指令

Junjie

2023-08-10 0e9686edc067b0779562bfa2452d49daf4cb7b18

 src/main/java/com/zy/asrs/service/impl/MainServiceImpl.java

@@ -9,9 +9,11 @@
import com.core.exception.CoolException;
import com.zy.asrs.entity.*;
import com.zy.asrs.mapper.BasCrnErrorMapper;
import com.zy.asrs.mapper.TaskWrkMapper;
import com.zy.asrs.mapper.WaitPakinMapper;
import com.zy.asrs.mapper.WrkMastMapper;
import com.zy.asrs.service.*;
import com.zy.asrs.utils.CommandUtils;
import com.zy.asrs.utils.Utils;
import com.zy.asrs.utils.VersionUtils;
import com.zy.common.model.LocTypeDto;
@@ -87,6 +89,9 @@
    private BasErrLogService basErrLogService;
    @Autowired
    private BasCrnErrorMapper basCrnErrorMapper;
    @Autowired
    private TaskWrkMapper taskWrkMapper;

    @Value("${wms.url}")
    private String wmsUrl;

@@ -105,14 +110,14 @@
                    continue;
                }
                String barcode = barcodeThread.getBarcode();
//                if(!Cools.isEmpty(barcode)) {
//                    log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
//                    if("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
//                        continue;
//                    }
//                } else {
//                    continue;
//                }
                if(!Cools.isEmpty(barcode)) {
                    log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
                    if("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        continue;
                    }
                } else {
                    continue;
                }

                // 获取入库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());
@@ -123,27 +128,28 @@
                    staProtocol = staProtocol.clone();
                }

//                // 入出库模式判断
//                if ( inSta.getStaNo()==180 && devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }
                // 入出库模式判断
//                if ( inSta.getStaNo()==203 && devpThread.ioModeOf2F != IoModeType.PAKIN_MODE) { continue; }
                if ( inSta.getStaNo()==203 && devpThread.ioModeOf2F == IoModeType.PAKOUT_MODE) { continue; }

                // 判断是否满足入库条件
                if (staProtocol.isAutoing() && staProtocol.isLoading()
                        && staProtocol.isInEnable()
                        && !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() == 9999)
                        && !staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() > 9990)
                        && staProtocol.isPakMk()){// && !Cools.isEmpty(barcode)) {

                    if(Cools.isEmpty(barcode) || "NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
                        //条码为空或者不符合，退库到172站点
                        staProtocol.setWorkNo((short)9999);
                        staProtocol.setStaNo((short)172);
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                        if (!result) {
                            throw new CoolException("更新plc站点信息失败");
                        }
                        continue;
                    }
//                    if(Cools.isEmpty(barcode) || "NG".endsWith(barcode) || "NoRead".equals(barcode)) {
//                        log.info("{}号条码扫描器检测条码信息：{}", inSta.getBarcode(), barcode);
//                        //条码为空或者不符合，退库到172站点
//                        staProtocol.setWorkNo((short)9999);
//                        staProtocol.setStaNo((short)172);
//                        devpThread.setPakMk(staProtocol.getSiteId(), false);
//                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                        if (!result) {
//                            throw new CoolException("更新plc站点信息失败");
//                        }
//                        continue;
//                    }

                    // 判断重复工作档
                    WrkMast wrkMast = wrkMastMapper.selectPakInStep1(inSta.getStaNo(), barcode);
@@ -181,7 +187,7 @@
                            staProtocol.setWorkNo(dto.getWorkNo().shortValue());
                            staProtocol.setStaNo(dto.getStaNo().shortValue());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            boolean result = CommandUtils.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            if (!result) {
                                throw new CoolException("更新plc站点信息失败");
                            }
@@ -279,7 +285,7 @@
                }

//                // 入出库模式判断
//                if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }
                if ( inSta.getStaNo()==203 && devpThread.ioModeOf2F != IoModeType.PAKIN_MODE) { continue; }

                // 判断是否满足入库条件
                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
@@ -291,21 +297,28 @@

                    // 命令下发区 --------------------------------------------------------------------------

                    // 更新站点信息 且 下发plc命令
                    staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
                    staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
                    devpThread.setPakMk(staProtocol.getSiteId(), false);
                    boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                    if (result) {
                        // 更新工作主档
                        wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
                        wrkMast.setModiTime(new Date());
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            log.error("更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
                        }
                    } else {
                        log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
                    }
//                    // 更新站点信息 且 下发plc命令
//                    staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
//                    staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
//                    devpThread.setPakMk(staProtocol.getSiteId(), false);
//                    boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
//                    if (result) {
//                        // 更新工作主档
//                        wrkMast.setWrkSts(2L); // 工作状态：2.设备上走
//                        wrkMast.setModiTime(new Date());
//                        if (wrkMastMapper.updateById(wrkMast) == 0) {
//                            log.error("更新工作档失败！！！ [工作号：{}]", wrkMast.getWrkNo());
//                        }
//
//                        //更新WMS任务状态
//                        WmsWrk wmsWrk = wmsWrkService.selectByWmsWrkNo(wrkMast.getWmsWrkNo());
//                        wmsWrk.setWmsStatus(WmsStatusType.WORKING.id);//执行中
//                        wmsWrk.setModiTime(new Date());
//                        wmsWrkService.updateById(wmsWrk);
//
//                    } else {
//                        log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
//                    }

                }

@@ -322,12 +335,12 @@
        for (DevpSlave devp : slaveProperties.getDevp()) {
            // 遍历拣料入库口
            for (DevpSlave.Sta pickSta : devp.getPickSta()) {
                // 获取条码扫描仪信息
                BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
                if (barcodeThread == null) {
                    continue;
                }
                String barcode = barcodeThread.getBarcode();
//                // 获取条码扫描仪信息
//                BarcodeThread barcodeThread = (BarcodeThread) SlaveConnection.get(SlaveType.Barcode, pickSta.getBarcode());
//                if (barcodeThread == null) {
//                    continue;
//                }
//                String barcode = barcodeThread.getBarcode();
//                if(!Cools.isEmpty(barcode)) {
//                    log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
//                    if("NG".endsWith(barcode) || "NoRead".equals(barcode)) {
@@ -350,21 +363,8 @@
//                if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }

                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable() && staProtocol.isPakMk()){

                    if(Cools.isEmpty(barcode) || "NG".endsWith(barcode) || "NoRead".equals(barcode)) {
                        log.info("{}号条码扫描器检测条码信息：{}", pickSta.getBarcode(), barcode);
                        //条码为空或者不符合，退库到172站点
                        staProtocol.setWorkNo((short)9999);
                        staProtocol.setStaNo((short)172);
                        devpThread.setPakMk(staProtocol.getSiteId(), false);
                        boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                        if (!result) {
                            throw new CoolException("更新plc站点信息失败");
                        }
                        continue;
                    }

                    WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
//                    WrkMast wrkMast = wrkMastMapper.selectPickStep(barcode);
                    WrkMast wrkMast = wrkMastMapper.selectPakInStep3(staProtocol.getWorkNo().intValue());
                    if (wrkMast == null) {
                        // 无拣料数据
                        continue;
@@ -404,19 +404,23 @@
                            throw new CoolException("保存工作主档历史档失败");
                        }

                        Date now = new Date();
                        // 堆垛机站点(目标站)
                        Integer staNo = staDesc.getCrnStn();
                        // 更新工作档数据状态
                        wrkMast.setIoTime(now);
                        wrkMast.setIoType(wrkMast.getIoType() - 50); // 入出库类型: 103->53,104->54,107->57
                        wrkMast.setWrkSts(2L); // 工作状态: 2.设备上走
                        wrkMast.setSourceStaNo(wrkMast.getStaNo()); // 源站
                        wrkMast.setStaNo(staNo); // 目标站
                        wrkMast.setLocNo(wrkMast.getSourceLocNo()); // 目标库位 = 出库时的源库位
                        wrkMast.setSourceLocNo(""); // 源库位清空
                        wrkMast.setModiTime(new Date());
                        wrkMast.setModiTime(now);
                        if (wrkMastMapper.updateById(wrkMast) == 0) {
                            throw new CoolException("更新工作档数据状态失败");
                        }
                        // 更新明细档io_time (历史档关联使用）
                        wrkDetlService.updateIoTime(wrkMast.getWrkNo(), now);
                        // 修改库位状态 Q.拣料/盘点/并板再入库
                        LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
                        locMast.setLocSts("Q");
@@ -434,7 +438,7 @@
                    staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
                    staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
                    devpThread.setPakMk(staProtocol.getSiteId(), false);
                    boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                    boolean result = CommandUtils.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                    if (!result) {
                        log.error("发布命令至输送线队列失败！！！ [plc编号：{}]", devp.getId());
                    }
@@ -481,15 +485,14 @@
                    }
                    //  判断堆垛机状态等待确认
                    if (crnProtocol.modeType == CrnModeType.AUTO && crnProtocol.getTaskNo().equals(wrkMast.getWrkNo().shortValue())
                            && crnProtocol.statusType == CrnStatusType.WAITING
                            && crnProtocol.getTaskFinish() == 1
                            && crnProtocol.forkPosType == CrnForkPosType.HOME) {

                        // 命令下发区 --------------------------------------------------------------------------

                        // 下发站点信息
                        staProtocol.setWorkNo(wrkMast.getWrkNo().shortValue());
                        staProtocol.setStaNo(wrkMast.getStaNo().shortValue());
                        if (!MessageQueue.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol))) {
                        if (!CommandUtils.offer(SlaveType.Devp, crnStn.getDevpPlcId(), new Task(2, staProtocol))) {
                            continue;
                        }

@@ -524,8 +527,10 @@
                log.error("{}号堆垛机尚未在数据库进行维护！", crn.getId());
                continue;
            }

            // 只有当堆垛机空闲 并且 无任务时才继续执行
            if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
            if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO
                    && crnProtocol.getLoaded() == 0 && crnProtocol.getForkPos() == 0) {
                // 如果最近一次是入库模式
                if (crnProtocol.getLastIo().equals("I")) {
                    if (basCrnp.getInEnable().equals("Y")) {
@@ -549,6 +554,8 @@
            }
            // 库位移转
            this.locToLoc(crn, crnProtocol);
//            this.crnRebackHp(crnProtocol, crnThread);

        }
    }

@@ -580,19 +587,19 @@
                continue;
            }
            // 获取工作状态为2（设备上走）的入库工作档
            WrkMast wrkMast = wrkMastMapper.selectPakInStep2(slave.getId(), staProtocol.getWorkNo().intValue(), crnStn.getStaNo());
            if(null == wrkMast) {
//                log.error("查询无待入库数据--wrk_sts=2, 工作号={}", staProtocol.getWorkNo());
            TaskWrk taskWrk = taskWrkMapper.selectPakIn(slave.getId(), staProtocol.getWorkNo().intValue(), crnStn.getStaNo().toString());
            if(null == taskWrk) {
                continue;
            }
            // 获取库位信息
            LocMast locMast = locMastService.selectById(wrkMast.getLocNo());
            String locNo = taskWrk.getTargetPoint();
            LocMast locMast = locMastService.selectById(locNo);
            if (locMast == null) {
                log.error("查询库存无数据--库位号{}", wrkMast.getLocNo());
                log.error("查询库存无数据--库位号{}", locNo);
                continue;
            }
            if (!locMast.getLocSts().equals("S") && !locMast.getLocSts().equals("Q")) {
                log.error("入库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), locMast.getLocSts());
                log.error("入库操作库位状态不符合--状态, 库位号={}，库位状态={}", locNo, locMast.getLocSts());
                continue;
            }

@@ -602,49 +609,14 @@
            }

            // 已经存在吊车执行任务时，则过滤
            if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                return;
            }

            // 双深库位且浅库位有货，则需先对浅库位进行库位移转
            if (Utils.isDeepLoc(slaveProperties, wrkMast.getLocNo())) {
                String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getLocNo());
                LocMast shallowLoc = locMastService.selectById(shallowLocNo);
                // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用 直接搬！
                if (shallowLoc.getLocSts().equals("P") || shallowLoc.getLocSts().equals("R")) {
                    WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                    if (null == waitWrkMast) {
                        log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
                    } else {
                        waitWrkMast.setIoPri(15D);
                        waitWrkMast.setModiTime(new Date());
                        if (wrkMastMapper.updateById(waitWrkMast) == 0) {
                            log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
                        }
                    }
                    continue;
                } else if (shallowLoc.getLocSts().equals("F") || shallowLoc.getLocSts().equals("D")) {
                    // 此标记避免多次执行移库任务
                    if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())) {
                        wrkMast.setUpdMk("Y");
                        wrkMast.setIoPri(14D);
                        wrkMastMapper.updateById(wrkMast);
                        // 生成工作档、改变浅库位的源库/目标库 库位状态、下发堆垛机命令（立马执行)
                        moveLocForDeepLocPakin(slave, shallowLoc, wrkMast);
                    }
                    continue;
                } else if (shallowLoc.getLocSts().equals("Q")){
                    WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                    if (null != waitWrkMast && waitWrkMast.getWrkSts()==4) {
                        continue;
                    }
                }
            if (taskWrkMapper.selectCrnWorking(slave.getId()) != null) {
                continue;
            }

            // 命令下发区 --------------------------------------------------------------------------
            CrnCommand crnCommand = new CrnCommand();
            crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
            crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
            crnCommand.setTaskNo(taskWrk.getWrkNo().shortValue()); // 工作号
            crnCommand.setAckFinish((short) 0);  // 任务完成确认位
            crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
            crnCommand.setSourcePosX(crnStn.getRow().shortValue());     // 源库位排
@@ -653,29 +625,15 @@
            crnCommand.setDestinationPosX(locMast.getRow1().shortValue());     // 目标库位排
            crnCommand.setDestinationPosY(locMast.getBay1().shortValue());     // 目标库位列
            crnCommand.setDestinationPosZ(locMast.getLev1().shortValue());     // 目标库位层
            if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
            if (!CommandUtils.offer(SlaveType.Crn, taskWrk.getCrnNo(), new Task(2, crnCommand))) {
                log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", taskWrk.getCrnNo(), JSON.toJSON(crnCommand));
            } else {

//                long startTime = System.currentTimeMillis();
//                while ((System.currentTimeMillis() - startTime) < COMMAND_TIMEOUT) {
//
//                    if (true) {
//                        break;
//                    }
//
//                    try{
//                        Thread.sleep(500);
//                    }catch(Exception ignore){}
//                }

                // 修改工作档状态 2.设备上走 => 3.吊车入库中
                Date now = new Date();
                wrkMast.setWrkSts(3L);
                wrkMast.setCrnStrTime(now);
                wrkMast.setModiTime(now);
                if (wrkMastMapper.updateById(wrkMast) == 0) {
                    log.error("修改工作档状态 2.设备上走 => 3.吊车入库中 失败！！，工作号={}", wrkMast.getWrkNo());
                taskWrk.setWrkSts(3);
                taskWrk.setModiTime(now);
                if (taskWrkMapper.updateById(taskWrk) == 0) {
                    log.error("修改工作档状态 2.设备上走 => 3.吊车入库中 失败！！，工作号={}", taskWrk.getWrkNo());
                }
            }
        }
@@ -683,120 +641,204 @@

    /**
     * 出库  ===>>  库位到堆垛机站
     * 2022-06-09 TQS修改，查询工作档LIST，遍历下发，防止第一个任务堵塞出库
     */
    public void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
        for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
            // 获取工作状态为11（生成出库ID）的出库工作档
            WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
            if (wrkMast == null) {
                continue;
            }
            // 工作档状态判断
            if (wrkMast.getIoType() < 100 || wrkMast.getSourceStaNo() == null){
                log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
                continue;
            }
            // 获取源库位信息
            LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
            if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
                log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
                continue;
            }
            // 获取堆垛机出库站信息
            SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
            StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
            if (staProtocol == null) {
                continue;
            } else {
                staProtocol = staProtocol.clone();
            }

//            // 入出库模式判断
//            if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }


            // 查询站点详细信息
            BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
            if (staDetl == null) {
                log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
                continue;
            }
            // 判断堆垛机出库站状态
            if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
                    && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
                // 命令下发区 --------------------------------------------------------------------------

                // 堆垛机控制过滤
                if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) || crnProtocol.getTaskNo() != 0) {
            List<TaskWrk> taskWrks = taskWrkMapper.selectPakOut(slave.getId(), crnStn.getStaNo().toString());
            for (TaskWrk taskWrk : taskWrks){
                if (taskWrk == null) {
                    continue;
                }

                // 双深库位且浅库位有货，则需先对浅库位进行库位移转
                if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
                    String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
                    LocMast shallowLoc = locMastService.selectById(shallowLocNo);
                    // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用 直接搬！
                    if (shallowLoc.getLocSts().equals("P") || shallowLoc.getLocSts().equals("R")) {
                        WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
                        if (null == waitWrkMast) {
                            log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
                        } else {
                            if(waitWrkMast.getWrkSts() == 11) {
                                waitWrkMast.setIoPri(15D);
                                waitWrkMast.setModiTime(new Date());
                                if (wrkMastMapper.updateById(waitWrkMast) == 0) {
                                    log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
                                }
                                continue;
                            } else {

                            }
                        }
                    } else if (shallowLoc.getLocSts().equals("F") || shallowLoc.getLocSts().equals("D")) {
                        // 此标记避免多次执行移库任务
                        if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())) {
                            wrkMast.setUpdMk("Y");
                            wrkMastMapper.updateById(wrkMast);
                            // 生成工作档、改变浅库位的源库/目标库 库位状态、下发堆垛机命令（立马执行)
                            moveLocForDeepLoc(slave, shallowLoc);
                        }
                        log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
                        continue;
                    }
                // 工作档状态判断
                if (taskWrk.getIoType() != 2 || taskWrk.getTargetPoint() == null) {
                    log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", taskWrk.getWrkNo(), taskWrk.getTargetPoint(), taskWrk.getIoType());
                    continue;
                }

                // 已经存在吊车执行任务时，则过滤
                if (wrkMastMapper.selectWorking(slave.getId()) != null) {
                    return;
                // 获取源库位信息
                String locNo = taskWrk.getStartPoint();
                LocMast sourceSta = locMastService.selectById(locNo);
                if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
                    log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", locNo, sourceSta.getLocSts());
                    continue;
                }

                // 1.堆垛机开始移动
                CrnCommand crnCommand = new CrnCommand();
                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
                crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
                    log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
                // 获取堆垛机出库站信息
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
                StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
                if (staProtocol == null) {
                    break;
                } else {
                    // 修改工作档状态 11.生成出库ID => 12.吊车出库中
                    Date now = new Date();
                    wrkMast.setWrkSts(12L);
                    wrkMast.setCrnStrTime(now);
                    wrkMast.setModiTime(now);
                    if (wrkMastMapper.updateById(wrkMast) == 0) {
                        log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
                    staProtocol = staProtocol.clone();
                }

                // 查询站点详细信息
                BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
                if (staDetl == null) {
                    log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
                    break;
                }

                // 判断堆垛机出库站状态
                if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
                        && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
                    // 命令下发区 --------------------------------------------------------------------------

                    // 堆垛机控制过滤
                    if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) || crnProtocol.getTaskNo() != 0) {
                        break;
                    }

                    // 已经存在吊车执行任务时，则过滤
                    if (taskWrkMapper.selectCrnWorking(slave.getId()) != null) {
                        break;
                    }

                    // 1.堆垛机开始移动
                    CrnCommand crnCommand = new CrnCommand();
                    crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
                    crnCommand.setTaskNo(taskWrk.getWrkNo().shortValue()); // 工作号
                    crnCommand.setAckFinish((short) 0);  // 任务完成确认位
                    crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
                    crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
                    crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
                    crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
                    crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
                    crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
                    crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
                    if (!CommandUtils.offer(SlaveType.Crn, taskWrk.getCrnNo(), new Task(2, crnCommand))) {
                        log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", taskWrk.getCrnNo(), JSON.toJSON(crnCommand));
                    } else {
                        // 修改工作档状态 11.生成出库ID => 12.吊车出库中
                        Date now = new Date();
                        taskWrk.setWrkSts(12);
                        taskWrk.setModiTime(now);
                        if (taskWrkMapper.updateById(taskWrk) == 0) {
                            log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中 失败！！，工作号={}", taskWrk.getWrkNo());
                        }
                        break;
                    }
                }
            }
        }
    }

//    /**
//     * 出库  ===>>  库位到堆垛机站
//     */
//    public void locToCrnStn(CrnSlave slave, CrnProtocol crnProtocol){
//        for (CrnSlave.CrnStn crnStn : slave.getCrnOutStn()) {
//            // 获取工作状态为11（生成出库ID）的出库工作档
//            WrkMast wrkMast = wrkMastMapper.selectPakOutStep1(slave.getId(), crnStn.getStaNo());
//            if (wrkMast == null) {
//                continue;
//            }
//            // 工作档状态判断
//            if (wrkMast.getIoType() < 100 || wrkMast.getSourceStaNo() == null){
//                log.error("查询工作档数据不符合条件--入出类型/站点, 工作号={}，源库位={}，入出类型={}", wrkMast.getWrkNo(), wrkMast.getSourceLocNo(), wrkMast.getIoType());
//                continue;
//            }
//            // 获取源库位信息
//            LocMast sourceSta = locMastService.selectById(wrkMast.getSourceLocNo());
//            if (!sourceSta.getLocSts().equals("R") &&!sourceSta.getLocSts().equals("P")) {
//                log.error("出库操作库位状态不符合--状态, 库位号={}，库位状态={}", wrkMast.getLocNo(), sourceSta.getLocSts());
//                continue;
//            }
//            // 获取堆垛机出库站信息
//            SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, crnStn.getDevpPlcId());
//            StaProtocol staProtocol = devpThread.getStation().get(crnStn.getStaNo());
//            if (staProtocol == null) {
//                continue;
//            } else {
//                staProtocol = staProtocol.clone();
//            }
//
////            // 入出库模式判断
////            if (devpThread.ioMode != IoModeType.PAKOUT_MODE) { continue; }
//
//
//            // 查询站点详细信息
//            BasDevp staDetl = basDevpService.selectById(crnStn.getStaNo());
//            if (staDetl == null) {
//                log.error("出库 ===>> 堆垛机站点在数据库不存在, 站点编号={}", crnStn.getStaNo());
//                continue;
//            }
//            // 判断堆垛机出库站状态
//            if (staProtocol.isAutoing() && !staProtocol.isLoading() && staDetl.getCanouting() !=null && staDetl.getCanouting().equals("Y")
//                    && staProtocol.getWorkNo() == 0 && staProtocol.isOutEnable()) {
//                // 命令下发区 --------------------------------------------------------------------------
//
//                // 堆垛机控制过滤
//                if (!crnProtocol.getStatusType().equals(CrnStatusType.IDLE) || crnProtocol.getTaskNo() != 0) {
//                    continue;
//                }
//
//                // 双深库位且浅库位有货，则需先对浅库位进行库位移转
//                if (Utils.isDeepLoc(slaveProperties, wrkMast.getSourceLocNo())) {
//                    String shallowLocNo = Utils.getShallowLoc(slaveProperties, wrkMast.getSourceLocNo());
//                    LocMast shallowLoc = locMastService.selectById(shallowLocNo);
//                    // O.空库位、Q.拣料/盘点/并板再入库、S.入库预约、X.禁用 直接搬！
//                    if (shallowLoc.getLocSts().equals("P") || shallowLoc.getLocSts().equals("R")) {
//                        WrkMast waitWrkMast = wrkMastMapper.selectByLocNo(shallowLocNo);
//                        if (null == waitWrkMast) {
//                            log.error("{}库位异常，未检索到相应工作档！", shallowLocNo);
//                        } else {
//                            if(waitWrkMast.getWrkSts() == 11) {
//                                waitWrkMast.setIoPri(15D);
//                                waitWrkMast.setModiTime(new Date());
//                                if (wrkMastMapper.updateById(waitWrkMast) == 0) {
//                                    log.error("调整工作档优先级失败！工作号={}", waitWrkMast.getWrkNo());
//                                }
//                                continue;
//                            } else {
//
//                            }
//                        }
//                    } else if (shallowLoc.getLocSts().equals("F") || shallowLoc.getLocSts().equals("D")) {
//                        // 此标记避免多次执行移库任务
//                        if (Cools.isEmpty(wrkMast.getUpdMk()) || "N".equals(wrkMast.getUpdMk())) {
//                            wrkMast.setUpdMk("Y");
//                            wrkMastMapper.updateById(wrkMast);
//                            // 生成工作档、改变浅库位的源库/目标库 库位状态、下发堆垛机命令（立马执行)
//                            moveLocForDeepLoc(slave, shallowLoc);
//                        }
//                        log.error("{}任务出库失败，浅库位堵塞！", wrkMast.getWrkNo());
//                        continue;
//                    }
//                }
//
//                // 已经存在吊车执行任务时，则过滤
//                if (wrkMastMapper.selectWorking(slave.getId()) != null) {
//                    return;
//                }
//
//                // 1.堆垛机开始移动
//                CrnCommand crnCommand = new CrnCommand();
//                crnCommand.setCrnNo(slave.getId()); // 堆垛机编号
//                crnCommand.setTaskNo(wrkMast.getWrkNo().shortValue()); // 工作号
//                crnCommand.setAckFinish((short) 0);  // 任务完成确认位
//                crnCommand.setTaskMode(CrnTaskModeType.LOC_MOVE); // 任务模式:  库位移转
//                crnCommand.setSourcePosX(sourceSta.getRow1().shortValue());     // 源库位排
//                crnCommand.setSourcePosY(sourceSta.getBay1().shortValue());     // 源库位列
//                crnCommand.setSourcePosZ(sourceSta.getLev1().shortValue());     // 源库位层
//                crnCommand.setDestinationPosX(crnStn.getRow().shortValue());     // 目标库位排
//                crnCommand.setDestinationPosY(crnStn.getBay().shortValue());     // 目标库位列
//                crnCommand.setDestinationPosZ(crnStn.getLev().shortValue());     // 目标库位层
//                if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
//                    log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
//                } else {
//                    // 修改工作档状态 11.生成出库ID => 12.吊车出库中
//                    Date now = new Date();
//                    wrkMast.setWrkSts(12L);
//                    wrkMast.setCrnStrTime(now);
//                    wrkMast.setModiTime(now);
//                    if (wrkMastMapper.updateById(wrkMast) == 0) {
//                        log.error("修改工作档状态 11.生成出库ID => 12.吊车出库中 失败！！，工作号={}", wrkMast.getWrkNo());
//                    }
//                }
//            }
//        }
//    }

    /**
     * 库位移转
@@ -835,7 +877,7 @@
        }

        // 已经存在吊车执行任务时，则过滤
        if (wrkMastMapper.selectLocMoving(slave.getId()) != null) {
        if (wrkMastMapper.selectWorking(slave.getId()) != null) {
            return;
        }

@@ -851,7 +893,7 @@
        crnCommand.setDestinationPosX(sta.getRow1().shortValue());     // 目标库位排
        crnCommand.setDestinationPosY(sta.getBay1().shortValue());     // 目标库位列
        crnCommand.setDestinationPosZ(sta.getLev1().shortValue());     // 目标库位层
        if (!MessageQueue.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
        if (!CommandUtils.offer(SlaveType.Crn, wrkMast.getCrnNo(), new Task(2, crnCommand))) {
            log.error("堆垛机命令下发失败，堆垛机号={}，任务数据={}", wrkMast.getCrnNo(), JSON.toJSON(crnCommand));
        } else {
            // 修改工作档状态 11.生成出库ID => 12.吊车出库中
@@ -877,7 +919,7 @@
            CrnProtocol crnProtocol = crnThread.getCrnProtocol();
            if (crnProtocol == null) { continue; }
            //  状态：等待确认 并且  任务完成位 = 1
            if (crnProtocol.statusType == CrnStatusType.WAITING && crnProtocol.getTaskNo() != 0) {
            if (crnProtocol.getTaskFinish() == 1 && crnProtocol.getTaskNo() != 0) {
                // 获取入库待确认工作档
                WrkMast wrkMast = wrkMastMapper.selectPakInStep3(crnProtocol.getTaskNo().intValue());
                if (wrkMast == null) {
@@ -885,20 +927,20 @@
                    continue;
                }
                // 入库 + 库位转移  ==> 4.入库完成
                if (wrkMast.getWrkSts() == 3 || (wrkMast.getWrkSts() == 12 && wrkMast.getIoType() == 11)){
                if (wrkMast.getWrkSts() == 3 || (wrkMast.getWrkSts() == 12 && wrkMast.getIoType() == 11)) {
                    wrkMast.setWrkSts(4L);
                } else  {
                } else {
                    continue;
                }
                Date now = new Date();
                wrkMast.setCrnEndTime(now);
                wrkMast.setModiTime(now);
                Integer integerWrkMast = wrkMastMapper.updateById(wrkMast);
                // 修改成功后复位堆垛机
                if (wrkMastMapper.updateById(wrkMast) > 0) {
                if (integerWrkMast > 0) {
                    // 堆垛机复位
                    crnThread.setResetFlag(true);
                }

            }
        }
    }
@@ -923,13 +965,13 @@
                    BasErrLog latest = basErrLogService.findLatestByTaskNo(crn.getId(), crnProtocol.getTaskNo().intValue());
                    // 有异常
                    if (latest == null) {
                        if (crnProtocol.getAlarm() != null && crnProtocol.getAlarm() > 0) {
                        if (crnProtocol.getAlarm1() != null && crnProtocol.getAlarm1() > 0) {
                            WrkMast wrkMast = wrkMastMapper.selectById(crnProtocol.getTaskNo());
                            if (wrkMast == null) {
                                continue;
                            }
                            BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm());
                            String errName = crnError==null? String.valueOf(crnProtocol.getAlarm()):crnError.getErrName();
                            BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm1());
                            String errName = crnError==null? String.valueOf(crnProtocol.getAlarm1()):crnError.getErrName();
                            BasErrLog basErrLog = new BasErrLog(
                                    null,    // 编号
                                    wrkMast.getWrkNo(),    // 工作号
@@ -944,7 +986,7 @@
                                    wrkMast.getSourceStaNo(),    // 源站
                                    wrkMast.getSourceLocNo(),    // 源库位
                                    wrkMast.getBarcode(),    // 条码
                                    (int) crnProtocol.getAlarm(),    // 异常码
                                    (int) crnProtocol.getAlarm1(),    // 异常码
                                    errName,    // 异常
                                    1,    // 异常情况
                                    now,    // 添加时间
@@ -959,7 +1001,7 @@
                        }
                    } else {
                        // 异常修复
                        if (crnProtocol.getAlarm() == null || crnProtocol.getAlarm() == 0) {
                        if (crnProtocol.getAlarm1() == null || crnProtocol.getAlarm1() == 0) {
                            latest.setEndTime(now);
                            latest.setUpdateTime(now);
                            latest.setStatus(2);
@@ -972,11 +1014,11 @@
                } else {
                    BasErrLog latest = basErrLogService.findLatest(crn.getId());
                    // 有异常
                    if (crnProtocol.getAlarm() != null && crnProtocol.getAlarm() > 0) {
                    if (crnProtocol.getAlarm1() != null && crnProtocol.getAlarm1() > 0) {
                        // 记录新异常
                        if (latest == null || (latest.getErrCode() != crnProtocol.getAlarm().intValue())) {
                            BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm());
                            String errName = crnError==null? String.valueOf(crnProtocol.getAlarm()):crnError.getErrName();
                        if (latest == null || (latest.getErrCode() != crnProtocol.getAlarm1().intValue())) {
                            BasCrnError crnError = basCrnErrorMapper.selectById(crnProtocol.getAlarm1());
                            String errName = crnError==null? String.valueOf(crnProtocol.getAlarm1()):crnError.getErrName();
                            BasErrLog basErrLog = new BasErrLog(
                                    null,    // 编号
                                    null,    // 工作号
@@ -991,7 +1033,7 @@
                                    null,    // 源站
                                    null,    // 源库位
                                    null,    // 条码
                                    (int)crnProtocol.getAlarm(),    // 异常码
                                    (int)crnProtocol.getAlarm1(),    // 异常码
                                    errName,    // 异常
                                    1,    // 异常情况
                                    now,    // 添加时间
@@ -1043,11 +1085,12 @@
                }

//                // 入出库模式判断
//                if (devpThread.ioMode != IoModeType.PAKIN_MODE) { continue; }
//                if ( emptyInSta.getStaNo()==203 && devpThread.ioModeOf2F != IoModeType.PAKIN_MODE) { continue; }
                if ( emptyInSta.getStaNo()==203 && devpThread.ioModeOf2F == IoModeType.PAKOUT_MODE) { continue; }

                // 站点条件判断
                if (staProtocol.isAutoing() && staProtocol.isLoading() && staProtocol.isInEnable()
                        && staProtocol.isEmptyMk() && (staProtocol.getWorkNo() == 0 || staProtocol.getWorkNo() == 9999 || staProtocol.getWorkNo() == 9990 || staProtocol.getWorkNo() == 9997) && staProtocol.isPakMk()) {
                        && staProtocol.isEmptyMk() && (staProtocol.getWorkNo() > 9990 && staProtocol.getWorkNo() <= 9999) && staProtocol.isPakMk()) {

                    try {
                        LocTypeDto locTypeDto = new LocTypeDto(staProtocol);
@@ -1070,7 +1113,7 @@
                            staProtocol.setWorkNo(dto.getWorkNo().shortValue());
                            staProtocol.setStaNo(dto.getStaNo().shortValue());
                            devpThread.setPakMk(staProtocol.getSiteId(), false);
                            boolean result = MessageQueue.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            boolean result = CommandUtils.offer(SlaveType.Devp, devp.getId(), new Task(2, staProtocol));
                            if (!result) {
                                throw new CoolException("更新plc站点信息失败");
                            }
@@ -1167,13 +1210,21 @@
                }
                // 获取工作档数据
                WrkMast wrkMast = wrkMastMapper.selectById(staProtocol.getWorkNo());
                if (null == wrkMast || wrkMast.getWrkSts() < 14 || wrkMast.getIoType() < 100) { continue; }
//                if (null == wrkMast || wrkMast.getWrkSts() < 14 || wrkMast.getIoType() < 100) { continue; }
                if (null == wrkMast) { continue; }
                wrkMasts.add(wrkMast);
                // 组装命令
                LedCommand ledCommand = new LedCommand();
                ledCommand.setWorkNo(wrkMast.getWrkNo());
                ledCommand.setIoType(wrkMast.getIoType());
                // 出库模式
                switch (wrkMast.getIoType()) {
                    case 1:
                        ledCommand.setTitle("全板入库");
                        break;
                    case 10:
                        ledCommand.setTitle("空板入库");
                        break;
                    case 101:
                        ledCommand.setTitle("全板出库");
                        break;
@@ -1195,10 +1246,12 @@
                        break;
                }
                ledCommand.setSourceLocNo(wrkMast.getSourceLocNo());
                ledCommand.setLocNo(wrkMast.getLocNo());
                ledCommand.setStaNo(wrkMast.getStaNo());
                if (wrkMast.getIoType() != 110) {
//                ledCommand.setSourceStaNo(wrkMast.getSourceStaNo());
                if (wrkMast.getIoType() != 110 && wrkMast.getIoType() != 10 ) {
                    List<WrkDetl> wrkDetls = wrkDetlService.findByWorkNo(wrkMast.getWrkNo());
                    wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatNo(), wrkDetl.getMatName(), wrkDetl.getQty())));
                    wrkDetls.forEach(wrkDetl -> ledCommand.getMatDtos().add(new MatDto(wrkDetl.getMatnr(), wrkDetl.getMaktx(), wrkDetl.getAnfme())));
                }
                commands.add(ledCommand);
            }
@@ -1211,7 +1264,7 @@
            }
            // 命令下发 -------------------------------------------------------------------------------
            if (!commands.isEmpty()) {
                if (!MessageQueue.offer(SlaveType.Led, led.getId(), new Task(1, commands))) {
                if (!CommandUtils.offer(SlaveType.Led, led.getId(), new Task(1, commands))) {
                    log.error("{}号LED命令下发失败！！！[ip：{}] [port：{}]", led.getId(), led.getIp(), led.getPort());
                    continue;
                } else {
@@ -1283,13 +1336,13 @@
                if (staProtocol == null) {
                    continue;
                }
                if (staProtocol.getWorkNo() != 0) {
                if (staProtocol.getWorkNo() != 0 && staProtocol.isLoading()) {
                    reset = false;
                    break;
                }
            }
            // 获取led线程
            LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getDevpPlcId());
            LedThread ledThread = (LedThread) SlaveConnection.get(SlaveType.Led, led.getId());
            // led显示默认内容
            if (reset && !ledThread.isLedMk()) {
                ledThread.setLedMk(true);
@@ -1312,10 +1365,11 @@

        // 获取工作号
        int workNo = commonService.getWorkNo(0);
        Date now = new Date();
        // 保存工作档
        WrkMast wrkMast = new WrkMast();
        wrkMast.setWrkNo(workNo);
        wrkMast.setIoTime(new Date());
        wrkMast.setIoTime(now);
        wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
        wrkMast.setIoType(11); // 入出库状态： 11.库格移载
        wrkMast.setIoPri(15D);
@@ -1329,8 +1383,8 @@
        wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
        wrkMast.setLinkMis("N");
        wrkMast.setCtnNo("Y");  // 入库阻塞库位移转标记
        wrkMast.setAppeTime(new Date());
        wrkMast.setModiTime(new Date());
        wrkMast.setAppeTime(now);
        wrkMast.setModiTime(now);
        int res = wrkMastMapper.insert(wrkMast);
        if (res == 0) {
            throw new CoolException("保存工作档失败");
@@ -1341,11 +1395,11 @@
            for (LocDetl locDetl : locDetls) {
                WrkDetl wrkDetl = new WrkDetl();
                wrkDetl.setWrkNo(workNo);
                wrkDetl.setIoTime(new Date());
                wrkDetl.setQty(locDetl.getQty());
                wrkDetl.setIoTime(now);
                wrkDetl.setAnfme(locDetl.getAnfme());
                VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
                wrkDetl.setAppeTime(new Date());
                wrkDetl.setModiTime(new Date());
                wrkDetl.setAppeTime(now);
                wrkDetl.setModiTime(now);
                if (!wrkDetlService.insert(wrkDetl)) {
                    throw new CoolException("保存工作档明细失败");
                }
@@ -1354,7 +1408,7 @@
        // 修改源库位状态
        if (shallowLoc.getLocSts().equals("D") || shallowLoc.getLocSts().equals("F")) {
            shallowLoc.setLocSts("S"); // S.入库预约，入库阻塞库位移转
            shallowLoc.setModiTime(new Date());
            shallowLoc.setModiTime(now);
            if (!locMastService.updateById(shallowLoc)){
                throw new CoolException("更新源库位状态失败");
            }
@@ -1382,147 +1436,177 @@
     * tip：同步
     */
    private void moveLocForDeepLoc(CrnSlave crn, LocMast shallowLoc){
        List<Integer> rows = locMastService.queryDistinctRow(crn.getId());
        LocMast loc = null;
        for (Integer row : rows) {
            if (Utils.isDeepLoc(slaveProperties, row)) {
                loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
        try {
            List<Integer> rows = locMastService.queryDistinctRow(crn.getId());
            LocMast loc = null;
            for (Integer row : rows) {
                if (Utils.isDeepLoc(slaveProperties, row)) {
                    loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());

                if (Utils.isDeepLoc(slaveProperties, loc.getLocNo())){
                    String shallowLocNo = Utils.getShallowLoc(slaveProperties, loc.getLocNo());
                    LocMast shallowLoc1 = locMastService.selectById(shallowLocNo);
                    if(!shallowLoc1.getLocSts().equals("O")){
                        loc = null;
                    if (loc != null) {
                        if (Utils.isDeepLoc(slaveProperties, loc.getLocNo())) {
                            String shallowLocNo = Utils.getShallowLoc(slaveProperties, loc.getLocNo());
                            LocMast shallowLoc1 = locMastService.selectById(shallowLocNo);
                            if (!shallowLoc1.getLocSts().equals("O")) {
                                loc = null;
                            }
                        }
                    }
                    if (null != loc) {
                        break;
                    }
                }

                if (null != loc) { break; }
            }
        }
        if (null == loc) {
            for (Integer row : rows) {
                if (Utils.isShallowLoc(slaveProperties, row)) {
                    loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());
                    if (null != loc) { break; }
            if (null == loc) {
                for (Integer row : rows) {
                    if (Utils.isShallowLoc(slaveProperties, row)) {
                        loc = locMastService.queryFreeLocMast(row, shallowLoc.getLocType1());

                        if (null != loc) {//对应深库位非在库状态,不能移库
                            String deepLoc = Utils.getDeepLoc(slaveProperties, loc.getLocNo());
                            LocMast deepLoc1 = locMastService.selectById(deepLoc);
                            if (!deepLoc1.getLocSts().equals("F") && !deepLoc1.getLocSts().equals("D")) {
                                loc = null;
                            }
                        }

                        if (null != loc) {
                            break;
                        }
                    }
                }
            }
        }
        if (null == loc) {
            throw new CoolException("双深库位 --- 浅库位阻塞异常！ 待移转浅库位：" + shallowLoc.getLocNo());
        }

        // 获取工作号
        int workNo = commonService.getWorkNo(0);
        // 保存工作档
        WrkMast wrkMast = new WrkMast();
        wrkMast.setWrkNo(workNo);
        wrkMast.setIoTime(new Date());
        wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
        wrkMast.setIoType(11); // 入出库状态： 11.库格移载
        wrkMast.setIoPri(13D);
        wrkMast.setCrnNo(crn.getId());
        wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
        wrkMast.setLocNo(loc.getLocNo()); // 目标库位
        wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
        wrkMast.setPicking("N"); // 拣料
        wrkMast.setExitMk("N"); // 退出
        wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D")?"Y":"N"); // 空板
        wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
        wrkMast.setLinkMis("N");
        wrkMast.setAppeTime(new Date());
        wrkMast.setModiTime(new Date());
        int res = wrkMastMapper.insert(wrkMast);
        if (res == 0) {
            throw new CoolException("保存工作档失败");
        }
        // 工作档明细保存
        if (shallowLoc.getLocSts().equals("F")) {
            List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
            for (LocDetl locDetl : locDetls) {
                WrkDetl wrkDetl = new WrkDetl();
                wrkDetl.setWrkNo(workNo);
                wrkDetl.setIoTime(new Date());
                wrkDetl.setQty(locDetl.getQty());
                VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
                wrkDetl.setAppeTime(new Date());
                wrkDetl.setModiTime(new Date());
                if (!wrkDetlService.insert(wrkDetl)) {
                    throw new CoolException("保存工作档明细失败");
            if (null == loc) {
                log.error("双深库位 --- 浅库位阻塞异常！ 待移转浅库位：" + shallowLoc.getLocNo());
                throw new CoolException("双深库位 --- 浅库位阻塞异常！ 待移转浅库位：" + shallowLoc.getLocNo());
            }

            // 获取工作号
            int workNo = commonService.getWorkNo(0);
            // 保存工作档
            WrkMast wrkMast = new WrkMast();
            wrkMast.setWrkNo(workNo);
            wrkMast.setIoTime(new Date());
            wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
            wrkMast.setIoType(11); // 入出库状态： 11.库格移载
            wrkMast.setIoPri(13D);
            wrkMast.setCrnNo(crn.getId());
            wrkMast.setSourceLocNo(shallowLoc.getLocNo()); // 源库位
            wrkMast.setLocNo(loc.getLocNo()); // 目标库位
            wrkMast.setFullPlt(shallowLoc.getFullPlt()); // 满板
            wrkMast.setPicking("N"); // 拣料
            wrkMast.setExitMk("N"); // 退出
            wrkMast.setEmptyMk(shallowLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
            wrkMast.setBarcode(shallowLoc.getBarcode()); // 托盘码
            wrkMast.setLinkMis("N");
            wrkMast.setAppeTime(new Date());
            wrkMast.setModiTime(new Date());
            int res = wrkMastMapper.insert(wrkMast);
            if (res == 0) {
                throw new CoolException("保存工作档失败");
            }
            // 工作档明细保存
            if (shallowLoc.getLocSts().equals("F")) {
                List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", shallowLoc.getLocNo()));
                for (LocDetl locDetl : locDetls) {
                    WrkDetl wrkDetl = new WrkDetl();
                    wrkDetl.setWrkNo(workNo);
                    wrkDetl.setIoTime(new Date());
                    wrkDetl.setAnfme(locDetl.getAnfme());
                    VersionUtils.setWrkDetl(wrkDetl, locDetl); // 版本控制
                    wrkDetl.setAppeTime(new Date());
                    wrkDetl.setModiTime(new Date());
                    if (!wrkDetlService.insert(wrkDetl)) {
                        throw new CoolException("保存工作档明细失败");
                    }
                }
            }
        }
        // 修改源库位状态
        if (shallowLoc.getLocSts().equals("D") || shallowLoc.getLocSts().equals("F")) {
            shallowLoc.setLocSts("R"); // R.出库预约
            shallowLoc.setModiTime(new Date());
            if (!locMastService.updateById(shallowLoc)){
                throw new CoolException("更新源库位状态失败");
            // 修改源库位状态
            if (shallowLoc.getLocSts().equals("D") || shallowLoc.getLocSts().equals("F")) {
                shallowLoc.setLocSts("R"); // R.出库预约
                shallowLoc.setModiTime(new Date());
                if (!locMastService.updateById(shallowLoc)) {
                    throw new CoolException("更新源库位状态失败");
                }
            } else {
                throw new CoolException("源库位出库失败");
            }
        } else {
            throw new CoolException("源库位出库失败");
        }
        // 修改目标库位状态
        if (loc.getLocSts().equals("O")) {
            loc.setLocSts("S"); // S.入库预约
            loc.setModiTime(new Date());
            if (!locMastService.updateById(loc)) {
                throw new CoolException("更新目标库位状态失败");
            // 修改目标库位状态
            if (loc.getLocSts().equals("O")) {
                loc.setLocSts("S"); // S.入库预约
                loc.setModiTime(new Date());
                if (!locMastService.updateById(loc)) {
                    throw new CoolException("更新目标库位状态失败");
                }
            } else {
                throw new CoolException("移转失败");
            }
        } else {
            throw new CoolException("移转失败");
        } catch (Exception e) {
            log.error("双深库位阻塞，对浅库位进行移转失败", e);
            e.printStackTrace();
            TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
        }

    }

    /**
     * 堆垛机演示  ===>> 库位移转
     */
    public synchronized void crnDemoOfLocMove1(){
        for (CrnSlave crn : slaveProperties.getCrn()) {
            if (!crn.getDemo()) { continue; }   // 必须为演示状态
        try {
            for (CrnSlave crn : slaveProperties.getCrn()) {
                if (!crn.getDemo()) {
                    continue;
                }   // 必须为演示状态

            CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
            CrnProtocol crnProtocol = crnThread.getCrnProtocol();
            if (crnProtocol == null) { continue; }

            // 只有当堆垛机空闲 并且 无任务时才继续执行
            if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
                // 获取移库工作档信息
                WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
                if (null != wrkMast) { continue; }

                LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
                LocMast loc = locMastService.queryDemoLoc(crn.getId());
                if (null == sourceLoc || null == loc) { continue; }

                String sourceLocNo = sourceLoc.getLocNo();
                String locNo = loc.getLocNo();

                // 获取工作号
                int workNo = commonService.getWorkNo(0);
                // 保存工作档
                wrkMast = new WrkMast();
                wrkMast.setWrkNo(workNo);
                wrkMast.setIoTime(new Date());
                wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
                wrkMast.setIoType(11); // 入出库状态： 11.库格移载
                wrkMast.setIoPri(13D);
                wrkMast.setCrnNo(crn.getId());
                wrkMast.setSourceLocNo(sourceLocNo); // 源库位
                wrkMast.setLocNo(locNo); // 目标库位
                wrkMast.setFullPlt("N"); // 满板：Y
                wrkMast.setPicking("N"); // 拣料
                wrkMast.setExitMk("N"); // 退出
                wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D")?"Y":"N"); // 空板
                wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
                wrkMast.setLinkMis("N");
                wrkMast.setAppeTime(new Date());
                wrkMast.setModiTime(new Date());
                int res = wrkMastMapper.insert(wrkMast);
                if (res == 0) {
                    throw new CoolException("保存工作档失败");
                CrnThread crnThread = (CrnThread) SlaveConnection.get(SlaveType.Crn, crn.getId());
                CrnProtocol crnProtocol = crnThread.getCrnProtocol();
                if (crnProtocol == null) {
                    continue;
                }
                // 工作档明细保存

                // 只有当堆垛机空闲 并且 无任务时才继续执行
                if (crnProtocol.getStatusType() == CrnStatusType.IDLE && crnProtocol.getTaskNo() == 0 && crnProtocol.getModeType() == CrnModeType.AUTO) {
                    // 获取移库工作档信息
                    WrkMast wrkMast = wrkMastMapper.selectLocMove(crn.getId());
                    if (null != wrkMast) {
                        continue;
                    }

                    LocMast sourceLoc = locMastService.queryDemoSourceLoc(crn.getId());
                    LocMast loc = locMastService.queryDemoLoc(crn.getId());
                    if (null == sourceLoc || null == loc) {
                        continue;
                    }

                    String sourceLocNo = sourceLoc.getLocNo();
                    String locNo = loc.getLocNo();

                    // 获取工作号
                    int workNo = commonService.getWorkNo(0);
                    // 保存工作档
                    wrkMast = new WrkMast();
                    wrkMast.setWrkNo(workNo);
                    wrkMast.setIoTime(new Date());
                    wrkMast.setWrkSts(11L); // 工作状态：11.生成出库ID
                    wrkMast.setIoType(11); // 入出库状态： 11.库格移载
                    wrkMast.setIoPri(13D);
                    wrkMast.setCrnNo(crn.getId());
                    wrkMast.setSourceLocNo(sourceLocNo); // 源库位
                    wrkMast.setLocNo(locNo); // 目标库位
                    wrkMast.setFullPlt("N"); // 满板：Y
                    wrkMast.setPicking("N"); // 拣料
                    wrkMast.setExitMk("N"); // 退出
                    wrkMast.setEmptyMk(sourceLoc.getLocSts().equals("D") ? "Y" : "N"); // 空板
                    wrkMast.setBarcode(sourceLoc.getBarcode()); // 托盘码
                    wrkMast.setLinkMis("N");
                    wrkMast.setAppeTime(new Date());
                    wrkMast.setModiTime(new Date());
                    int res = wrkMastMapper.insert(wrkMast);
                    if (res == 0) {
                        throw new CoolException("保存工作档失败");
                    }
                    // 工作档明细保存
//                List<LocDetl> locDetls = locDetlService.selectList(new EntityWrapper<LocDetl>().eq("loc_no", sourceLocNo));
//                for (LocDetl locDetl : locDetls) {
//                    WrkDetl wrkDetl = new WrkDetl();
@@ -1536,29 +1620,33 @@
//                        throw new CoolException("保存工作档明细失败");
//                    }
//                }
                // 修改源库位状态
                if (sourceLoc.getLocSts().equals("D")) {
                    sourceLoc.setLocSts("R"); // R.出库预约
                    sourceLoc.setModiTime(new Date());
                    if (!locMastService.updateById(sourceLoc)){
                        throw new CoolException("更新源库位状态失败");
                    // 修改源库位状态
                    if (sourceLoc.getLocSts().equals("D")) {
                        sourceLoc.setLocSts("R"); // R.出库预约
                        sourceLoc.setModiTime(new Date());
                        if (!locMastService.updateById(sourceLoc)) {
                            throw new CoolException("更新源库位状态失败");
                        }
                    } else {
                        throw new CoolException("源库位出库失败");
                    }
                } else {
                    throw new CoolException("源库位出库失败");
                }
                // 修改目标库位状态
                if (loc.getLocSts().equals("O")) {
                    loc.setLocSts("S"); // S.入库预约
                    loc.setModiTime(new Date());
                    if (!locMastService.updateById(loc)) {
                        throw new CoolException("更新目标库位状态失败");
                    // 修改目标库位状态
                    if (loc.getLocSts().equals("O")) {
                        loc.setLocSts("S"); // S.入库预约
                        loc.setModiTime(new Date());
                        if (!locMastService.updateById(loc)) {
                            throw new CoolException("更新目标库位状态失败");
                        }
                    } else {
                        throw new CoolException("移转失败");
                    }
                } else {
                    throw new CoolException("移转失败");
                }

                }
            }

        } catch (Exception e) {
            log.error("堆垛机演示  ===>> 库位移转失败", e);
            e.printStackTrace();
            TransactionAspectSupport.currentTransactionStatus().setRollbackOnly();
        }
    }

@@ -1619,22 +1707,33 @@
            for (DevpSlave devp : slaveProperties.getDevp()) {
                SiemensDevpThread devpThread = (SiemensDevpThread) SlaveConnection.get(SlaveType.Devp, devp.getId());

                WrkMast pakout = wrkMastMapper.selectWorkingPakout();
                if (pakout != null) {
                    if (devpThread.ioMode != IoModeType.PAKOUT_MODE) {
                        // 出库切换中
                        devpThread.ioMode = IoModeType.PAKOUT_BOOTING;

                        WrkMast pakin = wrkMastMapper.selectWorkingPakin();
                        if (pakin == null && !devpThread.getStation().get(201).isLoading() && !devpThread.getStation().get(202).isLoading()) {
                            // 出库模式
                            devpThread.ioMode = IoModeType.PAKOUT_MODE;
                        }
                for (DevpSlave.Sta inSta : devp.getInSta()) {
                    if (inSta.getStaNo() == 2) {
                        continue;
                    }
                } else {
                    // 入库模式
                    devpThread.ioMode = IoModeType.PAKIN_MODE;
                    WrkMast pakout = wrkMastMapper.selectWorkingPakout(inSta.getStaNo());
                    switch (inSta.getStaNo()) {
                        case 203://1F
                            if (pakout != null) {
                                if (devpThread.ioModeOf2F != IoModeType.PAKOUT_MODE) {
                                    // 出库切换中
                                    devpThread.ioModeOf2F = IoModeType.PAKOUT_BOOTING;
                                    WrkMast pakin = wrkMastMapper.selectWorkingPakin(inSta.getStaNo());
                                    if (pakin == null && !devpThread.getStation().get(inSta.getStaNo()).isLoading()
                                            && !devpThread.getStation().get(inSta.getStaNo()+1).isLoading()
                                            && devpThread.getStation().get(inSta.getStaNo()+1).getWorkNo()==0) {
                                        // 出库模式
                                        devpThread.ioModeOf2F = IoModeType.PAKOUT_MODE;
                                    }
                                }
                            } else {
                                // 入库模式
                                devpThread.ioModeOf2F = IoModeType.PAKIN_MODE;
                            }
                            break;
                    }
                }

            }

        } catch (Exception e) {
@@ -1644,5 +1743,18 @@

    }

    public void outOfDevp() {
        List<WrkMast> wrkMasts = wrkMastMapper.selectPick();
        for (WrkMast wrkMast : wrkMasts) {
            if (basDevpService.selectCount(new EntityWrapper<BasDevp>().eq("wrk_no", wrkMast.getWrkNo())) == 0) {
                wrkMast.setCtnNo("Y");
                if (wrkMastMapper.updateById(wrkMast) == 0) {
                    log.error("修改{}工作档失败，ctn_no", wrkMast.getWrkNo());
                }
            }

        }
    }


}