crnProtocol.getCrnNo() + "号堆垛机");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.CRN_MOVE); // 任务模式: 堆垛机移动
			crnCommand.setSourcePosX(crnStn.getRow().shortValue()); // 源库位排
			crnCommand.setSourcePosY((short) 1); // 源库位列
			crnCommand.setSourcePosZ((short) 1); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			News.error("堆垛机移动命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			crnThread.setBackHpFlag(true);
			redisUtil.set(RedisConstantType.CRN_MOVE_LOCK + crn.getId(), "lock", 60);
			try {
			Thread.sleep(500);
			} catch (Exception e) {
			e.printStackTrace();
			}
			}
			News.info("堆垛机召回原点==>>" + crnProtocol.getCrnNo() + "号堆垛机有入库任务,召回原点");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.GO_ORIGIN); // 任务模式: 回原点
			crnCommand.setSourcePosX((short) 0); // 源库位排
			crnCommand.setSourcePosY((short) 0); // 源库位列
			crnCommand.setSourcePosZ((short) 0); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			News.error("堆垛机回原点命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			crnThread.setBackHpFlag(true);
			}
			// }
			}

			/**
			* 堆垛机有入库任务时，回入库口待机
			*/
			public synchronized void crnMoveByInTask() {
			for (CrnSlave crn : slaveProperties.getCrn()) {
			if (crn.getId() == 1) {
			continue;
			}

			// 获取堆垛机信息
			CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
			CrnProtocol crnProtocol = crnThread.getCrnProtocol();
			if (crnProtocol == null) {
			continue;
			}
			BasCrnp basCrnp = basCrnpService.selectById(crn.getId());
			if (basCrnp == null) {
			log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
			continue;
			}

			if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
			if (crnProtocol.getBay() == 1 && crnProtocol.getLevel() == 1) {
			continue;
			}

			if (System.currentTimeMillis() - crnProtocol.getLastCommandTime() < 1000 * 60) {
			continue;
			}

			Object object = redisUtil.get(RedisConstantType.CRN_MOVE_LOCK);
			if (object != null) {
			continue;
			}

			List<WrkMast> wrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
			.eq("crn_no", crn.getId())
			.eq("wrk_sts", 2)
			);
			if (wrkMasts.isEmpty()) {
			continue;
			}

			CrnSlave.CrnStn crnStn = crn.getCrnInStn().get(0);

			News.info("堆垛机有入库任务时，回入库口待机==>>" + crnProtocol.getCrnNo() + "号堆垛机");
			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			crnCommand.setCrnNo(crnProtocol.getCrnNo()); // 堆垛机编号
			crnCommand.setTaskNo((short) 9999); // 工作号
			crnCommand.setAckFinish((short) 0); // 任务完成确认位
			crnCommand.setTaskMode(CrnTaskModeType.CRN_MOVE); // 任务模式: 堆垛机移动
			crnCommand.setSourcePosX(crnStn.getRow().shortValue()); // 源库位排
			crnCommand.setSourcePosY((short) 1); // 源库位列
			crnCommand.setSourcePosZ((short) 1); // 源库位层
			crnCommand.setDestinationPosX((short) 0); // 目标库位排
			crnCommand.setDestinationPosY((short) 0); // 目标库位列
			crnCommand.setDestinationPosZ((short) 0); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, crnProtocol.getCrnNo(), new Task(2, crnCommand))) {
			News.error("堆垛机移动命令下发失败，堆垛机号={}，任务数据={}", crnProtocol.getCrnNo(), JSON.toJSON(crnCommand));
			}
			crnThread.setBackHpFlag(true);
			redisUtil.set(RedisConstantType.CRN_MOVE_LOCK + crn.getId(), "lock", 60);
			try {
			Thread.sleep(500);
			} catch (Exception e) {
			e.printStackTrace();
			}
			}
			}
			}

			/**
			* 入库 ===>> 堆垛机站到库位
			*/
			public synchronized void crnStnToLoc(CrnSlave slave, CrnProtocol crnProtocol,Integer mark) {
			News.warnNoLog(""+mark+" - 1"+" - 0"+" - 堆垛机入出库作业下发：执行入库");
			public synchronized void crnStnToLoc(CrnSlave slave, CrnProtocol crnProtocol, Integer mark) {
			News.warnNoLog("" + mark + " - 1" + " - 0" + " - 堆垛机入出库作业下发：执行入库");
			for (CrnSlave.CrnStn crnStn : slave.getCrnInStn()) {
			boolean flag = false;
			// 获取堆垛机入库站信息
			DevpThread devpThread = (DevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			News.infoNoLog(""+mark+" - 1"+" - 1"+" - 堆垛机入库站信息(staProtocol!=null继续执行)：staProtocol="+staProtocol);
			News.infoNoLog("" + mark + " - 1" + " - 1" + " - 堆垛机入库站信息(staProtocol!=null继续执行)：staProtocol=" + staProtocol);
			continue;
			} else {
			staProtocol = staProtocol.clone();
			@@ -697,7 +945,7 @@
			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			News.error(""+mark+" - 1"+" - 2"+" - 入库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			News.error("" + mark + " - 1" + " - 2" + " - 入库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			continue;
			}
			if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.getWorkNo() > 0 && staProtocol.isInEnable()
			@@ -705,27 +953,27 @@
			flag = true;
			}
			if (!flag) {
			News.errorNoLog(""+mark+" - 1"+" - 3"+" - 堆垛机入库站信息(以下需要全true):"
			+"自动信号"+staProtocol.isAutoing()+"有物信号"+staProtocol.isLoading()
			+"工作号>0"+staProtocol.getWorkNo()+"可入信号"+staProtocol.isInEnable()
			+"能入信号（wms设置）.equals(\"Y\")"+staDetl.getCanining());
			News.errorNoLog("" + mark + " - 1" + " - 3" + " - 堆垛机入库站信息(以下需要全true):"
			+ "自动信号" + staProtocol.isAutoing() + "有物信号" + staProtocol.isLoading()
			+ "工作号>0" + staProtocol.getWorkNo() + "可入信号" + staProtocol.isInEnable()
			+ "能入信号（wms设置）.equals(\"Y\")" + staDetl.getCanining());
			continue;
			}
			// 获取工作状态为2（设备上走）的入库工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep2(slave.getId(), staProtocol.getWorkNo().intValue(), crnStn.getStaNo());
			if (null == wrkMast) {
			News.infoNoLog(""+mark+" - 1"+" - 4"+" - 查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
			News.infoNoLog("" + mark + " - 1" + " - 4" + " - 查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
			// log.error("查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
			continue;
			}
			// 获取库位信息
			LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
			if (locMast == null) {
			News.error(""+mark+" - 1"+" - 5"+" - 查询库存无数据--库位号{}", wrkMast.getLocNo());
			News.error("" + mark + " - 1" + " - 5" + " - 查询库存无数据--库位号{}", wrkMast.getLocNo());
			continue;
			}
			if (!locMast.getLocSts().equals("S") && !locMast.getLocSts().equals("Q")) {
			News.error(""+mark+" - 1"+" - 6"+" - 入库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), locMast.getLocSts());
			News.error("" + mark + " - 1" + " - 6" + " - 入库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), locMast.getLocSts());
			continue;
			}

			@@ -745,37 +993,43 @@
			if (Utils.getLaneByLocNo(wrkMast.getLocNo()) != crnProtocol.getCrnLane()) {
			//判断堆垛机所在巷道是否存在其他任务，如存在则优先执行
			List<WrkMast> currentWrkMasts = wrkMastService.selectLaneWrkMast(crnProtocol.getCrnLane(), false);
			if (!currentWrkMasts.isEmpty()) {
			continue;//当前堆垛机所在巷道存在任务
			}
			// if (!currentWrkMasts.isEmpty()) {
			// continue;//当前堆垛机所在巷道存在任务
			// }
			}
			}

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getLocNo())) {
			News.warnNoLog(""+mark+" - 1"+" - 8"+" - 双深库位且浅库位有货，则需先对浅库位进行库位移转 : 开始执行任务号={}",wrkMast.getWrkNo());
			News.warnNoLog("" + mark + " - 1" + " - 8" + " - 双深库位且浅库位有货，则需先对浅库位进行库位移转 : 开始执行任务号={}", wrkMast.getWrkNo());
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			News.warnNoLog(""+mark+" - 1"+" - 9"+" - // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！库位状态={}",shallowLoc.getLocSts());
			News.warn("" + mark + " - 1" + " - 9" + " - // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！库位={},库位状态={}", shallowLoc.getLocNo(), shallowLoc.getLocSts());
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			News.error(""+mark+" - 1"+" - 10"+" - {}库位异常，未检索到相应工作档！", shallowLocNo);
			News.error("" + mark + " - 1" + " - 10" + " - {}库位异常，未检索到相应工作档！", shallowLocNo);
			} else {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			News.error(""+mark+" - 1"+" - 11"+" - 调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			if (waitWrkMast.getWrkSts() != 14 && waitWrkMast.getIoType() > 100) {
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			News.error("" + mark + " - 1" + " - 11" + " - 调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			}
			continue;

			if (waitWrkMast.getWrkSts() < 5 && waitWrkMast.getIoType() < 100) {
			continue;//有任务禁止搬运，有可能浅库位状态还未变更完成
			}
			}

			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			News.warnNoLog(""+mark+" - 1"+" - 12"+" - // F、D 库位状态={}",shallowLoc.getLocSts());
			News.warn("" + mark + " - 1" + " - 12" + " - // F、D 库位={},库位状态={}", shallowLoc.getLocNo(), shallowLoc.getLocSts());
			// 此标记避免多次执行移库任务
			if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())) {
			if (moveLocForDeepLoc(slave, shallowLoc,mark)){
			if (moveLocForDeepLoc(slave, shallowLoc, mark)) {
			wrkMast.setUpdMk("Y");
			wrkMast.setIoPri(14D);
			wrkMastMapper.updateById(wrkMast);
			@@ -790,17 +1044,17 @@
			}
			continue;
			} else if (shallowLoc.getLocSts().equals("Q")) {
			News.warnNoLog(""+mark+" - 1"+" - 13"+" - // Q 库位状态={}",shallowLoc.getLocSts());
			News.warn("" + mark + " - 1" + " - 13" + " - // Q 库位={},库位状态={}", shallowLoc.getLocNo(), shallowLoc.getLocSts());
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
			News.infoNoLog(""+mark+" - 1"+" - 14"+" - // F、D 工作状态(判断条件为==4)={}",waitWrkMast.getWrkSts());
			News.infoNoLog("" + mark + " - 1" + " - 14" + " - // F、D 工作状态(判断条件为==4)={}", waitWrkMast.getWrkSts());
			continue;
			}
			}
			}
			News.warnNoLog(""+mark+" - 1"+" - 15"+" - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}",wrkMast.getWrkNo().shortValue()
			,crnStn.getRow().shortValue(),crnStn.getBay().shortValue(),crnStn.getLev().shortValue()
			,locMast.getRow1().shortValue(),locMast.getBay1().shortValue(),locMast.getLev1().shortValue());
			News.info("" + mark + " - 1" + " - 15" + " - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}", wrkMast.getWrkNo().shortValue()
			, crnStn.getRow().shortValue(), crnStn.getBay().shortValue(), crnStn.getLev().shortValue()
			, locMast.getRow1().shortValue(), locMast.getBay1().shortValue(), locMast.getLev1().shortValue());

			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			@@ -815,7 +1069,7 @@
			crnCommand.setDestinationPosY(locMast.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(locMast.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			News.error(""+mark+" - 1"+" - 16"+" - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			News.error("" + mark + " - 1" + " - 16" + " - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {

			// long startTime = System.currentTimeMillis();
			@@ -836,19 +1090,40 @@
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 1"+" - 17"+" - 修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error("" + mark + " - 1" + " - 17" + " - 修改工作档状态 2.设备上走 => 3.吊车入库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}
			}
			News.infoNoLog(""+mark+" - 1"+" - 0"+" - 堆垛机入出库作业下发：入库执行完毕");
			News.infoNoLog("" + mark + " - 1" + " - 0" + " - 堆垛机入出库作业下发：入库执行完毕");
			}

			/**
			* 出库 ===>> 库位到堆垛机站
			* 2022-06-09 TQS修改，查询工作档LIST，遍历下发，防止第一个任务堵塞出库
			*/
			public synchronized void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol,Integer mark) {
			News.warnNoLog(""+mark+" - 2"+" - 0"+" - 堆垛机入出库作业下发：执行出库");
			public synchronized void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol, Integer mark) {
			News.warnNoLog("" + mark + " - 2" + " - 0" + " - 堆垛机入出库作业下发：执行出库");

			int devpTaskStackOver = 20;
			Config config = configService.selectOne(new EntityWrapper<Config>()
			.eq("code", "devpTaskStackOver"));
			if (config != null) {
			devpTaskStackOver = Integer.parseInt(config.getValue());
			}
			int devpCheckTaskStackOver = 2;
			Config config2 = configService.selectOne(new EntityWrapper<Config>()
			.eq("code", "devpCheckTaskStackOver"));
			if (config2 != null) {
			devpCheckTaskStackOver = Integer.parseInt(config2.getValue());
			}


			Integer devpWorkingCount = commonService.queryDevpWorkingCount();
			if (devpWorkingCount > devpTaskStackOver) {
			News.warn("" + mark + " - 2" + " - 0" + " - 输送线任务过载，当前输送线承载数量:{}", devpWorkingCount);
			return;
			}

			for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
			// 获取工作状态为11（生成出库ID）的出库工作档
			// WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
			@@ -859,20 +1134,20 @@
			}
			// 工作档状态判断
			if (wrkMast.getIoType() < 100 \|\| wrkMast.getSourceStaNo() == null) {
			News.error(""+mark+" - 2"+" - 1"+" - 查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			News.error("" + mark + " - 2" + " - 1" + " - 查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
			continue;
			}
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (!sourceSta.getLocSts().equals("R") && !sourceSta.getLocSts().equals("P")) {
			News.error(""+mark+" - 2"+" - 2"+" - 出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			News.error("" + mark + " - 2" + " - 2" + " - 出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
			continue;
			}
			// 获取堆垛机出库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
			StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
			if (staProtocol == null) {
			News.infoNoLog(""+mark+" - 2"+" - 3"+" - 堆垛机出库站信息(staProtocol!=null继续执行,否则循环终止)：staProtocol="+staProtocol);
			News.infoNoLog("" + mark + " - 2" + " - 3" + " - 堆垛机出库站信息(staProtocol!=null继续执行,否则循环终止)：staProtocol=" + staProtocol);
			break;
			// continue;
			} else {
			@@ -891,6 +1166,29 @@
			}
			}

			//zhangc
			if (wrkMast.getIoType() == 103 \|\| wrkMast.getIoType() == 107) {
			if (wrkMast.getStaNo() == 1058) {
			List<WrkMast> inWrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
			.in("wrk_sts", 12, 14)
			.eq("sta_no", 1058)
			);
			if (!Cools.isEmpty(inWrkMasts) && inWrkMasts.size() >= devpCheckTaskStackOver) {
			News.error("" + mark + " - 2" + " - 检测存在1058站点，存在两笔工作中的任务，工作号={}" + wrkMast.getWrkNo());
			continue;
			}
			} else if (wrkMast.getStaNo() == 1062) {
			List<WrkMast> inWrkMasts = wrkMastService.selectList(new EntityWrapper<WrkMast>()
			.in("wrk_sts", 12, 14)
			.eq("sta_no", 1062)
			);
			if (!Cools.isEmpty(inWrkMasts) && inWrkMasts.size() >= devpCheckTaskStackOver) {
			News.error("" + mark + " - 2" + " - 检测存在1062站点，存在两笔工作中的任务，工作号={}" + wrkMast.getWrkNo());
			continue;
			}
			}
			}

			// // 入出库模式判断
			// if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
			// if (wrkMast.getStaNo() == 204 && devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
			@@ -901,13 +1199,29 @@
			// 查询站点详细信息
			BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
			if (staDetl == null) {
			News.error(""+mark+" - 2"+" - 5"+" - 出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			News.error("" + mark + " - 2" + " - 5" + " - 出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
			break;
			// continue;
			}
			// 判断堆垛机出库站状态
			if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() != null && staDetl.getCanouting().equals("Y")
			&& staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
			&& staProtocol.getWorkNo() == 0) {

			//根据参数判断是否校验可出信号
			String crnOutVerifyOut = "Y";
			Config crnOutVerifyOutEnableConfig = configService.selectOne(new EntityWrapper<Config>()
			.eq("code", "crnOutVerifyOutEnable"));
			if (crnOutVerifyOutEnableConfig != null) {
			crnOutVerifyOut = crnOutVerifyOutEnableConfig.getValue();
			}

			if (crnOutVerifyOut.equals("Y")) {
			if (!staProtocol.isOutEnable()) {
			continue;
			}
			}


			// 命令下发区 --------------------------------------------------------------------------

			// 堆垛机控制过滤
			@@ -918,7 +1232,7 @@

			if (crnProtocol.getCrnNo() == 1) {
			//判断堆垛机和当前任务是否处于一个巷道
			if (Utils.getLaneByLocNo(wrkMast.getLocNo()) != crnProtocol.getCrnLane()) {
			if (Utils.getLaneByLocNo(wrkMast.getSourceLocNo()) != crnProtocol.getCrnLane()) {
			//判断堆垛机所在巷道是否存在其他任务，如存在则优先执行
			List<WrkMast> currentWrkMasts = wrkMastService.selectLaneWrkMast(crnProtocol.getCrnLane(), false);
			if (!currentWrkMasts.isEmpty()) {
			@@ -929,12 +1243,12 @@

			// 双深库位且浅库位有货，则需先对浅库位进行库位移转
			if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
			News.warnNoLog(""+mark+" - 2"+" - 6"+" - 双深库位且浅库位有货，则需先对浅库位进行库位移转 : 开始执行任务号={}",wrkMast.getWrkNo());
			News.warnNoLog("" + mark + " - 2" + " - 6" + " - 双深库位且浅库位有货，则需先对浅库位进行库位移转 : 开始执行任务号={}", wrkMast.getWrkNo());
			String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
			LocMast shallowLoc = locMastService.selectById(shallowLocNo);
			// O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！
			if (shallowLoc.getLocSts().equals("P") \|\| shallowLoc.getLocSts().equals("R")) {
			News.warnNoLog(""+mark+" - 2"+" - 7"+" - // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！库位状态={}",shallowLoc.getLocSts());
			News.warnNoLog("" + mark + " - 2" + " - 7" + " - // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用直接搬！库位={},库位状态={}", shallowLoc.getLocNo(), shallowLoc.getLocSts());
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			if (null == waitWrkMast) {
			News.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
			@@ -943,7 +1257,7 @@
			waitWrkMast.setIoPri(15D);
			waitWrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(waitWrkMast) == 0) {
			News.error(""+mark+" - 2"+" - 8"+" - 调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			News.error("" + mark + " - 2" + " - 8" + " - 调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
			}
			continue;
			} else {
			@@ -951,7 +1265,7 @@
			}
			}
			} else if (shallowLoc.getLocSts().equals("F") \|\| shallowLoc.getLocSts().equals("D")) {
			News.warnNoLog(""+mark+" - 2"+" - 9"+" - // F、D 库位状态={}",shallowLoc.getLocSts());
			News.warnNoLog("" + mark + " - 2" + " - 9" + " - // F、D 库位={},库位状态={}", shallowLoc.getLocNo(), shallowLoc.getLocSts());
			// WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
			//2022-08-16 modify,不根据updmk标记移库任务(容易被取消导致堵塞)，查询工作档是否存在任务
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			@@ -959,7 +1273,7 @@
			// if (Cools.isEmpty(wrkMast.getUpdMk()) \|\| "N".equals(wrkMast.getUpdMk())
			// \|\| Cools.isEmpty(waitWrkMast)) {
			if (Cools.isEmpty(waitWrkMast)) {
			if (moveLocForDeepLoc(slave, shallowLoc,mark)){
			if (moveLocForDeepLoc(slave, shallowLoc, mark)) {
			wrkMast.setUpdMk("Y");
			// wrkMast.setIoPri(14D);
			wrkMastMapper.updateById(wrkMast);
			@@ -972,10 +1286,10 @@
			News.error("{}任务出库失败，浅库位堵塞！浅库位号:{}", wrkMast.getWrkNo(), shallowLocNo);
			continue;
			} else if (shallowLoc.getLocSts().equals("Q") \|\| shallowLoc.getLocSts().equals("S")) {
			News.warnNoLog(""+mark+" - 2"+" - 10"+" - // Q、S 库位状态={}",shallowLoc.getLocSts());
			News.warnNoLog("" + mark + " - 2" + " - 10" + " - // Q、S 库位={},库位状态={}", shallowLoc.getLocNo(), shallowLoc.getLocSts());
			WrkMast waitWrkMast = wrkMastMapper.selectByLocNo1(shallowLocNo);
			if (null != waitWrkMast && waitWrkMast.getWrkSts() == 4) {
			News.infoNoLog(""+mark+" - 2"+" - 11"+" - // F、D 工作状态(判断条件为==4)={}",waitWrkMast.getWrkSts());
			News.infoNoLog("" + mark + " - 2" + " - 11" + " - // F、D 工作状态(判断条件为==4)={}", waitWrkMast.getWrkSts());
			continue;
			}
			}
			@@ -987,9 +1301,9 @@
			// return;
			}

			News.warnNoLog(""+mark+" - 2"+" - 12"+" - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}",wrkMast.getWrkNo().shortValue()
			,sourceSta.getRow1().shortValue(),sourceSta.getBay1().shortValue(),sourceSta.getLev1().shortValue()
			,crnStn.getRow().shortValue(),crnStn.getBay().shortValue(),crnStn.getLev().shortValue());
			News.warnNoLog("" + mark + " - 2" + " - 12" + " - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}", wrkMast.getWrkNo().shortValue()
			, sourceSta.getRow1().shortValue(), sourceSta.getBay1().shortValue(), sourceSta.getLev1().shortValue()
			, crnStn.getRow().shortValue(), crnStn.getBay().shortValue(), crnStn.getLev().shortValue());

			// 1.堆垛机开始移动
			CrnCommand crnCommand = new CrnCommand();
			@@ -1004,7 +1318,7 @@
			crnCommand.setDestinationPosY(crnStn.getBay().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(crnStn.getLev().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			News.error(""+mark+" - 2"+" - 13"+" - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			News.error("" + mark + " - 2" + " - 13" + " - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			@@ -1012,14 +1326,14 @@
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 2"+" - 14"+" - 修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error("" + mark + " - 2" + " - 14" + " - 修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			break;
			}
			}
			}
			}
			News.infoNoLog(""+mark+" - 2"+" - 0"+" - 堆垛机入出库作业下发：出库执行完毕");
			News.infoNoLog("" + mark + " - 2" + " - 0" + " - 堆垛机入出库作业下发：出库执行完毕");
			}

			// /**
			@@ -1142,17 +1456,17 @@
			/**
			* 库位移转
			*/
			public synchronized void locToLoc(CrnSlave slave, CrnProtocol crnProtocol,Integer mark) {
			public synchronized void locToLoc(CrnSlave slave, CrnProtocol crnProtocol, Integer mark) {
			// 获取工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove(slave.getId());
			if (null == wrkMast) {
			return;
			}
			News.warnNoLog(""+mark+" - 3"+" - 0"+" - 堆垛机入出库作业下发：执行库位移转");
			News.warnNoLog("" + mark + " - 3" + " - 0" + " - 堆垛机入出库作业下发：执行库位移转");
			// 获取源库位信息
			LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
			if (null == sourceSta) {
			News.error(""+mark+" - 3"+" - 1"+" - 工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			News.error("" + mark + " - 3" + " - 1" + " - 工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			return;
			}
			// 源库位库位状态判断
			@@ -1162,7 +1476,7 @@
			// 获取目标库位信息
			LocMast sta = locMastService.selectById(wrkMast.getLocNo());
			if (null == sta) {
			News.error(""+mark+" - 3"+" - 2"+" - 工作档库位移转失败，原因：检索目标库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			News.error("" + mark + " - 3" + " - 2" + " - 工作档库位移转失败，原因：检索目标库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			return;
			}
			// 获取堆垛机信息并判断是否可入出
			@@ -1181,9 +1495,9 @@
			return;
			}

			News.warnNoLog(""+mark+" - 3"+" - 3"+" - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}",wrkMast.getWrkNo().shortValue()
			,sourceSta.getRow1().shortValue(),sourceSta.getBay1().shortValue(),sourceSta.getLev1().shortValue()
			,sta.getRow1().shortValue(),sta.getBay1().shortValue(),sta.getLev1().shortValue());
			News.warnNoLog("" + mark + " - 3" + " - 3" + " - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}", wrkMast.getWrkNo().shortValue()
			, sourceSta.getRow1().shortValue(), sourceSta.getBay1().shortValue(), sourceSta.getLev1().shortValue()
			, sta.getRow1().shortValue(), sta.getBay1().shortValue(), sta.getLev1().shortValue());

			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			@@ -1198,7 +1512,7 @@
			crnCommand.setDestinationPosY(sta.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(sta.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			News.error(""+mark+" - 3"+" - 4"+" - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			News.error("" + mark + " - 3" + " - 4" + " - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			@@ -1206,36 +1520,36 @@
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 3"+" - 5"+" - 【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error("" + mark + " - 3" + " - 5" + " - 【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}
			News.infoNoLog(""+mark+" - 3"+" - 0"+" - 堆垛机入出库作业下发：库位移转完成");
			News.infoNoLog("" + mark + " - 3" + " - 0" + " - 堆垛机入出库作业下发：库位移转完成");

			}

			/**
			* 库位移转
			*/
			public synchronized void locToLoc111(CrnSlave slave, CrnProtocol crnProtocol,Integer mark) {
			public synchronized void locToLoc111(CrnSlave slave, CrnProtocol crnProtocol, Integer mark) {
			// 获取工作档信息
			WrkMast wrkMast = wrkMastMapper.selectLocMove111(slave.getId());
			if (null == wrkMast) {
			return;
			}
			News.warnNoLog(""+mark+" - 3"+" - 0"+" - 堆垛机入出库作业下发：执行库位移转");
			News.warnNoLog("" + mark + " - 3" + " - 0" + " - 堆垛机入出库作业下发：执行库位移转");
			// 获取源库位信息
			LocMast sourceLoc = locMastService.selectById(wrkMast.getSourceLocNo());
			if (null == sourceLoc) {
			News.error(""+mark+" - 3"+" - 1"+" - 工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			News.error("" + mark + " - 3" + " - 1" + " - 工作档库位移转失败，原因：检索源库位失败！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			return;
			}
			// 源库位库位状态判断
			if (!sourceLoc.getLocSts().equals("R")) {
			News.error(""+mark+" - 3"+" - 11"+" - 工作档库位移转失败，原因：源库位状态不为R！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			News.error("" + mark + " - 3" + " - 11" + " - 工作档库位移转失败，原因：源库位状态不为R！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo());
			return;
			}

			if(wrkMast.getIoType() != 111) {
			if (wrkMast.getIoType() != 111) {
			// 获取目标库位信息
			LocMast loc = locMastService.selectById(wrkMast.getLocNo());
			if (null == loc) {
			@@ -1244,7 +1558,7 @@
			}
			// 源库位库位状态判断
			if (!loc.getLocSts().equals("S")) {
			News.error(""+mark+" - 3"+" - 21"+" - 工作档库位移转失败，原因：目标库位状态不为R！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			News.error("" + mark + " - 3" + " - 21" + " - 工作档库位移转失败，原因：目标库位状态不为R！工作号={}，源库位={}", wrkMast.getWrkNo(), wrkMast.getLocNo());
			return;
			}
			}
			@@ -1264,9 +1578,9 @@
			return;
			}

			News.warnNoLog(""+mark+" - 3"+" - 3"+" - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}",wrkMast.getWrkNo().shortValue()
			,sourceLoc.getRow1().shortValue(),sourceLoc.getBay1().shortValue(),sourceLoc.getLev1().shortValue()
			,sourceLoc.getRow1().shortValue(),sourceLoc.getBay1().shortValue(),sourceLoc.getLev1().shortValue());
			News.warnNoLog("" + mark + " - 3" + " - 3" + " - 命令下发 : 工作号={},源排={},源列={},源层={},目标排={},目标列={},目标层={}", wrkMast.getWrkNo().shortValue()
			, sourceLoc.getRow1().shortValue(), sourceLoc.getBay1().shortValue(), sourceLoc.getLev1().shortValue()
			, sourceLoc.getRow1().shortValue(), sourceLoc.getBay1().shortValue(), sourceLoc.getLev1().shortValue());

			// 命令下发区 --------------------------------------------------------------------------
			CrnCommand crnCommand = new CrnCommand();
			@@ -1281,7 +1595,7 @@
			crnCommand.setDestinationPosY(sourceLoc.getBay1().shortValue()); // 目标库位列
			crnCommand.setDestinationPosZ(sourceLoc.getLev1().shortValue()); // 目标库位层
			if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
			News.error(""+mark+" - 3"+" - 4"+" - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			News.error("" + mark + " - 3" + " - 4" + " - 堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
			} else {
			// 修改工作档状态 11.生成出库ID => 12.吊车出库中
			Date now = new Date();
			@@ -1289,10 +1603,10 @@
			wrkMast.setCrnStrTime(now);
			wrkMast.setModiTime(now);
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.error(""+mark+" - 3"+" - 5"+" - 【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			News.error("" + mark + " - 3" + " - 5" + " - 【库位移转】修改工作档状态 11.生成出库ID => 12.吊车出库中失败！！，工作号={}", wrkMast.getWrkNo());
			}
			}
			News.infoNoLog(""+mark+" - 3"+" - 0"+" - 堆垛机入出库作业下发：库位移转完成");
			News.infoNoLog("" + mark + " - 3" + " - 0" + " - 堆垛机入出库作业下发：库位移转完成");

			}

			@@ -1309,7 +1623,7 @@
			}
			// 状态：等待确认并且任务完成位 = 1
			if (crnProtocol.statusType == CrnStatusType.WAITING && crnProtocol.getTaskNo() != 0) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行对工作档的完成操作");
			News.warnNoLog("" + mark + " - 0" + " - 开始执行对工作档的完成操作");
			if (crnProtocol.getTaskNo() == 9999) {
			// 堆垛机复位
			crnThread.setResetFlag(true);
			@@ -1317,11 +1631,11 @@
			// 获取入库待确认工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(crnProtocol.getTaskNo().intValue());
			if (wrkMast == null) {
			News.error(""+mark+" - 1"+" - 堆垛机处于等待确认且任务完成状态，但未找到工作档。堆垛机号={}，工作号={}", crn.getId(), crnProtocol.getTaskNo());
			News.error("" + mark + " - 1" + " - 堆垛机处于等待确认且任务完成状态，但未找到工作档。堆垛机号={}，工作号={}", crn.getId(), crnProtocol.getTaskNo());
			continue;
			}
			// 入库 + 库位转移 ==> 4.入库完成
			if (wrkMast.getWrkSts() == 3 \|\| (wrkMast.getWrkSts() == 12 && (wrkMast.getIoType() == 11 \|\| wrkMast.getIoType()==111))) {
			if (wrkMast.getWrkSts() == 3 \|\| (wrkMast.getWrkSts() == 12 && (wrkMast.getIoType() == 11 \|\| wrkMast.getIoType() == 111))) {
			wrkMast.setWrkSts(4L);
			} else {
			continue;
			@@ -1332,14 +1646,14 @@
			// 修改成功后复位堆垛机
			if (wrkMastMapper.updateById(wrkMast) > 0) {
			// 堆垛机复位
			News.warnNoLog(""+mark+" - 2"+" - 修改成功后复位堆垛机 : 堆垛机号={}",crnThread.getCrnProtocol().getCrnNo());
			News.warnNoLog("" + mark + " - 2" + " - 修改成功后复位堆垛机 : 堆垛机号={}", crnThread.getCrnProtocol().getCrnNo());
			crnThread.setResetFlag(true);
			}
			}

			}
			}
			News.infoNoLog(""+mark+" - 0"+" - 对工作档的完成操作执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 对工作档的完成操作执行完成");
			}

			/**
			@@ -1362,7 +1676,7 @@
			BasErrLog latest = basErrLogService.findLatestByTaskNo(crn.getId(), crnProtocol.getTaskNo().intValue());
			// 有异常
			if (latest == null) {
			News.warnNoLog(""+mark+" - 1"+" - 开始执行：堆垛机异常信息记录：有任务，有异常");
			News.warnNoLog("" + mark + " - 1" + " - 开始执行：堆垛机异常信息记录：有任务，有异常");
			if (crnProtocol.getAlarm() != null && crnProtocol.getAlarm() > 0) {
			WrkMast wrkMast = wrkMastMapper.selectById(crnProtocol.getTaskNo());
			if (wrkMast == null) {
			@@ -1394,7 +1708,7 @@
			"任务中异常" // 备注
			);
			if (!basErrLogService.insert(basErrLog)) {
			News.error(""+mark+" - 2"+" - 堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			News.error("" + mark + " - 2" + " - 堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			}
			}
			} else {
			@@ -1404,7 +1718,7 @@
			latest.setUpdateTime(now);
			latest.setStatus(2);
			if (!basErrLogService.updateById(latest)) {
			News.error(""+mark+" - 3"+" - 堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			News.error("" + mark + " - 3" + " - 堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			}
			}
			}
			@@ -1413,7 +1727,7 @@
			BasErrLog latest = basErrLogService.findLatest(crn.getId());
			// 有异常
			if (crnProtocol.getAlarm() != null && crnProtocol.getAlarm() > 0) {
			News.warnNoLog(""+mark+" - 4"+" - 开始执行：堆垛机异常信息记录：无任务，有异常");
			News.warnNoLog("" + mark + " - 4" + " - 开始执行：堆垛机异常信息记录：无任务，有异常");
			// 记录新异常
			if (latest == null \|\| (latest.getErrCode() != crnProtocol.getAlarm().intValue())) {
			BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm());
			@@ -1442,7 +1756,7 @@
			"无任务异常" // 备注
			);
			if (!basErrLogService.insert(basErrLog)) {
			News.error(""+mark+" - 5"+" - 堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			News.error("" + mark + " - 5" + " - 堆垛机plc异常记录失败 ===>> [id:{}] [error:{}]", crn.getId(), errName);
			}
			}
			// 无异常
			@@ -1453,7 +1767,7 @@
			latest.setUpdateTime(now);
			latest.setStatus(2);
			if (!basErrLogService.updateById(latest)) {
			News.error(""+mark+" - 6"+" - 堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			News.error("" + mark + " - 6" + " - 堆垛机plc异常记录修复失败 ===>> [id:{}] [errLogId:{}]", crn.getId(), latest.getId());
			}
			}
			}
			@@ -1461,7 +1775,7 @@
			}

			}
			News.infoNoLog(""+mark+" - 0"+" - 堆垛机异常信息记录执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 堆垛机异常信息记录执行完成");
			}


			@@ -1485,11 +1799,17 @@
			}

			LedThread ledThread = null;
			if (!Cools.isEmpty(emptyInSta.getLed())) {
			if (!Cools.isEmpty(emptyInSta.getLed())) {
			ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, emptyInSta.getLed());
			}

			if (!staProtocol.isLoading()){
			if (!staProtocol.isLoading()) {
			continue;
			}

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, emptyInSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}

			@@ -1498,8 +1818,32 @@
			&& staProtocol.isInEnable()
			&& staProtocol.isEmptyMk()
			&& (staProtocol.getWorkNo() > 9990 && staProtocol.getWorkNo() <= 9999)
			&& staProtocol.isPakMk()) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行：空栈板初始化入库,叉车入库站放货");
			&& staProtocol.isPakMk()
			&& staProtocol.getEmptyInType() == 1
			) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行：空栈板初始化入库,叉车入库站放货");

			String barcode = barcodeThread.getBarcode();
			if (!Cools.isEmpty(barcode)) {
			News.info("" + mark + " - 1" + " - {}号条码扫描器检测条码信息：{}", emptyInSta.getBarcode(), barcode);
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode)) {
			News.info("" + mark + " - 2" + " - 扫码失败1 ===>> {}号条码扫描器检测条码信息：{},站点:{}", emptyInSta.getBarcode(), barcode, emptyInSta.getStaNo());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(5, errorMsg));
			}
			continue;
			}
			} else {
			News.info("" + mark + " - 3" + " - 扫码失败2 ===>> {}号条码扫描器检测条码信息：{},站点:{}", emptyInSta.getBarcode(), barcode, emptyInSta.getStaNo());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(5, errorMsg));
			}
			continue;
			}

			try {
			LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
			@@ -1508,6 +1852,7 @@
			param.setIoType(10);
			param.setSourceStaNo(emptyInSta.getStaNo());
			param.setLocType1(locTypeDto.getLocType1());
			param.setBarcode(barcode);
			String response = new HttpHandler.Builder()
			.setUri(wmsUrl)
			.setPath("/rpc/pakin/loc/v1")
			@@ -1524,55 +1869,137 @@
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.errorNoLog(""+mark+" - 1"+" - 更新plc站点信息失败");
			News.errorNoLog("" + mark + " - 1" + " - 更新plc站点信息失败");
			throw new CoolException("更新plc站点信息失败");
			}

			if (ledThread != null) {
			// 命令集合
			List<LedCommand> commands = new ArrayList<>();
			// 组装命令
			LedCommand ledCommand = new LedCommand();
			ledCommand.setWorkNo(dto.getWorkNo());
			ledCommand.setIoType(1);
			ledCommand.setTitle("全板入库");
			ledCommand.setLocNo(dto.getLocNo());
			ledCommand.setStaNo(dto.getStaNo());
			commands.add(ledCommand);
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(3, commands));
			// ledThread.errorReset();
			}
			} else {
			staProtocol.setWorkNo((short)9992);
			staProtocol.setStaNo(emptyInSta.getBackSta().shortValue());
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.errorNoLog(""+mark+" - 2"+" - 更新plc站点信息失败");
			throw new CoolException("更新plc站点信息失败");
			}

			if (ledThread != null) {
			String errorMsg = jsonObject.getString("msg");
			if (!Cools.isEmpty(errorMsg)) {
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(5, errorMsg));
			}
			}
			News.error(""+mark+" - 3"+" - 请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			News.error("" + mark + " - 3" + " - 请求接口失败！！！url：{}；request：{}；response：{}", wmsUrl + "/rpc/pakin/loc/v1", JSON.toJSONString(param), response);
			}
			} catch (Exception e) {
			e.printStackTrace();
			TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}

			} else {
			News.errorNoLog(""+mark+" - 4"+" - 站点信息不符合入库条件！！！"+" 自动信号："+staProtocol.isAutoing()+"、可入信号：" + staProtocol.isInEnable()
			+"、空板信号："+ staProtocol.isEmptyMk()+"、工作号：" + staProtocol.getWorkNo()
			+"、锁定标记"+ staProtocol.isPakMk());
			News.errorNoLog("" + mark + " - 4" + " - 站点信息不符合入库条件！！！" + " 自动信号：" + staProtocol.isAutoing() + "、可入信号：" + staProtocol.isInEnable()
			+ "、空板信号：" + staProtocol.isEmptyMk() + "、工作号：" + staProtocol.getWorkNo()
			+ "、锁定标记" + staProtocol.isPakMk());
			}
			}
			}
			News.infoNoLog(""+mark+" - 0"+" - 空栈板初始化入库,叉车入库站放货执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 空栈板初始化入库,叉车入库站放货执行完成");
			}

			/**
			* 空托盘入库-产线
			*/
			public synchronized void storeEmptyPltLine(Integer mark) {
			for (DevpSlave devp : slaveProperties.getDevp()) {
			// 遍历空板入库口
			for (DevpSlave.Sta emptyInSta : devp.getEmptyInSta()) {
			// 获取空板入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
			StaProtocol staProtocol = devpThread.getStation().get(emptyInSta.getStaNo());
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			LedThread ledThread = null;
			if (!Cools.isEmpty(emptyInSta.getLed())) {
			ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, emptyInSta.getLed());
			}

			if (!staProtocol.isLoading()) {
			continue;
			}

			// 获取条码扫描仪信息
			BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, emptyInSta.getBarcode());
			if (barcodeThread == null) {
			continue;
			}

			// 站点条件判断
			if (staProtocol.isAutoing()
			&& staProtocol.isInEnable()
			&& staProtocol.isEmptyMk()
			&& (staProtocol.getWorkNo() > 9990 && staProtocol.getWorkNo() <= 9999)
			&& staProtocol.isPakMk()
			&& staProtocol.getEmptyInType() == 2
			) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行：空栈板初始化入库,叉车入库站放货");

			String barcode = barcodeThread.getBarcode();
			if (!Cools.isEmpty(barcode)) {
			News.info("" + mark + " - 1" + " - {}号条码扫描器检测条码信息：{}", emptyInSta.getBarcode(), barcode);
			if ("NG".endsWith(barcode) \|\| "NoRead".equals(barcode) \|\| "empty".equals(barcode)) {
			News.info("" + mark + " - 2" + " - 扫码失败1 ===>> {}号条码扫描器检测条码信息：{},站点:{}", emptyInSta.getBarcode(), barcode, emptyInSta.getStaNo());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(5, errorMsg));
			}
			continue;
			}
			} else {
			News.info("" + mark + " - 3" + " - 扫码失败2 ===>> {}号条码扫描器检测条码信息：{},站点:{}", emptyInSta.getBarcode(), barcode, emptyInSta.getStaNo());
			// led 异常显示
			if (ledThread != null) {
			String errorMsg = "扫码失败，请重试";
			MessageQueue.offer(SlaveType.Led, emptyInSta.getLed(), new Task(5, errorMsg));
			}
			continue;
			}

			WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>()
			.eq("barcode", barcode)
			);
			if (wrkMast != null) {
			continue;
			}

			int workNo = commonService.getWorkNo(3);
			// 生成工作档
			WrkMast wrkMast1 = new WrkMast();
			wrkMast1.setWrkNo(workNo);
			wrkMast1.setIoTime(new Date());
			wrkMast1.setWrkSts(2L); // 工作状态：设备上走
			wrkMast1.setIoType(3); // 入出库状态：3.站到站
			wrkMast1.setIoPri(13D); // 优先级
			wrkMast1.setSourceStaNo(emptyInSta.getStaNo());
			wrkMast1.setStaNo(1007);
			wrkMast1.setBarcode(barcode);
			// 操作人员数据
			wrkMast1.setAppeTime(new Date());
			wrkMast1.setModiTime(new Date());
			boolean res = wrkMastService.insert(wrkMast1);
			if (!res) {
			throw new CoolException("保存工作档失败");
			}

			// 更新站点信息且下发plc命令
			staProtocol.setWorkNo((short) workNo);
			staProtocol.setStaNo((short) 2003);
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
			if (!result) {
			News.errorNoLog("" + mark + " - 1" + " - 更新plc站点信息失败");
			throw new CoolException("更新plc站点信息失败");
			}
			} else {
			News.errorNoLog("" + mark + " - 4" + " - 站点信息不符合入库条件！！！" + " 自动信号：" + staProtocol.isAutoing() + "、可入信号：" + staProtocol.isInEnable()
			+ "、空板信号：" + staProtocol.isEmptyMk() + "、工作号：" + staProtocol.getWorkNo()
			+ "、锁定标记" + staProtocol.isPakMk());
			}
			}
			}
			News.infoNoLog("" + mark + " - 0" + " - 空栈板初始化入库,叉车入库站放货执行完成");
			}

			/**
			@@ -1601,7 +2028,7 @@
			if (null == wrkMast) {
			continue;
			}
			News.warnNoLog(""+mark+" - 0"+" - 开始执行:出库 ===>> 工作档信息写入led显示器");
			News.warnNoLog("" + mark + " - 0" + " - 开始执行:出库 ===>> 工作档信息写入led显示器");
			wrkMasts.add(wrkMast);
			// 组装命令
			LedCommand ledCommand = new LedCommand();
			@@ -1641,12 +2068,13 @@
			ledCommand.setTitle("并板入库");
			break;
			default:
			News.error(""+mark+" - 1"+" - 任务入出库类型错误！！！[工作号：{}] [入出库类型：{}]", wrkMast.getWrkNo(), wrkMast.getIoType());
			News.error("" + mark + " - 1" + " - 任务入出库类型错误！！！[工作号：{}] [入出库类型：{}]", wrkMast.getWrkNo(), wrkMast.getIoType());
			break;
			}
			ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
			ledCommand.setLocNo(wrkMast.getLocNo());
			ledCommand.setStaNo(wrkMast.getStaNo());
			ledCommand.setBarcode(wrkMast.getBarcode());
			// ledCommand.setSourceStaNo(wrkMast.getSourceStaNo());
			if (wrkMast.getIoType() != 110 && wrkMast.getIoType() != 10) {
			List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
			@@ -1664,7 +2092,22 @@
			// }catch (Exception e){
			// log.error("工作档案明细输入电视机失败1：异常信息==》"+e);
			// }
			wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getAnfme(),wrkDetl.getWeight(),wrkDetl.getSpecs(),wrkDetl.getSku())));
			wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(
			wrkDetl.getMatnr()
			, wrkDetl.getMaktx()
			, wrkDetl.getAnfme()
			, wrkDetl.getWeight()
			, wrkDetl.getStockNum()
			, wrkDetl.getStockNum2()
			, wrkDetl.getSpecs()
			, wrkDetl.getSku()
			, wrkDetl.getZpallet()
			, wrkDetl.getModel()
			, wrkDetl.getSupp()
			, wrkDetl.getKpCstmrName()
			, wrkDetl.getOrderNo()
			, wrkDetl.getCstateid$()
			)));
			}
			commands.add(ledCommand);
			}
			@@ -1699,7 +2142,7 @@
			if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(3, commands))) {
			News.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			continue;
			}else {
			} else {
			ledThread.setLedMk(false);
			}
			}
			@@ -1710,7 +2153,7 @@
			wrkMast.setOveMk("Y");
			wrkMast.setModiTime(new Date());
			if (wrkMastMapper.updateById(wrkMast) == 0) {
			News.errorNoLog(""+mark+" - 4"+" - 更新工作档失败");
			News.errorNoLog("" + mark + " - 4" + " - 更新工作档失败");
			throw new CoolException("更新工作档失败");
			}
			}
			@@ -1724,7 +2167,7 @@
			}

			}
			News.infoNoLog(""+mark+" - 0"+" - 出库 ===>> 工作档信息写入led显示器执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 出库 ===>> 工作档信息写入led显示器执行完成");
			}

			/**
			@@ -1732,7 +2175,7 @@
			*/
			public synchronized void ledReset(Integer mark) {

			News.warnNoLog(""+mark+" - 0"+" - 开始执行:其他 ===>> LED显示器复位，显示默认信息");
			News.warnNoLog("" + mark + " - 0" + " - 开始执行:其他 ===>> LED显示器复位，显示默认信息");
			for (LedSlave led : slaveProperties.getLed()) {

			// 获取输送线plc线程
			@@ -1756,13 +2199,13 @@
			if (reset && !ledThread.isLedMk()) {
			ledThread.setLedMk(true);
			if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(4, new ArrayList<>()))) {
			News.error(""+mark+" - 1"+" - {}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			News.error("" + mark + " - 1" + " - {}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
			} else {

			}
			}
			}
			News.infoNoLog(""+mark+" - 0"+" - 执行完成：其他 ===>> LED显示器复位，显示默认信息");
			News.infoNoLog("" + mark + " - 0" + " - 执行完成：其他 ===>> LED显示器复位，显示默认信息");
			}

			/**
			@@ -1804,10 +2247,11 @@
			List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.sync(locDetl);
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(now);
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			// VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(now);
			wrkDetl.setModiTime(now);
			if (!wrkDetlService.insert(wrkDetl)) {
			@@ -1845,10 +2289,10 @@
			* 因双深库位阻塞，对浅库位进行移转（立即执行版)
			* tip：同步
			*/
			private synchronized boolean moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc,Integer mark) {
			private synchronized boolean moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc, Integer mark) {

			try {
			News.warnNoLog(""+mark+"moveLocForDeepLoc"+" - 0"+" - 开始执行:因双深库位阻塞，对浅库位进行移转（立即执行版)");
			News.warnNoLog("" + mark + "moveLocForDeepLoc" + " - 0" + " - 开始执行:因双深库位阻塞，对浅库位进行移转（立即执行版)");
			List<Integer> rows = locMastService.queryDistinctRow(crn.getId());
			LocMast loc = null;
			for (Integer row : rows) {
			@@ -1890,7 +2334,7 @@
			}

			if (null == loc) {
			News.error(""+mark+"moveLocForDeepLoc"+" - 1"+" - 双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			News.error("" + mark + "moveLocForDeepLoc" + " - 1" + " - 双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			return false;
			// throw new CoolException("双深库位 --- 浅库位阻塞异常！待移转浅库位：" + shallowLoc.getLocNo());
			} else {
			@@ -1918,7 +2362,7 @@
			wrkMast.setModiTime(new Date());
			int res = wrkMastMapper.insert(wrkMast);
			if (res == 0) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 2"+" - 保存工作档失败");
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 2" + " - 保存工作档失败");
			// throw new CoolException("保存工作档失败");
			return true;
			}
			@@ -1928,14 +2372,15 @@

			for (LocDetl locDetl : locDetls) {
			WrkDetl wrkDetl = new WrkDetl();
			wrkDetl.sync(locDetl);
			wrkDetl.setWrkNo(workNo);
			wrkDetl.setIoTime(new Date());
			wrkDetl.setAnfme(locDetl.getAnfme());
			VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			// VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
			wrkDetl.setAppeTime(new Date());
			wrkDetl.setModiTime(new Date());
			if (!wrkDetlService.insert(wrkDetl)) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 3"+" - 保存工作档明细失败");
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 3" + " - 保存工作档明细失败");
			// throw new CoolException("保存工作档明细失败");
			return true;
			}
			@@ -1946,12 +2391,12 @@
			shallowLoc.setLocSts("R"); // R.出库预约
			shallowLoc.setModiTime(new Date());
			if (!locMastService.updateById(shallowLoc)) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 4"+" - 更新源库位状态失败");
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 4" + " - 更新源库位状态失败");
			// throw new CoolException("更新源库位状态失败");
			return true;
			}
			} else {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 5"+" - 源库位出库失败");
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 5" + " - 源库位出库失败");
			// throw new CoolException("源库位出库失败");
			return true;
			}
			@@ -1960,23 +2405,23 @@
			loc.setLocSts("S"); // S.入库预约
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 6"+" - 更新目标库位状态失败");
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 6" + " - 更新目标库位状态失败");
			// throw new CoolException("更新目标库位状态失败");
			return true;
			}
			} else {
			News.errorNoLog(""+mark+"moveLocForDeepLoc"+" - 7"+" - 移转失败");
			News.errorNoLog("" + mark + "moveLocForDeepLoc" + " - 7" + " - 移转失败");
			// throw new CoolException("移转失败");
			return true;
			}
			} catch (Exception e){
			News.error(""+mark+"moveLocForDeepLoc"+" - 8"+" - 双深库位阻塞，对浅库位进行移转失败", e);
			} catch (Exception e) {
			News.error("" + mark + "moveLocForDeepLoc" + " - 8" + " - 双深库位阻塞，对浅库位进行移转失败", e);
			}
			}


			} catch (Exception e) {
			News.error(""+mark+"moveLocForDeepLoc"+" - 8"+" - 双深库位阻塞，对浅库位进行移转失败", e);
			News.error("" + mark + "moveLocForDeepLoc" + " - 8" + " - 双深库位阻塞，对浅库位进行移转失败", e);
			// e.printStackTrace();
			// TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
			}
			@@ -2010,6 +2455,11 @@
			LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
			LocMast loc = locMastService.queryDemoLoc(crn.getId());
			if (null == sourceLoc \|\| null == loc) {
			continue;
			}

			Integer ctnType = 1;
			if (ctnType.equals(loc.getCtnType())) {
			continue;
			}

			@@ -2067,6 +2517,7 @@
			// 修改目标库位状态
			if (loc.getLocSts().equals("O")) {
			loc.setLocSts("S"); // S.入库预约
			loc.setCtnType(1);
			loc.setModiTime(new Date());
			if (!locMastService.updateById(loc)) {
			throw new CoolException("更新目标库位状态失败");
			@@ -2136,16 +2587,22 @@

			// RGV ===>> 执行对RGV操作
			public synchronized void rgvExecute(Integer mark) {
			ArrayList<Integer> list = new ArrayList<Integer>(){{add(1090);add(1091);}};
			ArrayList<Integer> list = new ArrayList<Integer>() {{
			add(2003);
			add(2002);
			}};
			for (Integer staNo : list) {
			Integer devpId = null;
			Integer rgvStaNoDevpId = null;
			Integer rgvStaNo = null;
			if (staNo == 1090) {
			if (staNo == 2003) {
			devpId = 1;
			rgvStaNo = 1091;
			}else {
			rgvStaNo = 2002;
			rgvStaNoDevpId = 2;
			} else {
			devpId = 2;
			rgvStaNo = 1090;
			rgvStaNo = 2003;
			rgvStaNoDevpId = 1;
			}

			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devpId);
			@@ -2166,7 +2623,49 @@
			) {
			WrkMast wrkMast = wrkMastService.selectOne(new EntityWrapper<WrkMast>()
			.eq("wrk_no", staProtocol.getWorkNo()));

			if (wrkMast == null) {
			continue;
			}

			if (wrkMast.getWrkSts() == 201) {
			continue;
			}

			SiemensDevpThread devpThread2 = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, rgvStaNoDevpId);
			if (devpThread2 == null) {
			continue;
			}
			StaProtocol staProtocolRgvStaNo = devpThread2.getStation().get(rgvStaNo);
			if (staProtocolRgvStaNo == null) {
			continue;
			}

			if (!staProtocolRgvStaNo.isAutoing()) {
			continue;
			}

			if (staProtocolRgvStaNo.isLoading()) {
			continue;
			}

			// 获取RGV信息
			RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, 1);
			if (rgvThread == null) {
			continue;
			}

			RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			if (rgvProtocol == null) {
			continue;
			}

			if (rgvProtocol.statusType1 != RgvStatusType.IDLE && rgvProtocol.getTaskNo1() != 0) {
			continue;
			}

			Object object = redisUtil.get(RedisConstantType.RGV_MOVE_LOCK + wrkMast.getWrkNo());
			if (object != null) {
			continue;
			}

			@@ -2187,6 +2686,7 @@
			wrkMast.setWrkSts(201L);//201.RGV搬运中
			wrkMast.setModiTime(new Date());
			wrkMastService.updateById(wrkMast);
			redisUtil.set(RedisConstantType.RGV_MOVE_LOCK + wrkMast.getWrkNo(), "lock", 60 * 60);
			}
			}
			}
			@@ -2206,34 +2706,39 @@
			}

			// 状态：等待确认并且任务完成位 = 1
			if (rgvProtocol.statusType == RgvStatusType.WAITING && rgvProtocol.getTaskNo1() != 0) {
			News.warnNoLog(""+mark+" - 0"+" - 开始执行对RGV工作档的完成操作");
			if (rgvProtocol.statusType1 == RgvStatusType.WAITING && rgvProtocol.getTaskNo1() != 0) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行对RGV工作档的完成操作");
			// 获取入库待确认工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(rgvProtocol.getTaskNo1().intValue());
			if (wrkMast == null) {
			News.error(""+mark+" - 1"+" - RGV处于等待确认且任务完成状态，但未找到工作档。RGV号={}，工作号={}", rgvSlave.getId(), rgvProtocol.getTaskNo1());
			News.error("" + mark + " - 1" + " - RGV处于等待确认且任务完成状态，但未找到工作档。RGV号={}，工作号={}", rgvSlave.getId(), rgvProtocol.getTaskNo1());
			continue;
			}

			if (Cools.isEmpty(wrkMast.getMemo())) {
			News.error(""+mark+" - 1"+" - RGV处于等待确认且任务完成状态，但工作档数据异常。RGV号={}，工作号={}", rgvSlave.getId(), rgvProtocol.getTaskNo1());
			if (wrkMast.getWrkSts() != 201) {
			continue;
			}

			if (wrkMast.getIoType() == 3) {
			//站到站走另外一个方法
			continue;
			}

			Integer devpId = null;
			Integer devpStaNo = null;
			String locNo = null;
			Long updateWrkSts = null;
			if (wrkMast.getIoType() < 100) {
			//入库
			wrkMast.setWrkSts(2L);
			updateWrkSts = 2L;
			devpId = 1;
			devpStaNo = 1090;
			devpStaNo = 2003;
			locNo = wrkMast.getLocNo();
			}else {
			} else {
			//出库
			wrkMast.setWrkSts(15L);
			updateWrkSts = 15L;
			devpId = 2;
			devpStaNo = 1091;
			devpStaNo = 2002;
			locNo = wrkMast.getSourceLocNo();
			}

			@@ -2260,14 +2765,92 @@
			if (!result) {
			throw new CoolException("更新plc站点信息失败");
			}

			Date now = new Date();
			wrkMast.setModiTime(now);
			wrkMastMapper.updateById(wrkMast);
			wrkMastMapper.updateWrkSts(updateWrkSts, wrkMast.getWrkNo());
			rgvThread.setResetFlag1(true);
			}
			}
			}
			News.infoNoLog(""+mark+" - 0"+" - 对工作档的完成操作执行完成");
			News.infoNoLog("" + mark + " - 0" + " - 对工作档的完成操作执行完成");
			}

			// RGV ===>> 执行对RGV工作档的完成操作站到站
			public synchronized void rgvFinished2(Integer mark) {
			for (RgvSlave rgvSlave : slaveProperties.getRgv()) {
			// 获取RGV信息
			RgvThread rgvThread = (RgvThread) SlaveConnection.get(SlaveType.Rgv, rgvSlave.getId());
			if (rgvThread == null) {
			continue;
			}

			RgvProtocol rgvProtocol = rgvThread.getRgvProtocol();
			if (rgvProtocol == null) {
			continue;
			}

			// 状态：等待确认并且任务完成位 = 1
			if (rgvProtocol.statusType1 == RgvStatusType.WAITING && rgvProtocol.getTaskNo1() != 0) {
			News.warnNoLog("" + mark + " - 0" + " - 开始执行对RGV工作档的完成操作");
			// 获取入库待确认工作档
			WrkMast wrkMast = wrkMastMapper.selectPakInStep3(rgvProtocol.getTaskNo1().intValue());
			if (wrkMast == null) {
			News.error("" + mark + " - 1" + " - RGV处于等待确认且任务完成状态，但未找到工作档。RGV号={}，工作号={}", rgvSlave.getId(), rgvProtocol.getTaskNo1());
			continue;
			}

			if (wrkMast.getWrkSts() != 201) {
			continue;
			}

			if (wrkMast.getIoType() != 3) {
			//不是站到站
			continue;
			}

			Integer devpId = 2;
			Integer devpStaNo = 2002;

			// 获取入库站信息
			SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devpId);
			StaProtocol staProtocol = devpThread.getStation().get(devpStaNo);
			if (staProtocol == null) {
			continue;
			} else {
			staProtocol = staProtocol.clone();
			}

			if (staProtocol.isAutoing()
			&& staProtocol.isLoading()
			&& staProtocol.getWorkNo() == 0
			) {

			short locType2 = 1;
			String barcode = wrkMast.getBarcode();
			if (barcode.startsWith("11")) {
			locType2 = 1;
			} else if (barcode.startsWith("13")) {
			locType2 = 2;
			} else if (barcode.startsWith("16")) {
			locType2 = 3;
			} else {
			continue;
			}

			staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
			staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
			staProtocol.setPalletSize(locType2);
			devpThread.setPakMk(staProtocol.getSiteId(), false);
			boolean result = MessageQueue.offer(SlaveType.Devp, devpId, new Task(2, staProtocol));
			if (!result) {
			throw new CoolException("更新plc站点信息失败");
			}
			rgvThread.setResetFlag1(true);

			wrkMastService.delete(new EntityWrapper<WrkMast>()
			.eq("wrk_no", wrkMast.getWrkNo()));
			}
			}
			}
			News.infoNoLog("" + mark + " - 0" + " - 对工作档的完成操作执行完成");
			}

			// /**